! Started logfile: J0229-3643_S_2002_05_14_yyk_uvs.log on Tue Jun 26 22:02:41 2007 obs J0229-3643_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0229-3643_S_2002_05_14_yyk_uva.fits ! AN table 1: 40 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.541111 visibilities/baseline/integration-bin. ! Found source: J0229-3643 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1153 lines of history. ! ! Reading 3896 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0229-3643_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.511334 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.826 mas, bmaj=20.48 mas, bpa=22.15 degrees ! Estimated noise=4698.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.379516 Jy ! Component: 100 - total flux cleaned = 0.467574 Jy ! Total flux subtracted in 100 components = 0.467574 Jy ! Clean residual min=-0.020112 max=0.022541 Jy/beam ! Clean residual mean=0.000417 rms=0.006993 Jy/beam ! Combined flux in latest and established models = 0.467574 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.467574 Jy ! ! Correcting IF 1. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.308970Jy sigma=0.001277 ! Fit after self-cal, rms=0.308073Jy sigma=0.001277 ! Inverting map and beam ! Estimated beam: bmin=2.826 mas, bmaj=20.48 mas, bpa=22.15 degrees ! Estimated noise=4703.85 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.679 mas, bmaj=24.14 mas, bpa=21.7 degrees ! Estimated noise=2282.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.033615 Jy ! Component: 100 - total flux cleaned = 0.0319837 Jy ! Component: 150 - total flux cleaned = 0.0301257 Jy ! Component: 200 - total flux cleaned = 0.0296767 Jy ! Total flux subtracted in 200 components = 0.0296767 Jy ! Clean residual min=-0.014328 max=0.013965 Jy/beam ! Clean residual mean=0.000041 rms=0.004809 Jy/beam ! Combined flux in latest and established models = 0.497251 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 55 components and 0.497251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.305030Jy sigma=0.001251 ! Fit after self-cal, rms=0.305017Jy sigma=0.001251 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.679 x 24.14 at 21.7 degrees (North through East) ! Clean map min=-0.019917 max=0.33315 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.927214 ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.12 HN 1.72 KP 1.00* ! LA 0.98 NL 0.97 OV 1.00 PT 1.10 ! SC 1.06 MK 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.922874 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 1.92 KP 1.00* ! LA 0.98 NL 0.99 OV 0.99 PT 1.01 ! SC 1.04 MK 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.935994 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.92 HN 1.53 KP 1.00* ! LA 1.00 NL 1.10 OV 1.00 PT 1.20 ! SC 0.96 MK 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.997106 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.86 HN 1.54 KP 1.00* ! LA 0.84 NL 1.01 OV 0.85 PT 1.01 ! SC 0.98 MK 1.00* ! ! ! Fit before self-cal, rms=0.305017Jy sigma=0.001251 ! Fit after self-cal, rms=0.358451Jy sigma=0.001246 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358451Jy sigma=0.001246 ! Fit after self-cal, rms=0.358455Jy sigma=0.001246 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.734 mas, bmaj=26.36 mas, bpa=22.21 degrees ! Estimated noise=2038.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0446613 Jy ! Component: 100 - total flux cleaned = -0.0588841 Jy ! Component: 150 - total flux cleaned = -0.061559 Jy ! Component: 200 - total flux cleaned = -0.0613811 Jy ! Total flux subtracted in 200 components = -0.0613811 Jy ! Clean residual min=-0.008367 max=0.009865 Jy/beam ! Clean residual mean=0.000412 rms=0.002634 Jy/beam ! Combined flux in latest and established models = 0.43587 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 84 components and 0.43587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.354638Jy sigma=0.001214 ! Fit after self-cal, rms=0.354625Jy sigma=0.001214 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.354625Jy sigma=0.001214 ! Fit after self-cal, rms=0.351482Jy sigma=0.001192 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000957874 Jy ! Component: 100 - total flux cleaned = 0.000619063 Jy ! Component: 150 - total flux cleaned = 0.000616289 Jy ! Component: 200 - total flux cleaned = 0.000758557 Jy ! Total flux subtracted in 200 components = 0.000758557 Jy ! Clean residual min=-0.007878 max=0.009642 Jy/beam ! Clean residual mean=0.000405 rms=0.002547 Jy/beam ! Combined flux in latest and established models = 0.436628 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 103 components and 0.436628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.351131Jy sigma=0.001191 ! Fit after self-cal, rms=0.350743Jy sigma=0.001188 