! Started logfile: J0155-4048_X_2002_05_14_yyk_uvs.log on Tue Jun 26 21:59:20 2007
obs J0155-4048_X_2002_05_14_yyk_uva.fits
! Reading UV FITS file: J0155-4048_X_2002_05_14_yyk_uva.fits
! AN table 1: 73 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.378995 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0155-4048
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40947e+09        8e+06          1        8e+06
!  02        2  8.47947e+09        8e+06          1        8e+06
!  03        3  8.79447e+09        8e+06          1        8e+06
!  04        4  8.89947e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1076 lines of history.
! 
! Reading 4980 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0155-4048_X_2002_05_14_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.38186 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7308 mas, bmaj=3.946 mas, bpa=22.14 degrees
! Estimated noise=2974.04 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.115747 Jy
! Component: 100  -  total flux cleaned = 0.180231 Jy
! Total flux subtracted in 100 components = 0.180231 Jy
! Clean residual min=-0.023370 max=0.025645 Jy/beam
! Clean residual mean=-0.000474 rms=0.008988 Jy/beam
! Combined flux in latest and established models = 0.180231 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 51 model components to the UV plane model.
! The established model now contains 51 components and 0.180231 Jy
! 
! Correcting IF 1.
!  A total of 269 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 269 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 269 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 269 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.340097Jy  sigma=0.001856
! Fit after  self-cal, rms=0.338805Jy  sigma=0.001852
! Inverting map and beam 
! Estimated beam: bmin=0.7308 mas, bmaj=3.946 mas, bpa=22.14 degrees
! Estimated noise=2974.04 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9688 mas, bmaj=5.048 mas, bpa=20.38 degrees
! Estimated noise=1614.24 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.110932 Jy
! Component: 100  -  total flux cleaned = 0.177967 Jy
! Component: 150  -  total flux cleaned = 0.209382 Jy
! Component: 200  -  total flux cleaned = 0.224109 Jy
! Total flux subtracted in 200 components = 0.224109 Jy
! Clean residual min=-0.015813 max=0.015993 Jy/beam
! Clean residual mean=-0.000695 rms=0.007750 Jy/beam
! Combined flux in latest and established models = 0.404339 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 138 model components to the UV plane model.
! The established model now contains 181 components and 0.40434 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.317877Jy  sigma=0.001622
! Fit after  self-cal, rms=0.317125Jy  sigma=0.001620
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9688 x 5.048 at 20.38 degrees (North through East)
! Clean map  min=-0.022568  max=0.1353 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    MK        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    MK        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    MK        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    MK        1.00*    
! 
! 
! Fit before self-cal, rms=0.317125Jy  sigma=0.001620
! Fit after  self-cal, rms=0.316366Jy  sigma=0.001620
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.316366Jy  sigma=0.001620
! Fit after  self-cal, rms=0.316352Jy  sigma=0.001619
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9688 mas, bmaj=5.048 mas, bpa=20.37 degrees
! Estimated noise=1615.05 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00892435 Jy
! Component: 100  -  total flux cleaned = 0.0171825 Jy
! Component: 150  -  total flux cleaned = 0.0217126 Jy
! Component: 200  -  total flux cleaned = 0.0248259 Jy
! Total flux subtracted in 200 components = 0.0248259 Jy
! Clean residual min=-0.007248 max=0.007239 Jy/beam
! Clean residual mean=-0.000224 rms=0.003629 Jy/beam
! Combined flux in latest and established models = 0.429165 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 106 model components to the UV plane model.
! The established model now contains 274 components and 0.429165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.313830Jy  sigma=0.001596
! Fit after  self-cal, rms=0.313780Jy  sigma=0.001595
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.313780Jy  sigma=0.001595
! Fit after  self-cal, rms=0.306670Jy  sigma=0.001517
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0183761 Jy
! Component: 100  -  total flux cleaned = 0.01964 Jy
! Component: 150  -  total flux cleaned = 0.0197379 Jy
! Component: 200  -  total flux cleaned = 0.0210499 Jy
! Total flux subtracted in 200 components = 0.0210499 Jy
! Clean residual min=-0.004863 max=0.004890 Jy/beam
! Clean residual mean=-0.000005 rms=0.002336 Jy/beam
! Combined flux in latest and established models = 0.450215 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 94 model components to the UV plane model.
