! Started logfile: J0228-3719_X_2002_05_14_yyk_uvs.log on Tue Jun 26 22:02:26 2007 obs J0228-3719_X_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0228-3719_X_2002_05_14_yyk_uva.fits ! AN table 1: 37 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.456456 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0228-3719 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1076 lines of history. ! ! Reading 3040 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0228-3719_X_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.354825 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8371 mas, bmaj=6.871 mas, bpa=24.58 degrees ! Estimated noise=2402.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.039582 Jy ! Component: 100 - total flux cleaned = 0.039142 Jy ! Total flux subtracted in 100 components = 0.039142 Jy ! Clean residual min=-0.011636 max=0.011632 Jy/beam ! Clean residual mean=0.000021 rms=0.004589 Jy/beam ! Combined flux in latest and established models = 0.039142 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.039142 Jy ! ! Correcting IF 1. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.349958Jy sigma=0.001918 ! Fit after self-cal, rms=0.349720Jy sigma=0.001916 ! Inverting map and beam ! Estimated beam: bmin=0.8371 mas, bmaj=6.871 mas, bpa=24.58 degrees ! Estimated noise=2402.77 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.005 mas, bmaj=7.442 mas, bpa=23.55 degrees ! Estimated noise=1883.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00485066 Jy ! Component: 100 - total flux cleaned = 0.00427754 Jy ! Component: 150 - total flux cleaned = 0.00349022 Jy ! Component: 200 - total flux cleaned = 0.0018893 Jy ! Total flux subtracted in 200 components = 0.0018893 Jy ! Clean residual min=-0.003852 max=0.003845 Jy/beam ! Clean residual mean=0.000012 rms=0.001578 Jy/beam ! Combined flux in latest and established models = 0.0410313 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 51 model components to the UV plane model. ! The established model now contains 79 components and 0.0410313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348611Jy sigma=0.001908 ! Fit after self-cal, rms=0.348527Jy sigma=0.001908 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.005 x 7.442 at 23.55 degrees (North through East) ! Clean map min=-0.011019 max=0.036098 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Fit before self-cal, rms=0.348527Jy sigma=0.001908 ! Fit after self-cal, rms=0.348527Jy sigma=0.001908 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348527Jy sigma=0.001908 ! Fit after self-cal, rms=0.348526Jy sigma=0.001908 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.005 mas, bmaj=7.442 mas, bpa=23.55 degrees ! Estimated noise=1883.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145939 Jy ! Component: 100 - total flux cleaned = 0.000138098 Jy ! Component: 150 - total flux cleaned = -0.00086963 Jy ! Component: 200 - total flux cleaned = -0.00158591 Jy ! Total flux subtracted in 200 components = -0.00158591 Jy ! Clean residual min=-0.002907 max=0.002922 Jy/beam ! Clean residual mean=0.000029 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 0.0394454 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 59 model components to the UV plane model. ! The established model now contains 126 components and 0.0394454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348143Jy sigma=0.001905 ! Fit after self-cal, rms=0.348118Jy sigma=0.001905 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348118Jy sigma=0.001905 ! Fit after self-cal, rms=0.346006Jy sigma=0.001890 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00649454 Jy ! Component: 100 - total flux cleaned = 0.00617636 Jy ! Component: 150 - total flux cleaned = 0.00234496 Jy ! Component: 200 - total flux cleaned = 0.00170667 Jy ! Total flux subtracted in 200 components = 0.00170667 Jy ! Clean residual min=-0.003814 max=0.003808 Jy/beam ! Clean residual mean=0.000027 rms=0.001787 Jy/beam ! Combined flux in latest and established models = 0.0411521 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 62 model components to the UV plane model. ! The established model now contains 183 components and 0.0411521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.345099Jy sigma=0.001885 ! Fit after self-cal, rms=0.344633Jy sigma=0.001882 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.005 x 7.442 at 23.55 degrees (North through East) ! Clean map min=-0.010096 max=0.039531 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.512 mas, bmaj=12.36 mas, bpa=10.13 degrees ! Estimated noise=2202.