! Started logfile: J0144-3938_S_2002_05_14_yyk_uvs.log on Tue Jun 26 21:58:07 2007
obs J0144-3938_S_2002_05_14_yyk_uva.fits
! Reading UV FITS file: J0144-3938_S_2002_05_14_yyk_uva.fits
! AN table 1: 38 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.304094 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0144-3938
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22947e+09        8e+06          1        8e+06
!  02        2  2.25947e+09        8e+06          1        8e+06
!  03        3  2.34947e+09        8e+06          1        8e+06
!  04        4  2.36947e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1153 lines of history.
! 
! Reading 2080 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0144-3938_S_2002_05_14_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.321888 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.247 mas, bmaj=24.09 mas, bpa=28.47 degrees
! Estimated noise=4984.92 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0637474 Jy
! Component: 100  -  total flux cleaned = 0.0737376 Jy
! Total flux subtracted in 100 components = 0.0737376 Jy
! Clean residual min=-0.011614 max=0.011753 Jy/beam
! Clean residual mean=0.000285 rms=0.005684 Jy/beam
! Combined flux in latest and established models = 0.0737376 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 54 model components to the UV plane model.
! The established model now contains 54 components and 0.0737376 Jy
! 
! Correcting IF 1.
!  A total of 169 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 169 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 169 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 169 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.313630Jy  sigma=0.001515
! Fit after  self-cal, rms=0.311363Jy  sigma=0.001506
! Inverting map and beam 
! Estimated beam: bmin=3.247 mas, bmaj=24.09 mas, bpa=28.47 degrees
! Estimated noise=5003.57 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.689 mas, bmaj=29.1 mas, bpa=28.04 degrees
! Estimated noise=2924.99 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0128878 Jy
! Component: 100  -  total flux cleaned = 0.017922 Jy
! Component: 150  -  total flux cleaned = 0.0197295 Jy
! Component: 200  -  total flux cleaned = 0.0209167 Jy
! Total flux subtracted in 200 components = 0.0209167 Jy
! Clean residual min=-0.003389 max=0.003433 Jy/beam
! Clean residual mean=0.000074 rms=0.001527 Jy/beam
! Combined flux in latest and established models = 0.0946544 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 65 model components to the UV plane model.
! The established model now contains 119 components and 0.0946543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.310540Jy  sigma=0.001501
! Fit after  self-cal, rms=0.310484Jy  sigma=0.001501
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.689 x 29.1 at 28.04 degrees (North through East)
! Clean map  min=-0.0074871  max=0.047703 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    MK        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    MK        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    MK        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    MK        1.00*    
! 
! 
! Fit before self-cal, rms=0.310484Jy  sigma=0.001501
! Fit after  self-cal, rms=0.309828Jy  sigma=0.001498
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.309828Jy  sigma=0.001498
! Fit after  self-cal, rms=0.309811Jy  sigma=0.001498
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.697 mas, bmaj=29.14 mas, bpa=28.01 degrees
! Estimated noise=2931.53 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00158037 Jy
! Component: 100  -  total flux cleaned = 0.00119277 Jy
! Component: 150  -  total flux cleaned = 0.000803404 Jy
! Component: 200  -  total flux cleaned = 0.000598879 Jy
! Total flux subtracted in 200 components = 0.000598879 Jy
! Clean residual min=-0.002599 max=0.002467 Jy/beam
! Clean residual mean=0.000044 rms=0.000932 Jy/beam
! Combined flux in latest and established models = 0.0952532 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 43 model components to the UV plane model.
! The established model now contains 161 components and 0.0952532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.309611Jy  sigma=0.001497
! Fit after  self-cal, rms=0.309593Jy  sigma=0.001497
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.309593Jy  sigma=0.001497
! Fit after  self-cal, rms=0.307696Jy  sigma=0.001485
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0029263 Jy
! Component: 100  -  total flux cleaned = 0.00198044 Jy
! Component: 150  -  total flux cleaned = 0.00461534 Jy
! Component: 200  -  total flux cleaned = 0.00580704 Jy
! Total flux subtracted in 200 components = 0.00580704 Jy
! Clean residual min=-0.004895 max=0.005168 Jy/beam
! Clean residual mean=0.000000 rms=0.001747 Jy/beam
! Combined flux in latest and established models = 0.10106 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 42 model components to the UV plane model.
