! Started logfile: J0229-3643_S_2002_01_31_yyk_uvs.log on Tue Jun 26 22:02:34 2007 obs J0229-3643_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0229-3643_S_2002_01_31_yyk_uva.fits ! AN table 1: 35 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.723175 visibilities/baseline/integration-bin. ! Found source: J0229-3643 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1224 lines of history. ! ! Reading 4556 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0229-3643_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.434974 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.566 mas, bmaj=6.735 mas, bpa=0.7689 degrees ! Estimated noise=3672.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.326581 Jy ! Component: 100 - total flux cleaned = 0.360889 Jy ! Total flux subtracted in 100 components = 0.360889 Jy ! Clean residual min=-0.020534 max=0.042264 Jy/beam ! Clean residual mean=0.000223 rms=0.007392 Jy/beam ! Combined flux in latest and established models = 0.360889 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.360889 Jy ! ! Correcting IF 1. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.213387Jy sigma=0.001278 ! Fit after self-cal, rms=0.213126Jy sigma=0.001277 ! Inverting map and beam ! Estimated beam: bmin=2.566 mas, bmaj=6.735 mas, bpa=0.7687 degrees ! Estimated noise=3675.3 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=7.997 mas, bpa=-2.028 degrees ! Estimated noise=1692.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, 15). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0350769 Jy ! Component: 100 - total flux cleaned = 0.0423304 Jy ! Component: 150 - total flux cleaned = 0.0429377 Jy ! Component: 200 - total flux cleaned = 0.0435005 Jy ! Total flux subtracted in 200 components = 0.0435005 Jy ! Clean residual min=-0.016183 max=0.024430 Jy/beam ! Clean residual mean=0.000559 rms=0.004656 Jy/beam ! Combined flux in latest and established models = 0.404389 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 21 components and 0.404389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207901Jy sigma=0.001250 ! Fit after self-cal, rms=0.207275Jy sigma=0.001245 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.946 x 7.997 at -2.028 degrees (North through East) ! Clean map min=-0.012123 max=0.36225 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.985336 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.18 HN 1.00* KP 0.97 ! LA 0.94 MK 0.93 NL 1.16 OV 0.96 ! PT 1.02 SC 1.07 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.980461 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.00* KP 1.00* ! LA 0.98 MK 1.06 NL 1.29 OV 0.95 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.966796 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.92 HN 1.00* KP 1.05 ! LA 0.94 MK 1.03 NL 1.31 OV 0.97 ! PT 1.14 SC 0.96 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01586 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.86 HN 1.00* KP 1.09 ! LA 0.79 MK 0.96 NL 1.33 OV 0.91 ! PT 0.98 SC 0.92 ! ! ! Fit before self-cal, rms=0.207275Jy sigma=0.001245 ! Fit after self-cal, rms=0.205101Jy sigma=0.001203 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205101Jy sigma=0.001203 ! Fit after self-cal, rms=0.205112Jy sigma=0.001203 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=7.922 mas, bpa=-1.639 degrees ! Estimated noise=1652.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00766395 Jy ! Component: 100 - total flux cleaned = -0.00871817 Jy ! Component: 150 - total flux cleaned = -0.00905678 Jy ! Component: 200 - total flux cleaned = -0.00906013 Jy ! Total flux subtracted in 200 components = -0.00906013 Jy ! Clean residual min=-0.005161 max=0.007759 Jy/beam ! Clean residual mean=0.000128 rms=0.001563 Jy/beam ! Combined flux in latest and established models = 0.395329 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 38 components and 0.395329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204772Jy sigma=0.001201 ! Fit after self-cal, rms=0.204746Jy sigma=0.001201 ! Inverting map ! Added new window around map position (36.5, 18). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00554981 Jy ! Component: 100 - total flux cleaned = 0.00499466 Jy ! Component: 150 - total flux cleaned = 0.00472427 Jy ! Component: 200 - total flux cleaned = 0.00450562 Jy ! Total flux subtracted in 200 components = 0.00450562 Jy ! Clean residual min=-0.004169 max=0.005470 Jy/beam ! Clean residual mean=0.000103 rms=0.001310 Jy/beam ! Combined flux in latest and established models = 0.399835 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 60 components and 0.399835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204458Jy sigma=0.001199 ! Fit after self-cal, rms=0.204443Jy sigma=0.001199 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204443Jy sigma=0.001199 ! Fit after self-cal, rms=0.201248Jy sigma=0.001180 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000629936 Jy ! Component: 100 - total flux cleaned = -0.000849041 Jy ! Component: 