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278792 Jy ! Component: 100 - total flux cleaned = 0.00280178 Jy ! Component: 150 - total flux cleaned = 0.00362716 Jy ! Component: 200 - total flux cleaned = 0.00471561 Jy ! Total flux subtracted in 200 components = 0.00471561 Jy ! Clean residual min=-0.001891 max=0.001910 Jy/beam ! Clean residual mean=0.000107 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.0458677 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 220 components and 0.0458677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.344272Jy sigma=0.001881 ! Fit after self-cal, rms=0.344072Jy sigma=0.001880 ! Inverting map ! Added new window around map position (1.8, 9.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116438 Jy ! Component: 100 - total flux cleaned = 0.00165363 Jy ! Component: 150 - total flux cleaned = 0.00215443 Jy ! Component: 200 - total flux cleaned = 0.00242123 Jy ! Total flux subtracted in 200 components = 0.00242123 Jy ! Clean residual min=-0.003034 max=0.002674 Jy/beam ! Clean residual mean=0.000056 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.0482889 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 246 components and 0.0482889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343829Jy sigma=0.001879 ! Fit after self-cal, rms=0.343644Jy sigma=0.001878 ! Inverting map ! Added new window around map position (24.2, -25.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000579021 Jy ! Component: 100 - total flux cleaned = 0.00131466 Jy ! Component: 150 - total flux cleaned = 0.00208838 Jy ! Component: 200 - total flux cleaned = 0.00243613 Jy ! Total flux subtracted in 200 components = 0.00243613 Jy ! Clean residual min=-0.002849 max=0.002842 Jy/beam ! Clean residual mean=0.000062 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.050725 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 260 components and 0.050725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343352Jy sigma=0.001876 ! Fit after self-cal, rms=0.343165Jy sigma=0.001876 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8371 mas, bmaj=6.871 mas, bpa=24.58 degrees ! Estimated noise=2402.77 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0586297 Jy ! Component: 100 - total flux cleaned = 0.0590653 Jy ! Component: 150 - total flux cleaned = 0.0589023 Jy ! Component: 200 - total flux cleaned = 0.0587091 Jy ! Total flux subtracted in 200 components = 0.0587091 Jy ! Clean residual min=-0.017638 max=0.016065 Jy/beam ! Clean residual mean=0.000084 rms=0.007008 Jy/beam ! Combined flux in latest and established models = 0.0587091 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 56 model components to the UV plane model. ! The established model now contains 56 components and 0.0587091 Jy ! Inverting map and beam ! Estimated beam: bmin=1.005 mas, bmaj=7.442 mas, bpa=23.55 degrees ! Estimated noise=1883.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00837854 Jy ! Component: 100 - total flux cleaned = 0.0108912 Jy ! Component: 150 - total flux cleaned = 0.011632 Jy ! Component: 200 - total flux cleaned = 0.0126743 Jy ! Total flux subtracted in 200 components = 0.0126743 Jy ! Clean residual min=-0.009249 max=0.010212 Jy/beam ! Clean residual mean=0.000051 rms=0.002641 Jy/beam ! Combined flux in latest and established models = 0.0713834 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 104 components and 0.0713834 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.512 mas, bmaj=12.36 mas, bpa=10.13 degrees ! Estimated noise=2202.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18.6, 9). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331173 Jy ! Component: 100 - total flux cleaned = 0.00159625 Jy ! Component: 150 - total flux cleaned = 0.000814907 Jy ! Component: 200 - total flux cleaned = -0.00103392 Jy ! Total flux subtracted in 200 components = -0.00103392 Jy ! Clean residual min=-0.003313 max=0.003414 Jy/beam ! Clean residual mean=0.000021 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 0.0703495 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 138 components and 0.0703495 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.005 mas, bmaj=7.442 mas, bpa=23.55 degrees ! Estimated noise=1883.51 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00567427 Jy ! Component: 100 - total flux