! Started logfile: J0258-3909_S_2002_05_14_yyk_uvs.log on Tue Jun 26 22:05:40 2007 obs J0258-3909_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0258-3909_S_2002_05_14_yyk_uva.fits ! AN table 1: 40 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.455 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0258-3909 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1153 lines of history. ! ! Reading 3276 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0258-3909_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.372377 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.865 mas, bmaj=25.36 mas, bpa=24.37 degrees ! Estimated noise=3911.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.227359 Jy ! Component: 100 - total flux cleaned = 0.264366 Jy ! Total flux subtracted in 100 components = 0.264366 Jy ! Clean residual min=-0.011869 max=0.020431 Jy/beam ! Clean residual mean=0.000064 rms=0.005079 Jy/beam ! Combined flux in latest and established models = 0.264366 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.264366 Jy ! ! Correcting IF 1. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.265455Jy sigma=0.001205 ! Fit after self-cal, rms=0.265224Jy sigma=0.001203 ! Inverting map and beam ! Estimated beam: bmin=2.865 mas, bmaj=25.36 mas, bpa=24.37 degrees ! Estimated noise=3911.87 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.665 mas, bmaj=28.41 mas, bpa=23.62 degrees ! Estimated noise=2465.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.013174 Jy ! Component: 100 - total flux cleaned = 0.0162525 Jy ! Component: 150 - total flux cleaned = 0.0186324 Jy ! Component: 200 - total flux cleaned = 0.0199599 Jy ! Total flux subtracted in 200 components = 0.0199599 Jy ! Clean residual min=-0.010941 max=0.015366 Jy/beam ! Clean residual mean=-0.000318 rms=0.004135 Jy/beam ! Combined flux in latest and established models = 0.284326 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 47 model components to the UV plane model. ! The established model now contains 63 components and 0.284326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264432Jy sigma=0.001199 ! Fit after self-cal, rms=0.264403Jy sigma=0.001199 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.665 x 28.41 at 23.62 degrees (North through East) ! Clean map min=-0.011003 max=0.2576 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.970678 ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.09 HN 1.00* KP 1.00* ! LA 1.00 NL 0.99 OV 0.88 PT 1.04 ! SC 1.08 MK 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00229 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.95 HN 1.00* KP 1.00* ! LA 0.88 NL 1.04 OV 0.98 PT 0.99 ! SC 1.06 MK 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.954022 ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.91 HN 1.00* KP 1.00* ! LA 0.98 NL 1.28 OV 1.09 PT 1.13 ! SC 0.95 MK 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01528 ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.93 HN 1.00* KP 1.00* ! LA 0.83 NL 1.18 OV 0.84 PT 0.98 ! SC 0.93 MK 1.00* ! ! ! Fit before self-cal, rms=0.264403Jy sigma=0.001199 ! Fit after self-cal, rms=0.271152Jy sigma=0.001186 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271152Jy sigma=0.001186 ! Fit after self-cal, rms=0.271158Jy sigma=0.001186 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.672 mas, bmaj=29.53 mas, bpa=23.65 degrees ! Estimated noise=2396.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0075897 Jy ! Component: 100 - total flux cleaned = -0.0100543 Jy ! Component: 150 - total flux cleaned = -0.0107034 Jy ! Component: 200 - total flux cleaned = -0.0112079 Jy ! Total flux subtracted in 200 components = -0.0112079 Jy ! Clean residual min=-0.007298 max=0.007076 Jy/beam ! Clean residual mean=-0.000208 rms=0.002249 Jy/beam ! Combined flux in latest and established models = 0.273118 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 91 components and 0.273118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271036Jy sigma=0.001185 ! Fit after self-cal, rms=0.271024Jy sigma=0.001185 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271024Jy sigma=0.001185 ! Fit after self-cal, rms=0.267281Jy sigma=0.001166 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112033 Jy ! Component: 100 - total flux cleaned = 0.000792912 Jy ! Component: 150 - total flux cleaned = 0.000654522 Jy ! Component: 200 - total flux cleaned = 0.000530375 Jy ! Total flux subtracted in 200 components = 0.000530375 Jy ! Clean residual min=-0.007587 max=0.007161 Jy/beam ! Clean residual mean=-0.000151 rms=0.002346 Jy/beam ! Combined flux in latest and established models = 0.273648 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 115 components and 0.273648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267231Jy sigma=0.001166 ! Fit after