150 - total flux cleaned = -0.00104267 Jy ! Component: 200 - total flux cleaned = -0.00121679 Jy ! Total flux subtracted in 200 components = -0.00121679 Jy ! Clean residual min=-0.004290 max=0.005137 Jy/beam ! Clean residual mean=0.000107 rms=0.001285 Jy/beam ! Combined flux in latest and established models = 0.398618 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 82 components and 0.398618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201207Jy sigma=0.001179 ! Fit after self-cal, rms=0.200577Jy sigma=0.001176 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.931 x 7.922 at -1.639 degrees (North through East) ! Clean map min=-0.0041195 max=0.36115 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200577Jy sigma=0.001176 ! Fit after self-cal, rms=0.201402Jy sigma=0.001172 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201402Jy sigma=0.001172 ! Fit after self-cal, rms=0.201185Jy sigma=0.001170 ! Inverting map and beam ! Estimated beam: bmin=2.924 mas, bmaj=7.904 mas, bpa=-1.659 degrees ! Estimated noise=1648.9 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00166279 Jy ! Component: 100 - total flux cleaned = -0.0015995 Jy ! Component: 150 - total flux cleaned = -0.00147972 Jy ! Component: 200 - total flux cleaned = -0.00141691 Jy ! Total flux subtracted in 200 components = -0.00141691 Jy ! Clean residual min=-0.003953 max=0.004758 Jy/beam ! Clean residual mean=0.000105 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.397201 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 98 components and 0.397201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201138Jy sigma=0.001170 ! Fit after self-cal, rms=0.201021Jy sigma=0.001169 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201021Jy sigma=0.001169 ! Fit after self-cal, rms=0.201950Jy sigma=0.001167 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201950Jy sigma=0.001167 ! Fit after self-cal, rms=0.201892Jy sigma=0.001167 ! Inverting map and beam ! Estimated beam: bmin=2.921 mas, bmaj=7.893 mas, bpa=-1.648 degrees ! Estimated noise=1648.85 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115638 Jy ! Component: 100 - total flux cleaned = -0.00108925 Jy ! Component: 150 - total flux cleaned = -0.00108597 Jy ! Component: 200 - total flux cleaned = -0.0011419 Jy ! Total flux subtracted in 200 components = -0.0011419 Jy ! Clean residual min=-0.003888 max=0.004610 Jy/beam ! Clean residual mean=0.000100 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.396059 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 113 components and 0.396059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201854Jy sigma=0.001167 ! Fit after self-cal, rms=0.201820Jy sigma=0.001166 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.446 mas, bmaj=28.9 mas, bpa=3.938 degrees ! Estimated noise=2168.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000681434 Jy ! Component: 100 - total flux cleaned = -0.000954096 Jy ! Component: 150 - total flux cleaned = -0.00109565 Jy ! Component: 200 - total flux cleaned = -0.00122942 Jy ! Total flux subtracted in 200 components = -0.00122942 Jy ! Clean residual min=-0.003479 max=0.004269 Jy/beam ! Clean residual mean=0.000219 rms=0.001477 Jy/beam ! Combined flux in latest and established models = 0.39483 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 121 components and 0.39483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201824Jy sigma=0.001166 ! Fit after self-cal, rms=0.201806Jy sigma=0.001166 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.528 mas, bmaj=6.628 mas, bpa=0.3544 degrees ! Estimated noise=3627.84 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.32458 Jy ! Component: 100 - total flux cleaned = 0.371905 Jy ! Component: 150 - total flux cleaned = 0.383251 Jy ! Component: 200 - total flux cleaned = 0.389179 Jy ! Total flux subtracted in 200 components = 0.389179 Jy ! Clean residual min=-0.008738 max=0.010148 Jy/beam ! Clean residual mean=0.000043 rms=0.002586 Jy/beam ! Combined flux in latest and established models = 0.389179 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.389179 Jy ! Inverting map and beam ! Estimated beam: bmin=2.921 mas, bmaj=7.893 mas, bpa=-1.648 degrees ! Estimated noise=1648.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00685273 Jy ! Component: 100 - total flux cleaned = 0.00816491 Jy ! Component: 150 - total flux cleaned = 0.00897914 Jy ! Component: 200 - total flux cleaned = 0.00899201 Jy ! Total flux subtracted in 200 components = 0.00899201 Jy ! Clean residual min=-0.003877 max=0.004777 Jy/beam ! Clean residual mean=0.000091 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 0.398171 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 44 components and 0.398171 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.446 mas, bmaj=28.9 mas, bpa=3.938 degrees ! Estimated noise=2168.