! The established model now contains 202 components and 0.10106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.307094Jy  sigma=0.001480
! Fit after  self-cal, rms=0.306133Jy  sigma=0.001475
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.697 x 29.14 at 28.01 degrees (North through East)
! Clean map  min=-0.012464  max=0.049706 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.31 mas, bmaj=42.81 mas, bpa=15.37 degrees
! Estimated noise=3463.96 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0015195 Jy
! Component: 100  -  total flux cleaned = -0.0017393 Jy
! Component: 150  -  total flux cleaned = -0.00269744 Jy
! Component: 200  -  total flux cleaned = -0.00375087 Jy
! Total flux subtracted in 200 components = -0.00375087 Jy
! Clean residual min=-0.001338 max=0.001345 Jy/beam
! Clean residual mean=-0.000083 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.0973094 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 39 model components to the UV plane model.
! The established model now contains 241 components and 0.0973094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.305892Jy  sigma=0.001474
! Fit after  self-cal, rms=0.305555Jy  sigma=0.001472
! Inverting map 
! Added new window around map position (20.5, -61).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000147703 Jy
! Component: 100  -  total flux cleaned = 7.58698e-05 Jy
! Component: 150  -  total flux cleaned = -0.00014036 Jy
! Component: 200  -  total flux cleaned = -0.000274285 Jy
! Total flux subtracted in 200 components = -0.000274285 Jy
! Clean residual min=-0.001539 max=0.001470 Jy/beam
! Clean residual mean=-0.000112 rms=0.000502 Jy/beam
! Combined flux in latest and established models = 0.0970351 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 270 components and 0.0970351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.305489Jy  sigma=0.001471
! Fit after  self-cal, rms=0.305323Jy  sigma=0.001470
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.248 mas, bmaj=24.08 mas, bpa=28.47 degrees
! Estimated noise=5015.98 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0882265 Jy
! Component: 100  -  total flux cleaned = 0.107872 Jy
! Component: 150  -  total flux cleaned = 0.112128 Jy
! Component: 200  -  total flux cleaned = 0.115406 Jy
! Total flux subtracted in 200 components = 0.115406 Jy
! Clean residual min=-0.010779 max=0.008897 Jy/beam
! Clean residual mean=-0.000057 rms=0.002826 Jy/beam
! Combined flux in latest and established models = 0.115406 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 65 model components to the UV plane model.
! The established model now contains 65 components and 0.115406 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.697 mas, bmaj=29.14 mas, bpa=28.01 degrees
! Estimated noise=2931.53 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000522814 Jy
! Component: 100  -  total flux cleaned = -0.00384589 Jy
! Component: 150  -  total flux cleaned = -0.00529469 Jy
! Component: 200  -  total flux cleaned = -0.0065909 Jy
! Total flux subtracted in 200 components = -0.0065909 Jy
! Clean residual min=-0.009775 max=0.012056 Jy/beam
! Clean residual mean=0.000007 rms=0.002717 Jy/beam
! Combined flux in latest and established models = 0.108815 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 96 components and 0.108815 Jy
! Inverting map 
! Added new window around map position (-52, -56).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00156532 Jy
! Component: 100  -  total flux cleaned = 5.528e-05 Jy
! Component: 150  -  total flux cleaned = 0.00051294 Jy
! Component: 200  -  total flux cleaned = 0.00111164 Jy
! Total flux subtracted in 200 components = 0.00111164 Jy
! Clean residual min=-0.005072 max=0.004554 Jy/beam
! Clean residual mean=-0.000075 rms=0.001301 Jy/beam
! Combined flux in latest and established models = 0.109926 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 128 components and 0.109926 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.31 mas, bmaj=42.81 mas, bpa=15.37 degrees
! Estimated noise=3463.96 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102255 Jy
! Component: 100  -  total flux cleaned = 0.00140343 Jy
! Component: 150  -  total flux cleaned = 0.00156667 Jy
! Component: 200  -  total flux cleaned = 0.00156701 Jy
! Total flux subtracted in 200 components = 0.00156701 Jy
! Clean residual min=-0.002305 max=0.001944 Jy/beam
! Clean residual mean=-0.000117 rms=0.000658 Jy/beam
! Combined flux in latest and established models = 0.111493 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 170 components and 0.111493 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.697 mas, bmaj=29.14 mas, bpa=28.01 degrees
! Estimated noise=2931.53 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00208856 Jy