self-cal, rms=0.266911Jy sigma=0.001164 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.672 x 29.53 at 23.65 degrees (North through East) ! Clean map min=-0.0076629 max=0.25648 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266911Jy sigma=0.001164 ! Fit after self-cal, rms=0.267652Jy sigma=0.001162 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267652Jy sigma=0.001162 ! Fit after self-cal, rms=0.267610Jy sigma=0.001162 ! Inverting map and beam ! Estimated beam: bmin=3.683 mas, bmaj=29.54 mas, bpa=23.65 degrees ! Estimated noise=2391.91 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132919 Jy ! Component: 100 - total flux cleaned = -0.00162387 Jy ! Component: 150 - total flux cleaned = -0.00162377 Jy ! Component: 200 - total flux cleaned = -0.00156993 Jy ! Total flux subtracted in 200 components = -0.00156993 Jy ! Clean residual min=-0.008016 max=0.007314 Jy/beam ! Clean residual mean=-0.000167 rms=0.002269 Jy/beam ! Combined flux in latest and established models = 0.272078 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 129 components and 0.272078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267586Jy sigma=0.001162 ! Fit after self-cal, rms=0.267580Jy sigma=0.001162 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267580Jy sigma=0.001162 ! Fit after self-cal, rms=0.269524Jy sigma=0.001158 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269524Jy sigma=0.001158 ! Fit after self-cal, rms=0.269534Jy sigma=0.001158 ! Inverting map and beam ! Estimated beam: bmin=3.695 mas, bmaj=29.58 mas, bpa=23.65 degrees ! Estimated noise=2393.76 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118414 Jy ! Component: 100 - total flux cleaned = 6.28152e-05 Jy ! Component: 150 - total flux cleaned = 0.000121906 Jy ! Component: 200 - total flux cleaned = 0.00017523 Jy ! Total flux subtracted in 200 components = 0.00017523 Jy ! Clean residual min=-0.007867 max=0.007030 Jy/beam ! Clean residual mean=-0.000161 rms=0.002235 Jy/beam ! Combined flux in latest and established models = 0.272254 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 142 components and 0.272254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269507Jy sigma=0.001158 ! Fit after self-cal, rms=0.269514Jy sigma=0.001158 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.103 mas, bmaj=45.93 mas, bpa=11.45 degrees ! Estimated noise=2794.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000375976 Jy ! Component: 100 - total flux cleaned = -0.000314629 Jy ! Component: 150 - total flux cleaned = -0.000202077 Jy ! Component: 200 - total flux cleaned = -0.000199237 Jy ! Total flux subtracted in 200 components = -0.000199237 Jy ! Clean residual min=-0.009016 max=0.007280 Jy/beam ! Clean residual mean=-0.000243 rms=0.002833 Jy/beam ! Combined flux in latest and established models = 0.272054 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 158 components and 0.272054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269508Jy sigma=0.001158 ! Fit after self-cal, rms=0.269517Jy sigma=0.001158 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.873 mas, bmaj=25.99 mas, bpa=24.36 degrees ! Estimated noise=3892.32 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.228976 Jy ! Component: 100 - total flux cleaned = 0.263106 Jy ! Component: 150 - total flux cleaned = 0.272786 Jy ! Component: 200 - total flux cleaned = 0.2736 Jy ! Total flux subtracted in 200 components = 0.2736 Jy ! Clean residual min=-0.008080 max=0.007661 Jy/beam ! Clean residual mean=-0.000153 rms=0.002445 Jy/beam ! Combined flux in latest and established models = 0.2736 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.2736 Jy ! Inverting map and beam ! Estimated beam: bmin=3.695 mas, bmaj=29.58 mas, bpa=23.65 degrees ! Estimated noise=2393.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00138369 Jy ! Component: 100 - total flux cleaned = -0.000820439 Jy ! Component: 150 - total flux cleaned = -0.000621083 Jy ! Component: 200 - total flux cleaned = -0.000622674 Jy ! Total flux subtracted in 200 components = -0.000622674 Jy ! Clean residual min=-0.007901 max=0.007677 Jy/beam ! Clean residual mean=-0.000205 rms=0.002512 Jy/beam ! Combined flux in latest and established models = 0.272977 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 50 components and 0.272977 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.103 mas, bmaj=45.93 mas, bpa=11.45 degrees ! Estimated noise=2794.