! Started logfile: J0240-2309_S_2002_05_14_yyk_uvs.log on Tue Jun 26 22:04:24 2007
obs J0240-2309_S_2002_05_14_yyk_uva.fits
! Reading UV FITS file: J0240-2309_S_2002_05_14_yyk_uva.fits
! AN table 1: 80 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.509167 visibilities/baseline/integration-bin.
! Found source: J0240-2309
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22947e+09        8e+06          1        8e+06
!  02        2  2.25947e+09        8e+06          1        8e+06
!  03        3  2.34947e+09        8e+06          1        8e+06
!  04        4  2.36947e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1153 lines of history.
! 
! Reading 7332 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0240-2309_S_2002_05_14_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 3.45237 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.027 mas, bmaj=12.78 mas, bpa=24.65 degrees
! Estimated noise=2377.13 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 2.65795 Jy
! Component: 100  -  total flux cleaned = 3.39869 Jy
! Total flux subtracted in 100 components = 3.39869 Jy
! Clean residual min=-0.185433 max=0.328137 Jy/beam
! Clean residual mean=0.007182 rms=0.070469 Jy/beam
! Combined flux in latest and established models = 3.39869 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 3.39869 Jy
! 
! Correcting IF 1.
!  A total of 230 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 230 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 234 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 230 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.980967Jy  sigma=0.006051
! Fit after  self-cal, rms=0.957599Jy  sigma=0.005932
! Inverting map and beam 
! Estimated beam: bmin=3.027 mas, bmaj=12.78 mas, bpa=24.65 degrees
! Estimated noise=2378.76 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.763 mas, bmaj=14.63 mas, bpa=22.15 degrees
! Estimated noise=1331.83 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.632926 Jy
! Component: 100  -  total flux cleaned = 0.937402 Jy
! Component: 150  -  total flux cleaned = 1.09943 Jy
! Component: 200  -  total flux cleaned = 1.15421 Jy
! Total flux subtracted in 200 components = 1.15421 Jy
! Clean residual min=-0.101247 max=0.180379 Jy/beam
! Clean residual mean=0.002472 rms=0.031976 Jy/beam
! Combined flux in latest and established models = 4.5529 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 57 model components to the UV plane model.
! The established model now contains 78 components and 4.5529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.685895Jy  sigma=0.003760
! Fit after  self-cal, rms=0.681119Jy  sigma=0.003738
! Inverting map 
! Added new window around map position (-8.5, -8).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.150335 Jy
! Component: 100  -  total flux cleaned = 0.151061 Jy
! Component: 150  -  total flux cleaned = 0.132729 Jy
! Component: 200  -  total flux cleaned = 0.119707 Jy
! Total flux subtracted in 200 components = 0.119707 Jy
! Clean residual min=-0.066603 max=0.069909 Jy/beam
! Clean residual mean=0.001021 rms=0.022261 Jy/beam
! Combined flux in latest and established models = 4.6726 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 38 model components to the UV plane model.
! The established model now contains 115 components and 4.6726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.622538Jy  sigma=0.003436
! Fit after  self-cal, rms=0.620639Jy  sigma=0.003423
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.763 x 14.63 at 22.15 degrees (North through East)
! Clean map  min=-0.066101  max=3.3557 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00718
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.12     HN        1.02     KP        1.00*    
!   LA        0.96     NL        0.89     OV        0.99     PT        1.02     
!   SC        1.04     MK        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00084
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.02     HN        1.08     KP        1.00*    
!   LA        0.96     NL        0.99     OV        1.02     PT        0.98     
!   SC        1.01     MK        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.956275
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        1.15     KP        1.00*    
!   LA        1.01     NL        1.09     OV        1.09     PT        1.15     
!   SC        0.96     MK        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.01456
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.90     HN        1.10     KP        1.00*    
!   LA        0.84     NL        1.07     OV        0.95     PT        0.99     
!   SC        0.98     MK        1.00*    
! 
! 
