! Started logfile: J0326-3243_S_2002_01_31_yyk_uvs.log on Tue Jun 26 22:06:58 2007
obs J0326-3243_S_2002_01_31_yyk_uva.fits
! Reading UV FITS file: J0326-3243_S_2002_01_31_yyk_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.130769 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0326-3243
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22947e+09        8e+06          1        8e+06
!  02        2  2.25947e+09        8e+06          1        8e+06
!  03        3  2.34947e+09        8e+06          1        8e+06
!  04        4  2.36947e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1225 lines of history.
! 
! Reading 1224 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0326-3243_S_2002_01_31_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.185689 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.24 mas, bmaj=70.66 mas, bpa=13.63 degrees
! Estimated noise=3044.44 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0257227 Jy
! Component: 100  -  total flux cleaned = 0.0274354 Jy
! Total flux subtracted in 100 components = 0.0274354 Jy
! Clean residual min=-0.004871 max=0.004990 Jy/beam
! Clean residual mean=-0.000096 rms=0.002458 Jy/beam
! Combined flux in latest and established models = 0.0274354 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 49 model components to the UV plane model.
! The established model now contains 49 components and 0.0274354 Jy
! 
! Correcting IF 1.
!  A total of 314 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 415 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 314 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 314 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.179477Jy  sigma=0.001447
! Fit after  self-cal, rms=0.178543Jy  sigma=0.001437
! Inverting map and beam 
! Estimated beam: bmin=10.24 mas, bmaj=70.75 mas, bpa=13.62 degrees
! Estimated noise=3047.76 mJy/beam.
! Added new window around map position (-0.5, 0.5).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00615591 Jy
! Component: 100  -  total flux cleaned = 0.00717753 Jy
! Total flux subtracted in 100 components = 0.00717753 Jy
! Clean residual min=-0.008628 max=0.005198 Jy/beam
! Clean residual mean=-0.000276 rms=0.002370 Jy/beam
! Combined flux in latest and established models = 0.0346129 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 42 model components to the UV plane model.
! The established model now contains 88 components and 0.0346129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177956Jy  sigma=0.001431
! Fit after  self-cal, rms=0.177908Jy  sigma=0.001431
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.59 mas, bmaj=76.8 mas, bpa=14.39 degrees
! Estimated noise=2644.7 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00245594 Jy
! Component: 100  -  total flux cleaned = -0.00261078 Jy
! Component: 150  -  total flux cleaned = -0.00290495 Jy
! Component: 200  -  total flux cleaned = -0.00371754 Jy
! Total flux subtracted in 200 components = -0.00371754 Jy
! Clean residual min=-0.007108 max=0.004903 Jy/beam
! Clean residual mean=-0.000203 rms=0.001979 Jy/beam
! Combined flux in latest and established models = 0.0308954 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 65 model components to the UV plane model.
! The established model now contains 151 components and 0.0308954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177843Jy  sigma=0.001430
! Fit after  self-cal, rms=0.177770Jy  sigma=0.001430
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.59 x 76.8 at 14.39 degrees (North through East)
! Clean map  min=-0.011328  max=0.049553 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 105 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    SC        0.00*    
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.991118
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.99     HN        1.00*    KP        1.04     
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.17     
!   PT        0.89     SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.177770Jy  sigma=0.001430
! Fit after  self-cal, rms=0.178987Jy  sigma=0.001420
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.178987Jy  sigma=0.001420
! Fit after  self-cal, rms=0.178948Jy  sigma=0.001420
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.07 mas, bmaj=75.69 mas, bpa=14.26 degrees
! Estimated noise=2815.65 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000545065 Jy
! Component: 100  -  total flux cleaned = -0.0017537 Jy
! Component: 150  -  total flux cleaned = -0.00173365 Jy
! Component: 200  -  total flux cleaned = -0.00135725 Jy
! Total flux subtracted in 200 components = -0.00135725 Jy
! Clean residual min=-0.007971 max=0.006714 Jy/beam
! Clean residual mean=-0.000080 rms=0.002769 Jy/beam
! Combined flux in latest and established models = 0.0295381 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 82 model components to the UV plane model.