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.734 x 26.36 at 22.21 degrees (North through East) ! Clean map min=-0.011593 max=0.31268 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.350743Jy sigma=0.001188 ! Fit after self-cal, rms=0.368199Jy sigma=0.001179 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.368199Jy sigma=0.001179 ! Fit after self-cal, rms=0.368128Jy sigma=0.001178 ! Inverting map and beam ! Estimated beam: bmin=3.732 mas, bmaj=26.46 mas, bpa=22.22 degrees ! Estimated noise=2031.64 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000658564 Jy ! Component: 100 - total flux cleaned = -0.000498981 Jy ! Component: 150 - total flux cleaned = -0.000353153 Jy ! Component: 200 - total flux cleaned = -8.10182e-05 Jy ! Total flux subtracted in 200 components = -8.10182e-05 Jy ! Clean residual min=-0.006282 max=0.008215 Jy/beam ! Clean residual mean=0.000394 rms=0.002157 Jy/beam ! Combined flux in latest and established models = 0.436547 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 111 components and 0.436547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.367799Jy sigma=0.001177 ! Fit after self-cal, rms=0.367770Jy sigma=0.001177 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.367770Jy sigma=0.001177 ! Fit after self-cal, rms=0.378719Jy sigma=0.001174 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.378719Jy sigma=0.001174 ! Fit after self-cal, rms=0.378706Jy sigma=0.001174 ! Inverting map and beam ! Estimated beam: bmin=3.737 mas, bmaj=26.57 mas, bpa=22.23 degrees ! Estimated noise=2029.71 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000653946 Jy ! Component: 100 - total flux cleaned = -0.000389252 Jy ! Component: 150 - total flux cleaned = -0.00026098 Jy ! Component: 200 - total flux cleaned = 0.000100411 Jy ! Total flux subtracted in 200 components = 0.000100411 Jy ! Clean residual min=-0.006216 max=0.008174 Jy/beam ! Clean residual mean=0.000380 rms=0.002085 Jy/beam ! Combined flux in latest and established models = 0.436647 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 114 components and 0.436647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.378432Jy sigma=0.001173 ! Fit after self-cal, rms=0.378420Jy sigma=0.001173 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.648 mas, bmaj=39.59 mas, bpa=11.16 degrees ! Estimated noise=2363.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00364046 Jy ! Component: 100 - total flux cleaned = 0.00417118 Jy ! Component: 150 - total flux cleaned = 0.00440634 Jy ! Component: 200 - total flux cleaned = 0.00455557 Jy ! Total flux subtracted in 200 components = 0.00455557 Jy ! Clean residual min=-0.005029 max=0.007023 Jy/beam ! Clean residual mean=0.000495 rms=0.002109 Jy/beam ! Combined flux in latest and established models = 0.441203 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 125 components and 0.441203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.378384Jy sigma=0.001173 ! Fit after self-cal, rms=0.378384Jy sigma=0.001173 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.808 mas, bmaj=21.97 mas, bpa=22.54 degrees ! Estimated noise=4399.54 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.346685 Jy ! Component: 100 - total flux cleaned = 0.410166 Jy ! Component: 150 - total flux cleaned = 0.425472 Jy ! Component: 200 - total flux cleaned = 0.430543 Jy ! Total flux subtracted in 200 components = 0.430543 Jy ! Clean residual min=-0.014157 max=0.011672 Jy/beam ! Clean residual mean=0.000407 rms=0.003920 Jy/beam ! Combined flux in latest and established models = 0.430542 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.430542 Jy ! Inverting map and beam ! Estimated beam: bmin=3.737 mas, bmaj=26.57 mas, bpa=22.23 degrees ! Estimated noise=2029.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00831208 Jy ! Component: 100 - total flux cleaned = 0.00837658 Jy ! Component: 150 - total flux cleaned = 0.0077223 Jy ! Component: 200 - total flux cleaned = 0.00721591 Jy ! Total flux subtracted in 200 components = 0.00721591 Jy ! Clean residual min=-0.006750 max=0.008109 Jy/beam ! Clean residual mean=0.000366 rms=0.002144 Jy/beam ! Combined flux in latest and established models = 0.437758 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 58 components and 0.437758 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.648 mas, bmaj=39.59 mas, bpa=11.16 degrees ! Estimated noise=2363.