! Started logfile: J0256-3315_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:46:41 2007 obs J0256-3315_X_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0256-3315_X_2002_01_31_yyk_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.741228 visibilities/baseline/integration-bin. ! Found source: J0256-3315 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 10140 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 flag NL ! Flagging baselines of antenna 1:NL in the currently selected channels. ![@muppet J0256-3315_X_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.267517 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6251 mas, bmaj=1.68 mas, bpa=4.923 degrees ! Estimated noise=1708.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.179421 Jy ! Component: 100 - total flux cleaned = 0.212555 Jy ! Total flux subtracted in 100 components = 0.212555 Jy ! Clean residual min=-0.011253 max=0.014683 Jy/beam ! Clean residual mean=0.000030 rms=0.002960 Jy/beam ! Combined flux in latest and established models = 0.212555 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.212555 Jy ! ! Correcting IF 1. ! A total of 181 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 181 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 181 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 181 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.161358Jy sigma=0.001225 ! Fit after self-cal, rms=0.161213Jy sigma=0.001224 ! Inverting map and beam ! Estimated beam: bmin=0.6251 mas, bmaj=1.68 mas, bpa=4.923 degrees ! Estimated noise=1708.89 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8836 mas, bmaj=2.218 mas, bpa=3.239 degrees ! Estimated noise=977.691 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142529 Jy ! Component: 100 - total flux cleaned = 0.0179952 Jy ! Component: 150 - total flux cleaned = 0.0180804 Jy ! Component: 200 - total flux cleaned = 0.0180772 Jy ! Total flux subtracted in 200 components = 0.0180772 Jy ! Clean residual min=-0.009719 max=0.007343 Jy/beam ! Clean residual mean=0.000110 rms=0.002583 Jy/beam ! Combined flux in latest and established models = 0.230632 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 18 components and 0.230632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160364Jy sigma=0.001217 ! Fit after self-cal, rms=0.160348Jy sigma=0.001217 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8836 x 2.218 at 3.239 degrees (North through East) ! Clean map min=-0.0091823 max=0.21278 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01139 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.90 HN 1.00* KP 1.05 ! LA 1.10 MK 0.99 NL 1.00* OV 0.96 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01708 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.90 HN 1.00* KP 0.98 ! LA 1.11 MK 0.97 NL 1.00* OV 0.92 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.987388 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.88 HN 1.00* KP 0.99 ! LA 1.13 MK 1.01 NL 1.00* OV 0.98 ! PT 1.08 SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.97982 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.87 HN 1.00* KP 1.03 ! LA 1.13 MK 1.05 NL 1.00* OV 0.97 ! PT 1.14 SC 0.99 ! ! ! Fit before self-cal, rms=0.160348Jy sigma=0.001217 ! Fit after self-cal, rms=0.158623Jy sigma=0.001205 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158623Jy sigma=0.001205 ! Fit after self-cal, rms=0.158621Jy sigma=0.001205 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8838 mas, bmaj=2.225 mas, bpa=3.412 degrees ! Estimated noise=974.163 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000945683 Jy ! Component: 100 - total flux cleaned = 0.0010316 Jy ! Component: 150 - total flux cleaned = 0.00106583 Jy ! Component: 200 - total flux cleaned = 0.00106338 Jy ! Total flux subtracted in 200 components = 0.00106338 Jy ! Clean residual min=-0.004561 max=0.005444 Jy/beam ! Clean residual mean=-0.000003 rms=0.001223 Jy/beam ! Combined flux in latest and established models = 0.231695 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.231695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158603Jy sigma=0.001205 ! Fit after self-cal, rms=0.158594Jy sigma=0.001205 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158594Jy sigma=0.001205 ! Fit after self-cal, rms=0.156496Jy sigma=0.001188 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00052658 Jy ! Component: 100 - total flux cleaned = 0.000580329 Jy ! Component: 150 - total flux cleaned = 0.000576221 Jy ! Component: 200 - total flux cleaned = 0.000536467 Jy ! Total flux subtracted in 200 components = 0.000536467 Jy ! Clean residual min=-0.004683 max=0.005084 Jy/beam ! Clean residual mean=-0.000004 rms=0.001214 Jy/beam ! Combined flux in latest and established models = 0.232232 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.232232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156479Jy sigma=0.001188 ! Fit after self-cal, rms=0.156121Jy sigma=0.001185 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8838 x 2.225 at 3.412 degrees (North through East) ! Clean map min=-0.004348 max=0.2147 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156121Jy sigma=0.001185 ! Fit after self-cal, rms=0.157169Jy sigma=0.001182 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157169Jy sigma=0.001182 ! Fit after self-cal, rms=0.157099Jy sigma=0.001182 ! Inverting map and beam ! Estimated beam: bmin=0.8758 mas, bmaj=2.245 mas, bpa=3.454 degrees ! Estimated noise=970.567 mJy/beam. ! Added new window around map position (-3.4, -1.