! Started logfile: J0134-093A_S_2002_05_14_yyk_uvs.log on Tue Jun 26 21:56:34 2007
obs J0134-093A_S_2002_05_14_yyk_uva.fits
! Reading UV FITS file: J0134-093A_S_2002_05_14_yyk_uva.fits
! AN table 1: 85 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.494902 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0134-093A
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22947e+09        8e+06          1        8e+06
!  02        2  2.25947e+09        8e+06          1        8e+06
!  03        3  2.34947e+09        8e+06          1        8e+06
!  04        4  2.36947e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1154 lines of history.
! 
! Reading 7572 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0134-093A_S_2002_05_14_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.285656 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.213 mas, bmaj=10.93 mas, bpa=21.57 degrees
! Estimated noise=1475.77 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.104325 Jy
! Component: 100  -  total flux cleaned = 0.14876 Jy
! Total flux subtracted in 100 components = 0.14876 Jy
! Clean residual min=-0.028527 max=0.038114 Jy/beam
! Clean residual mean=0.003090 rms=0.010731 Jy/beam
! Combined flux in latest and established models = 0.14876 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.14876 Jy
! 
! Correcting IF 1.
!  A total of 272 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 272 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 281 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 272 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.251356Jy  sigma=0.001718
! Fit after  self-cal, rms=0.250349Jy  sigma=0.001711
! Inverting map and beam 
! Estimated beam: bmin=3.213 mas, bmaj=10.93 mas, bpa=21.57 degrees
! Estimated noise=1477.47 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.124 mas, bmaj=11.87 mas, bpa=18.84 degrees
! Estimated noise=1156.85 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0574398 Jy
! Component: 100  -  total flux cleaned = 0.0885257 Jy
! Component: 150  -  total flux cleaned = 0.108941 Jy
! Component: 200  -  total flux cleaned = 0.122987 Jy
! Total flux subtracted in 200 components = 0.122987 Jy
! Clean residual min=-0.029344 max=0.046938 Jy/beam
! Clean residual mean=0.003276 rms=0.013902 Jy/beam
! Combined flux in latest and established models = 0.271747 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 48 model components to the UV plane model.
! The established model now contains 70 components and 0.271747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.243038Jy  sigma=0.001637
! Fit after  self-cal, rms=0.242852Jy  sigma=0.001634
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.124 x 11.87 at 18.84 degrees (North through East)
! Clean map  min=-0.031482  max=0.12242 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    MK        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    MK        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    MK        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    MK        1.00*    
! 
! 
! Fit before self-cal, rms=0.242852Jy  sigma=0.001634
! Fit after  self-cal, rms=0.242605Jy  sigma=0.001635
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.242605Jy  sigma=0.001635
! Fit after  self-cal, rms=0.242592Jy  sigma=0.001635
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.125 mas, bmaj=11.9 mas, bpa=18.74 degrees
! Estimated noise=1158.35 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.01291 Jy
! Component: 100  -  total flux cleaned = 0.0175498 Jy
! Component: 150  -  total flux cleaned = 0.0205187 Jy
! Component: 200  -  total flux cleaned = 0.0226409 Jy
! Total flux subtracted in 200 components = 0.0226409 Jy
! Clean residual min=-0.030522 max=0.045077 Jy/beam
! Clean residual mean=0.003060 rms=0.013476 Jy/beam
! Combined flux in latest and established models = 0.294388 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 82 components and 0.294388 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.242237Jy  sigma=0.001630
! Fit after  self-cal, rms=0.242150Jy  sigma=0.001629
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.242150Jy  sigma=0.001629
! Fit after  self-cal, rms=0.239891Jy  sigma=0.001614
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00787133 Jy
! Component: 100  -  total flux cleaned = 0.010329 Jy
! Component: 150  -  total flux cleaned = 0.0117927 Jy
! Component: 200  -  total flux cleaned = 0.0131426 Jy
! Total flux subtracted in 200 components = 0.0131426 Jy
! Clean residual min=-0.029509 max=0.043825 Jy/beam
! Clean residual mean=0.002933 rms=0.012959 Jy/beam
! Combined flux in latest and established models = 0.30753 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 89 components and 0.30753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.239680Jy  sigma=0.001611
! Fit after  self-cal, rms=0.239155Jy  sigma=0.001608
