! Started logfile: J0134-3843_X_2002_05_14_yyk_uvs.log on Tue Jun 26 21:57:08 2007 obs J0134-3843_X_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0134-3843_X_2002_05_14_yyk_uva.fits ! AN table 1: 37 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.438438 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0134-3843 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1076 lines of history. ! ! Reading 2920 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0134-3843_X_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.319925 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8058 mas, bmaj=5.296 mas, bpa=17.06 degrees ! Estimated noise=4741.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.184029 Jy ! Component: 100 - total flux cleaned = 0.234479 Jy ! Total flux subtracted in 100 components = 0.234479 Jy ! Clean residual min=-0.025749 max=0.028622 Jy/beam ! Clean residual mean=-0.000090 rms=0.008555 Jy/beam ! Combined flux in latest and established models = 0.234479 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.234479 Jy ! ! Correcting IF 1. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.252643Jy sigma=0.001342 ! Fit after self-cal, rms=0.252365Jy sigma=0.001340 ! Inverting map and beam ! Estimated beam: bmin=0.8058 mas, bmaj=5.296 mas, bpa=17.06 degrees ! Estimated noise=4741.32 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9696 mas, bmaj=6.059 mas, bpa=17.27 degrees ! Estimated noise=2097.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0321225 Jy ! Component: 100 - total flux cleaned = 0.0480351 Jy ! Component: 150 - total flux cleaned = 0.0518984 Jy ! Component: 200 - total flux cleaned = 0.0536058 Jy ! Total flux subtracted in 200 components = 0.0536058 Jy ! Clean residual min=-0.021171 max=0.029881 Jy/beam ! Clean residual mean=-0.000199 rms=0.007047 Jy/beam ! Combined flux in latest and established models = 0.288085 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 61 components and 0.288085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250591Jy sigma=0.001317 ! Fit after self-cal, rms=0.250464Jy sigma=0.001317 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9696 x 6.059 at 17.27 degrees (North through East) ! Clean map min=-0.02096 max=0.11057 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00854 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 0.87 KP 1.00* ! LA 0.94 NL 1.08 OV 1.05 PT 1.02 ! SC 1.04 MK 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* MK 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.998435 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 1.00* KP 1.00* ! LA 1.00 NL 1.03 OV 0.99 PT 1.14 ! SC 1.01 MK 1.00* ! ! ! Fit before self-cal, rms=0.250464Jy sigma=0.001317 ! Fit after self-cal, rms=0.247562Jy sigma=0.001313 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247562Jy sigma=0.001313 ! Fit after self-cal, rms=0.247572Jy sigma=0.001313 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9809 mas, bmaj=6.104 mas, bpa=17.15 degrees ! Estimated noise=2091.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00146219 Jy ! Component: 100 - total flux cleaned = -0.000862778 Jy ! Component: 150 - total flux cleaned = -0.00102105 Jy ! Component: 200 - total flux cleaned = -0.000882992 Jy ! Total flux subtracted in 200 components = -0.000882992 Jy ! Clean residual min=-0.017156 max=0.028177 Jy/beam ! Clean residual mean=-0.000318 rms=0.006168 Jy/beam ! Combined flux in latest and established models = 0.287202 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 74 components and 0.287202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247485Jy sigma=0.001311 ! Fit after self-cal, rms=0.247464Jy sigma=0.001311 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247464Jy sigma=0.001311 ! Fit after self-cal, rms=0.244477Jy sigma=0.001290 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128176 Jy ! Component: 100 - total flux cleaned = 0.00155592 Jy ! Component: 150 - total flux cleaned = 0.00144208 Jy ! Component: 200 - total flux cleaned = 0.00143903 Jy ! Total flux subtracted in 200 components = 0.00143903 Jy ! Clean residual min=-0.016180 max=0.027020 Jy/beam ! Clean residual mean=-0.000337 rms=0.006034 Jy/beam ! Combined flux in latest and established models = 0.288641 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 87 components and 0.288641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244398Jy sigma=0.001290 ! Fit after self-cal, rms=0.244208Jy sigma=0.001287 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9809 x 6.104 at 17.15 degrees (North through East) ! Clean map min=-0.015541 max=0.11476 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244208Jy sigma=0.001287 ! Fit after self-cal, rms=0.244057Jy sigma=0.001287 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244057Jy sigma=0.001287 ! Fit after self-cal, rms=0.243802Jy sigma=0.001286 ! Inverting map and beam ! Estimated beam: bmin=0.9817 mas, bmaj=6.092 mas, bpa=17.15 degrees ! Estimated noise=2091.86 mJy/beam. ! Added new window around map position (3.8, -8.