! Started logfile: J0227-3026_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:46:01 2007 obs J0227-3026_X_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0227-3026_X_2002_01_31_yyk_uva.fits ! AN table 1: 78 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.741311 visibilities/baseline/integration-bin. ! Found source: J0227-3026 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 10408 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 flag NL ! Flagging baselines of antenna 1:NL in the currently selected channels. ![@muppet J0227-3026_X_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.32762 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6336 mas, bmaj=1.539 mas, bpa=2.237 degrees ! Estimated noise=1715.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.224851 Jy ! Component: 100 - total flux cleaned = 0.266748 Jy ! Total flux subtracted in 100 components = 0.266748 Jy ! Clean residual min=-0.015363 max=0.022759 Jy/beam ! Clean residual mean=0.000004 rms=0.004005 Jy/beam ! Combined flux in latest and established models = 0.266748 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.266748 Jy ! ! Correcting IF 1. ! A total of 185 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 185 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 185 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.184699Jy sigma=0.001325 ! Fit after self-cal, rms=0.184561Jy sigma=0.001324 ! Inverting map and beam ! Estimated beam: bmin=0.6336 mas, bmaj=1.539 mas, bpa=2.237 degrees ! Estimated noise=1715.86 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8933 mas, bmaj=2.145 mas, bpa=3.851 degrees ! Estimated noise=985.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, -2.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157877 Jy ! Component: 100 - total flux cleaned = 0.0152117 Jy ! Component: 150 - total flux cleaned = 0.0147103 Jy ! Component: 200 - total flux cleaned = 0.0140679 Jy ! Total flux subtracted in 200 components = 0.0140679 Jy ! Clean residual min=-0.011152 max=0.009663 Jy/beam ! Clean residual mean=0.000099 rms=0.002725 Jy/beam ! Combined flux in latest and established models = 0.280816 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 22 components and 0.280816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183142Jy sigma=0.001312 ! Fit after self-cal, rms=0.183111Jy sigma=0.001311 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8933 x 2.145 at 3.851 degrees (North through East) ! Clean map min=-0.010578 max=0.26777 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01242 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.90 HN 1.00* KP 1.02 ! LA 1.14 MK 0.98 NL 1.00* OV 0.93 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01527 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.94 HN 1.00* KP 0.99 ! LA 1.11 MK 0.96 NL 1.00* OV 0.92 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.996781 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.85 HN 1.00* KP 0.98 ! LA 1.13 MK 1.05 NL 1.00* OV 0.95 ! PT 1.06 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.9846 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.87 HN 1.00* KP 1.04 ! LA 1.12 MK 1.06 NL 1.00* OV 0.99 ! PT 1.10 SC 0.96 ! ! ! Fit before self-cal, rms=0.183111Jy sigma=0.001311 ! Fit after self-cal, rms=0.179994Jy sigma=0.001295 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179994Jy sigma=0.001295 ! Fit after self-cal, rms=0.179999Jy sigma=0.001295 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.889 mas, bmaj=2.154 mas, bpa=4.645 degrees ! Estimated noise=979.699 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00441828 Jy ! Component: 100 - total flux cleaned = 0.0052831 Jy ! Component: 150 - total flux cleaned = 0.00562915 Jy ! Component: 200 - total flux cleaned = 0.00603356 Jy ! Total flux subtracted in 200 components = 0.00603356 Jy ! Clean residual min=-0.004219 max=0.004310 Jy/beam ! Clean residual mean=0.000025 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.286849 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.286849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179835Jy sigma=0.001293 ! Fit after self-cal, rms=0.179828Jy sigma=0.001293 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179828Jy sigma=0.001293 ! Fit after self-cal, rms=0.168949Jy sigma=0.001206 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016806 Jy ! Component: 100 - total flux cleaned = 0.0014165 Jy ! Component: 150 - total flux cleaned = 0.00161027 Jy ! Component: 200 - total flux cleaned = 0.00175745 Jy ! Total flux subtracted in 200 components = 0.00175745 Jy ! Clean residual min=-0.004440 max=0.004596 Jy/beam ! Clean residual mean=0.000029 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 0.288607 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.288607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168397Jy