! The established model now contains 367 components and 0.450215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.305296Jy  sigma=0.001503
! Fit after  self-cal, rms=0.304207Jy  sigma=0.001491
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9688 x 5.048 at 20.37 degrees (North through East)
! Clean map  min=-0.012388  max=0.13271 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.304207Jy  sigma=0.001491
! Fit after  self-cal, rms=0.302793Jy  sigma=0.001491
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.302793Jy  sigma=0.001491
! Fit after  self-cal, rms=0.302681Jy  sigma=0.001490
! Inverting map and beam 
! Estimated beam: bmin=0.9629 mas, bmaj=5.063 mas, bpa=20.25 degrees
! Estimated noise=1595.88 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00299967 Jy
! Component: 100  -  total flux cleaned = -0.00224953 Jy
! Component: 150  -  total flux cleaned = -0.00193586 Jy
! Component: 200  -  total flux cleaned = -0.00110004 Jy
! Total flux subtracted in 200 components = -0.00110004 Jy
! Clean residual min=-0.003425 max=0.003421 Jy/beam
! Clean residual mean=0.000093 rms=0.001550 Jy/beam
! Combined flux in latest and established models = 0.449115 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 64 model components to the UV plane model.
! The established model now contains 428 components and 0.449115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.302104Jy  sigma=0.001485
! Fit after  self-cal, rms=0.302080Jy  sigma=0.001485
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.302080Jy  sigma=0.001485
! Fit after  self-cal, rms=0.296905Jy  sigma=0.001482
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.296905Jy  sigma=0.001482
! Fit after  self-cal, rms=0.296942Jy  sigma=0.001482
! Inverting map and beam 
! Estimated beam: bmin=0.9681 mas, bmaj=5.047 mas, bpa=20.24 degrees
! Estimated noise=1581.25 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00105034 Jy
! Component: 100  -  total flux cleaned = -0.000786896 Jy
! Component: 150  -  total flux cleaned = -0.000116528 Jy
! Component: 200  -  total flux cleaned = 0.0011378 Jy
! Total flux subtracted in 200 components = 0.0011378 Jy
! Clean residual min=-0.002507 max=0.002524 Jy/beam
! Clean residual mean=0.000066 rms=0.000971 Jy/beam
! Combined flux in latest and established models = 0.450253 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 57 model components to the UV plane model.
! The established model now contains 474 components and 0.450253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.296589Jy  sigma=0.001480
! Fit after  self-cal, rms=0.296594Jy  sigma=0.001480
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.424 mas, bmaj=9.832 mas, bpa=7.046 degrees
! Estimated noise=1925.76 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00181779 Jy
! Component: 100  -  total flux cleaned = -0.00130116 Jy
! Component: 150  -  total flux cleaned = -0.000803703 Jy
! Component: 200  -  total flux cleaned = -0.000123932 Jy
! Total flux subtracted in 200 components = -0.000123932 Jy
! Clean residual min=-0.002137 max=0.002116 Jy/beam
! Clean residual mean=0.000123 rms=0.000845 Jy/beam
! Combined flux in latest and established models = 0.450129 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 42 model components to the UV plane model.
! The established model now contains 514 components and 0.450129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.296482Jy  sigma=0.001479
! Fit after  self-cal, rms=0.296464Jy  sigma=0.001479
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7309 mas, bmaj=3.934 mas, bpa=22.04 degrees
! Estimated noise=2919.17 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.122859 Jy
! Component: 100  -  total flux cleaned = 0.189017 Jy
! Component: 150  -  total flux cleaned = 0.226123 Jy
! Component: 200  -  total flux cleaned = 0.248712 Jy
! Total flux subtracted in 200 components = 0.248712 Jy
! Clean residual min=-0.018382 max=0.018507 Jy/beam
! Clean residual mean=-0.000383 rms=0.007080 Jy/beam
! Combined flux in latest and established models = 0.248712 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 84 model components to the UV plane model.
