! Started logfile: J0231-3935_S_2002_05_14_yyk_uvs.log on Tue Jun 26 22:03:09 2007 obs J0231-3935_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0231-3935_S_2002_05_14_yyk_uva.fits ! AN table 1: 2 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.133333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0231-3935 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1153 lines of history. ! ! Reading 48 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0231-3935_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.518591 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.819 mas, bmaj=71.68 mas, bpa=0.3487 degrees ! Estimated noise=32109.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.302164 Jy ! Component: 100 - total flux cleaned = 0.358562 Jy ! Total flux subtracted in 100 components = 0.358562 Jy ! Clean residual min=-0.046524 max=0.048392 Jy/beam ! Clean residual mean=-0.000793 rms=0.023858 Jy/beam ! Combined flux in latest and established models = 0.358562 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.358562 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.178832Jy sigma=0.000942 ! Fit after self-cal, rms=0.177128Jy sigma=0.000936 ! Inverting map and beam ! Estimated beam: bmin=6.819 mas, bmaj=71.68 mas, bpa=0.3487 degrees ! Estimated noise=32109.1 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.739 mas, bmaj=71.34 mas, bpa=1.898 degrees ! Estimated noise=27759.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0536604 Jy ! Component: 100 - total flux cleaned = -0.0707542 Jy ! Component: 150 - total flux cleaned = -0.066539 Jy ! Component: 200 - total flux cleaned = -0.0665428 Jy ! Total flux subtracted in 200 components = -0.0665428 Jy ! Clean residual min=-0.039410 max=0.041499 Jy/beam ! Clean residual mean=-0.000069 rms=0.010451 Jy/beam ! Combined flux in latest and established models = 0.29202 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 71 model components to the UV plane model. ! The established model now contains 95 components and 0.29202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156847Jy sigma=0.000804 ! Fit after self-cal, rms=0.154870Jy sigma=0.000794 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.739 x 71.34 at 1.898 degrees (North through East) ! Clean map min=-0.068387 max=0.34103 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* MK 0.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.991315 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00* KP 1.00* ! LA 0.94 NL 1.06 OV 1.02 PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.0033 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 1.00* ! LA 1.10 NL 0.93 OV 1.01 PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* MK 0.00* ! ! ! Fit before self-cal, rms=0.154870Jy sigma=0.000794 ! Fit after self-cal, rms=0.153182Jy sigma=0.000773 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153182Jy sigma=0.000773 ! Fit after self-cal, rms=0.153212Jy sigma=0.000773 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.744 mas, bmaj=70.62 mas, bpa=1.803 degrees ! Estimated noise=27745.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156475 Jy ! Component: 100 - total flux cleaned = 0.0141266 Jy ! Component: 150 - total flux cleaned = 0.0134941 Jy ! Component: 200 - total flux cleaned = 0.0136546 Jy ! Total flux subtracted in 200 components = 0.0136546 Jy ! Clean residual min=-0.021410 max=0.020370 Jy/beam ! Clean residual mean=0.000227 rms=0.006629 Jy/beam ! Combined flux in latest and established models = 0.305674 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 129 components and 0.305674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148380Jy sigma=0.000747 ! Fit after self-cal, rms=0.148595Jy sigma=0.000750 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148595Jy sigma=0.000750 ! Fit after self-cal, rms=0.148595Jy sigma=0.000750 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00870151 Jy ! Component: 100 - total flux cleaned = -0.0151266 Jy ! Component: 150 - total flux cleaned = -0.0149551 Jy ! Component: 200 - total flux cleaned = -0.0147859 Jy ! Total flux subtracted in 200 components = -0.0147859 Jy ! Clean residual min=-0.022604 max=0.021506 Jy/beam ! Clean residual mean=-0.000212 rms=0.007121 Jy/beam ! Combined flux in latest and established models = 0.290888 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 172 components and 0.290888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147501Jy sigma=0.000743 ! Fit after self-cal, rms=0.147080Jy sigma=0.000742 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.744 x 70.62 at 1.803 degrees (North through East) ! Clean map min=-0.066289 max=0.34236 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147080Jy sigma=0.000742 ! Fit after self-cal, rms=0.144508Jy sigma=0.000735 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144508Jy sigma=0.000735 ! Fit after self-cal, rms=0.144508Jy sigma=0.000735 ! Inverting map and beam ! Estimated beam: bmin=7.836 mas, bmaj=71.33 mas, bpa=1.81 degrees ! Estimated noise=27834 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131116 Jy ! Component: 100 - total flux cleaned = 0.0142835 Jy ! Component: 150 - total flux cleaned = 0.0133546 Jy ! Component: 200 - total flux cleaned = 0.012372 Jy ! Total flux subtracted in 200 components = 0.012372 Jy ! Clean residual min=-0.006131 max=0.006326 Jy/beam ! Clean residual mean=-0.000032 rms=0.002234 Jy/beam ! Combined flux in latest and established models = 0.30326 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 70 model components to the UV plane model. ! The established model now contains 239 components and 0.303261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141999Jy sigma=0.000725 ! Fit after self-cal, rms=0.141811Jy sigma=0.000724 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141811Jy sigma=0.000724 ! Fit after