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274049 Jy ! Component: 100 - total flux cleaned = 0.0325188 Jy ! Component: 150 - total flux cleaned = 0.0351702 Jy ! Component: 200 - total flux cleaned = 0.0359552 Jy ! Total flux subtracted in 200 components = 0.0359552 Jy ! Clean residual min=-0.010769 max=0.012663 Jy/beam ! Clean residual mean=0.000064 rms=0.003338 Jy/beam ! Combined flux in latest and established models = 0.324596 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 123 components and 0.324596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241603Jy sigma=0.001268 ! Fit after self-cal, rms=0.241293Jy sigma=0.001267 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241293Jy sigma=0.001267 ! Fit after self-cal, rms=0.250283Jy sigma=0.001266 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250283Jy sigma=0.001266 ! Fit after self-cal, rms=0.250229Jy sigma=0.001266 ! Inverting map and beam ! Estimated beam: bmin=0.9941 mas, bmaj=6.133 mas, bpa=17.05 degrees ! Estimated noise=2082.73 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.004875 Jy ! Component: 100 - total flux cleaned = 0.00526974 Jy ! Component: 150 - total flux cleaned = 0.00560624 Jy ! Component: 200 - total flux cleaned = 0.00575856 Jy ! Total flux subtracted in 200 components = 0.00575856 Jy ! Clean residual min=-0.009886 max=0.010513 Jy/beam ! Clean residual mean=0.000054 rms=0.002829 Jy/beam ! Combined flux in latest and established models = 0.330355 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 146 components and 0.330355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249926Jy sigma=0.001264 ! Fit after self-cal, rms=0.249841Jy sigma=0.001263 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.339 mas, bmaj=9.951 mas, bpa=4.16 degrees ! Estimated noise=2507 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146908 Jy ! Component: 100 - total flux cleaned = 0.000752139 Jy ! Component: 150 - total flux cleaned = 0.000113841 Jy ! Component: 200 - total flux cleaned = -0.000230458 Jy ! Total flux subtracted in 200 components = -0.000230458 Jy ! Clean residual min=-0.007881 max=0.009518 Jy/beam ! Clean residual mean=0.000091 rms=0.003250 Jy/beam ! Combined flux in latest and established models = 0.330125 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 158 components and 0.330125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249719Jy sigma=0.001262 ! Fit after self-cal, rms=0.249631Jy sigma=0.001261 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8119 mas, bmaj=5.324 mas, bpa=16.99 degrees ! Estimated noise=4712.85 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.18651 Jy ! Component: 100 - total flux cleaned = 0.240347 Jy ! Component: 150 - total flux cleaned = 0.262492 Jy ! Component: 200 - total flux cleaned = 0.274419 Jy ! Total flux subtracted in 200 components = 0.274419 Jy ! Clean residual min=-0.019363 max=0.018327 Jy/beam ! Clean residual mean=-0.000118 rms=0.005693 Jy/beam ! Combined flux in latest and established models = 0.274419 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.274419 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9941 mas, bmaj=6.133 mas, bpa=17.05 degrees ! Estimated noise=2082.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0228359 Jy ! Component: 100 - total flux cleaned = 0.0361875 Jy ! Component: 150 - total flux cleaned = 0.0418058 Jy ! Component: 200 - total flux cleaned = 0.0443551 Jy ! Total flux subtracted in 200 components = 0.0443552 Jy ! Clean residual min=-0.009942 max=0.009713 Jy/beam ! Clean residual mean=-0.000019 rms=0.003132 Jy/beam ! Combined flux in latest and established models = 0.318774 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 102 components and 0.318774 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.339 mas, bmaj=9.951 mas, bpa=4.16 degrees ! Estimated noise=2507 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0055124 Jy ! Component: 100 - total flux cleaned = 0.00685468 Jy ! Component: 150 - total flux cleaned = 0.00702973 Jy ! Component: 200 - total flux cleaned = 0.00757407 Jy ! Total flux subtracted in 200 components = 0.00757407 Jy ! Clean residual min=-0.008007 max=0.007989 Jy/beam ! Clean residual mean=0.000040 rms=0.003051 Jy/beam ! Combined flux in latest and established models = 0.326348 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 