! The established model now contains 230 components and 0.0295381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.178782Jy  sigma=0.001418
! Fit after  self-cal, rms=0.178715Jy  sigma=0.001418
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.178715Jy  sigma=0.001418
! Fit after  self-cal, rms=0.176801Jy  sigma=0.001402
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00636828 Jy
! Component: 100  -  total flux cleaned = 0.00776957 Jy
! Component: 150  -  total flux cleaned = 0.00947819 Jy
! Component: 200  -  total flux cleaned = 0.0108951 Jy
! Total flux subtracted in 200 components = 0.0108951 Jy
! Clean residual min=-0.008742 max=0.005944 Jy/beam
! Clean residual mean=-0.000229 rms=0.002422 Jy/beam
! Combined flux in latest and established models = 0.0404332 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 64 model components to the UV plane model.
! The established model now contains 292 components and 0.0404332 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.176441Jy  sigma=0.001399
! Fit after  self-cal, rms=0.175300Jy  sigma=0.001392
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.07 x 75.69 at 14.26 degrees (North through East)
! Clean map  min=-0.010467  max=0.055328 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.69 mas, bmaj=75.41 mas, bpa=14 degrees
! Estimated noise=2829.11 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00156103 Jy
! Component: 100  -  total flux cleaned = -0.000791169 Jy
! Component: 150  -  total flux cleaned = -2.96541e-05 Jy
! Component: 200  -  total flux cleaned = 0.000772151 Jy
! Total flux subtracted in 200 components = 0.000772151 Jy
! Clean residual min=-0.006529 max=0.003813 Jy/beam
! Clean residual mean=-0.000204 rms=0.001622 Jy/beam
! Combined flux in latest and established models = 0.0412053 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 78 model components to the UV plane model.
! The established model now contains 361 components and 0.0412054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175104Jy  sigma=0.001390
! Fit after  self-cal, rms=0.174363Jy  sigma=0.001385
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.32 mas, bmaj=70.43 mas, bpa=13.58 degrees
! Estimated noise=3273.19 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0594433 Jy
! Component: 100  -  total flux cleaned = 0.0634099 Jy
! Component: 150  -  total flux cleaned = 0.0641669 Jy
! Component: 200  -  total flux cleaned = 0.0629874 Jy
! Total flux subtracted in 200 components = 0.0629874 Jy
! Clean residual min=-0.010202 max=0.008965 Jy/beam
! Clean residual mean=-0.000243 rms=0.003237 Jy/beam
! Combined flux in latest and established models = 0.0629874 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 47 model components to the UV plane model.
! The established model now contains 47 components and 0.0629874 Jy
! Inverting map and beam 
! Estimated beam: bmin=12.07 mas, bmaj=75.69 mas, bpa=14.26 degrees
! Estimated noise=2815.65 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00661859 Jy
! Component: 100  -  total flux cleaned = 0.00676468 Jy
! Component: 150  -  total flux cleaned = 0.00564932 Jy
! Component: 200  -  total flux cleaned = 0.00472858 Jy
! Total flux subtracted in 200 components = 0.00472858 Jy
! Clean residual min=-0.009013 max=0.008288 Jy/beam
! Clean residual mean=-0.000016 rms=0.003223 Jy/beam
! Combined flux in latest and established models = 0.067716 Jy
! Adding 74 model components to the UV plane model.
! The established model now contains 118 components and 0.067716 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.69 mas, bmaj=75.41 mas, bpa=14 degrees
! Estimated noise=2829.11 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00080397 Jy
! Component: 100  -  total flux cleaned = -0.00206189 Jy
! Component: 150  -  total flux cleaned = -0.00311507 Jy
! Component: 200  -  total flux cleaned = -0.00393736 Jy
! Total flux subtracted in 200 components = -0.00393736 Jy
! Clean residual min=-0.008630 max=0.007205 Jy/beam
! Clean residual mean=-0.000054 rms=0.002942 Jy/beam
! Combined flux in latest and established models = 0.0637786 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 171 components and 0.0637786 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=12.07 mas, bmaj=75.69 mas, bpa=14.26 degrees
! Estimated noise=2815.65 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000454078 Jy
! Component: 100  -  total flux cleaned = -0.000643495 Jy
! Component: 150  -  total flux cleaned = -0.00082497 Jy
! Component: 200  -  total flux cleaned = -0.00106094 Jy
! Total flux subtracted in 200 components = -0.00106094 Jy
! Clean residual min=-0.008559 max=0.007098 Jy/beam
! Clean residual mean=-0.000070 rms=0.002852 Jy/beam
! Combined flux in latest and established models = 0.0627177 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 40 model components to the UV plane model.
