! Started logfile: J0227-3026_S_2002_01_31_yyk_uvs.log on Tue Jun 26 22:01:53 2007 obs J0227-3026_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0227-3026_S_2002_01_31_yyk_uva.fits ! AN table 1: 78 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.741311 visibilities/baseline/integration-bin. ! Found source: J0227-3026 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1224 lines of history. ! ! Reading 10408 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0227-3026_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.258905 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.43 mas, bmaj=5.951 mas, bpa=-2.364 degrees ! Estimated noise=1790.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.135457 Jy ! Component: 100 - total flux cleaned = 0.166777 Jy ! Total flux subtracted in 100 components = 0.166777 Jy ! Clean residual min=-0.009892 max=0.016237 Jy/beam ! Clean residual mean=0.000002 rms=0.003037 Jy/beam ! Combined flux in latest and established models = 0.166778 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.166778 Jy ! ! Correcting IF 1. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.198324Jy sigma=0.001262 ! Fit after self-cal, rms=0.198240Jy sigma=0.001261 ! Inverting map and beam ! Estimated beam: bmin=2.43 mas, bmaj=5.951 mas, bpa=-2.364 degrees ! Estimated noise=1790.54 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=7.758 mas, bpa=-1.671 degrees ! Estimated noise=1034.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 9.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173903 Jy ! Component: 100 - total flux cleaned = 0.0213511 Jy ! Component: 150 - total flux cleaned = 0.021974 Jy ! Component: 200 - total flux cleaned = 0.0225061 Jy ! Total flux subtracted in 200 components = 0.0225061 Jy ! Clean residual min=-0.005306 max=0.009121 Jy/beam ! Clean residual mean=0.000143 rms=0.001623 Jy/beam ! Combined flux in latest and established models = 0.189284 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 34 components and 0.189284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196976Jy sigma=0.001253 ! Fit after self-cal, rms=0.196886Jy sigma=0.001252 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.203 x 7.758 at -1.671 degrees (North through East) ! Clean map min=-0.0046915 max=0.15602 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01077 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.14 HN 1.00* KP 0.95 ! LA 0.96 MK 0.92 NL 1.00 OV 0.98 ! PT 1.06 SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.196886Jy sigma=0.001252 ! Fit after self-cal, rms=0.195594Jy sigma=0.001250 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195594Jy sigma=0.001250 ! Fit after self-cal, rms=0.195592Jy sigma=0.001250 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.174 mas, bmaj=7.691 mas, bpa=-2.087 degrees ! Estimated noise=1036.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504598 Jy ! Component: 100 - total flux cleaned = 0.00593589 Jy ! Component: 150 - total flux cleaned = 0.00646155 Jy ! Component: 200 - total flux cleaned = 0.0068231 Jy ! Total flux subtracted in 200 components = 0.0068231 Jy ! Clean residual min=-0.004765 max=0.005701 Jy/beam ! Clean residual mean=0.000106 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 0.196107 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 46 components and 0.196107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195400Jy sigma=0.001249 ! Fit after self-cal, rms=0.195384Jy sigma=0.001249 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195384Jy sigma=0.001249 ! Fit after self-cal, rms=0.193846Jy sigma=0.001238 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325946 Jy ! Component: 100 - total flux cleaned = 0.00368316 Jy ! Component: 150 - total flux cleaned = 0.00386362 Jy ! Component: 200 - total flux cleaned = 0.00394269 Jy ! Total flux subtracted in 200 components = 0.00394269 Jy ! Clean residual min=-0.005004 max=0.005302 Jy/beam ! Clean residual mean=0.000095 rms=0.001474 Jy/beam ! Combined flux in latest and established models = 0.200049 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 65 components and 0.200049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193723Jy sigma=0.001237 ! Fit after self-cal, rms=0.193561Jy sigma=0.001236 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.174 x 7.691 at -2.087 degrees (North through East) ! Clean map min=-0.0052498 max=0.1554 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193561Jy sigma=0.001236 ! Fit after self-cal, rms=0.192842Jy sigma=0.001234 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192842Jy