! Fit before self-cal, rms=0.620639Jy  sigma=0.003423
! Fit after  self-cal, rms=0.510640Jy  sigma=0.002692
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.510640Jy  sigma=0.002692
! Fit after  self-cal, rms=0.510610Jy  sigma=0.002692
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.769 mas, bmaj=15.05 mas, bpa=22.67 degrees
! Estimated noise=1324.26 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.019185 Jy
! Component: 100  -  total flux cleaned = -0.0271706 Jy
! Component: 150  -  total flux cleaned = -0.0258796 Jy
! Component: 200  -  total flux cleaned = -0.027234 Jy
! Total flux subtracted in 200 components = -0.027234 Jy
! Clean residual min=-0.044726 max=0.040858 Jy/beam
! Clean residual mean=0.000074 rms=0.012268 Jy/beam
! Combined flux in latest and established models = 4.64537 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 142 components and 4.64537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.495200Jy  sigma=0.002624
! Fit after  self-cal, rms=0.494924Jy  sigma=0.002622
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.494924Jy  sigma=0.002622
! Fit after  self-cal, rms=0.438956Jy  sigma=0.002190
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00723078 Jy
! Component: 100  -  total flux cleaned = 0.00422367 Jy
! Component: 150  -  total flux cleaned = 0.0041948 Jy
! Component: 200  -  total flux cleaned = 0.00493253 Jy
! Total flux subtracted in 200 components = 0.00493253 Jy
! Clean residual min=-0.042181 max=0.039557 Jy/beam
! Clean residual mean=0.000127 rms=0.011753 Jy/beam
! Combined flux in latest and established models = 4.6503 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 38 model components to the UV plane model.
! The established model now contains 160 components and 4.6503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.434338Jy  sigma=0.002168
! Fit after  self-cal, rms=0.428822Jy  sigma=0.002127
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.769 x 15.05 at 22.67 degrees (North through East)
! Clean map  min=-0.055825  max=3.3557 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.428822Jy  sigma=0.002127
! Fit after  self-cal, rms=0.296524Jy  sigma=0.001554
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.296524Jy  sigma=0.001554
! Fit after  self-cal, rms=0.294917Jy  sigma=0.001545
! Inverting map and beam 
! Estimated beam: bmin=3.769 mas, bmaj=14.85 mas, bpa=22.39 degrees
! Estimated noise=1320.47 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0293595 Jy
! Component: 100  -  total flux cleaned = 0.0362602 Jy
! Component: 150  -  total flux cleaned = 0.0403438 Jy
! Component: 200  -  total flux cleaned = 0.0420754 Jy
! Total flux subtracted in 200 components = 0.0420754 Jy
! Clean residual min=-0.012623 max=0.014648 Jy/beam
! Clean residual mean=-0.000001 rms=0.003980 Jy/beam
! Combined flux in latest and established models = 4.69238 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 193 components and 4.69238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.291167Jy  sigma=0.001520
! Fit after  self-cal, rms=0.290575Jy  sigma=0.001517
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.290575Jy  sigma=0.001517
! Fit after  self-cal, rms=0.288781Jy  sigma=0.001506
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.288781Jy  sigma=0.001506
! Fit after  self-cal, rms=0.288621Jy  sigma=0.001506
! Inverting map and beam 
! Estimated beam: bmin=3.77 mas, bmaj=14.82 mas, bpa=22.36 degrees
! Estimated noise=1318.97 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.011165 Jy
! Component: 100  -  total flux cleaned = 0.0126082 Jy
! Component: 150  -  total flux cleaned = 0.0147414 Jy
! Component: 200  -  total flux cleaned = 0.0159171 Jy
! Total flux subtracted in 200 components = 0.0159171 Jy
! Clean residual min=-0.011337 max=0.011770 Jy/beam
! Clean residual mean=-0.000017 rms=0.003337 Jy/beam
! Combined flux in latest and established models = 4.7083 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 38 model components to the UV plane model.