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274602 Jy ! Component: 100 - total flux cleaned = 0.00308843 Jy ! Component: 150 - total flux cleaned = 0.00301487 Jy ! Component: 200 - total flux cleaned = 0.00294727 Jy ! Total flux subtracted in 200 components = 0.00294727 Jy ! Clean residual min=-0.003302 max=0.003681 Jy/beam ! Clean residual mean=0.000003 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.235179 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 52 components and 0.235179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156917Jy sigma=0.001181 ! Fit after self-cal, rms=0.156897Jy sigma=0.001180 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156897Jy sigma=0.001180 ! Fit after self-cal, rms=0.157519Jy sigma=0.001177 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157519Jy sigma=0.001177 ! Fit after self-cal, rms=0.157516Jy sigma=0.001177 ! Inverting map and beam ! Estimated beam: bmin=0.8763 mas, bmaj=2.245 mas, bpa=3.415 degrees ! Estimated noise=972.867 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118218 Jy ! Component: 100 - total flux cleaned = 0.0013636 Jy ! Component: 150 - total flux cleaned = 0.0013625 Jy ! Component: 200 - total flux cleaned = 0.0013143 Jy ! Total flux subtracted in 200 components = 0.0013143 Jy ! Clean residual min=-0.003097 max=0.003654 Jy/beam ! Clean residual mean=0.000001 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.236493 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 60 components and 0.236493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157474Jy sigma=0.001177 ! Fit after self-cal, rms=0.157470Jy sigma=0.001177 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.943 mas, bmaj=9.001 mas, bpa=11.48 degrees ! Estimated noise=1222.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.46413e-05 Jy ! Component: 100 - total flux cleaned = 1.82793e-05 Jy ! Component: 150 - total flux cleaned = -3.68703e-05 Jy ! Component: 200 - total flux cleaned = -8.65131e-05 Jy ! Total flux subtracted in 200 components = -8.65131e-05 Jy ! Clean residual min=-0.002615 max=0.004329 Jy/beam ! Clean residual mean=0.000000 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 0.236407 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 75 components and 0.236407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157465Jy sigma=0.001177 ! Fit after self-cal, rms=0.157464Jy sigma=0.001177 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6232 mas, bmaj=1.692 mas, bpa=5.154 degrees ! Estimated noise=1686.7 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.178887 Jy ! Component: 100 - total flux cleaned = 0.21196 Jy ! Component: 150 - total flux cleaned = 0.22616 Jy ! Component: 200 - total flux cleaned = 0.231328 Jy ! Total flux subtracted in 200 components = 0.231328 Jy ! Clean residual min=-0.007039 max=0.006430 Jy/beam ! Clean residual mean=-0.000004 rms=0.001808 Jy/beam ! Combined flux in latest and established models = 0.231328 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.231328 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8763 mas, bmaj=2.245 mas, bpa=3.415 degrees ! Estimated noise=972.867 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -3). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00498554 Jy ! Component: 100 - total flux cleaned = 0.00497429 Jy ! Component: 150 - total flux cleaned = 0.00497764 Jy ! Component: 200 - total flux cleaned = 0.00482365 Jy ! Total flux subtracted in 200 components = 0.00482365 Jy ! Clean residual min=-0.003313 max=0.003652 Jy/beam ! Clean residual mean=0.000002 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.236152 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 41 components and 0.236152 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.943 mas, bmaj=9.001 mas, bpa=11.48 degrees ! Estimated noise=1222.