! Started logfile: J0207-3857_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:45:25 2007 obs J0207-3857_X_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0207-3857_X_2002_01_31_yyk_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.694444 visibilities/baseline/integration-bin. ! Found source: J0207-3857 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 4500 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 flag NL ! Flagging baselines of antenna 1:NL in the currently selected channels. ![@muppet J0207-3857_X_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.22367 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6424 mas, bmaj=1.859 mas, bpa=5.015 degrees ! Estimated noise=2758.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0789055 Jy ! Component: 100 - total flux cleaned = 0.0788985 Jy ! Total flux subtracted in 100 components = 0.0788985 Jy ! Clean residual min=-0.018073 max=0.026942 Jy/beam ! Clean residual mean=0.000263 rms=0.006240 Jy/beam ! Combined flux in latest and established models = 0.0788985 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0788985 Jy ! ! Correcting IF 1. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.206663Jy sigma=0.001349 ! Fit after self-cal, rms=0.204653Jy sigma=0.001339 ! Inverting map and beam ! Estimated beam: bmin=0.6424 mas, bmaj=1.859 mas, bpa=5.015 degrees ! Estimated noise=2758.97 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8743 mas, bmaj=2.353 mas, bpa=5.15 degrees ! Estimated noise=1600.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137987 Jy ! Component: 100 - total flux cleaned = 0.0168173 Jy ! Component: 150 - total flux cleaned = 0.0169247 Jy ! Component: 200 - total flux cleaned = 0.0169692 Jy ! Total flux subtracted in 200 components = 0.0169692 Jy ! Clean residual min=-0.014078 max=0.016911 Jy/beam ! Clean residual mean=0.000415 rms=0.004398 Jy/beam ! Combined flux in latest and established models = 0.0958676 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 18 components and 0.0958676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204666Jy sigma=0.001334 ! Fit after self-cal, rms=0.204658Jy sigma=0.001334 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8743 x 2.353 at 5.15 degrees (North through East) ! Clean map min=-0.013002 max=0.09996 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.204658Jy sigma=0.001334 ! Fit after self-cal, rms=0.204229Jy sigma=0.001331 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204229Jy sigma=0.001331 ! Fit after self-cal, rms=0.204250Jy sigma=0.001331 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8739 mas, bmaj=2.352 mas, bpa=5.15 degrees ! Estimated noise=1601.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127793 Jy ! Component: 100 - total flux cleaned = -0.000169212 Jy ! Component: 150 - total flux cleaned = -0.000210362 Jy ! Component: 200 - total flux cleaned = -0.000211903 Jy ! Total flux subtracted in 200 components = -0.000211903 Jy ! Clean residual min=-0.014151 max=0.017175 Jy/beam ! Clean residual mean=0.000418 rms=0.004429 Jy/beam ! Combined flux in latest and established models = 0.0956557 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 25 components and 0.0956557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204240Jy sigma=0.001331 ! Fit after self-cal, rms=0.204225Jy sigma=0.001331 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204225Jy sigma=0.001331 ! Fit after self-cal, rms=0.202368Jy sigma=0.001319 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272339 Jy ! Component: 100 - total flux cleaned = 0.00280859 Jy ! Component: 150 - total flux cleaned = 0.00280545 Jy ! Component: 200 - total flux cleaned = 0.00273949 Jy ! Total flux subtracted in 200 components = 0.00273949 Jy ! Clean residual min=-0.012716 max=0.016098 Jy/beam ! Clean residual mean=0.000406 rms=0.004147 Jy/beam ! Combined flux in latest and established models = 0.0983952 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 30 components and 0.0983952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202391Jy sigma=0.001318 ! Fit after self-cal, rms=0.202035Jy sigma=0.001316 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8739 x 2.352 at 5.15 degrees (North through East) ! Clean map min=-0.011964 max=0.10492 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202035Jy sigma=0.001316 ! Fit after self-cal, rms=0.202035Jy sigma=0.001316 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202035Jy sigma=0.001316 ! Fit after self-cal, rms=0.201841Jy sigma=0.001315 ! Inverting map and beam ! Estimated beam: bmin=0.8739 mas, bmaj=2.352 mas, bpa=5.15 degrees ! Estimated noise=1601.69 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000482361 Jy ! Component: 100 - total flux cleaned = 0.000424115 Jy ! Component: 150 - total flux cleaned = 0.000422774 Jy ! Component: 200 - total flux cleaned = 0.000423697 Jy ! Total flux subtracted in 200 components = 0.000423697 Jy ! Clean residual min=-0.012829 max=0.015760 Jy/beam ! Clean residual mean=0.000406 rms=0.004060 Jy/beam ! Combined flux in latest and established models = 0.0988189 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.0988189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201833Jy sigma=0.001315 ! Fit after self-cal, rms=0.201694Jy sigma=0.001314 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201694Jy sigma=0.001314 ! Fit after self-cal, rms=0.201694Jy sigma=0.001314 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201694Jy sigma=0.001314 ! Fit after self-cal, rms=0.201612Jy sigma=0.001314 ! Inverting map and beam ! Estimated beam: bmin=0.8739 mas, bmaj=2.352 mas, bpa=5.15 degrees ! Estimated noise=1601.69 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171599 Jy ! Component: 100 - total flux cleaned = 0.000170278 Jy ! Component: 150 - total flux cleaned = 0.000119527 Jy ! Component: 200 - total flux cleaned = 0.000120285 Jy ! Total flux subtracted in 200 components = 0.000120285 Jy ! Clean residual min=-0.012806 max=0.015482 Jy/beam ! Clean residual mean=0.000398 rms=0.004009 Jy/beam ! Combined flux in latest and established models = 0.0989392 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 30 components and 0.0989392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201599Jy sigma=0.001314 ! Fit after self-cal, rms=0.201554Jy sigma=0.001314 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=11.75 mas, bpa=6.718 degrees ! Estimated noise=2001.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000595465 Jy ! Component: 100 - total flux cleaned = 0.000595822 Jy ! Component: 150 - total flux cleaned = 0.000631758 Jy ! Component: 200 - total flux cleaned = 0.000633099 Jy ! Total flux subtracted in 200 components = 0.000633099 Jy ! Clean residual min=-0.013146 max=0.017160 Jy/beam ! Clean residual mean=0.000686 rms=0.005574 Jy/beam ! Combined flux in latest and established models = 0.0995723 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 33 components and 0.0995723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201570Jy sigma=0.001314 ! Fit after self-cal, rms=0.201555Jy sigma=0.001314 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6424 mas, bmaj=1.859 mas, bpa=5.015 degrees ! Estimated noise=2759.07 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0881234 Jy ! Component: 100 - total flux cleaned = 0.0903838 Jy ! Component: 150 - total flux cleaned = 0.0890457 Jy ! Component: 200 - total flux cleaned = 0.0892172 Jy ! Total flux subtracted in 200 components = 0.0892172 Jy ! Clean residual min=-0.014578 max=0.016789 Jy/beam ! Clean residual mean=0.000132 rms=0.004785 Jy/beam ! Combined flux in latest and established models = 0.0892173 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0892173 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8739 mas, bmaj=2.352 mas, bpa=5.15 degrees ! Estimated noise=1601.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00838705 Jy ! Component: 100 - total flux cleaned = 0.00961911 Jy ! Component: 150 - total flux cleaned = 0.00981646 Jy ! Component: 200 - total flux cleaned = 0.00992789 Jy ! Total flux subtracted in 200 components = 0.00992789 Jy ! Clean residual min=-0.013021 max=0.015416 Jy/beam ! Clean residual mean=0.000392 rms=0.003998 Jy/beam ! Combined flux in latest and established models = 0.0991451 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 22 components and 0.0991452 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=11.75 mas, bpa=6.718 degrees ! Estimated noise=2001.