! Started logfile: J0144-3938_X_2002_05_14_yyk_uvs.log on Tue Jun 26 21:58:24 2007 obs J0144-3938_X_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0144-3938_X_2002_05_14_yyk_uva.fits ! AN table 1: 38 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.304094 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0144-3938 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1076 lines of history. ! ! Reading 2080 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0144-3938_X_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.288856 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8303 mas, bmaj=7.057 mas, bpa=28.64 degrees ! Estimated noise=2777.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.108205 Jy ! Component: 100 - total flux cleaned = 0.120391 Jy ! Total flux subtracted in 100 components = 0.120391 Jy ! Clean residual min=-0.012857 max=0.013077 Jy/beam ! Clean residual mean=-0.000074 rms=0.005462 Jy/beam ! Combined flux in latest and established models = 0.120391 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.120391 Jy ! ! Correcting IF 1. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.265205Jy sigma=0.001523 ! Fit after self-cal, rms=0.263635Jy sigma=0.001517 ! Inverting map and beam ! Estimated beam: bmin=0.8303 mas, bmaj=7.056 mas, bpa=28.64 degrees ! Estimated noise=2782.38 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9723 mas, bmaj=7.778 mas, bpa=28.11 degrees ! Estimated noise=2346.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0181072 Jy ! Component: 100 - total flux cleaned = 0.0266125 Jy ! Component: 150 - total flux cleaned = 0.0291877 Jy ! Component: 200 - total flux cleaned = 0.0322539 Jy ! Total flux subtracted in 200 components = 0.0322539 Jy ! Clean residual min=-0.004572 max=0.004590 Jy/beam ! Clean residual mean=-0.000024 rms=0.001684 Jy/beam ! Combined flux in latest and established models = 0.152645 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 60 model components to the UV plane model. ! The established model now contains 85 components and 0.152645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262405Jy sigma=0.001506 ! Fit after self-cal, rms=0.262415Jy sigma=0.001506 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9723 x 7.778 at 28.11 degrees (North through East) ! Clean map min=-0.007963 max=0.072756 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Fit before self-cal, rms=0.262415Jy sigma=0.001506 ! Fit after self-cal, rms=0.262046Jy sigma=0.001505 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262046Jy sigma=0.001505 ! Fit after self-cal, rms=0.262007Jy sigma=0.001505 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9746 mas, bmaj=7.788 mas, bpa=28.09 degrees ! Estimated noise=2352.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000777205 Jy ! Component: 100 - total flux cleaned = -0.00239356 Jy ! Component: 150 - total flux cleaned = -0.00241751 Jy ! Component: 200 - total flux cleaned = -0.00107499 Jy ! Total flux subtracted in 200 components = -0.00107499 Jy ! Clean residual min=-0.002826 max=0.002855 Jy/beam ! Clean residual mean=-0.000004 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.15157 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 47 model components to the UV plane model. ! The established model now contains 130 components and 0.15157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261695Jy sigma=0.001503 ! Fit after self-cal, rms=0.261670Jy sigma=0.001503 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261670Jy sigma=0.001503 ! Fit after self-cal, rms=0.257320Jy sigma=0.001468 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00688369 Jy ! Component: 100 - total flux cleaned = 0.00406199 Jy ! Component: 150 - total flux cleaned = 0.00164436 Jy ! Component: 200 - total flux cleaned = -0.000299046 Jy ! Total flux subtracted in 200 components = -0.000299046 Jy ! Clean residual min=-0.002307 max=0.002304 Jy/beam ! Clean residual mean=-0.000023 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.151271 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 59 model components to the UV plane model. ! The established model now contains 187 components and 0.151271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256905Jy sigma=0.001465 ! Fit after self-cal, rms=0.256079Jy sigma=0.001457 ! Inverting map ! Added new window around map position (0.4, 2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00346595 Jy ! Component: 100 - total flux cleaned = 0.00506859 Jy ! Component: 150 - total flux cleaned = 0.00592391 Jy ! Component: 200 - total flux cleaned = 0.00657408 Jy ! Total flux subtracted in 200 components = 0.00657408 Jy ! Clean residual min=-0.002623 max=0.003232 Jy/beam ! Clean residual mean=-0.000020 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.157845 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 58 model components to the UV plane model. ! The established model now contains 244 components and 0.157845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256017Jy sigma=0.001456 ! Fit after self-cal, rms=0.255797Jy sigma=0.001453 ! Inverting map ! Added new window around map position (-19.6, 24). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126764 Jy ! Component: 100 - total flux cleaned = -0.00197393 Jy ! Component: 150 - total flux cleaned = -0.00198276 Jy ! Component: 200 - total flux cleaned = -0.0016766 Jy ! Total flux subtracted in 200 components = -0.0016766 Jy ! Clean residual min=-0.002371 max=0.002529 Jy/beam ! Clean residual mean=-0.000013 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.156168 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 268 components and 0.156168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255610Jy sigma=0.001452 ! Fit after self-cal, rms=0.255505Jy sigma=0.001451 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9746 x 7.788 at 28.09 degrees (North through East) ! Clean map min=-0.006063 max=0.075745 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.661 mas, bmaj=12.94 mas, bpa=13.34 degrees ! Estimated noise=2814.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000630689 Jy ! Component: 100 - total flux cleaned = 0.000844249 Jy ! Component: 150 - total flux cleaned = 0.000782073 Jy ! Component: 200 - total flux cleaned = 0.000994194 Jy ! Total flux subtracted in 200 components = 0.000994194 Jy ! Clean residual min=-0.002253 max=0.001945 Jy/beam ! Clean residual mean=-0.000023 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.157163 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 288 components and 0.157163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255450Jy sigma=0.001451 ! Fit after self-cal, rms=0.255414Jy sigma=0.001450 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8302 mas, bmaj=7.055 mas, bpa=28.65 degrees ! Estimated noise=2790 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.116821 Jy ! Component: 100 - total flux cleaned = 0.136112 Jy ! Component: 150 - total flux cleaned = 0.138466 Jy ! Component: 200 - total flux cleaned = 0.14278 Jy ! Total flux subtracted in 200 components = 0.14278 Jy ! Clean residual min=-0.009361 max=0.010661 Jy/beam ! Clean residual mean=-0.000014 rms=0.003324 Jy/beam ! Combined flux in latest and established models = 0.14278 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 0.14278 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9746 mas, bmaj=7.788 mas, bpa=28.09 degrees ! Estimated noise=2352.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133477 Jy ! Component: 100 - total flux cleaned = 0.00350917 Jy ! Component: 150 - total flux cleaned = 0.00592243 Jy ! Component: 200 - total flux cleaned = 0.00774539 Jy ! Total flux subtracted in 200 components = 0.00774539 Jy ! Clean residual min=-0.007965 max=0.008608 Jy/beam ! Clean residual mean=-0.000011 rms=0.002248 Jy/beam ! Combined flux in latest and established models = 0.150526 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 87 components and 0.150526 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.661 mas, bmaj=12.94 mas, bpa=13.34 degrees ! Estimated noise=2814.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000814527 Jy ! Component: 100 - total flux cleaned = 0.00284703 Jy ! Component: 150 - total flux cleaned = 0.00489859 Jy ! Component: 200 - total flux cleaned = 0.00568168 Jy ! Total flux subtracted in 200 components = 0.00568168 Jy ! Clean residual min=-0.007774 max=0.008493 Jy/beam ! Clean residual mean=-0.000008 rms=0.002086 Jy/beam ! Combined flux in latest and established models = 0.156208 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 118 components and 0.156208 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9746 mas, bmaj=7.788 mas, bpa=28.09 degrees ! Estimated noise=2352.48 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000334697 Jy ! Component: 100 - total flux cleaned = 0.00137001 Jy ! Component: 