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000220888 Jy ! Component: 100 - total flux cleaned = -0.000556092 Jy ! Component: 150 - total flux cleaned = -0.000681535 Jy ! Component: 200 - total flux cleaned = -0.000785187 Jy ! Total flux subtracted in 200 components = -0.000785187 Jy ! Clean residual min=-0.004033 max=0.004489 Jy/beam ! Clean residual mean=0.000199 rms=0.001626 Jy/beam ! Combined flux in latest and established models = 0.397386 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.397386 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.921 mas, bmaj=7.893 mas, bpa=-1.648 degrees ! Estimated noise=1648.85 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -5.39996e-05 Jy ! Component: 100 - total flux cleaned = 0.000211396 Jy ! Component: 150 - total flux cleaned = 0.000353857 Jy ! Component: 200 - total flux cleaned = 0.000352566 Jy ! Total flux subtracted in 200 components = 0.000352566 Jy ! Clean residual min=-0.003743 max=0.004640 Jy/beam ! Clean residual mean=0.000093 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 0.397739 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 88 components and 0.397739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201824Jy sigma=0.001166 ! Fit after self-cal, rms=0.201820Jy sigma=0.001166 wmodel J0229-3643_S_2002_01_31_yyk\_map.mod ! Writing 88 model components to file: J0229-3643_S_2002_01_31_yyk_map.mod wobs J0229-3643_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J0229-3643_S_2002_01_31_yyk_uvs.fits wwins J0229-3643_S_2002_01_31_yyk\_map.win ! wwins: Wrote 3 windows to J0229-3643_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186155 Jy ! Component: 100 - total flux cleaned = 0.0024809 Jy ! Component: 150 - total flux cleaned = 0.00291872 Jy ! Component: 200 - total flux cleaned = 0.00286132 Jy ! Component: 250 - total flux cleaned = 0.00318883 Jy ! Component: 300 - total flux cleaned = 0.0035005 Jy ! Component: 350 - total flux cleaned = 0.00379982 Jy ! Component: 400 - total flux cleaned = 0.00408836 Jy ! Component: 450 - total flux cleaned = 0.00404114 Jy ! Component: 500 - total flux cleaned = 0.00417669 Jy ! Component: 550 - total flux cleaned = 0.00426542 Jy ! Component: 600 - total flux cleaned = 0.00430905 Jy ! Component: 650 - total flux cleaned = 0.00426692 Jy ! Component: 700 - total flux cleaned = 0.00422611 Jy ! Component: 750 - total flux cleaned = 0.00426638 Jy ! Component: 800 - total flux cleaned = 0.00422714 Jy ! Component: 850 - total flux cleaned = 0.00430476 Jy ! Component: 900 - total flux cleaned = 0.00441886 Jy ! Component: 950 - total flux cleaned = 0.00453016 Jy ! Component: 1000 - total flux cleaned = 0.00452986 Jy ! Component: 1050 - total flux cleaned = 0.00456619 Jy ! Component: 1100 - total flux cleaned = 0.00460214 Jy ! Component: 1150 - total flux cleaned = 0.0046369 Jy ! Component: 1200 - total flux cleaned = 0.00460231 Jy ! Component: 1250 - total flux cleaned = 0.00450022 Jy ! Component: 1300 - total flux cleaned = 0.00446666 Jy ! Component: 1350 - total flux cleaned = 0.00440059 Jy ! Component: 1400 - total flux cleaned = 0.00443346 Jy ! Component: 1450 - total flux cleaned = 0.00443347 Jy ! Component: 1500 - total flux cleaned = 0.00424202 Jy ! Component: 1550 - total flux cleaned = 0.00421095 Jy ! Component: 1600 - total flux cleaned = 0.00414836 Jy ! Component: 1650 - total flux cleaned = 0.00411762 Jy ! Component: 1700 - total flux cleaned = 0.0041483 Jy ! Component: 1750 - total flux cleaned = 0.00417767 Jy ! Component: 1800 - total flux cleaned = 0.00414749 Jy ! Component: 1850 - total flux cleaned = 0.00408848 Jy ! Component: 1900 - total flux cleaned = 0.0041176 Jy ! Component: 1950 - total flux cleaned = 0.00405938 Jy ! Component: 2000 - total flux cleaned = 0.00403052 Jy ! Total flux subtracted in 2048 components = 0.00400203 Jy ! Clean residual min=-0.001694 max=0.001663 Jy/beam ! Clean residual mean=0.000004 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.401741 Jy keep ! Adding 122 model components to the UV plane model. ! The established model now contains 210 components and 0.401741 Jy ![Exited script file: muppet] wmap "J0229-3643_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.921 x 7.893 at -1.648 degrees (North through East) ! Clean map min=-0.0032525 max=0.35859 Jy/beam ! Writing clean map to FITS file: J0229-3643_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.358592 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000554759 device "J0229-3643_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0229-3643_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.464115 0.464115 0.928229 1.85646 3.71292 7.42583 14.8517 29.7033 59.4067 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.358 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.921 x 7.893 at -1.648 degrees (North through East) ! Clean map min=-0.0032525 max=0.35859 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0229-3643_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0229-3643_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0229-3643_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 22:02:41 2007