! Started logfile: J0124-3416_S_2002_01_31_yyk_uvs.log on Tue Jun 26 21:56:19 2007 obs J0124-3416_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0124-3416_S_2002_01_31_yyk_uva.fits ! AN table 1: 73 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.865753 visibilities/baseline/integration-bin. ! Found source: J0124-3416 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1224 lines of history. ! ! Reading 11376 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0124-3416_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.269626 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.317 mas, bmaj=6.352 mas, bpa=-4.125 degrees ! Estimated noise=1914.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.120766 Jy ! Component: 100 - total flux cleaned = 0.138419 Jy ! Total flux subtracted in 100 components = 0.138419 Jy ! Clean residual min=-0.011538 max=0.013554 Jy/beam ! Clean residual mean=0.000009 rms=0.002824 Jy/beam ! Combined flux in latest and established models = 0.138419 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.138419 Jy ! ! Correcting IF 1. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.228054Jy sigma=0.001320 ! Fit after self-cal, rms=0.226590Jy sigma=0.001315 ! Inverting map and beam ! Estimated beam: bmin=2.317 mas, bmaj=6.352 mas, bpa=-4.125 degrees ! Estimated noise=1914.01 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=7.95 mas, bpa=-2.439 degrees ! Estimated noise=1094.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 7). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178232 Jy ! Component: 100 - total flux cleaned = 0.0252126 Jy ! Component: 150 - total flux cleaned = 0.0263096 Jy ! Component: 200 - total flux cleaned = 0.0264587 Jy ! Total flux subtracted in 200 components = 0.0264587 Jy ! Clean residual min=-0.006213 max=0.008195 Jy/beam ! Clean residual mean=0.000029 rms=0.001883 Jy/beam ! Combined flux in latest and established models = 0.164878 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 35 components and 0.164878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225686Jy sigma=0.001308 ! Fit after self-cal, rms=0.225591Jy sigma=0.001308 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.068 x 7.95 at -2.439 degrees (North through East) ! Clean map min=-0.0061001 max=0.14014 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.225591Jy sigma=0.001308 ! Fit after self-cal, rms=0.225591Jy sigma=0.001308 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225591Jy sigma=0.001308 ! Fit after self-cal, rms=0.225591Jy sigma=0.001308 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=7.95 mas, bpa=-2.439 degrees ! Estimated noise=1094.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319861 Jy ! Component: 100 - total flux cleaned = 0.00305677 Jy ! Component: 150 - total flux cleaned = 0.00293887 Jy ! Component: 200 - total flux cleaned = 0.00283581 Jy ! Total flux subtracted in 200 components = 0.00283581 Jy ! Clean residual min=-0.006349 max=0.006642 Jy/beam ! Clean residual mean=0.000026 rms=0.001713 Jy/beam ! Combined flux in latest and established models = 0.167713 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 52 components and 0.167713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225439Jy sigma=0.001307 ! Fit after self-cal, rms=0.225422Jy sigma=0.001307 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225422Jy sigma=0.001307 ! Fit after self-cal, rms=0.221863Jy sigma=0.001282 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00470788 Jy ! Component: 100 - total flux cleaned = 0.00517269 Jy ! Component: 150 - total flux cleaned = 0.00504351 Jy ! Component: 200 - total flux cleaned = 0.00493109 Jy ! Total flux subtracted in 200 components = 0.00493109 Jy ! Clean residual min=-0.006413 max=0.005532 Jy/beam ! Clean residual mean=0.000043 rms=0.001637 Jy/beam ! Combined flux in latest and established models = 0.172645 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 69 components and 0.172645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221704Jy sigma=0.001281 ! Fit after self-cal, rms=0.221147Jy sigma=0.001277 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.068 x 7.95 at -2.439 degrees (North through East) ! Clean map min=-0.0065088 max=0.142 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221147Jy sigma=0.001277 ! Fit after self-cal, rms=0.219882Jy sigma=0.001276 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219882Jy sigma=0.001276 ! Fit after self-cal, rms=0.219686Jy sigma=0.001275 ! Inverting map and beam ! Estimated beam: bmin=3.08 mas, bmaj=7.93 