! Started logfile: J0051-4226_S_2002_01_31_yyk_uvs.log on Tue Jun 26 21:53:14 2007 obs J0051-4226_S_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0051-4226_S_2002_01_31_yyk_uva.fits ! AN table 1: 34 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.605882 visibilities/baseline/integration-bin. ! Found source: J0051-4226 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1224 lines of history. ! ! Reading 3708 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0051-4226_S_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.760126 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.396 mas, bmaj=6.712 mas, bpa=-2.959 degrees ! Estimated noise=3742 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.604834 Jy ! Component: 100 - total flux cleaned = 0.697857 Jy ! Total flux subtracted in 100 components = 0.697857 Jy ! Clean residual min=-0.042136 max=0.077104 Jy/beam ! Clean residual mean=-0.000004 rms=0.014824 Jy/beam ! Combined flux in latest and established models = 0.697857 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.697857 Jy ! ! Correcting IF 1. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.294277Jy sigma=0.001576 ! Fit after self-cal, rms=0.294127Jy sigma=0.001575 ! Inverting map and beam ! Estimated beam: bmin=2.396 mas, bmaj=6.712 mas, bpa=-2.959 degrees ! Estimated noise=3742 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.822 mas, bmaj=8.048 mas, bpa=-2.309 degrees ! Estimated noise=2084.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0406573 Jy ! Component: 100 - total flux cleaned = 0.0509679 Jy ! Component: 150 - total flux cleaned = 0.0520015 Jy ! Component: 200 - total flux cleaned = 0.052341 Jy ! Total flux subtracted in 200 components = 0.052341 Jy ! Clean residual min=-0.030446 max=0.048496 Jy/beam ! Clean residual mean=0.000311 rms=0.011511 Jy/beam ! Combined flux in latest and established models = 0.750198 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 22 components and 0.750198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292852Jy sigma=0.001551 ! Fit after self-cal, rms=0.292847Jy sigma=0.001551 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.822 x 8.048 at -2.309 degrees (North through East) ! Clean map min=-0.02935 max=0.69445 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.977128 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00* KP 0.96 ! LA 0.96 MK 0.93 NL 1.40 OV 0.95 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.976192 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.00* ! LA 0.96 MK 1.03 NL 1.45 OV 0.96 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.94464 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.00* KP 1.05 ! LA 0.95 MK 1.02 NL 1.59 OV 0.98 ! PT 1.10 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.987666 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 1.00* KP 1.05 ! LA 0.81 MK 1.01 NL 1.62 OV 0.89 ! PT 0.94 SC 0.96 ! ! ! Fit before self-cal, rms=0.292847Jy sigma=0.001551 ! Fit after self-cal, rms=0.275868Jy sigma=0.001395 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.275868Jy sigma=0.001395 ! Fit after self-cal, rms=0.275896Jy sigma=0.001395 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.837 mas, bmaj=8.002 mas, bpa=-1.643 degrees ! Estimated noise=1936.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0344909 Jy ! Component: 100 - total flux cleaned = -0.0395804 Jy ! Component: 150 - total flux cleaned = -0.0396951 Jy ! Component: 200 - total flux cleaned = -0.039876 Jy ! Total flux subtracted in 200 components = -0.039876 Jy ! Clean residual min=-0.005639 max=0.007932 Jy/beam ! Clean residual mean=0.000004 rms=0.001862 Jy/beam ! Combined flux in latest and established models = 0.710322 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.710322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272913Jy sigma=0.001373 ! Fit after self-cal, rms=0.272923Jy sigma=0.001373 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272923Jy sigma=0.001373 ! Fit after self-cal, rms=0.261171Jy sigma=0.001307 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100766 Jy ! Component: 100 - total flux cleaned = 0.000998703 Jy ! Component: 150 - total flux cleaned = 0.000997207 Jy ! Component: 200 - total flux cleaned = 0.000932319 Jy ! Total flux subtracted in 200 components = 0.000932319 Jy ! Clean residual min=-0.005738 max=0.007500 Jy/beam ! Clean residual mean=0.000016 rms=0.001810 Jy/beam ! Combined flux in latest and established models = 0.711254 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 45 components and 0.711255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261113Jy sigma=0.001306 ! Fit after self-cal, rms=0.259472Jy sigma=0.001295 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.837 x 8.002 at -1.643 degrees (North through East) ! Clean map min=-0.0053595 max=0.66269 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.259472Jy sigma=0.001295 ! Fit after self-cal, rms=0.257177Jy sigma=0.001287 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.257177Jy sigma=0.001287 ! Fit after self-cal, rms=0.256987Jy sigma=0.001285 ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=7.984 mas, bpa=-1.626 degrees ! Estimated noise=1931.94 mJy/beam. ! Added new window around map position (52, -10). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00569857 Jy ! Component: 100 - total flux cleaned = 0.00726942 Jy ! Component: 150 - total flux cleaned = 0.00846749 Jy ! Component: 200 - total flux cleaned = 0.00886913 Jy ! Total flux subtracted in 200 components = 0.00886913 Jy ! Clean residual min=-0.005729 max=0.004572 Jy/beam ! Clean residual mean=-0.000117 rms=0.001310 Jy/beam ! Combined flux in latest and established models = 0.720124 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 72 components and 0.720124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256729Jy sigma=0.001283 ! Fit after self-cal, rms=0.256746Jy sigma=0.001283 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256746Jy sigma=0.001283 ! Fit after self-cal, rms=0.256592Jy sigma=0.001276 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256592Jy sigma=0.001276 ! Fit after self-cal, rms=0.256628Jy sigma=0.001276 ! Inverting map and beam ! Estimated beam: bmin=2.831 mas, bmaj=7.993 mas, bpa=-1.613 degrees ! Estimated noise=1932.8 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114184 Jy ! Component: 100 - total flux cleaned = 0.00122485 Jy ! Component: 150 - total flux cleaned = 0.0013802 Jy ! Component: 200 - total flux cleaned = 0.00152584 Jy ! Total flux subtracted in 200 components = 0.00152584 Jy ! Clean residual min=-0.004602 max=0.004790 Jy/beam ! Clean residual mean=-0.000056 rms=0.001251 Jy/beam ! Combined flux in latest and established models = 0.721649 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 83 components and 0.721649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256573Jy sigma=0.001276 ! Fit after self-cal, rms=0.256595Jy sigma=0.001276 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.802 mas, bmaj=32.72 mas, bpa=3.047 degrees ! Estimated noise=2597.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103569 Jy ! Component: 100 - total flux cleaned = 0.00121057 Jy ! Component: 150 - total flux cleaned = 0.00121135 Jy ! Component: 200 - total flux cleaned = 0.0012129 Jy ! Total flux subtracted in 200 components = 0.0012129 Jy ! Clean residual min=-0.004533 max=0.003995 Jy/beam ! Clean residual mean=-0.000110 rms=0.001459 Jy/beam ! Combined flux in latest and established models = 0.722862 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 94 components and 0.722862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256592Jy sigma=0.001276 ! Fit after self-cal, rms=0.256602Jy sigma=0.001276 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.364 mas, bmaj=6.617 mas, bpa=-2.861 degrees ! Estimated noise=3610.49 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.589393 Jy ! Component: 100 - total flux cleaned = 0.678231 Jy ! Component: 150 - total flux cleaned = 0.702607 Jy ! Component: 200 - total flux cleaned = 0.70899 Jy ! Total flux subtracted in 200 components = 0.70899 Jy ! Clean residual min=-0.012959 max=0.012015 Jy/beam ! Clean residual mean=0.000039 rms=0.003717 Jy/beam ! Combined flux in latest and established models = 0.708989 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.708989 Jy ! Inverting map and beam ! Estimated beam: bmin=2.831 mas, bmaj=7.993 mas, bpa=-1.613 degrees ! Estimated noise=1932.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00736069 Jy ! Component: 100 - total flux cleaned = 0.00930413 Jy ! Component: 150 - total flux cleaned = 0.0107153 Jy ! Component: 200 - total flux cleaned = 0.0111241 Jy ! Total flux subtracted in 200 components = 0.0111241 Jy ! Clean residual min=-0.004660 max=0.005344 Jy/beam ! Clean residual mean=-0.000061 rms=0.001404 Jy/beam ! Combined flux in latest and established models = 0.720113 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 44 components and 0.720113 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.802 mas, bmaj=32.72 mas, bpa=3.047 degrees ! Estimated noise=2597.