! The established model now contains 215 components and 4.7083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.287213Jy  sigma=0.001498
! Fit after  self-cal, rms=0.287120Jy  sigma=0.001497
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.423 mas, bmaj=20.24 mas, bpa=12.44 degrees
! Estimated noise=1557.93 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00175949 Jy
! Component: 100  -  total flux cleaned = 0.0031848 Jy
! Component: 150  -  total flux cleaned = 0.00478382 Jy
! Component: 200  -  total flux cleaned = 0.00583668 Jy
! Total flux subtracted in 200 components = 0.00583668 Jy
! Clean residual min=-0.011502 max=0.009353 Jy/beam
! Clean residual mean=-0.000078 rms=0.003432 Jy/beam
! Combined flux in latest and established models = 4.71413 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 244 components and 4.71413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.286924Jy  sigma=0.001495
! Fit after  self-cal, rms=0.286886Jy  sigma=0.001495
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.014 mas, bmaj=12.9 mas, bpa=24.76 degrees
! Estimated noise=2401.81 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 2.69571 Jy
! Component: 100  -  total flux cleaned = 3.46256 Jy
! Component: 150  -  total flux cleaned = 3.89313 Jy
! Component: 200  -  total flux cleaned = 4.1644 Jy
! Total flux subtracted in 200 components = 4.1644 Jy
! Clean residual min=-0.059075 max=0.108349 Jy/beam
! Clean residual mean=0.002694 rms=0.024697 Jy/beam
! Combined flux in latest and established models = 4.1644 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 49 model components to the UV plane model.
! The established model now contains 49 components and 4.1644 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.77 mas, bmaj=14.82 mas, bpa=22.36 degrees
! Estimated noise=1318.97 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.255752 Jy
! Component: 100  -  total flux cleaned = 0.390691 Jy
! Component: 150  -  total flux cleaned = 0.466886 Jy
! Component: 200  -  total flux cleaned = 0.50806 Jy
! Total flux subtracted in 200 components = 0.50806 Jy
! Clean residual min=-0.017852 max=0.020693 Jy/beam
! Clean residual mean=0.000589 rms=0.006597 Jy/beam
! Combined flux in latest and established models = 4.67246 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 111 components and 4.67246 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.423 mas, bmaj=20.24 mas, bpa=12.44 degrees
! Estimated noise=1557.93 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0295274 Jy
! Component: 100  -  total flux cleaned = 0.0358094 Jy
! Component: 150  -  total flux cleaned = 0.037979 Jy
! Component: 200  -  total flux cleaned = 0.0403318 Jy
! Total flux subtracted in 200 components = 0.0403318 Jy
! Clean residual min=-0.014316 max=0.013414 Jy/beam
! Clean residual mean=0.000116 rms=0.004557 Jy/beam
! Combined flux in latest and established models = 4.71279 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 161 components and 4.71279 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.77 mas, bmaj=14.82 mas, bpa=22.36 degrees
! Estimated noise=1318.97 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00636869 Jy
! Component: 100  -  total flux cleaned = -0.00696111 Jy
! Component: 150  -  total flux cleaned = -0.00608751 Jy
! Component: 200  -  total flux cleaned = -0.00534558 Jy
! Total flux subtracted in 200 components = -0.00534558 Jy
! Clean residual min=-0.010302 max=0.011036 Jy/beam
! Clean residual mean=0.000030 rms=0.003082 Jy/beam
! Combined flux in latest and established models = 4.70745 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 192 components and 4.70745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.285214Jy  sigma=0.001490
! Fit after  self-cal, rms=0.284896Jy  sigma=0.001488
wmodel J0240-2309_S_2002_05_14_yyk\_map.mod
! Writing 192 model components to file: J0240-2309_S_2002_05_14_yyk_map.mod
wobs J0240-2309_S_2002_05_14_yyk\_uvs.fits