! The established model now contains 84 components and 0.248712 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9681 mas, bmaj=5.047 mas, bpa=20.24 degrees
! Estimated noise=1581.25 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0878332 Jy
! Component: 100  -  total flux cleaned = 0.135637 Jy
! Component: 150  -  total flux cleaned = 0.152874 Jy
! Component: 200  -  total flux cleaned = 0.161391 Jy
! Total flux subtracted in 200 components = 0.161391 Jy
! Clean residual min=-0.013355 max=0.013232 Jy/beam
! Clean residual mean=-0.000605 rms=0.006615 Jy/beam
! Combined flux in latest and established models = 0.410103 Jy
! Adding 132 model components to the UV plane model.
! The established model now contains 207 components and 0.410103 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.424 mas, bmaj=9.832 mas, bpa=7.046 degrees
! Estimated noise=1925.76 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169425 Jy
! Component: 100  -  total flux cleaned = 0.0235775 Jy
! Component: 150  -  total flux cleaned = 0.0188447 Jy
! Component: 200  -  total flux cleaned = 0.018298 Jy
! Total flux subtracted in 200 components = 0.018298 Jy
! Clean residual min=-0.005631 max=0.005637 Jy/beam
! Clean residual mean=-0.000106 rms=0.003156 Jy/beam
! Combined flux in latest and established models = 0.428401 Jy
! Adding 130 model components to the UV plane model.
! The established model now contains 332 components and 0.428401 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9681 mas, bmaj=5.047 mas, bpa=20.24 degrees
! Estimated noise=1581.25 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00177483 Jy
! Component: 100  -  total flux cleaned = -0.000837755 Jy
! Component: 150  -  total flux cleaned = -0.00149491 Jy
! Component: 200  -  total flux cleaned = -0.00331955 Jy
! Total flux subtracted in 200 components = -0.00331955 Jy
! Clean residual min=-0.003626 max=0.003586 Jy/beam
! Clean residual mean=0.000014 rms=0.001459 Jy/beam
! Combined flux in latest and established models = 0.425082 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 53 model components to the UV plane model.
! The established model now contains 384 components and 0.425082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.296876Jy  sigma=0.001481
! Fit after  self-cal, rms=0.296851Jy  sigma=0.001481
wmodel J0155-4048_X_2002_05_14_yyk\_map.mod
! Writing 384 model components to file: J0155-4048_X_2002_05_14_yyk_map.mod
wobs J0155-4048_X_2002_05_14_yyk\_uvs.fits
! Writing UV FITS file: J0155-4048_X_2002_05_14_yyk_uvs.fits
wwins J0155-4048_X_2002_05_14_yyk\_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: muppet]
! 
wmap "J0155-4048_X_2002_05_14_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9681 x 5.047 at 20.24 degrees (North through East)
! Clean map  min=-0.011694  max=0.12849 Jy/beam
! Writing clean map to FITS file: J0155-4048_X_2002_05_14_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.128495 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00141921 
device "J0155-4048_X_2002_05_14_yyk\_map.eps/VPS"
! Attempting to open device: 'J0155-4048_X_2002_05_14_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.31347 3.31347 6.62694 13.2539 26.5077 53.0155
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0042 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.128 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9681 x 5.047 at 20.24 degrees (North through East)
! Clean map  min=-0.011694  max=0.12849 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0155-4048_X_2002_05_14_yyk\_map.gif/gif"
! Attempting to open device: 'J0155-4048_X_2002_05_14_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0155-4048_X_2002_05_14_yyk_uvs.log closed on Tue Jun 26 21:59:27 2007