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.125 x 11.9 at 18.74 degrees (North through East)
! Clean map  min=-0.028587  max=0.11924 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.239155Jy  sigma=0.001608
! Fit after  self-cal, rms=0.239155Jy  sigma=0.001608
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.239155Jy  sigma=0.001608
! Fit after  self-cal, rms=0.238959Jy  sigma=0.001607
! Inverting map and beam 
! Estimated beam: bmin=4.125 mas, bmaj=11.9 mas, bpa=18.74 degrees
! Estimated noise=1158.35 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00310066 Jy
! Component: 100  -  total flux cleaned = 0.00491914 Jy
! Component: 150  -  total flux cleaned = 0.00628405 Jy
! Component: 200  -  total flux cleaned = 0.00770941 Jy
! Total flux subtracted in 200 components = 0.00770941 Jy
! Clean residual min=-0.027624 max=0.042224 Jy/beam
! Clean residual mean=0.002852 rms=0.012604 Jy/beam
! Combined flux in latest and established models = 0.31524 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 94 components and 0.31524 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.238772Jy  sigma=0.001604
! Fit after  self-cal, rms=0.238536Jy  sigma=0.001603
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.238536Jy  sigma=0.001603
! Fit after  self-cal, rms=0.238536Jy  sigma=0.001603
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.238536Jy  sigma=0.001603
! Fit after  self-cal, rms=0.238488Jy  sigma=0.001603
! Inverting map and beam 
! Estimated beam: bmin=4.125 mas, bmaj=11.9 mas, bpa=18.74 degrees
! Estimated noise=1158.35 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150711 Jy
! Component: 100  -  total flux cleaned = 0.00316387 Jy
! Component: 150  -  total flux cleaned = 0.00439331 Jy
! Component: 200  -  total flux cleaned = 0.00512385 Jy
! Total flux subtracted in 200 components = 0.00512385 Jy
! Clean residual min=-0.027247 max=0.041737 Jy/beam
! Clean residual mean=0.002802 rms=0.012429 Jy/beam
! Combined flux in latest and established models = 0.320364 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 100 components and 0.320364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.238331Jy  sigma=0.001601
! Fit after  self-cal, rms=0.238233Jy  sigma=0.001600
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.655 mas, bmaj=15.12 mas, bpa=9.558 degrees
! Estimated noise=1346.09 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0181997 Jy
! Component: 100  -  total flux cleaned = 0.0223513 Jy
! Component: 150  -  total flux cleaned = 0.024719 Jy
! Component: 200  -  total flux cleaned = 0.0268008 Jy
! Total flux subtracted in 200 components = 0.0268008 Jy
! Clean residual min=-0.036919 max=0.056311 Jy/beam
! Clean residual mean=0.004443 rms=0.018029 Jy/beam
! Combined flux in latest and established models = 0.347165 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 117 components and 0.347165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.238884Jy  sigma=0.001602
! Fit after  self-cal, rms=0.238432Jy  sigma=0.001600
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.213 mas, bmaj=10.93 mas, bpa=21.57 degrees
! Estimated noise=1479.17 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.10624 Jy
! Component: 100  -  total flux cleaned = 0.155114 Jy
! Component: 150  -  total flux cleaned = 0.188238 Jy
! Component: 200  -  total flux cleaned = 0.212524 Jy
! Total flux subtracted in 200 components = 0.212524 Jy
! Clean residual min=-0.031227 max=0.040362 Jy/beam
! Clean residual mean=0.002696 rms=0.010322 Jy/beam
! Combined flux in latest and established models = 0.212524 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 41 model components to the UV plane model.
! The established model now contains 41 components and 0.212524 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.125 mas, bmaj=11.9 mas, bpa=18.74 degrees
! Estimated noise=1158.35 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0399397 Jy
! Component: 100  -  total flux cleaned = 0.0639464 Jy
! Component: 150  -  total flux cleaned = 0.0802122 Jy
! Component: 200  -  total flux cleaned = 0.091377 Jy
! Total flux subtracted in 200 components = 0.091377 Jy
! Clean residual min=-0.029310 max=0.040815 Jy/beam
! Clean residual mean=0.002972 rms=0.012711 Jy/beam
! Combined flux in latest and established models = 0.303901 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 67 components and 0.303901 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.655 mas, bmaj=15.12 mas, bpa=9.558 degrees
! Estimated noise=1346.09 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0250018 Jy
! Component: 100  -  total flux cleaned = 0.0375535 Jy
! Component: 150  -  total flux cleaned = 0.0408921 Jy
! Component: 200  -  total flux cleaned = 0.0430603 Jy
! Total flux subtracted in 200 components = 0.0430603 Jy
! Clean residual min=-0.038159 max=0.056244 Jy/beam
! Clean residual mean=0.004456 rms=0.017973 Jy/beam