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000978878 Jy ! Component: 100 - total flux cleaned = -0.00124188 Jy ! Component: 150 - total flux cleaned = -0.00148799 Jy ! Component: 200 - total flux cleaned = -0.00164403 Jy ! Total flux subtracted in 200 components = -0.00164403 Jy ! Clean residual min=-0.009219 max=0.008286 Jy/beam ! Clean residual mean=-0.000262 rms=0.003121 Jy/beam ! Combined flux in latest and established models = 0.271333 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 66 components and 0.271333 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.695 mas, bmaj=29.58 mas, bpa=23.65 degrees ! Estimated noise=2393.76 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000100669 Jy ! Component: 100 - total flux cleaned = -2.74503e-05 Jy ! Component: 150 - total flux cleaned = -0.000154301 Jy ! Component: 200 - total flux cleaned = -0.000388821 Jy ! Total flux subtracted in 200 components = -0.000388821 Jy ! Clean residual min=-0.007762 max=0.007490 Jy/beam ! Clean residual mean=-0.000155 rms=0.002361 Jy/beam ! Combined flux in latest and established models = 0.270945 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 91 components and 0.270945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269547Jy sigma=0.001158 ! Fit after self-cal, rms=0.269549Jy sigma=0.001158 wmodel J0258-3909_S_2002_05_14_yyk\_map.mod ! Writing 91 model components to file: J0258-3909_S_2002_05_14_yyk_map.mod wobs J0258-3909_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0258-3909_S_2002_05_14_yyk_uvs.fits wwins J0258-3909_S_2002_05_14_yyk\_map.win ! wwins: Wrote 1 windows to J0258-3909_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000297017 Jy ! Component: 100 - total flux cleaned = -0.00101365 Jy ! Component: 150 - total flux cleaned = -0.00130071 Jy ! Component: 200 - total flux cleaned = -0.00112256 Jy ! Component: 250 - total flux cleaned = -0.000793643 Jy ! Component: 300 - total flux cleaned = -0.000553574 Jy ! Component: 350 - total flux cleaned = -0.000325669 Jy ! Component: 400 - total flux cleaned = -0.000180125 Jy ! Component: 450 - total flux cleaned = -0.00010894 Jy ! Component: 500 - total flux cleaned = 2.81037e-05 Jy ! Component: 550 - total flux cleaned = 0.000158916 Jy ! Component: 600 - total flux cleaned = 0.000347837 Jy ! Component: 650 - total flux cleaned = 0.000408644 Jy ! Component: 700 - total flux cleaned = 0.000589029 Jy ! Component: 750 - total flux cleaned = 0.000705995 Jy ! Component: 800 - total flux cleaned = 0.000706487 Jy ! Component: 850 - total flux cleaned = 0.000706467 Jy ! Component: 900 - total flux cleaned = 0.00070641 Jy ! Component: 950 - total flux cleaned = 0.000811147 Jy ! Component: 1000 - total flux cleaned = 0.000862513 Jy ! Component: 1050 - total flux cleaned = 0.000962573 Jy ! Component: 1100 - total flux cleaned = 0.00110847 Jy ! Component: 1150 - total flux cleaned = 0.00125126 Jy ! Component: 1200 - total flux cleaned = 0.00153306 Jy ! Component: 1250 - total flux cleaned = 0.00195097 Jy ! Component: 1300 - total flux cleaned = 0.00227195 Jy ! Component: 1350 - total flux cleaned = 0.00267885 Jy ! Component: 1400 - total flux cleaned = 0.00321356 Jy ! Component: 1450 - total flux cleaned = 0.00361004 Jy ! Component: 1500 - total flux cleaned = 0.00396085 Jy ! Component: 1550 - total flux cleaned = 0.00431129 Jy ! Component: 1600 - total flux cleaned = 0.00457393 Jy ! Component: 1650 - total flux cleaned = 0.00483669 Jy ! Component: 1700 - total flux cleaned = 0.00514271 Jy ! Component: 1750 - total flux cleaned = 0.00536241 Jy ! Component: 1800 - total flux cleaned = 0.00562609 Jy ! Component: 1850 - total flux cleaned = 0.00575877 Jy ! Component: 1900 - total flux cleaned = 0.00598087 Jy ! Component: 1950 - total flux cleaned = 0.00607045 Jy ! Component: 2000 - total flux cleaned = 0.0061604 Jy ! Total flux subtracted in 2048 components = 0.00629612 Jy ! Clean residual min=-0.002735 max=0.002976 Jy/beam ! Clean residual mean=-0.000140 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.277241 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 216 components and 0.277241 Jy ![Exited script file: muppet] wmap "J0258-3909_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.695 x 29.58 at 23.65 degrees (North through East) ! Clean map min=-0.0055205 max=0.2617 Jy/beam ! Writing clean map to FITS file: J0258-3909_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.261696 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00105722 device "J0258-3909_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0258-3909_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.21196 1.21196 2.42392 4.84783 9.69567 19.3913 38.7827 77.5653 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0031 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.261 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.695 x 29.58 at 23.65 degrees (North through East) ! Clean map min=-0.0055205 max=0.2617 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0258-3909_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0258-3909_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0258-3909_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:05:48 2007