self-cal, rms=0.140718Jy sigma=0.000721 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140718Jy sigma=0.000721 ! Fit after self-cal, rms=0.140718Jy sigma=0.000721 ! Inverting map and beam ! Estimated beam: bmin=7.777 mas, bmaj=71.68 mas, bpa=1.856 degrees ! Estimated noise=27740.2 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00389228 Jy ! Component: 100 - total flux cleaned = 0.00159361 Jy ! Component: 150 - total flux cleaned = -0.00134542 Jy ! Component: 200 - total flux cleaned = -0.00165495 Jy ! Total flux subtracted in 200 components = -0.00165495 Jy ! Clean residual min=-0.006690 max=0.006369 Jy/beam ! Clean residual mean=0.000044 rms=0.002026 Jy/beam ! Combined flux in latest and established models = 0.301606 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 61 model components to the UV plane model. ! The established model now contains 285 components and 0.301606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139352Jy sigma=0.000716 ! Fit after self-cal, rms=0.139411Jy sigma=0.000716 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.686 mas, bmaj=68.8 mas, bpa=2.117 degrees ! Estimated noise=28325.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012451 Jy ! Component: 100 - total flux cleaned = -0.0028439 Jy ! Component: 150 - total flux cleaned = -0.00454981 Jy ! Component: 200 - total flux cleaned = -0.00687447 Jy ! Total flux subtracted in 200 components = -0.00687447 Jy ! Clean residual min=-0.004555 max=0.004637 Jy/beam ! Clean residual mean=-0.000026 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 0.294731 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 55 model components to the UV plane model. ! The established model now contains 329 components and 0.294731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138768Jy sigma=0.000714 ! Fit after self-cal, rms=0.138753Jy sigma=0.000714 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.829 mas, bmaj=71.86 mas, bpa=0.3565 degrees ! Estimated noise=32308.9 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.354274 Jy ! Component: 100 - total flux cleaned = 0.474474 Jy ! Component: 150 - total flux cleaned = 0.474867 Jy ! Component: 200 - total flux cleaned = 0.474171 Jy ! Total flux subtracted in 200 components = 0.474171 Jy ! Clean residual min=-0.111851 max=0.117605 Jy/beam ! Clean residual mean=-0.000521 rms=0.030541 Jy/beam ! Combined flux in latest and established models = 0.474171 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.474171 Jy ! Inverting map and beam ! Estimated beam: bmin=7.777 mas, bmaj=71.68 mas, bpa=1.856 degrees ! Estimated noise=27740.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187825 Jy ! Component: 100 - total flux cleaned = 0.0152417 Jy ! Component: 150 - total flux cleaned = 0.01554 Jy ! Component: 200 - total flux cleaned = 0.0160584 Jy ! Total flux subtracted in 200 components = 0.0160584 Jy ! Clean residual min=-0.070232 max=0.066797 Jy/beam ! Clean residual mean=0.001018 rms=0.017779 Jy/beam ! Combined flux in latest and established models = 0.490229 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 64 components and 0.490229 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.686 mas, bmaj=68.8 mas, bpa=2.117 degrees ! Estimated noise=28325.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00912125 Jy ! Component: 100 - total flux cleaned = -0.00948256 Jy ! Component: 150 - total flux cleaned = -0.00997981 Jy ! Component: 200 - total flux cleaned = -0.0107352 Jy ! Total flux subtracted in 200 components = -0.0107352 Jy ! Clean residual min=-0.104259 max=0.109530 Jy/beam ! Clean residual mean=-0.001355 rms=0.032134 Jy/beam ! Combined flux in latest and established models = 0.479494 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 74 components and 0.479494 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=7.777 mas, bmaj=71.68 mas, bpa=1.856 degrees ! Estimated noise=27740.2 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110169 Jy ! Component: 100 - total flux cleaned = 0.00026217 Jy ! Component: 150 - total flux cleaned = -0.000835115 Jy ! Component: 200 - total flux cleaned = -0.00256415 Jy ! Total flux subtracted in 200 components = -0.00256415 Jy ! Clean residual min=-0.221637 max=0.233033 Jy/beam ! Clean residual mean=0.003249 rms=0.060075 Jy/beam ! Combined flux in latest and established models = 0.47693 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 78 components and 0.47693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255258Jy sigma=0.001364 ! Fit after self-cal, rms=0.244549Jy sigma=0.001280 wmodel J0231-3935_S_2002_05_14_yyk\_map.mod ! Writing 78 model components to file: J0231-3935_S_2002_05_14_yyk_map.mod wobs J0231-3935_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0231-3935_S_2002_05_14_yyk_uvs.fits wwins J0231-3935_S_2002_05_14_yyk\_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0231-3935_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.777 x 71.68 at 1.856 degrees (North through East) ! Clean map min=-0.2535 max=0.33065 Jy/beam ! Writing clean map to FITS file: J0231-3935_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.330651 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0645176 device "J0231-3935_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0231-3935_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -58.537 58.537 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.1935 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.33 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.777 x 71.68 at 1.856 degrees (North through East) ! Clean map min=-0.2535 max=0.33065 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0231-3935_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0231-3935_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0231-3935_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:03:15 2007