! Combined flux in latest and established models = 0.346961 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 78 components and 0.346961 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.125 mas, bmaj=11.9 mas, bpa=18.74 degrees
! Estimated noise=1158.35 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0130253 Jy
! Component: 100  -  total flux cleaned = -0.0164093 Jy
! Component: 150  -  total flux cleaned = -0.0184149 Jy
! Component: 200  -  total flux cleaned = -0.0193475 Jy
! Total flux subtracted in 200 components = -0.0193475 Jy
! Clean residual min=-0.027668 max=0.040169 Jy/beam
! Clean residual mean=0.002740 rms=0.012185 Jy/beam
! Combined flux in latest and established models = 0.327614 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 93 components and 0.327614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.238588Jy  sigma=0.001601
! Fit after  self-cal, rms=0.238039Jy  sigma=0.001598
wmodel J0134-093A_S_2002_05_14_yyk\_map.mod
! Writing 93 model components to file: J0134-093A_S_2002_05_14_yyk_map.mod
wobs J0134-093A_S_2002_05_14_yyk\_uvs.fits
! Writing UV FITS file: J0134-093A_S_2002_05_14_yyk_uvs.fits
wwins J0134-093A_S_2002_05_14_yyk\_map.win
! wwins: Wrote 1 windows to J0134-093A_S_2002_05_14_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0180657 Jy
! Component: 100  -  total flux cleaned = 0.0334134 Jy
! Component: 150  -  total flux cleaned = 0.0470743 Jy
! Component: 200  -  total flux cleaned = 0.0594184 Jy
! Component: 250  -  total flux cleaned = 0.0689655 Jy
! Component: 300  -  total flux cleaned = 0.0757339 Jy
! Component: 350  -  total flux cleaned = 0.0820861 Jy
! Component: 400  -  total flux cleaned = 0.0869834 Jy
! Component: 450  -  total flux cleaned = 0.092744 Jy
! Component: 500  -  total flux cleaned = 0.0979022 Jy
! Component: 550  -  total flux cleaned = 0.10285 Jy
! Component: 600  -  total flux cleaned = 0.107904 Jy
! Component: 650  -  total flux cleaned = 0.111842 Jy
! Component: 700  -  total flux cleaned = 0.116209 Jy
! Component: 750  -  total flux cleaned = 0.120123 Jy
! Component: 800  -  total flux cleaned = 0.124704 Jy
! Component: 850  -  total flux cleaned = 0.12705 Jy
! Component: 900  -  total flux cleaned = 0.130573 Jy
! Component: 950  -  total flux cleaned = 0.133738 Jy
! Component: 1000  -  total flux cleaned = 0.136816 Jy
! Component: 1050  -  total flux cleaned = 0.139575 Jy
! Component: 1100  -  total flux cleaned = 0.143152 Jy
! Component: 1150  -  total flux cleaned = 0.146845 Jy
! Component: 1200  -  total flux cleaned = 0.150431 Jy
! Component: 1250  -  total flux cleaned = 0.154335 Jy
! Component: 1300  -  total flux cleaned = 0.157732 Jy
! Component: 1350  -  total flux cleaned = 0.161038 Jy
! Component: 1400  -  total flux cleaned = 0.164634 Jy
! Component: 1450  -  total flux cleaned = 0.167769 Jy
! Component: 1500  -  total flux cleaned = 0.171007 Jy
! Component: 1550  -  total flux cleaned = 0.174344 Jy
! Component: 1600  -  total flux cleaned = 0.177084 Jy
! Component: 1650  -  total flux cleaned = 0.179593 Jy
! Component: 1700  -  total flux cleaned = 0.182048 Jy
! Component: 1750  -  total flux cleaned = 0.184292 Jy
! Component: 1800  -  total flux cleaned = 0.187114 Jy
! Component: 1850  -  total flux cleaned = 0.189108 Jy
! Component: 1900  -  total flux cleaned = 0.191812 Jy
! Component: 1950  -  total flux cleaned = 0.193725 Jy
! Component: 2000  -  total flux cleaned = 0.196031 Jy
! Total flux subtracted in 2048 components = 0.198007 Jy
! Clean residual min=-0.009516 max=0.007841 Jy/beam
! Clean residual mean=0.000723 rms=0.003346 Jy/beam
! Combined flux in latest and established models = 0.525622 Jy
keep
! Adding 261 model components to the UV plane model.
! The established model now contains 354 components and 0.525622 Jy
![Exited script file: muppet]
wmap "J0134-093A_S_2002_05_14_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.125 x 11.9 at 18.74 degrees (North through East)
! Clean map  min=-0.013047  max=0.10391 Jy/beam
! Writing clean map to FITS file: J0134-093A_S_2002_05_14_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.10391 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00332652 
device "J0134-093A_S_2002_05_14_yyk\_map.eps/VPS"
! Attempting to open device: 'J0134-093A_S_2002_05_14_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -9.60406 9.60406 19.2081 38.4162 76.8325
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0099 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.103 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.125 x 11.9 at 18.74 degrees (North through East)
! Clean map  min=-0.013047  max=0.10391 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0134-093A_S_2002_05_14_yyk\_map.gif/gif"
! Attempting to open device: 'J0134-093A_S_2002_05_14_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0134-093A_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 21:56:41 2007