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000695016 Jy ! Component: 100 - total flux cleaned = 0.000452121 Jy ! Component: 150 - total flux cleaned = 0.000460002 Jy ! Component: 200 - total flux cleaned = 0.00038858 Jy ! Total flux subtracted in 200 components = 0.00038858 Jy ! Clean residual min=-0.005409 max=0.007401 Jy/beam ! Clean residual mean=0.000567 rms=0.002262 Jy/beam ! Combined flux in latest and established models = 0.438147 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 80 components and 0.438147 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.737 mas, bmaj=26.57 mas, bpa=22.23 degrees ! Estimated noise=2029.71 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000486308 Jy ! Component: 100 - total flux cleaned = -0.000387403 Jy ! Component: 150 - total flux cleaned = -4.23837e-05 Jy ! Component: 200 - total flux cleaned = 0.000178888 Jy ! Total flux subtracted in 200 components = 0.000178888 Jy ! Clean residual min=-0.006557 max=0.008276 Jy/beam ! Clean residual mean=0.000366 rms=0.001969 Jy/beam ! Combined flux in latest and established models = 0.438326 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 101 components and 0.438326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.377842Jy sigma=0.001172 ! Fit after self-cal, rms=0.377785Jy sigma=0.001172 wmodel J0229-3643_S_2002_05_14_yyk\_map.mod ! Writing 101 model components to file: J0229-3643_S_2002_05_14_yyk_map.mod wobs J0229-3643_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0229-3643_S_2002_05_14_yyk_uvs.fits wwins J0229-3643_S_2002_05_14_yyk\_map.win ! wwins: Wrote 1 windows to J0229-3643_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295182 Jy ! Component: 100 - total flux cleaned = 0.00387478 Jy ! Component: 150 - total flux cleaned = 0.00470427 Jy ! Component: 200 - total flux cleaned = 0.00462007 Jy ! Component: 250 - total flux cleaned = 0.00530101 Jy ! Component: 300 - total flux cleaned = 0.00595051 Jy ! Component: 350 - total flux cleaned = 0.00656843 Jy ! Component: 400 - total flux cleaned = 0.00683208 Jy ! Component: 450 - total flux cleaned = 0.00689596 Jy ! Component: 500 - total flux cleaned = 0.00708064 Jy ! Component: 550 - total flux cleaned = 0.00713872 Jy ! Component: 600 - total flux cleaned = 0.00725249 Jy ! Component: 650 - total flux cleaned = 0.00708609 Jy ! Component: 700 - total flux cleaned = 0.00681508 Jy ! Component: 750 - total flux cleaned = 0.00670984 Jy ! Component: 800 - total flux cleaned = 0.00671067 Jy ! Component: 850 - total flux cleaned = 0.0067109 Jy ! Component: 900 - total flux cleaned = 0.00666108 Jy ! Component: 950 - total flux cleaned = 0.00666046 Jy ! Component: 1000 - total flux cleaned = 0.00656496 Jy ! Component: 1050 - total flux cleaned = 0.00661179 Jy ! Component: 1100 - total flux cleaned = 0.00656501 Jy ! Component: 1150 - total flux cleaned = 0.00651988 Jy ! Component: 1200 - total flux cleaned = 0.00660966 Jy ! Component: 1250 - total flux cleaned = 0.00665315 Jy ! Component: 1300 - total flux cleaned = 0.00669632 Jy ! Component: 1350 - total flux cleaned = 0.00678188 Jy ! Component: 1400 - total flux cleaned = 0.00686608 Jy ! Component: 1450 - total flux cleaned = 0.00694831 Jy ! Component: 1500 - total flux cleaned = 0.00690742 Jy ! Component: 1550 - total flux cleaned = 0.00694787 Jy ! Component: 1600 - total flux cleaned = 0.00698813 Jy ! Component: 1650 - total flux cleaned = 0.00698824 Jy ! Component: 1700 - total flux cleaned = 0.0071039 Jy ! Component: 1750 - total flux cleaned = 0.00721896 Jy ! Component: 1800 - total flux cleaned = 0.00729591 Jy ! Component: 1850 - total flux cleaned = 0.00741063 Jy ! Component: 1900 - total flux cleaned = 0.00752503 Jy ! Component: 1950 - total flux cleaned = 0.00760155 Jy ! Component: 2000 - total flux cleaned = 0.00775383 Jy ! Total flux subtracted in 2048 components = 0.00786739 Jy ! Clean residual min=-0.002321 max=0.002066 Jy/beam ! Clean residual mean=0.000058 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.446193 Jy keep ! Adding 105 model components to the UV plane model. ! The established model now contains 206 components and 0.446193 Jy ![Exited script file: muppet] wmap "J0229-3643_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.737 x 26.57 at 22.23 degrees (North through East) ! Clean map min=-0.0094122 max=0.34962 Jy/beam ! Writing clean map to FITS file: J0229-3643_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.349616 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000716659 device "J0229-3643_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0229-3643_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.614954 0.614954 1.22991 2.45982 4.91963 9.83926 19.6785 39.357 78.7141 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.349 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.737 x 26.57 at 22.23 degrees (North through East) ! Clean map min=-0.0094122 max=0.34962 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0229-3643_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0229-3643_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0229-3643_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:02:48 2007