! Started logfile: J0336-3616_X_2002_05_14_yyk_uvs.log on Tue Jun 26 22:07:52 2007 obs J0336-3616_X_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0336-3616_X_2002_05_14_yyk_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.559877 visibilities/baseline/integration-bin. ! Found source: J0336-3616 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1076 lines of history. ! ! Reading 3628 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0336-3616_X_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.32581 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7807 mas, bmaj=5.492 mas, bpa=23.46 degrees ! Estimated noise=3164.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.130151 Jy ! Component: 100 - total flux cleaned = 0.17303 Jy ! Total flux subtracted in 100 components = 0.17303 Jy ! Clean residual min=-0.018996 max=0.025235 Jy/beam ! Clean residual mean=-0.000351 rms=0.005840 Jy/beam ! Combined flux in latest and established models = 0.17303 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.17303 Jy ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.289847Jy sigma=0.001373 ! Fit after self-cal, rms=0.288808Jy sigma=0.001370 ! Inverting map and beam ! Estimated beam: bmin=0.7807 mas, bmaj=5.492 mas, bpa=23.46 degrees ! Estimated noise=3164.23 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9663 mas, bmaj=6.371 mas, bpa=22.86 degrees ! Estimated noise=1899.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0341703 Jy ! Component: 100 - total flux cleaned = 0.0494607 Jy ! Component: 150 - total flux cleaned = 0.0569021 Jy ! Component: 200 - total flux cleaned = 0.0597701 Jy ! Total flux subtracted in 200 components = 0.0597701 Jy ! Clean residual min=-0.011525 max=0.014849 Jy/beam ! Clean residual mean=-0.000122 rms=0.004115 Jy/beam ! Combined flux in latest and established models = 0.232801 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 65 model components to the UV plane model. ! The established model now contains 86 components and 0.232801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287093Jy sigma=0.001348 ! Fit after self-cal, rms=0.287098Jy sigma=0.001347 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9663 x 6.371 at 22.86 degrees (North through East) ! Clean map min=-0.010959 max=0.14262 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Fit before self-cal, rms=0.287098Jy sigma=0.001347 ! Fit after self-cal, rms=0.287098Jy sigma=0.001347 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287098Jy sigma=0.001347 ! Fit after self-cal, rms=0.287098Jy sigma=0.001347 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9663 mas, bmaj=6.371 mas, bpa=22.86 degrees ! Estimated noise=1899.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166842 Jy ! Component: 100 - total flux cleaned = 0.00253563 Jy ! Component: 150 - total flux cleaned = 0.00328097 Jy ! Component: 200 - total flux cleaned = 0.0040671 Jy ! Total flux subtracted in 200 components = 0.0040671 Jy ! Clean residual min=-0.011378 max=0.014544 Jy/beam ! Clean residual mean=-0.000084 rms=0.004035 Jy/beam ! Combined flux in latest and established models = 0.236868 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 97 components and 0.236868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286955Jy sigma=0.001346 ! Fit after self-cal, rms=0.286946Jy sigma=0.001346 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286946Jy sigma=0.001346 ! Fit after self-cal, rms=0.282384Jy sigma=0.001305 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00762929 Jy ! Component: 100 - total flux cleaned = 0.00918252 Jy ! Component: 150 - total flux cleaned = 0.00944282 Jy ! Component: 200 - total flux cleaned = 0.00932815 Jy ! Total flux subtracted in 200 components = 0.00932815 Jy ! Clean residual min=-0.010555 max=0.011903 Jy/beam ! Clean residual mean=-0.000173 rms=0.003615 Jy/beam ! Combined flux in latest and established models = 0.246196 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 121 components and 0.246196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282267Jy sigma=0.001303 ! Fit after self-cal, rms=0.281431Jy sigma=0.001296 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9663 x 6.371 at 22.86 degrees (North through East) ! Clean map min=-0.010566 max=0.14585 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281431Jy sigma=0.001296 ! Fit after self-cal, rms=0.281431Jy sigma=0.001296 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281431Jy sigma=0.001296 ! Fit after self-cal, rms=0.281091Jy sigma=0.001294 ! Inverting map and