cleaned = -0.00669316 Jy ! Component: 150 - total flux cleaned = -0.00639562 Jy ! Component: 200 - total flux cleaned = -0.00583644 Jy ! Total flux subtracted in 200 components = -0.00583644 Jy ! Clean residual min=-0.005704 max=0.004781 Jy/beam ! Clean residual mean=0.000008 rms=0.001736 Jy/beam ! Combined flux in latest and established models = 0.0645131 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 172 components and 0.0645131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342491Jy sigma=0.001873 ! Fit after self-cal, rms=0.342143Jy sigma=0.001871 wmodel J0228-3719_X_2002_05_14_yyk\_map.mod ! Writing 172 model components to file: J0228-3719_X_2002_05_14_yyk_map.mod wobs J0228-3719_X_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0228-3719_X_2002_05_14_yyk_uvs.fits wwins J0228-3719_X_2002_05_14_yyk\_map.win ! wwins: Wrote 3 windows to J0228-3719_X_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000371876 Jy ! Component: 100 - total flux cleaned = 0.000749208 Jy ! Component: 150 - total flux cleaned = 0.00102375 Jy ! Component: 200 - total flux cleaned = 0.00146576 Jy ! Component: 250 - total flux cleaned = 0.00205884 Jy ! Component: 300 - total flux cleaned = 0.00255271 Jy ! Component: 350 - total flux cleaned = 0.00295277 Jy ! Component: 400 - total flux cleaned = 0.00303159 Jy ! Component: 450 - total flux cleaned = 0.00326357 Jy ! Component: 500 - total flux cleaned = 0.0035669 Jy ! Component: 550 - total flux cleaned = 0.00393808 Jy ! Component: 600 - total flux cleaned = 0.0041574 Jy ! Component: 650 - total flux cleaned = 0.00430166 Jy ! Component: 700 - total flux cleaned = 0.00444314 Jy ! Component: 750 - total flux cleaned = 0.00472347 Jy ! Component: 800 - total flux cleaned = 0.00486169 Jy ! Component: 850 - total flux cleaned = 0.00506652 Jy ! Component: 900 - total flux cleaned = 0.00533681 Jy ! Component: 950 - total flux cleaned = 0.00553814 Jy ! Component: 1000 - total flux cleaned = 0.00606816 Jy ! Component: 1050 - total flux cleaned = 0.00652718 Jy ! Component: 1100 - total flux cleaned = 0.00704784 Jy ! Component: 1150 - total flux cleaned = 0.00775844 Jy ! Component: 1200 - total flux cleaned = 0.00839908 Jy ! Component: 1250 - total flux cleaned = 0.00909865 Jy ! Component: 1300 - total flux cleaned = 0.00972983 Jy ! Component: 1350 - total flux cleaned = 0.0103563 Jy ! Component: 1400 - total flux cleaned = 0.0110412 Jy ! Component: 1450 - total flux cleaned = 0.0116597 Jy ! Component: 1500 - total flux cleaned = 0.0124585 Jy ! Component: 1550 - total flux cleaned = 0.0131912 Jy ! Component: 1600 - total flux cleaned = 0.013859 Jy ! Component: 1650 - total flux cleaned = 0.0145848 Jy ! Component: 1700 - total flux cleaned = 0.0153667 Jy ! Component: 1750 - total flux cleaned = 0.0162049 Jy ! Component: 1800 - total flux cleaned = 0.0169796 Jy ! Component: 1850 - total flux cleaned = 0.0176922 Jy ! Component: 1900 - total flux cleaned = 0.0185204 Jy ! Component: 1950 - total flux cleaned = 0.0192872 Jy ! Component: 2000 - total flux cleaned = 0.0201109 Jy ! Total flux subtracted in 2048 components = 0.0208145 Jy ! Clean residual min=-0.003714 max=0.003084 Jy/beam ! Clean residual mean=0.000088 rms=0.001341 Jy/beam ! Combined flux in latest and established models = 0.0853276 Jy keep ! Adding 118 model components to the UV plane model. ! The established model now contains 286 components and 0.0853276 Jy ![Exited script file: muppet] wmap "J0228-3719_X_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.005 x 7.442 at 23.55 degrees (North through East) ! Clean map min=-0.0095218 max=0.038949 Jy/beam ! Writing clean map to FITS file: J0228-3719_X_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0389491 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0013709 device "J0228-3719_X_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0228-3719_X_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -10.5592 10.5592 21.1184 42.2368 84.4735 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0041 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.038 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.005 x 7.442 at 23.55 degrees (North through East) ! Clean map min=-0.0095218 max=0.038949 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0228-3719_X_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0228-3719_X_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0228-3719_X_2002_05_14_yyk_uvs.log closed on Tue Jun 26 22:02:34 2007