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000349222 Jy ! Component: 100 - total flux cleaned = 0.000347145 Jy ! Component: 150 - total flux cleaned = 0.000349944 Jy ! Component: 200 - total flux cleaned = 0.000258017 Jy ! Total flux subtracted in 200 components = 0.000258017 Jy ! Clean residual min=-0.002748 max=0.004311 Jy/beam ! Clean residual mean=0.000002 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.23641 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 54 components and 0.23641 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8763 mas, bmaj=2.245 mas, bpa=3.415 degrees ! Estimated noise=972.867 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000289046 Jy ! Component: 100 - total flux cleaned = -0.000520515 Jy ! Component: 150 - total flux cleaned = -0.00052013 Jy ! Component: 200 - total flux cleaned = -0.00056091 Jy ! Total flux subtracted in 200 components = -0.00056091 Jy ! Clean residual min=-0.003076 max=0.003570 Jy/beam ! Clean residual mean=0.000001 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.235849 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 70 components and 0.235849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157419Jy sigma=0.001177 ! Fit after self-cal, rms=0.157408Jy sigma=0.001176 wmodel J0256-3315_X_2002_01_31_yyk\_map.mod ! Writing 70 model components to file: J0256-3315_X_2002_01_31_yyk_map.mod wobs J0256-3315_X_2002_01_31_yyk\_uvs.fits ! Applying 76 buffered edits. ! Writing UV FITS file: J0256-3315_X_2002_01_31_yyk_uvs.fits wwins J0256-3315_X_2002_01_31_yyk\_map.win ! wwins: Wrote 3 windows to J0256-3315_X_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000740091 Jy ! Component: 100 - total flux cleaned = 0.00112034 Jy ! Component: 150 - total flux cleaned = 0.0016241 Jy ! Component: 200 - total flux cleaned = 0.00214982 Jy ! Component: 250 - total flux cleaned = 0.00260432 Jy ! Component: 300 - total flux cleaned = 0.00290801 Jy ! Component: 350 - total flux cleaned = 0.00315916 Jy ! Component: 400 - total flux cleaned = 0.00340291 Jy ! Component: 450 - total flux cleaned = 0.00379518 Jy ! Component: 500 - total flux cleaned = 0.00409997 Jy ! Component: 550 - total flux cleaned = 0.00432229 Jy ! Component: 600 - total flux cleaned = 0.00464601 Jy ! Component: 650 - total flux cleaned = 0.00475064 Jy ! Component: 700 - total flux cleaned = 0.00481802 Jy ! Component: 750 - total flux cleaned = 0.00488431 Jy ! Component: 800 - total flux cleaned = 0.00488474 Jy ! Component: 850 - total flux cleaned = 0.00494838 Jy ! Component: 900 - total flux cleaned = 0.00488648 Jy ! Component: 950 - total flux cleaned = 0.00494785 Jy ! Component: 1000 - total flux cleaned = 0.00488952 Jy ! Component: 1050 - total flux cleaned = 0.00500741 Jy ! Component: 1100 - total flux cleaned = 0.00495031 Jy ! Component: 1150 - total flux cleaned = 0.00497912 Jy ! Component: 1200 - total flux cleaned = 0.00492411 Jy ! Component: 1250 - total flux cleaned = 0.0050058 Jy ! Component: 1300 - total flux cleaned = 0.00500566 Jy ! Component: 1350 - total flux cleaned = 0.00508477 Jy ! Component: 1400 - total flux cleaned = 0.00505876 Jy ! Component: 1450 - total flux cleaned = 0.00511057 Jy ! Component: 1500 - total flux cleaned = 0.00513618 Jy ! Component: 1550 - total flux cleaned = 0.00516118 Jy ! Component: 1600 - total flux cleaned = 0.00518604 Jy ! Component: 1650 - total flux cleaned = 0.00518628 Jy ! Component: 1700 - total flux cleaned = 0.00523386 Jy ! Component: 1750 - total flux cleaned = 0.00523349 Jy ! Component: 1800 - total flux cleaned = 0.00514068 Jy ! Component: 1850 - total flux cleaned = 0.00511796 Jy ! Component: 1900 - total flux cleaned = 0.00509546 Jy ! Component: 1950 - total flux cleaned = 0.00500708 Jy ! Component: 2000 - total flux cleaned = 0.00505127 Jy ! Total flux subtracted in 2048 components = 0.00507288 Jy ! Clean residual min=-0.001182 max=0.001232 Jy/beam ! Clean residual mean=-0.000007 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.240922 Jy keep ! Adding 111 model components to the UV plane model. ! The established model now contains 181 components and 0.240922 Jy ![Exited script file: muppet] wmap "J0256-3315_X_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8763 x 2.245 at 3.415 degrees (North through East) ! Clean map min=-0.0040037 max=0.21287 Jy/beam ! Writing clean map to FITS file: J0256-3315_X_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.212869 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000391468 device "J0256-3315_X_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0256-3315_X_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.551702 0.551702 1.1034 2.20681 4.41362 8.82724 17.6545 35.309 70.6179 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.212 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8763 x 2.245 at 3.415 degrees (North through East) ! Clean map min=-0.0040037 max=0.21287 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0256-3315_X_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0256-3315_X_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0256-3315_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:46:48 2007