beam ! Estimated beam: bmin=0.9663 mas, bmaj=6.371 mas, bpa=22.86 degrees ! Estimated noise=1899.91 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221625 Jy ! Component: 100 - total flux cleaned = 0.00317865 Jy ! Component: 150 - total flux cleaned = 0.00327968 Jy ! Component: 200 - total flux cleaned = 0.00328206 Jy ! Total flux subtracted in 200 components = 0.00328206 Jy ! Clean residual min=-0.010673 max=0.011262 Jy/beam ! Clean residual mean=-0.000174 rms=0.003502 Jy/beam ! Combined flux in latest and established models = 0.249478 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 124 components and 0.249478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281004Jy sigma=0.001294 ! Fit after self-cal, rms=0.280762Jy sigma=0.001293 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.280762Jy sigma=0.001293 ! Fit after self-cal, rms=0.285927Jy sigma=0.001293 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285927Jy sigma=0.001293 ! Fit after self-cal, rms=0.285823Jy sigma=0.001293 ! Inverting map and beam ! Estimated beam: bmin=0.967 mas, bmaj=6.428 mas, bpa=22.84 degrees ! Estimated noise=1900.51 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000503368 Jy ! Component: 100 - total flux cleaned = -0.000409274 Jy ! Component: 150 - total flux cleaned = -0.000324349 Jy ! Component: 200 - total flux cleaned = -0.000402906 Jy ! Total flux subtracted in 200 components = -0.000402906 Jy ! Clean residual min=-0.010251 max=0.011318 Jy/beam ! Clean residual mean=-0.000182 rms=0.003385 Jy/beam ! Combined flux in latest and established models = 0.249075 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 131 components and 0.249075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285765Jy sigma=0.001292 ! Fit after self-cal, rms=0.285700Jy sigma=0.001292 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.27 mas, bmaj=10.33 mas, bpa=11.32 degrees ! Estimated noise=2275.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00441143 Jy ! Component: 100 - total flux cleaned = 0.00485969 Jy ! Component: 150 - total flux cleaned = 0.00514061 Jy ! Component: 200 - total flux cleaned = 0.00547584 Jy ! Total flux subtracted in 200 components = 0.00547584 Jy ! Clean residual min=-0.010860 max=0.013583 Jy/beam ! Clean residual mean=-0.000229 rms=0.004182 Jy/beam ! Combined flux in latest and established models = 0.254551 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 136 components and 0.254551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285844Jy sigma=0.001292 ! Fit after self-cal, rms=0.285815Jy sigma=0.001292 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7814 mas, bmaj=5.506 mas, bpa=23.45 degrees ! Estimated noise=3175.08 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.137679 Jy ! Component: 100 - total flux cleaned = 0.180397 Jy ! Component: 150 - total flux cleaned = 0.205528 Jy ! Component: 200 - total flux cleaned = 0.219474 Jy ! Total flux subtracted in 200 components = 0.219474 Jy ! Clean residual min=-0.014330 max=0.014136 Jy/beam ! Clean residual mean=-0.000207 rms=0.004008 Jy/beam ! Combined flux in latest and established models = 0.219474 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.219474 Jy ! Inverting map and beam ! Estimated beam: bmin=0.967 mas, bmaj=6.428 mas, bpa=22.84 degrees ! Estimated noise=1900.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152637 Jy ! Component: 100 - total flux cleaned = 0.0203757 Jy ! Component: 150 - total flux cleaned = 0.024048 Jy ! Component: 200 - total flux cleaned = 0.0261418 Jy ! Total flux subtracted in 200 components = 0.0261418 Jy ! Clean residual min=-0.010660 max=0.011873 Jy/beam ! Clean residual mean=-0.000228 rms=0.003444 Jy/beam ! Combined flux in latest and established models = 0.245616 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 76 components and 0.245616 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.27 mas, bmaj=10.33 mas, bpa=11.32 degrees ! Estimated noise=2275.