! Writing UV FITS file: J0240-2309_S_2002_05_14_yyk_uvs.fits
wwins J0240-2309_S_2002_05_14_yyk\_map.win
! wwins: Wrote 2 windows to J0240-2309_S_2002_05_14_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00375769 Jy
! Component: 100  -  total flux cleaned = 0.00392144 Jy
! Component: 150  -  total flux cleaned = 0.00392472 Jy
! Component: 200  -  total flux cleaned = 0.0040607 Jy
! Component: 250  -  total flux cleaned = 0.00368956 Jy
! Component: 300  -  total flux cleaned = 0.00333818 Jy
! Component: 350  -  total flux cleaned = 0.00356377 Jy
! Component: 400  -  total flux cleaned = 0.00323513 Jy
! Component: 450  -  total flux cleaned = 0.00228838 Jy
! Component: 500  -  total flux cleaned = 0.00178003 Jy
! Component: 550  -  total flux cleaned = 0.00128203 Jy
! Component: 600  -  total flux cleaned = 0.000993755 Jy
! Component: 650  -  total flux cleaned = 0.000803842 Jy
! Component: 700  -  total flux cleaned = 0.000804314 Jy
! Component: 750  -  total flux cleaned = 0.000802627 Jy
! Component: 800  -  total flux cleaned = 0.00097735 Jy
! Component: 850  -  total flux cleaned = 0.000891148 Jy
! Component: 900  -  total flux cleaned = 0.00138805 Jy
! Component: 950  -  total flux cleaned = 0.00146342 Jy
! Component: 1000  -  total flux cleaned = 0.00130423 Jy
! Component: 1050  -  total flux cleaned = 0.00177227 Jy
! Component: 1100  -  total flux cleaned = 0.00207733 Jy
! Component: 1150  -  total flux cleaned = 0.00222812 Jy
! Component: 1200  -  total flux cleaned = 0.0023023 Jy
! Component: 1250  -  total flux cleaned = 0.00237413 Jy
! Component: 1300  -  total flux cleaned = 0.00244468 Jy
! Component: 1350  -  total flux cleaned = 0.00251499 Jy
! Component: 1400  -  total flux cleaned = 0.00278631 Jy
! Component: 1450  -  total flux cleaned = 0.00285145 Jy
! Component: 1500  -  total flux cleaned = 0.00298293 Jy
! Component: 1550  -  total flux cleaned = 0.00330522 Jy
! Component: 1600  -  total flux cleaned = 0.00368239 Jy
! Component: 1650  -  total flux cleaned = 0.00405292 Jy
! Component: 1700  -  total flux cleaned = 0.00447483 Jy
! Component: 1750  -  total flux cleaned = 0.00483248 Jy
! Component: 1800  -  total flux cleaned = 0.00524119 Jy
! Component: 1850  -  total flux cleaned = 0.00570211 Jy
! Component: 1900  -  total flux cleaned = 0.00609762 Jy
! Component: 1950  -  total flux cleaned = 0.00626465 Jy
! Component: 2000  -  total flux cleaned = 0.00648548 Jy
! Total flux subtracted in 2048 components = 0.00675706 Jy
! Clean residual min=-0.003440 max=0.003119 Jy/beam
! Clean residual mean=0.000020 rms=0.001180 Jy/beam
! Combined flux in latest and established models = 4.7142 Jy
keep
! Adding 122 model components to the UV plane model.
! The established model now contains 314 components and 4.7142 Jy
![Exited script file: muppet]
wmap "J0240-2309_S_2002_05_14_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.77 x 14.82 at 22.36 degrees (North through East)
! Clean map  min=-0.013254  max=3.3471 Jy/beam
! Writing clean map to FITS file: J0240-2309_S_2002_05_14_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 3.34707 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00117242 
device "J0240-2309_S_2002_05_14_yyk\_map.eps/VPS"
! Attempting to open device: 'J0240-2309_S_2002_05_14_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.105084 0.105084 0.210169 0.420338 0.840675 1.68135 3.3627 6.7254 13.4508 26.9016 53.8032
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0035 
print "peak=",int(peak_flux*1000)/1000
! peak= 3.347 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.77 x 14.82 at 22.36 degrees (North through East)
! Clean map  min=-0.013254  max=3.3471 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0240-2309_S_2002_05_14_yyk\_map.gif/gif"
! Attempting to open device: 'J0240-2309_S_2002_05_14_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0240-2309_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:04:32 2007