sigma=0.001234 ! Fit after self-cal, rms=0.192772Jy sigma=0.001234 ! Inverting map and beam ! Estimated beam: bmin=3.13 mas, bmaj=7.569 mas, bpa=-1.482 degrees ! Estimated noise=1033.05 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193054 Jy ! Component: 100 - total flux cleaned = 0.00257584 Jy ! Component: 150 - total flux cleaned = 0.00289905 Jy ! Component: 200 - total flux cleaned = 0.00312444 Jy ! Total flux subtracted in 200 components = 0.00312444 Jy ! Clean residual min=-0.004617 max=0.005174 Jy/beam ! Clean residual mean=0.000073 rms=0.001354 Jy/beam ! Combined flux in latest and established models = 0.203174 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 84 components and 0.203174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192706Jy sigma=0.001234 ! Fit after self-cal, rms=0.192683Jy sigma=0.001233 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192683Jy sigma=0.001233 ! Fit after self-cal, rms=0.191096Jy sigma=0.001231 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191096Jy sigma=0.001231 ! Fit after self-cal, rms=0.191065Jy sigma=0.001231 ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=7.448 mas, bpa=-0.3627 degrees ! Estimated noise=1015.94 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00200044 Jy ! Component: 100 - total flux cleaned = -0.00222581 Jy ! Component: 150 - total flux cleaned = -0.00229851 Jy ! Component: 200 - total flux cleaned = -0.0021885 Jy ! Total flux subtracted in 200 components = -0.0021885 Jy ! Clean residual min=-0.004664 max=0.004672 Jy/beam ! Clean residual mean=0.000006 rms=0.001293 Jy/beam ! Combined flux in latest and established models = 0.200985 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 106 components and 0.200985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191026Jy sigma=0.001231 ! Fit after self-cal, rms=0.190944Jy sigma=0.001231 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.799 mas, bmaj=21.43 mas, bpa=4.022 degrees ! Estimated noise=1315.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167686 Jy ! Component: 100 - total flux cleaned = 0.000246901 Jy ! Component: 150 - total flux cleaned = 0.000245735 Jy ! Component: 200 - total flux cleaned = 0.000277932 Jy ! Total flux subtracted in 200 components = 0.000277933 Jy ! Clean residual min=-0.004560 max=0.004722 Jy/beam ! Clean residual mean=0.000023 rms=0.001663 Jy/beam ! Combined flux in latest and established models = 0.201263 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 111 components and 0.201263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190941Jy sigma=0.001231 ! Fit after self-cal, rms=0.190891Jy sigma=0.001230 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.419 mas, bmaj=5.877 mas, bpa=-1.636 degrees ! Estimated noise=1740.49 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.134854 Jy ! Component: 100 - total flux cleaned = 0.169548 Jy ! Component: 150 - total flux cleaned = 0.183946 Jy ! Component: 200 - total flux cleaned = 0.187944 Jy ! Total flux subtracted in 200 components = 0.187944 Jy ! Clean residual min=-0.008287 max=0.008305 Jy/beam ! Clean residual mean=-0.000050 rms=0.002173 Jy/beam ! Combined flux in latest and established models = 0.187944 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.187944 Jy ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=7.448 mas, bpa=-0.3627 degrees ! Estimated noise=1015.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0049546 Jy ! Component: 100 - total flux cleaned = 0.00663102 Jy ! Component: 150 - total flux cleaned = 0.00773471 Jy ! Component: 200 - total flux cleaned = 0.00867096 Jy ! Total flux subtracted in 200 components = 0.00867096 Jy ! Clean residual min=-0.004967 max=0.004794 Jy/beam ! Clean residual mean=0.000019 rms=0.001346 Jy/beam ! Combined flux in latest and established models = 0.196615 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 52 components and 0.196615 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.799 mas, bmaj=21.43 mas, bpa=4.022 degrees ! Estimated noise=1315.