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157765 Jy ! Component: 100 - total flux cleaned = 0.0016903 Jy ! Component: 150 - total flux cleaned = 0.00160687 Jy ! Component: 200 - total flux cleaned = 0.00153061 Jy ! Total flux subtracted in 200 components = 0.00153061 Jy ! Clean residual min=-0.004157 max=0.004302 Jy/beam ! Clean residual mean=-0.000101 rms=0.001505 Jy/beam ! Combined flux in latest and established models = 0.721644 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 48 components and 0.721644 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.831 mas, bmaj=7.993 mas, bpa=-1.613 degrees ! Estimated noise=1932.8 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000806487 Jy ! Component: 100 - total flux cleaned = -0.00104793 Jy ! Component: 150 - total flux cleaned = -0.000978411 Jy ! Component: 200 - total flux cleaned = -0.00091254 Jy ! Total flux subtracted in 200 components = -0.00091254 Jy ! Clean residual min=-0.004220 max=0.005489 Jy/beam ! Clean residual mean=-0.000048 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 0.720732 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.720732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256585Jy sigma=0.001276 ! Fit after self-cal, rms=0.256592Jy sigma=0.001276 wmodel J0051-4226_S_2002_01_31_yyk\_map.mod ! Writing 58 model components to file: J0051-4226_S_2002_01_31_yyk_map.mod wobs J0051-4226_S_2002_01_31_yyk\_uvs.fits ! Writing UV FITS file: J0051-4226_S_2002_01_31_yyk_uvs.fits wwins J0051-4226_S_2002_01_31_yyk\_map.win ! wwins: Wrote 2 windows to J0051-4226_S_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134622 Jy ! Component: 100 - total flux cleaned = 0.00100851 Jy ! Component: 150 - total flux cleaned = 0.000574218 Jy ! Component: 200 - total flux cleaned = 5.16872e-05 Jy ! Component: 250 - total flux cleaned = -0.000334678 Jy ! Component: 300 - total flux cleaned = -0.000754907 Jy ! Component: 350 - total flux cleaned = -0.00115725 Jy ! Component: 400 - total flux cleaned = -0.0013018 Jy ! Component: 450 - total flux cleaned = -0.00148725 Jy ! Component: 500 - total flux cleaned = -0.00166518 Jy ! Component: 550 - total flux cleaned = -0.00174989 Jy ! Component: 600 - total flux cleaned = -0.0018737 Jy ! Component: 650 - total flux cleaned = -0.00175343 Jy ! Component: 700 - total flux cleaned = -0.0016365 Jy ! Component: 750 - total flux cleaned = -0.00152156 Jy ! Component: 800 - total flux cleaned = -0.00144577 Jy ! Component: 850 - total flux cleaned = -0.00133407 Jy ! Component: 900 - total flux cleaned = -0.00115193 Jy ! Component: 950 - total flux cleaned = -0.00100845 Jy ! Component: 1000 - total flux cleaned = -0.000866672 Jy ! Component: 1050 - total flux cleaned = -0.000692133 Jy ! Component: 1100 - total flux cleaned = -0.000589151 Jy ! Component: 1150 - total flux cleaned = -0.000487069 Jy ! Component: 1200 - total flux cleaned = -0.00035226 Jy ! Component: 1250 - total flux cleaned = -0.000252489 Jy ! Component: 1300 - total flux cleaned = -0.000120936 Jy ! Component: 1350 - total flux cleaned = -2.34837e-05 Jy ! Component: 1400 - total flux cleaned = 0.000137291 Jy ! Component: 1450 - total flux cleaned = 0.000264539 Jy ! Component: 1500 - total flux cleaned = 0.000359128 Jy ! Component: 1550 - total flux cleaned = 0.000452687 Jy ! Component: 1600 - total flux cleaned = 0.000576053 Jy ! Component: 1650 - total flux cleaned = 0.000636856 Jy ! Component: 1700 - total flux cleaned = 0.000666967 Jy ! Component: 1750 - total flux cleaned = 0.000817445 Jy ! Component: 1800 - total flux cleaned = 0.000906682 Jy ! Component: 1850 - total flux cleaned = 0.000936134 Jy ! Component: 1900 - total flux cleaned = 0.00102426 Jy ! Component: 1950 - total flux cleaned = 0.00114078 Jy ! Component: 2000 - total flux cleaned = 0.00125632 Jy ! Total flux subtracted in 2048 components = 0.00137098 Jy ! Clean residual min=-0.001923 max=0.002504 Jy/beam ! Clean residual mean=-0.000019 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.722103 Jy keep ! Adding 118 model components to the UV plane model. ! The established model now contains 176 components and 0.722103 Jy ![Exited script file: muppet] wmap "J0051-4226_S_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.831 x 7.993 at -1.613 degrees (North through East) ! Clean map min=-0.0047916 max=0.66952 Jy/beam ! Writing clean map to FITS file: J0051-4226_S_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.66952 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000579792 device "J0051-4226_S_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0051-4226_S_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.259794 0.259794 0.519589 1.03918 2.07836 4.15671 8.31342 16.6268 33.2537 66.5074 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.669 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.831 x 7.993 at -1.613 degrees (North through East) ! Clean map min=-0.0047916 max=0.66952 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0051-4226_S_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0051-4226_S_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0051-4226_S_2002_01_31_yyk_uvs.log closed on Tue Jun 26 21:53:20 2007