mas, bpa=-2.371 degrees ! Estimated noise=1080.06 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000132108 Jy ! Component: 100 - total flux cleaned = -0.000140003 Jy ! Component: 150 - total flux cleaned = -6.15161e-05 Jy ! Component: 200 - total flux cleaned = -5.98292e-05 Jy ! Total flux subtracted in 200 components = -5.98292e-05 Jy ! Clean residual min=-0.006892 max=0.005321 Jy/beam ! Clean residual mean=0.000035 rms=0.001573 Jy/beam ! Combined flux in latest and established models = 0.172585 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 80 components and 0.172585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219611Jy sigma=0.001275 ! Fit after self-cal, rms=0.219539Jy sigma=0.001274 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219539Jy sigma=0.001274 ! Fit after self-cal, rms=0.219332Jy sigma=0.001274 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219332Jy sigma=0.001274 ! Fit after self-cal, rms=0.219319Jy sigma=0.001274 ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=7.931 mas, bpa=-1.881 degrees ! Estimated noise=1070.84 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00158852 Jy ! Component: 100 - total flux cleaned = -0.00165026 Jy ! Component: 150 - total flux cleaned = -0.00164689 Jy ! Component: 200 - total flux cleaned = -0.00159712 Jy ! Total flux subtracted in 200 components = -0.00159712 Jy ! Clean residual min=-0.006694 max=0.005260 Jy/beam ! Clean residual mean=0.000001 rms=0.001521 Jy/beam ! Combined flux in latest and established models = 0.170988 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 95 components and 0.170988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219282Jy sigma=0.001273 ! Fit after self-cal, rms=0.219289Jy sigma=0.001273 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.331 mas, bmaj=23.54 mas, bpa=3.073 degrees ! Estimated noise=1380 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119953 Jy ! Component: 100 - total flux cleaned = 0.00132424 Jy ! Component: 150 - total flux cleaned = 0.00137934 Jy ! Component: 200 - total flux cleaned = 0.00147698 Jy ! Total flux subtracted in 200 components = 0.00147698 Jy ! Clean residual min=-0.005708 max=0.006315 Jy/beam ! Clean residual mean=-0.000011 rms=0.001755 Jy/beam ! Combined flux in latest and established models = 0.172465 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 103 components and 0.172465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219278Jy sigma=0.001273 ! Fit after self-cal, rms=0.219290Jy sigma=0.001274 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.326 mas, bmaj=6.339 mas, bpa=-3.852 degrees ! Estimated noise=1884.36 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.126682 Jy ! Component: 100 - total flux cleaned = 0.150315 Jy ! Component: 150 - total flux cleaned = 0.158002 Jy ! Component: 200 - total flux cleaned = 0.162189 Jy ! Total flux subtracted in 200 components = 0.162189 Jy ! Clean residual min=-0.008818 max=0.010002 Jy/beam ! Clean residual mean=0.000010 rms=0.002211 Jy/beam ! Combined flux in latest and established models = 0.162189 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.162189 Jy ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=7.931 mas, bpa=-1.881 degrees ! Estimated noise=1070.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10, 28). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00942429 Jy ! Component: 100 - total flux cleaned = 0.0108726 Jy ! Component: 150 - total flux cleaned = 0.0119457 Jy ! Component: 200 - total flux cleaned = 0.0121781 Jy ! Total flux subtracted in 200 components = 0.0121781 Jy ! Clean residual min=-0.006326 max=0.005537 Jy/beam ! Clean residual mean=-0.000027 rms=0.001497 Jy/beam ! Combined flux in latest and established models = 0.174368 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 39 components and 0.174368 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.331 mas, bmaj=23.54 mas, bpa=3.073 degrees ! Estimated noise=1380 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103202 Jy ! Component: 100 - total flux cleaned = 0.000800686 Jy ! Component: 150 - total flux cleaned = 0.000738533 Jy ! Component: 200 - total flux cleaned = 0.000681004 Jy ! Total flux subtracted in 200 components = 0.000681004 Jy ! Clean residual min=-0.005164 max=0.006125 Jy/beam ! Clean residual mean=-0.000037 rms=0.001686 Jy/beam ! Combined flux in latest and established models = 0.175049 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.175049 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=7.931 mas, bpa=-1.881 degrees ! Estimated noise=1070.84 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000468066 Jy ! Component: 100 - total flux cleaned = -0.000450277 Jy ! Component: 150 - total flux cleaned = -0.00044635 Jy ! Component: 200 - total flux cleaned = -0.000588863 Jy ! Total flux subtracted in 200 components = -0.000588863 Jy ! Clean residual min=-0.006308 max=0.005257 Jy/beam ! Clean residual mean=-0.000025 rms=0.001455 Jy/beam ! Combined flux in latest and established models = 0.17446 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 75 components and 0.17446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219232Jy sigma=0.001273 ! Fit after self-cal, rms=0.219239Jy sigma=0.001273 wmodel J0124-3416_S_2002_01_31_yyk\_map.mod ! Writing 75 model components to file: J0124-3416_S_2002_01_31_yyk_map.mod wobs J0124-3416_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J0124-3416_S_2002_01_31_yyk_uvs.fits wwins J0124-3416_S_2002_01_31_yyk\_map.win ! wwins: Wrote 3 windows to J0124-3416_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00169352 Jy ! Component: 100 - total flux cleaned = -0.0013184 Jy ! Component: 150 - total flux cleaned = -0.00123096 Jy ! Component: 200 - total flux cleaned = -0.00139611 Jy ! Component: 250 - total flux cleaned = -0.00147584 Jy ! Component: 300 - total flux cleaned = -0.00154852 Jy ! Component: 350 - total flux cleaned = -0.00154625 Jy ! Component: 400 - total flux cleaned = -0.00168443 Jy ! Component: 450 - total flux cleaned = -0.00195249 Jy ! Component: 500 - total flux cleaned = -0.0020818 Jy ! Component: 550 - total flux cleaned = -0.00233346 Jy ! Component: 600 - total flux cleaned = -0.00239423 Jy ! Component: 650 - total flux cleaned = -0.00221356 Jy ! Component: 700 - total flux cleaned = -0.00215371 Jy ! Component: 750 - total flux cleaned = -0.00192402 Jy ! Component: 800 - total flux cleaned = -0.0019226 Jy ! Component: 850 - total flux cleaned = -0.00158991 Jy ! Component: 900 - total flux cleaned = -0.00148043 Jy ! Component: 950 - total flux cleaned = -0.00137336 Jy ! Component: 1000 - total flux cleaned = -0.00111175 Jy ! Component: 1050 - total flux cleaned = -0.000855558 Jy ! Component: 1100 - total flux cleaned = -0.000604726 Jy ! Component: 1150 - total flux cleaned = -0.00035734 Jy ! Component: 1200 - total flux cleaned = -0.00016221 Jy ! Component: 1250 - total flux cleaned = 2.92744e-05 Jy ! Component: 1300 - total flux cleaned = 0.000170969 Jy ! Component: 1350 - total flux cleaned = 0.000310343 Jy ! Component: 1400 - total flux cleaned = 0.00035554 Jy ! Component: 1450 - total flux cleaned = 0.000445453 Jy ! Component: 1500 - total flux cleaned = 0.000534304 Jy ! Component: 1550 - total flux cleaned = 0.000709053 Jy ! Component: 1600 - total flux cleaned = 0.000751676 Jy ! Component: 1650 - total flux cleaned = 0.00079376 Jy ! Component: 1700 - total flux cleaned = 0.00087849 Jy ! Component: 1750 - total flux cleaned = 0.00104528 Jy ! Component: 1800 - total flux cleaned = 0.00116935 Jy ! Component: 1850 - total flux cleaned = 0.00133282 Jy ! Component: 1900 - total flux cleaned = 0.00149379 Jy ! Component: 1950 - total flux cleaned = 0.00161294 Jy ! Component: 2000 - total flux cleaned = 0.001692 Jy ! Total flux subtracted in 2048 components = 0.00184782 Jy ! Clean residual min=-0.002193 max=0.002618 Jy/beam ! Clean residual mean=-0.000036 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.176308 Jy keep ! Adding 123 model components to the UV plane model. ! The established model now contains 198 components and 0.176308 Jy ![Exited script file: muppet] wmap "J0124-3416_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.086 x 7.931 at -1.881 degrees (North through East) ! Clean map min=-0.0051068 max=0.13631 Jy/beam ! Writing clean map to FITS file: J0124-3416_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.136306 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000785953 device "J0124-3416_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0124-3416_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.72982 1.72982 3.45964 6.91929 13.8386 27.6772 55.3543 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.136 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.086 x 7.931 at -1.881 degrees (North through East) ! Clean map min=-0.0051068 max=0.13631 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0124-3416_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0124-3416_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0124-3416_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 21:56:27 2007