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00568577 Jy ! Component: 100 - total flux cleaned = 0.0089267 Jy ! Component: 150 - total flux cleaned = 0.00941912 Jy ! Component: 200 - total flux cleaned = 0.0096923 Jy ! Total flux subtracted in 200 components = 0.0096923 Jy ! Clean residual min=-0.010753 max=0.013778 Jy/beam ! Clean residual mean=-0.000240 rms=0.004223 Jy/beam ! Combined flux in latest and established models = 0.255308 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 82 components and 0.255308 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.967 mas, bmaj=6.428 mas, bpa=22.84 degrees ! Estimated noise=1900.51 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00195041 Jy ! Component: 100 - total flux cleaned = -0.00295507 Jy ! Component: 150 - total flux cleaned = -0.00322879 Jy ! Component: 200 - total flux cleaned = -0.0034848 Jy ! Total flux subtracted in 200 components = -0.0034848 Jy ! Clean residual min=-0.010226 max=0.011290 Jy/beam ! Clean residual mean=-0.000168 rms=0.003366 Jy/beam ! Combined flux in latest and established models = 0.251823 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 98 components and 0.251823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285811Jy sigma=0.001292 ! Fit after self-cal, rms=0.285741Jy sigma=0.001292 wmodel J0336-3616_X_2002_05_14_yyk\_map.mod ! Writing 98 model components to file: J0336-3616_X_2002_05_14_yyk_map.mod wobs J0336-3616_X_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0336-3616_X_2002_05_14_yyk_uvs.fits wwins J0336-3616_X_2002_05_14_yyk\_map.win ! wwins: Wrote 1 windows to J0336-3616_X_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307741 Jy ! Component: 100 - total flux cleaned = 0.00525636 Jy ! Component: 150 - total flux cleaned = 0.00706017 Jy ! Component: 200 - total flux cleaned = 0.0071968 Jy ! Component: 250 - total flux cleaned = 0.00732548 Jy ! Component: 300 - total flux cleaned = 0.00720755 Jy ! Component: 350 - total flux cleaned = 0.00698293 Jy ! Component: 400 - total flux cleaned = 0.006987 Jy ! Component: 450 - total flux cleaned = 0.00698411 Jy ! Component: 500 - total flux cleaned = 0.00727433 Jy ! Component: 550 - total flux cleaned = 0.00755094 Jy ! Component: 600 - total flux cleaned = 0.0078163 Jy ! Component: 650 - total flux cleaned = 0.0077267 Jy ! Component: 700 - total flux cleaned = 0.00772636 Jy ! Component: 750 - total flux cleaned = 0.00772411 Jy ! Component: 800 - total flux cleaned = 0.00772545 Jy ! Component: 850 - total flux cleaned = 0.0081788 Jy ! Component: 900 - total flux cleaned = 0.00854584 Jy ! Component: 950 - total flux cleaned = 0.00904748 Jy ! Component: 1000 - total flux cleaned = 0.00939737 Jy ! Component: 1050 - total flux cleaned = 0.00980613 Jy ! Component: 1100 - total flux cleaned = 0.0102067 Jy ! Component: 1150 - total flux cleaned = 0.0103379 Jy ! Component: 1200 - total flux cleaned = 0.0106583 Jy ! Component: 1250 - total flux cleaned = 0.01091 Jy ! Component: 1300 - total flux cleaned = 0.0112824 Jy ! Component: 1350 - total flux cleaned = 0.0117721 Jy ! Component: 1400 - total flux cleaned = 0.012014 Jy ! Component: 1450 - total flux cleaned = 0.012551 Jy ! Component: 1500 - total flux cleaned = 0.0129046 Jy ! Component: 1550 - total flux cleaned = 0.013312 Jy ! Component: 1600 - total flux cleaned = 0.0138309 Jy ! Component: 1650 - total flux cleaned = 0.0142301 Jy ! Component: 1700 - total flux cleaned = 0.0145695 Jy ! Component: 1750 - total flux cleaned = 0.0150165 Jy ! Component: 1800 - total flux cleaned = 0.0152935 Jy ! Component: 1850 - total flux cleaned = 0.0156233 Jy ! Component: 1900 - total flux cleaned = 0.0159501 Jy ! Component: 1950 - total flux cleaned = 0.0162199 Jy ! Component: 2000 - total flux cleaned = 0.0165951 Jy ! Total flux subtracted in 2048 components = 0.016861 Jy ! Clean residual min=-0.002880 max=0.003254 Jy/beam ! Clean residual mean=-0.000004 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.268684 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 235 components and 0.268684 Jy ![Exited script file: muppet] wmap "J0336-3616_X_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.967 x 6.428 at 22.84 degrees (North through East) ! Clean map min=-0.0096454 max=0.14872 Jy/beam ! Writing clean map to FITS file: J0336-3616_X_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.148722 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00105593 device "J0336-3616_X_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0336-3616_X_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.13 2.13 4.26 8.51999 17.04 34.08 68.1599 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0031 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.148 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.967 x 6.428 at 22.84 degrees (North through East) ! Clean map min=-0.0096454 max=0.14872 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0336-3616_X_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0336-3616_X_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0336-3616_X_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:07:58 2007