133 components and 0.326348 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9941 mas, bmaj=6.133 mas, bpa=17.05 degrees ! Estimated noise=2082.73 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000356349 Jy ! Component: 100 - total flux cleaned = -0.000166499 Jy ! Component: 150 - total flux cleaned = 0.000121882 Jy ! Component: 200 - total flux cleaned = 0.000907249 Jy ! Total flux subtracted in 200 components = 0.000907249 Jy ! Clean residual min=-0.008236 max=0.008692 Jy/beam ! Clean residual mean=0.000016 rms=0.002482 Jy/beam ! Combined flux in latest and established models = 0.327255 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 150 components and 0.327255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249365Jy sigma=0.001260 ! Fit after self-cal, rms=0.249095Jy sigma=0.001259 wmodel J0134-3843_X_2002_05_14_yyk\_map.mod ! Writing 150 model components to file: J0134-3843_X_2002_05_14_yyk_map.mod wobs J0134-3843_X_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0134-3843_X_2002_05_14_yyk_uvs.fits wwins J0134-3843_X_2002_05_14_yyk\_map.win ! wwins: Wrote 2 windows to J0134-3843_X_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0016901 Jy ! Component: 100 - total flux cleaned = -0.00325267 Jy ! Component: 150 - total flux cleaned = -0.00405799 Jy ! Component: 200 - total flux cleaned = -0.00498332 Jy ! Component: 250 - total flux cleaned = -0.00576073 Jy ! Component: 300 - total flux cleaned = -0.00630232 Jy ! Component: 350 - total flux cleaned = -0.00664292 Jy ! Component: 400 - total flux cleaned = -0.00704225 Jy ! Component: 450 - total flux cleaned = -0.00749366 Jy ! Component: 500 - total flux cleaned = -0.00749108 Jy ! Component: 550 - total flux cleaned = -0.00762507 Jy ! Component: 600 - total flux cleaned = -0.00742957 Jy ! Component: 650 - total flux cleaned = -0.00730531 Jy ! Component: 700 - total flux cleaned = -0.00700129 Jy ! Component: 750 - total flux cleaned = -0.00658666 Jy ! Component: 800 - total flux cleaned = -0.00612894 Jy ! Component: 850 - total flux cleaned = -0.0057958 Jy ! Component: 900 - total flux cleaned = -0.0054147 Jy ! Component: 950 - total flux cleaned = -0.00493615 Jy ! Component: 1000 - total flux cleaned = -0.00467632 Jy ! Component: 1050 - total flux cleaned = -0.00421751 Jy ! Component: 1100 - total flux cleaned = -0.00381609 Jy ! Component: 1150 - total flux cleaned = -0.00351965 Jy ! Component: 1200 - total flux cleaned = -0.00313093 Jy ! Component: 1250 - total flux cleaned = -0.00274814 Jy ! Component: 1300 - total flux cleaned = -0.00241737 Jy ! Component: 1350 - total flux cleaned = -0.00195103 Jy ! Component: 1400 - total flux cleaned = -0.0016755 Jy ! Component: 1450 - total flux cleaned = -0.0013573 Jy ! Component: 1500 - total flux cleaned = -0.000953869 Jy ! Component: 1550 - total flux cleaned = -0.00064398 Jy ! Component: 1600 - total flux cleaned = -0.000468354 Jy ! Component: 1650 - total flux cleaned = -0.00033835 Jy ! Component: 1700 - total flux cleaned = -0.000209832 Jy ! Component: 1750 - total flux cleaned = 3.38586e-06 Jy ! Component: 1800 - total flux cleaned = 0.000130049 Jy ! Component: 1850 - total flux cleaned = 0.000256057 Jy ! Component: 1900 - total flux cleaned = 0.000339457 Jy ! Component: 1950 - total flux cleaned = 0.000422526 Jy ! Component: 2000 - total flux cleaned = 0.000587923 Jy ! Total flux subtracted in 2048 components = 0.000629369 Jy ! Clean residual min=-0.002239 max=0.003317 Jy/beam ! Clean residual mean=0.000044 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.327885 Jy keep ! Adding 109 model components to the UV plane model. ! The established model now contains 259 components and 0.327885 Jy ![Exited script file: muppet] wmap "J0134-3843_X_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9941 x 6.133 at 17.05 degrees (North through East) ! Clean map min=-0.0096172 max=0.11104 Jy/beam ! Writing clean map to FITS file: J0134-3843_X_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.111036 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000826995 device "J0134-3843_X_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0134-3843_X_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.2344 2.2344 4.46879 8.93759 17.8752 35.7503 71.5007 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.111 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9941 x 6.133 at 17.05 degrees (North through East) ! Clean map min=-0.0096172 max=0.11104 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0134-3843_X_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0134-3843_X_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0134-3843_X_2002_05_14_yyk_uvs.log closed on Tue Jun 26 21:57:15 2007