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000592421 Jy ! Component: 100 - total flux cleaned = 0.000594247 Jy ! Component: 150 - total flux cleaned = 0.000629437 Jy ! Component: 200 - total flux cleaned = 0.00066413 Jy ! Total flux subtracted in 200 components = 0.00066413 Jy ! Clean residual min=-0.013161 max=0.017108 Jy/beam ! Clean residual mean=0.000683 rms=0.005558 Jy/beam ! Combined flux in latest and established models = 0.0998093 Jy ! Adding 3 model components to the UV plane model. ! The established model now contains 23 components and 0.0998093 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8739 mas, bmaj=2.352 mas, bpa=5.15 degrees ! Estimated noise=1601.69 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000694673 Jy ! Component: 100 - total flux cleaned = -0.000699111 Jy ! Component: 150 - total flux cleaned = -0.000744424 Jy ! Component: 200 - total flux cleaned = -0.0007434 Jy ! Total flux subtracted in 200 components = -0.0007434 Jy ! Clean residual min=-0.013012 max=0.015361 Jy/beam ! Clean residual mean=0.000391 rms=0.003995 Jy/beam ! Combined flux in latest and established models = 0.0990659 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.0990659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201558Jy sigma=0.001314 ! Fit after self-cal, rms=0.201546Jy sigma=0.001314 wmodel J0207-3857_X_2002_01_31_yyk\_map.mod ! Writing 26 model components to file: J0207-3857_X_2002_01_31_yyk_map.mod wobs J0207-3857_X_2002_01_31_yyk\_uvs.fits ! Applying 36 buffered edits. ! Writing UV FITS file: J0207-3857_X_2002_01_31_yyk_uvs.fits wwins J0207-3857_X_2002_01_31_yyk\_map.win ! wwins: Wrote 1 windows to J0207-3857_X_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504021 Jy ! Component: 100 - total flux cleaned = 0.00742993 Jy ! Component: 150 - total flux cleaned = 0.00914225 Jy ! Component: 200 - total flux cleaned = 0.010877 Jy ! Component: 250 - total flux cleaned = 0.0124584 Jy ! Component: 300 - total flux cleaned = 0.014047 Jy ! Component: 350 - total flux cleaned = 0.0156533 Jy ! Component: 400 - total flux cleaned = 0.0164032 Jy ! Component: 450 - total flux cleaned = 0.0168747 Jy ! Component: 500 - total flux cleaned = 0.0172044 Jy ! Component: 550 - total flux cleaned = 0.0175181 Jy ! Component: 600 - total flux cleaned = 0.0175165 Jy ! Component: 650 - total flux cleaned = 0.0173273 Jy ! Component: 700 - total flux cleaned = 0.0171461 Jy ! Component: 750 - total flux cleaned = 0.0169712 Jy ! Component: 800 - total flux cleaned = 0.0169745 Jy ! Component: 850 - total flux cleaned = 0.017057 Jy ! Component: 900 - total flux cleaned = 0.0171358 Jy ! Component: 950 - total flux cleaned = 0.0172902 Jy ! Component: 1000 - total flux cleaned = 0.0172912 Jy ! Component: 1050 - total flux cleaned = 0.0172916 Jy ! Component: 1100 - total flux cleaned = 0.017364 Jy ! Component: 1150 - total flux cleaned = 0.0175071 Jy ! Component: 1200 - total flux cleaned = 0.0175773 Jy ! Component: 1250 - total flux cleaned = 0.0175774 Jy ! Component: 1300 - total flux cleaned = 0.0176481 Jy ! Component: 1350 - total flux cleaned = 0.0177181 Jy ! Component: 1400 - total flux cleaned = 0.0178582 Jy ! Component: 1450 - total flux cleaned = 0.018139 Jy ! Component: 1500 - total flux cleaned = 0.0184899 Jy ! Component: 1550 - total flux cleaned = 0.0185604 Jy ! Component: 1600 - total flux cleaned = 0.0187019 Jy ! Component: 1650 - total flux cleaned = 0.0187738 Jy ! Component: 1700 - total flux cleaned = 0.018774 Jy ! Component: 1750 - total flux cleaned = 0.0188469 Jy ! Component: 1800 - total flux cleaned = 0.0189213 Jy ! Component: 1850 - total flux cleaned = 0.0189974 Jy ! Component: 1900 - total flux cleaned = 0.0190741 Jy ! Component: 1950 - total flux cleaned = 0.0192297 Jy ! Component: 2000 - total flux cleaned = 0.0193085 Jy ! Total flux subtracted in 2048 components = 0.019471 Jy ! Clean residual min=-0.004329 max=0.004306 Jy/beam ! Clean residual mean=0.000051 rms=0.001487 Jy/beam ! Combined flux in latest and established models = 0.118537 Jy keep ! Adding 122 model components to the UV plane model. ! The established model now contains 148 components and 0.118537 Jy ![Exited script file: muppet] wmap "J0207-3857_X_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8739 x 2.352 at 5.15 degrees (North through East) ! Clean map min=-0.0076685 max=0.10307 Jy/beam ! Writing clean map to FITS file: J0207-3857_X_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.10307 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0015247 device "J0207-3857_X_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0207-3857_X_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.43787 4.43787 8.87575 17.7515 35.503 71.006 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0045 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.103 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8739 x 2.352 at 5.15 degrees (North through East) ! Clean map min=-0.0076685 max=0.10307 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0207-3857_X_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0207-3857_X_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0207-3857_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:45:31 2007