! Component: 100  -  total flux cleaned = -0.00264224 Jy
! Component: 150  -  total flux cleaned = -0.00403908 Jy
! Component: 200  -  total flux cleaned = -0.00427763 Jy
! Total flux subtracted in 200 components = -0.00427763 Jy
! Clean residual min=-0.003143 max=0.003936 Jy/beam
! Clean residual mean=-0.000050 rms=0.000905 Jy/beam
! Combined flux in latest and established models = 0.107216 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 193 components and 0.107216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.305294Jy  sigma=0.001470
! Fit after  self-cal, rms=0.305105Jy  sigma=0.001469
wmodel J0144-3938_S_2002_05_14_yyk\_map.mod
! Writing 193 model components to file: J0144-3938_S_2002_05_14_yyk_map.mod
wobs J0144-3938_S_2002_05_14_yyk\_uvs.fits
! Writing UV FITS file: J0144-3938_S_2002_05_14_yyk_uvs.fits
wwins J0144-3938_S_2002_05_14_yyk\_map.win
! wwins: Wrote 2 windows to J0144-3938_S_2002_05_14_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000662828 Jy
! Component: 100  -  total flux cleaned = -0.000610286 Jy
! Component: 150  -  total flux cleaned = -0.000560531 Jy
! Component: 200  -  total flux cleaned = -0.000659945 Jy
! Component: 250  -  total flux cleaned = -0.000761246 Jy
! Component: 300  -  total flux cleaned = -0.000915307 Jy
! Component: 350  -  total flux cleaned = -0.00107319 Jy
! Component: 400  -  total flux cleaned = -0.00128816 Jy
! Component: 450  -  total flux cleaned = -0.00145312 Jy
! Component: 500  -  total flux cleaned = -0.00167698 Jy
! Component: 550  -  total flux cleaned = -0.00190705 Jy
! Component: 600  -  total flux cleaned = -0.00214264 Jy
! Component: 650  -  total flux cleaned = -0.00232288 Jy
! Component: 700  -  total flux cleaned = -0.00250757 Jy
! Component: 750  -  total flux cleaned = -0.00263424 Jy
! Component: 800  -  total flux cleaned = -0.00270001 Jy
! Component: 850  -  total flux cleaned = -0.0028358 Jy
! Component: 900  -  total flux cleaned = -0.00297721 Jy
! Component: 950  -  total flux cleaned = -0.00320023 Jy
! Component: 1000  -  total flux cleaned = -0.0032789 Jy
! Component: 1050  -  total flux cleaned = -0.00344188 Jy
! Component: 1100  -  total flux cleaned = -0.00361457 Jy
! Component: 1150  -  total flux cleaned = -0.00379641 Jy
! Component: 1200  -  total flux cleaned = -0.00399068 Jy
! Component: 1250  -  total flux cleaned = -0.00430399 Jy
! Component: 1300  -  total flux cleaned = -0.0045304 Jy
! Component: 1350  -  total flux cleaned = -0.00477023 Jy
! Component: 1400  -  total flux cleaned = -0.00502401 Jy
! Component: 1450  -  total flux cleaned = -0.00529221 Jy
! Component: 1500  -  total flux cleaned = -0.00557696 Jy
! Component: 1550  -  total flux cleaned = -0.00587824 Jy
! Component: 1600  -  total flux cleaned = -0.00619948 Jy
! Component: 1650  -  total flux cleaned = -0.00653524 Jy
! Component: 1700  -  total flux cleaned = -0.00689361 Jy
! Component: 1750  -  total flux cleaned = -0.00727506 Jy
! Component: 1800  -  total flux cleaned = -0.00767834 Jy
! Component: 1850  -  total flux cleaned = -0.00810855 Jy
! Component: 1900  -  total flux cleaned = -0.00879733 Jy
! Component: 1950  -  total flux cleaned = -0.00929176 Jy
! Component: 2000  -  total flux cleaned = -0.00981438 Jy
! Total flux subtracted in 2048 components = -0.0103723 Jy
! Clean residual min=-0.016652 max=0.014210 Jy/beam
! Clean residual mean=0.000522 rms=0.004066 Jy/beam
! Combined flux in latest and established models = 0.0968434 Jy
keep
! Adding 49 model components to the UV plane model.
! The established model now contains 242 components and 0.0968434 Jy
![Exited script file: muppet]
wmap "J0144-3938_S_2002_05_14_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.697 x 29.14 at 28.01 degrees (North through East)
! Clean map  min=-0.028208  max=0.077851 Jy/beam
! Writing clean map to FITS file: J0144-3938_S_2002_05_14_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0778506 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00441875 
device "J0144-3938_S_2002_05_14_yyk\_map.eps/VPS"
! Attempting to open device: 'J0144-3938_S_2002_05_14_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -17.0278 17.0278 34.0556 68.1112
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0132 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.077 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.697 x 29.14 at 28.01 degrees (North through East)
! Clean map  min=-0.028208  max=0.077851 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0144-3938_S_2002_05_14_yyk\_map.gif/gif"
! Attempting to open device: 'J0144-3938_S_2002_05_14_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0144-3938_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 21:58:15 2007