! Started logfile: J0205-3444_S_2002_01_31_yyk_uvs.log on Tue Jun 26 21:59:27 2007 obs J0205-3444_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0205-3444_S_2002_01_31_yyk_uva.fits ! AN table 1: 77 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.748052 visibilities/baseline/integration-bin. ! Found source: J0205-3444 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1224 lines of history. ! ! Reading 10368 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0205-3444_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.262774 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.42 mas, bmaj=6.178 mas, bpa=0.1456 degrees ! Estimated noise=2221.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0565539 Jy ! Component: 100 - total flux cleaned = 0.0728657 Jy ! Total flux subtracted in 100 components = 0.0728657 Jy ! Clean residual min=-0.015944 max=0.017244 Jy/beam ! Clean residual mean=0.000002 rms=0.004309 Jy/beam ! Combined flux in latest and established models = 0.0728657 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0728657 Jy ! ! Correcting IF 1. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.251504Jy sigma=0.001526 ! Fit after self-cal, rms=0.250945Jy sigma=0.001522 ! Inverting map and beam ! Estimated beam: bmin=2.42 mas, bmaj=6.178 mas, bpa=0.1456 degrees ! Estimated noise=2221.73 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=8.044 mas, bpa=0.06335 degrees ! Estimated noise=1104.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227758 Jy ! Component: 100 - total flux cleaned = 0.0311549 Jy ! Component: 150 - total flux cleaned = 0.0343138 Jy ! Component: 200 - total flux cleaned = 0.0345899 Jy ! Total flux subtracted in 200 components = 0.0345899 Jy ! Clean residual min=-0.009662 max=0.016283 Jy/beam ! Clean residual mean=0.000164 rms=0.003682 Jy/beam ! Combined flux in latest and established models = 0.107456 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 31 components and 0.107456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250112Jy sigma=0.001513 ! Fit after self-cal, rms=0.250101Jy sigma=0.001513 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.191 x 8.044 at 0.06335 degrees (North through East) ! Clean map min=-0.0095205 max=0.067328 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.250101Jy sigma=0.001513 ! Fit after self-cal, rms=0.250101Jy sigma=0.001513 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250101Jy sigma=0.001513 ! Fit after self-cal, rms=0.250101Jy sigma=0.001513 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=8.044 mas, bpa=0.06335 degrees ! Estimated noise=1104.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000432232 Jy ! Component: 100 - total flux cleaned = 0.000554221 Jy ! Component: 150 - total flux cleaned = 0.000612621 Jy ! Component: 200 - total flux cleaned = 0.000722788 Jy ! Total flux subtracted in 200 components = 0.000722788 Jy ! Clean residual min=-0.009771 max=0.016250 Jy/beam ! Clean residual mean=0.000161 rms=0.003657 Jy/beam ! Combined flux in latest and established models = 0.108178 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.108178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250081Jy sigma=0.001513 ! Fit after self-cal, rms=0.250079Jy sigma=0.001513 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250079Jy sigma=0.001513 ! Fit after self-cal, rms=0.248086Jy sigma=0.001501 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8, -9.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177949 Jy ! Component: 100 - total flux cleaned = 0.0226314 Jy ! Component: 150 - total flux cleaned = 0.023449 Jy ! Component: 200 - total flux cleaned = 0.0239911 Jy ! Total flux subtracted in 200 components = 0.0239911 Jy ! Clean residual min=-0.008199 max=0.013476 Jy/beam ! Clean residual mean=0.000065 rms=0.002585 Jy/beam ! Combined flux in latest and established models = 0.13217 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 67 components and 0.132169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247240Jy sigma=0.001495 ! Fit after self-cal, rms=0.246676Jy sigma=0.001492 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.191 x 8.044 at 0.06335 degrees (North through East) ! Clean map min=-0.0076698 max=0.065752 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.955 mas, bmaj=25.92 mas, bpa=4.491 degrees ! Estimated noise=1394.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.009296 Jy ! Component: 100 - total flux cleaned = 0.0101215 Jy ! Component: 150 - total flux cleaned = 0.0105834 Jy ! Component: 200 - total flux cleaned = 0.0108908 Jy ! Total flux subtracted in 200 components = 0.0108908 Jy ! Clean residual min=-0.007347 max=0.009865 Jy/beam ! Clean residual mean=0.000071 rms=0.002544 Jy/beam ! Combined flux in latest and established models = 0.14306 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 100 components and 0.14306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246520Jy sigma=0.001491 ! Fit after self-cal, rms=0.246289Jy sigma=0.001489 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.42 mas, bmaj=6.178 mas, bpa=0.1456 degrees ! Estimated noise=2221.73 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0670309 Jy ! Component: 100 - total flux cleaned = 0.0900401 Jy ! Component: 150 - total flux cleaned = 0.105353 Jy ! Component: 200 - total flux cleaned = 0.116397 Jy ! Total flux subtracted in 200 components = 0.116397 Jy ! Clean residual min=-0.013135 max=0.013393 Jy/beam ! Clean residual mean=-0.000001 rms=0.003403 Jy/beam ! Combined flux in latest and established models = 0.116397 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.116397 Jy ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=8.044 mas, bpa=0.06335 degrees ! Estimated noise=1104.