sigma=0.001202 ! Fit after self-cal, rms=0.166715Jy sigma=0.001188 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.889 x 2.154 at 4.645 degrees (North through East) ! Clean map min=-0.0048637 max=0.27343 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166715Jy sigma=0.001188 ! Fit after self-cal, rms=0.164536Jy sigma=0.001184 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164536Jy sigma=0.001184 ! Fit after self-cal, rms=0.164159Jy sigma=0.001180 ! Inverting map and beam ! Estimated beam: bmin=0.863 mas, bmaj=2.1 mas, bpa=5.737 degrees ! Estimated noise=967.963 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188368 Jy ! Component: 100 - total flux cleaned = 0.00224347 Jy ! Component: 150 - total flux cleaned = 0.00230356 Jy ! Component: 200 - total flux cleaned = 0.00235797 Jy ! Total flux subtracted in 200 components = 0.00235797 Jy ! Clean residual min=-0.003666 max=0.003803 Jy/beam ! Clean residual mean=0.000016 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 0.290965 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 64 components and 0.290965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164113Jy sigma=0.001180 ! Fit after self-cal, rms=0.163982Jy sigma=0.001179 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163982Jy sigma=0.001179 ! Fit after self-cal, rms=0.163700Jy sigma=0.001176 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163700Jy sigma=0.001176 ! Fit after self-cal, rms=0.163645Jy sigma=0.001176 ! Inverting map and beam ! Estimated beam: bmin=0.8591 mas, bmaj=2.09 mas, bpa=5.746 degrees ! Estimated noise=966.792 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011624 Jy ! Component: 100 - total flux cleaned = 0.00130969 Jy ! Component: 150 - total flux cleaned = 0.00140111 Jy ! Component: 200 - total flux cleaned = 0.00153055 Jy ! Total flux subtracted in 200 components = 0.00153055 Jy ! Clean residual min=-0.003697 max=0.003931 Jy/beam ! Clean residual mean=0.000012 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.292495 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 73 components and 0.292495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163630Jy sigma=0.001175 ! Fit after self-cal, rms=0.163603Jy sigma=0.001175 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.939 mas, bmaj=7.73 mas, bpa=13.11 degrees ! Estimated noise=1240.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000894334 Jy ! Component: 100 - total flux cleaned = 0.000999764 Jy ! Component: 150 - total flux cleaned = 0.00104062 Jy ! Component: 200 - total flux cleaned = 0.00105262 Jy ! Total flux subtracted in 200 components = 0.00105262 Jy ! Clean residual min=-0.003497 max=0.003349 Jy/beam ! Clean residual mean=0.000027 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.293548 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 85 components and 0.293548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163606Jy sigma=0.001175 ! Fit after self-cal, rms=0.163593Jy sigma=0.001175 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6273 mas, bmaj=1.532 mas, bpa=3.192 degrees ! Estimated noise=1654.55 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.230241 Jy ! Component: 100 - total flux cleaned = 0.269639 Jy ! Component: 150 - total flux cleaned = 0.284163 Jy ! Component: 200 - total flux cleaned = 0.287143 Jy ! Total flux subtracted in 200 components = 0.287143 Jy ! Clean residual min=-0.009128 max=0.009276 Jy/beam ! Clean residual mean=-0.000010 rms=0.002452 Jy/beam ! Combined flux in latest and established models = 0.287142 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.287142 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8591 mas, bmaj=2.09 mas, bpa=5.746 degrees ! Estimated noise=966.792 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, 2.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0057518 Jy ! Component: 100 - total flux cleaned = 0.00655979 Jy ! Component: 150 - total flux cleaned = 0.00704198 Jy ! Component: 200 - total flux cleaned = 0.00724023 Jy ! Total flux subtracted in 200 components = 0.00724023 Jy ! Clean residual min=-0.003708 max=0.004206 Jy/beam ! Clean residual mean=0.000010 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.294383 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 46 components and 0.294383 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.939 mas, bmaj=7.73 mas, bpa=13.11 degrees ! Estimated noise=1240.