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157405 Jy ! Component: 100 - total flux cleaned = 0.00202612 Jy ! Component: 150 - total flux cleaned = 0.00242893 Jy ! Component: 200 - total flux cleaned = 0.00278793 Jy ! Total flux subtracted in 200 components = 0.00278793 Jy ! Clean residual min=-0.004638 max=0.004941 Jy/beam ! Clean residual mean=0.000036 rms=0.001677 Jy/beam ! Combined flux in latest and established models = 0.199403 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 0.199403 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=7.448 mas, bpa=-0.3627 degrees ! Estimated noise=1015.94 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000222298 Jy ! Component: 100 - total flux cleaned = 4.85522e-05 Jy ! Component: 150 - total flux cleaned = 0.000212815 Jy ! Component: 200 - total flux cleaned = 0.000435955 Jy ! Total flux subtracted in 200 components = 0.000435955 Jy ! Clean residual min=-0.004714 max=0.004462 Jy/beam ! Clean residual mean=0.000012 rms=0.001299 Jy/beam ! Combined flux in latest and established models = 0.199839 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 78 components and 0.199839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190921Jy sigma=0.001231 ! Fit after self-cal, rms=0.190907Jy sigma=0.001231 wmodel J0227-3026_S_2002_01_31_yyk\_map.mod ! Writing 78 model components to file: J0227-3026_S_2002_01_31_yyk_map.mod wobs J0227-3026_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J0227-3026_S_2002_01_31_yyk_uvs.fits wwins J0227-3026_S_2002_01_31_yyk\_map.win ! wwins: Wrote 2 windows to J0227-3026_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000613878 Jy ! Component: 100 - total flux cleaned = -0.00145549 Jy ! Component: 150 - total flux cleaned = -0.00202631 Jy ! Component: 200 - total flux cleaned = -0.00222958 Jy ! Component: 250 - total flux cleaned = -0.0025525 Jy ! Component: 300 - total flux cleaned = -0.0024278 Jy ! Component: 350 - total flux cleaned = -0.00231037 Jy ! Component: 400 - total flux cleaned = -0.00225157 Jy ! Component: 450 - total flux cleaned = -0.0019674 Jy ! Component: 500 - total flux cleaned = -0.00163729 Jy ! Component: 550 - total flux cleaned = -0.00147604 Jy ! Component: 600 - total flux cleaned = -0.00126621 Jy ! Component: 650 - total flux cleaned = -0.00106141 Jy ! Component: 700 - total flux cleaned = -0.000709843 Jy ! Component: 750 - total flux cleaned = -0.000415095 Jy ! Component: 800 - total flux cleaned = -7.79978e-05 Jy ! Component: 850 - total flux cleaned = 0.000251726 Jy ! Component: 900 - total flux cleaned = 0.000620999 Jy ! Component: 950 - total flux cleaned = 0.00107387 Jy ! Component: 1000 - total flux cleaned = 0.00151669 Jy ! Component: 1050 - total flux cleaned = 0.00186524 Jy ! Component: 1100 - total flux cleaned = 0.00229426 Jy ! Component: 1150 - total flux cleaned = 0.00267429 Jy ! Component: 1200 - total flux cleaned = 0.00313156 Jy ! Component: 1250 - total flux cleaned = 0.00358172 Jy ! Component: 1300 - total flux cleaned = 0.0041445 Jy ! Component: 1350 - total flux cleaned = 0.00442172 Jy ! Component: 1400 - total flux cleaned = 0.0048129 Jy ! Component: 1450 - total flux cleaned = 0.00531388 Jy ! Component: 1500 - total flux cleaned = 0.00573162 Jy ! Component: 1550 - total flux cleaned = 0.00606833 Jy ! Component: 1600 - total flux cleaned = 0.00636398 Jy ! Component: 1650 - total flux cleaned = 0.00669273 Jy ! Component: 1700 - total flux cleaned = 0.00716076 Jy ! Component: 1750 - total flux cleaned = 0.00751584 Jy ! Component: 1800 - total flux cleaned = 0.00790133 Jy ! Component: 1850 - total flux cleaned = 0.00821275 Jy ! Component: 1900 - total flux cleaned = 0.00855507 Jy ! Component: 1950 - total flux cleaned = 0.00889275 Jy ! Component: 2000 - total flux cleaned = 0.00919297 Jy ! Total flux subtracted in 2048 components = 0.00948931 Jy ! Clean residual min=-0.002063 max=0.002410 Jy/beam ! Clean residual mean=0.000062 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.209328 Jy keep ! Adding 136 model components to the UV plane model. ! The established model now contains 214 components and 0.209328 Jy ![Exited script file: muppet] wmap "J0227-3026_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.103 x 7.448 at -0.3627 degrees (North through East) ! Clean map min=-0.0053559 max=0.15237 Jy/beam ! Writing clean map to FITS file: J0227-3026_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.152374 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000658741 device "J0227-3026_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0227-3026_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.29696 1.29696 2.59391 5.18782 10.3756 20.7513 41.5026 83.0052 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.152 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.103 x 7.448 at -0.3627 degrees (North through East) ! Clean map min=-0.0053559 max=0.15237 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0227-3026_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0227-3026_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0227-3026_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 22:02:01 2007