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.015533 Jy ! Component: 100 - total flux cleaned = 0.0229596 Jy ! Component: 150 - total flux cleaned = 0.0247823 Jy ! Component: 200 - total flux cleaned = 0.0255078 Jy ! Total flux subtracted in 200 components = 0.0255078 Jy ! Clean residual min=-0.007378 max=0.010236 Jy/beam ! Clean residual mean=0.000033 rms=0.001980 Jy/beam ! Combined flux in latest and established models = 0.141904 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 54 components and 0.141904 Jy ! Inverting map ! Added new window around map position (8.5, -8.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00807589 Jy ! Component: 100 - total flux cleaned = 0.00882416 Jy ! Component: 150 - total flux cleaned = 0.00924714 Jy ! Component: 200 - total flux cleaned = 0.00937615 Jy ! Total flux subtracted in 200 components = 0.00937615 Jy ! Clean residual min=-0.006472 max=0.005471 Jy/beam ! Clean residual mean=0.000002 rms=0.001659 Jy/beam ! Combined flux in latest and established models = 0.151281 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 74 components and 0.151281 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.955 mas, bmaj=25.92 mas, bpa=4.491 degrees ! Estimated noise=1394.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000595062 Jy ! Component: 100 - total flux cleaned = 0.00113559 Jy ! Component: 150 - total flux cleaned = 0.00142962 Jy ! Component: 200 - total flux cleaned = 0.00142944 Jy ! Total flux subtracted in 200 components = 0.00142944 Jy ! Clean residual min=-0.005980 max=0.004602 Jy/beam ! Clean residual mean=-0.000000 rms=0.001945 Jy/beam ! Combined flux in latest and established models = 0.15271 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 88 components and 0.15271 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=8.044 mas, bpa=0.06335 degrees ! Estimated noise=1104.36 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00043137 Jy ! Component: 100 - total flux cleaned = -0.000431121 Jy ! Component: 150 - total flux cleaned = -0.000337295 Jy ! Component: 200 - total flux cleaned = -0.000252595 Jy ! Total flux subtracted in 200 components = -0.000252595 Jy ! Clean residual min=-0.006427 max=0.005508 Jy/beam ! Clean residual mean=-0.000000 rms=0.001603 Jy/beam ! Combined flux in latest and established models = 0.152457 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 99 components and 0.152457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245677Jy sigma=0.001485 ! Fit after self-cal, rms=0.245472Jy sigma=0.001483 wmodel J0205-3444_S_2002_01_31_yyk\_map.mod ! Writing 99 model components to file: J0205-3444_S_2002_01_31_yyk_map.mod wobs J0205-3444_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J0205-3444_S_2002_01_31_yyk_uvs.fits wwins J0205-3444_S_2002_01_31_yyk\_map.win ! wwins: Wrote 3 windows to J0205-3444_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00214007 Jy ! Component: 100 - total flux cleaned = -0.00282726 Jy ! Component: 150 - total flux cleaned = -0.0030982 Jy ! Component: 200 - total flux cleaned = -0.00327055 Jy ! Component: 250 - total flux cleaned = -0.00335501 Jy ! Component: 300 - total flux cleaned = -0.00327308 Jy ! Component: 350 - total flux cleaned = -0.00296257 Jy ! Component: 400 - total flux cleaned = -0.00288732 Jy ! Component: 450 - total flux cleaned = -0.00281461 Jy ! Component: 500 - total flux cleaned = -0.00274524 Jy ! Component: 550 - total flux cleaned = -0.00267664 Jy ! Component: 600 - total flux cleaned = -0.00247363 Jy ! Component: 650 - total flux cleaned = -0.00227614 Jy ! Component: 700 - total flux cleaned = -0.0022758 Jy ! Component: 750 - total flux cleaned = -0.00227633 Jy ! Component: 800 - total flux cleaned = -0.00227704 Jy ! Component: 850 - total flux cleaned = -0.00209655 Jy ! Component: 900 - total flux cleaned = -0.00203799 Jy ! Component: 950 - total flux cleaned = -0.00203725 Jy ! Component: 1000 - total flux cleaned = -0.00203569 Jy ! Component: 1050 - total flux cleaned = -0.00192287 Jy ! Component: 1100 - total flux cleaned = -0.00214334 Jy ! Component: 1150 - total flux cleaned = -0.00203494 Jy ! Component: 1200 - total flux cleaned = -0.00219495 Jy ! Component: 1250 - total flux cleaned = -0.00214299 Jy ! Component: 1300 - total flux cleaned = -0.00229929 Jy ! Component: 1350 - total flux cleaned = -0.00245242 Jy ! Component: 1400 - total flux cleaned = -0.00260338 Jy ! Component: 1450 - total flux cleaned = -0.00260374 Jy ! Component: 1500 - total flux cleaned = -0.00275055 Jy ! Component: 1550 - total flux cleaned = -0.00284684 Jy ! Component: 1600 - total flux cleaned = -0.00279899 Jy ! Component: 1650 - total flux cleaned = -0.0027987 Jy ! Component: 1700 - total flux cleaned = -0.00284501 Jy ! Component: 1750 - total flux cleaned = -0.0027993 Jy ! Component: 1800 - total flux cleaned = -0.00280035 Jy ! Component: 1850 - total flux cleaned = -0.00284528 Jy ! Component: 1900 - total flux cleaned = -0.00288949 Jy ! Component: 1950 - total flux cleaned = -0.00302004 Jy ! Component: 2000 - total flux cleaned = -0.00284767 Jy ! Total flux subtracted in 2048 components = -0.00293339 Jy ! Clean residual min=-0.003234 max=0.002517 Jy/beam ! Clean residual mean=-0.000007 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.149524 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 224 components and 0.149524 Jy ![Exited script file: muppet] wmap "J0205-3444_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.191 x 8.044 at 0.06335 degrees (North through East) ! Clean map min=-0.0048985 max=0.070434 Jy/beam ! Writing clean map to FITS file: J0205-3444_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0704343 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000859606 device "J0205-3444_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0205-3444_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.66131 3.66131 7.32261 14.6452 29.2905 58.5809 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.191 x 8.044 at 0.06335 degrees (North through East) ! Clean map min=-0.0048985 max=0.070434 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0205-3444_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0205-3444_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0205-3444_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 21:59:35 2007