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000421461 Jy ! Component: 100 - total flux cleaned = 0.000583015 Jy ! Component: 150 - total flux cleaned = 0.000751788 Jy ! Component: 200 - total flux cleaned = 0.000677785 Jy ! Total flux subtracted in 200 components = 0.000677785 Jy ! Clean residual min=-0.003438 max=0.003702 Jy/beam ! Clean residual mean=0.000026 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.29506 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.29506 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8591 mas, bmaj=2.09 mas, bpa=5.746 degrees ! Estimated noise=966.792 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -8.48957e-05 Jy ! Component: 100 - total flux cleaned = -3.89092e-06 Jy ! Component: 150 - total flux cleaned = 6.66568e-05 Jy ! Component: 200 - total flux cleaned = 6.319e-05 Jy ! Total flux subtracted in 200 components = 6.319e-05 Jy ! Clean residual min=-0.003548 max=0.003627 Jy/beam ! Clean residual mean=0.000014 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.295124 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 65 components and 0.295124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163622Jy sigma=0.001175 ! Fit after self-cal, rms=0.163608Jy sigma=0.001175 wmodel J0227-3026_X_2002_01_31_yyk\_map.mod ! Writing 65 model components to file: J0227-3026_X_2002_01_31_yyk_map.mod wobs J0227-3026_X_2002_01_31_yyk\_uvs.fits ! Applying 78 buffered edits. ! Writing UV FITS file: J0227-3026_X_2002_01_31_yyk_uvs.fits wwins J0227-3026_X_2002_01_31_yyk\_map.win ! wwins: Wrote 3 windows to J0227-3026_X_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000257352 Jy ! Component: 100 - total flux cleaned = 0.000618254 Jy ! Component: 150 - total flux cleaned = 0.000957767 Jy ! Component: 200 - total flux cleaned = 0.00149844 Jy ! Component: 250 - total flux cleaned = 0.00206965 Jy ! Component: 300 - total flux cleaned = 0.00242124 Jy ! Component: 350 - total flux cleaned = 0.00290713 Jy ! Component: 400 - total flux cleaned = 0.00333171 Jy ! Component: 450 - total flux cleaned = 0.00365232 Jy ! Component: 500 - total flux cleaned = 0.004055 Jy ! Component: 550 - total flux cleaned = 0.00427417 Jy ! Component: 600 - total flux cleaned = 0.00461584 Jy ! Component: 650 - total flux cleaned = 0.00486587 Jy ! Component: 700 - total flux cleaned = 0.00511068 Jy ! Component: 750 - total flux cleaned = 0.00527029 Jy ! Component: 800 - total flux cleaned = 0.00538786 Jy ! Component: 850 - total flux cleaned = 0.00554216 Jy ! Component: 900 - total flux cleaned = 0.00580577 Jy ! Component: 950 - total flux cleaned = 0.00591668 Jy ! Component: 1000 - total flux cleaned = 0.00606254 Jy ! Component: 1050 - total flux cleaned = 0.00627706 Jy ! Component: 1100 - total flux cleaned = 0.00652241 Jy ! Component: 1150 - total flux cleaned = 0.006695 Jy ! Component: 1200 - total flux cleaned = 0.0068316 Jy ! Component: 1250 - total flux cleaned = 0.00710023 Jy ! Component: 1300 - total flux cleaned = 0.00726502 Jy ! Component: 1350 - total flux cleaned = 0.00749217 Jy ! Component: 1400 - total flux cleaned = 0.00768374 Jy ! Component: 1450 - total flux cleaned = 0.00790354 Jy ! Component: 1500 - total flux cleaned = 0.00799639 Jy ! Component: 1550 - total flux cleaned = 0.00833218 Jy ! Component: 1600 - total flux cleaned = 0.00854268 Jy ! Component: 1650 - total flux cleaned = 0.00869077 Jy ! Component: 1700 - total flux cleaned = 0.00889553 Jy ! Component: 1750 - total flux cleaned = 0.00904034 Jy ! Component: 1800 - total flux cleaned = 0.00921188 Jy ! Component: 1850 - total flux cleaned = 0.00943725 Jy ! Component: 1900 - total flux cleaned = 0.00954881 Jy ! Component: 1950 - total flux cleaned = 0.00968679 Jy ! Component: 2000 - total flux cleaned = 0.00976865 Jy ! Total flux subtracted in 2048 components = 0.00982272 Jy ! Clean residual min=-0.001651 max=0.001563 Jy/beam ! Clean residual mean=0.000013 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.304946 Jy keep ! Adding 123 model components to the UV plane model. ! The established model now contains 188 components and 0.304946 Jy ![Exited script file: muppet] wmap "J0227-3026_X_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8591 x 2.09 at 5.746 degrees (North through East) ! Clean map min=-0.002844 max=0.26412 Jy/beam ! Writing clean map to FITS file: J0227-3026_X_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.264122 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000485732 device "J0227-3026_X_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0227-3026_X_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.551712 0.551712 1.10342 2.20685 4.4137 8.8274 17.6548 35.3096 70.6192 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.264 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8591 x 2.09 at 5.746 degrees (North through East) ! Clean map min=-0.002844 max=0.26412 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0227-3026_X_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0227-3026_X_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0227-3026_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:46:08 2007