! The established model now contains 201 components and 0.0627177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.174506Jy  sigma=0.001386
! Fit after  self-cal, rms=0.173879Jy  sigma=0.001381
wmodel J0326-3243_S_2002_01_31_yyk\_map.mod
! Writing 201 model components to file: J0326-3243_S_2002_01_31_yyk_map.mod
wobs J0326-3243_S_2002_01_31_yyk\_uvs.fits
! Writing UV FITS file: J0326-3243_S_2002_01_31_yyk_uvs.fits
wwins J0326-3243_S_2002_01_31_yyk\_map.win
! wwins: Wrote 1 windows to J0326-3243_S_2002_01_31_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00136148 Jy
! Component: 100  -  total flux cleaned = -0.00145483 Jy
! Component: 150  -  total flux cleaned = -0.00152218 Jy
! Component: 200  -  total flux cleaned = -0.00184744 Jy
! Component: 250  -  total flux cleaned = -0.00202405 Jy
! Component: 300  -  total flux cleaned = -0.00191592 Jy
! Component: 350  -  total flux cleaned = -0.00170918 Jy
! Component: 400  -  total flux cleaned = -0.00146541 Jy
! Component: 450  -  total flux cleaned = -0.0013266 Jy
! Component: 500  -  total flux cleaned = -0.00132281 Jy
! Component: 550  -  total flux cleaned = -0.00149148 Jy
! Component: 600  -  total flux cleaned = -0.0016121 Jy
! Component: 650  -  total flux cleaned = -0.0016908 Jy
! Component: 700  -  total flux cleaned = -0.00180486 Jy
! Component: 750  -  total flux cleaned = -0.00191562 Jy
! Component: 800  -  total flux cleaned = -0.00202379 Jy
! Component: 850  -  total flux cleaned = -0.00216421 Jy
! Component: 900  -  total flux cleaned = -0.00226678 Jy
! Component: 950  -  total flux cleaned = -0.00239988 Jy
! Component: 1000  -  total flux cleaned = -0.00252966 Jy
! Component: 1050  -  total flux cleaned = -0.00265573 Jy
! Component: 1100  -  total flux cleaned = -0.00277882 Jy
! Component: 1150  -  total flux cleaned = -0.0028991 Jy
! Component: 1200  -  total flux cleaned = -0.00304585 Jy
! Component: 1250  -  total flux cleaned = -0.00318963 Jy
! Component: 1300  -  total flux cleaned = -0.00333115 Jy
! Component: 1350  -  total flux cleaned = -0.00344223 Jy
! Component: 1400  -  total flux cleaned = -0.00355168 Jy
! Component: 1450  -  total flux cleaned = -0.00363292 Jy
! Component: 1500  -  total flux cleaned = -0.00376644 Jy
! Component: 1550  -  total flux cleaned = -0.00387178 Jy
! Component: 1600  -  total flux cleaned = -0.00397584 Jy
! Component: 1650  -  total flux cleaned = -0.00410419 Jy
! Component: 1700  -  total flux cleaned = -0.00423054 Jy
! Component: 1750  -  total flux cleaned = -0.00433045 Jy
! Component: 1800  -  total flux cleaned = -0.00442914 Jy
! Component: 1850  -  total flux cleaned = -0.00455109 Jy
! Component: 1900  -  total flux cleaned = -0.00469643 Jy
! Component: 1950  -  total flux cleaned = -0.00479252 Jy
! Component: 2000  -  total flux cleaned = -0.00491169 Jy
! Total flux subtracted in 2048 components = -0.0050065 Jy
! Clean residual min=-0.001289 max=0.001312 Jy/beam
! Clean residual mean=-0.000041 rms=0.000632 Jy/beam
! Combined flux in latest and established models = 0.0577112 Jy
keep
! Adding 244 model components to the UV plane model.
! The established model now contains 445 components and 0.0577112 Jy
![Exited script file: muppet]
wmap "J0326-3243_S_2002_01_31_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.07 x 75.69 at 14.26 degrees (North through East)
! Clean map  min=-0.0094358  max=0.060103 Jy/beam
! Writing clean map to FITS file: J0326-3243_S_2002_01_31_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0601033 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000735959 
device "J0326-3243_S_2002_01_31_yyk\_map.eps/VPS"
! Attempting to open device: 'J0326-3243_S_2002_01_31_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.67347 3.67347 7.34694 14.6939 29.3878 58.7755
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0022 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.06 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.07 x 75.69 at 14.26 degrees (North through East)
! Clean map  min=-0.0094358  max=0.060103 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0326-3243_S_2002_01_31_yyk\_map.gif/gif"
! Attempting to open device: 'J0326-3243_S_2002_01_31_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0326-3243_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 22:07:13 2007