150 - total flux cleaned = 0.00178472 Jy ! Component: 200 - total flux cleaned = 0.00280853 Jy ! Total flux subtracted in 200 components = 0.00280853 Jy ! Clean residual min=-0.006675 max=0.006994 Jy/beam ! Clean residual mean=-0.000017 rms=0.001640 Jy/beam ! Combined flux in latest and established models = 0.159016 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 148 components and 0.159016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255796Jy sigma=0.001453 ! Fit after self-cal, rms=0.255795Jy sigma=0.001453 wmodel J0144-3938_X_2002_05_14_yyk\_map.mod ! Writing 148 model components to file: J0144-3938_X_2002_05_14_yyk_map.mod wobs J0144-3938_X_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0144-3938_X_2002_05_14_yyk_uvs.fits wwins J0144-3938_X_2002_05_14_yyk\_map.win ! wwins: Wrote 2 windows to J0144-3938_X_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0004094 Jy ! Component: 100 - total flux cleaned = 0.00013625 Jy ! Component: 150 - total flux cleaned = -0.000101877 Jy ! Component: 200 - total flux cleaned = -3.36751e-05 Jy ! Component: 250 - total flux cleaned = 0.000152772 Jy ! Component: 300 - total flux cleaned = 0.000550394 Jy ! Component: 350 - total flux cleaned = 0.000551322 Jy ! Component: 400 - total flux cleaned = 0.000394557 Jy ! Component: 450 - total flux cleaned = 0.0003438 Jy ! Component: 500 - total flux cleaned = 0.000194058 Jy ! Component: 550 - total flux cleaned = 9.59106e-05 Jy ! Component: 600 - total flux cleaned = 9.49017e-05 Jy ! Component: 650 - total flux cleaned = 0.000141619 Jy ! Component: 700 - total flux cleaned = 0.000279998 Jy ! Component: 750 - total flux cleaned = 0.000509713 Jy ! Component: 800 - total flux cleaned = 0.000784083 Jy ! Component: 850 - total flux cleaned = 0.00110224 Jy ! Component: 900 - total flux cleaned = 0.00141798 Jy ! Component: 950 - total flux cleaned = 0.00159741 Jy ! Component: 1000 - total flux cleaned = 0.00182074 Jy ! Component: 1050 - total flux cleaned = 0.00204363 Jy ! Component: 1100 - total flux cleaned = 0.00217743 Jy ! Component: 1150 - total flux cleaned = 0.00231056 Jy ! Component: 1200 - total flux cleaned = 0.00235489 Jy ! Component: 1250 - total flux cleaned = 0.00253313 Jy ! Component: 1300 - total flux cleaned = 0.00266675 Jy ! Component: 1350 - total flux cleaned = 0.00271152 Jy ! Component: 1400 - total flux cleaned = 0.0028009 Jy ! Component: 1450 - total flux cleaned = 0.00280109 Jy ! Component: 1500 - total flux cleaned = 0.00284613 Jy ! Component: 1550 - total flux cleaned = 0.00302695 Jy ! Component: 1600 - total flux cleaned = 0.00307228 Jy ! Component: 1650 - total flux cleaned = 0.00316394 Jy ! Component: 1700 - total flux cleaned = 0.00325584 Jy ! Component: 1750 - total flux cleaned = 0.00334758 Jy ! Component: 1800 - total flux cleaned = 0.00344043 Jy ! Component: 1850 - total flux cleaned = 0.00353332 Jy ! Component: 1900 - total flux cleaned = 0.00372117 Jy ! Component: 1950 - total flux cleaned = 0.00376829 Jy ! Component: 2000 - total flux cleaned = 0.00376771 Jy ! Total flux subtracted in 2048 components = 0.00376781 Jy ! Clean residual min=-0.003106 max=0.002634 Jy/beam ! Clean residual mean=0.000031 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.162784 Jy keep ! Adding 107 model components to the UV plane model. ! The established model now contains 255 components and 0.162784 Jy ![Exited script file: muppet] wmap "J0144-3938_X_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9746 x 7.788 at 28.09 degrees (North through East) ! Clean map min=-0.0099887 max=0.072938 Jy/beam ! Writing clean map to FITS file: J0144-3938_X_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0729376 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0010137 device "J0144-3938_X_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0144-3938_X_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.16944 4.16944 8.33888 16.6778 33.3555 66.7111 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.003 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.072 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9746 x 7.788 at 28.09 degrees (North through East) ! Clean map min=-0.0099887 max=0.072938 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0144-3938_X_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0144-3938_X_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0144-3938_X_2002_05_14_yyk_uvs.log closed on Tue Jun 26 21:58:31 2007