! Started logfile: J0026-3512_X_2002_05_14_yyk_uvs.log on Tue Jun 26 21:51:35 2007 obs J0026-3512_X_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0026-3512_X_2002_05_14_yyk_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.50321 visibilities/baseline/integration-bin. ! Found source: J0026-3512 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1077 lines of history. ! ! Reading 4076 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0026-3512_X_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.384545 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8589 mas, bmaj=5.218 mas, bpa=22.22 degrees ! Estimated noise=2163.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.224209 Jy ! Component: 100 - total flux cleaned = 0.288356 Jy ! Total flux subtracted in 100 components = 0.288356 Jy ! Clean residual min=-0.017470 max=0.035132 Jy/beam ! Clean residual mean=-0.000092 rms=0.006556 Jy/beam ! Combined flux in latest and established models = 0.288356 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.288356 Jy ! ! Correcting IF 1. ! A total of 159 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 159 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 159 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 159 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.295073Jy sigma=0.001441 ! Fit after self-cal, rms=0.287950Jy sigma=0.001430 ! Inverting map and beam ! Estimated beam: bmin=0.8589 mas, bmaj=5.219 mas, bpa=22.23 degrees ! Estimated noise=2168.67 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9937 mas, bmaj=6.274 mas, bpa=22.15 degrees ! Estimated noise=1705.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316911 Jy ! Component: 100 - total flux cleaned = 0.0324346 Jy ! Component: 150 - total flux cleaned = 0.0328873 Jy ! Component: 200 - total flux cleaned = 0.0338436 Jy ! Total flux subtracted in 200 components = 0.0338436 Jy ! Clean residual min=-0.012273 max=0.012534 Jy/beam ! Clean residual mean=0.000081 rms=0.003513 Jy/beam ! Combined flux in latest and established models = 0.3222 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 48 model components to the UV plane model. ! The established model now contains 59 components and 0.3222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286456Jy sigma=0.001404 ! Fit after self-cal, rms=0.286447Jy sigma=0.001404 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9937 x 6.274 at 22.15 degrees (North through East) ! Clean map min=-0.013722 max=0.23296 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.846576 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 2.78 KP 1.00* ! LA 1.01 NL 1.02 OV 0.97 PT 0.97 ! SC 1.04 MK 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.876111 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.94 HN 2.51 KP 1.00* ! LA 1.00 NL 0.97 OV 0.97 PT 1.07 ! SC 0.96 MK 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.975397 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.85 HN 1.43 KP 1.00* ! LA 0.98 NL 1.00 OV 0.91 PT 1.03 ! SC 1.07 MK 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.803256 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.90 HN 3.55 KP 1.00* ! LA 0.95 NL 0.97 OV 0.97 PT 1.08 ! SC 1.02 MK 1.00* ! ! ! Fit before self-cal, rms=0.286447Jy sigma=0.001404 ! Fit after self-cal, rms=0.487351Jy sigma=0.001546 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.487351Jy sigma=0.001546 ! Fit after self-cal, rms=0.487360Jy sigma=0.001546 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=6.896 mas, bpa=22.87 degrees ! Estimated noise=1294.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0637097 Jy ! Component: 100 - total flux cleaned = -0.0789577 Jy ! Component: 150 - total flux cleaned = -0.0857333 Jy ! Component: 200 - total flux cleaned = -0.0885911 Jy ! Total flux subtracted in 200 components = -0.0885911 Jy ! Clean residual min=-0.007443 max=0.006979 Jy/beam ! Clean residual mean=-0.000041 rms=0.001978 Jy/beam ! Combined flux in latest and established models = 0.233609 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 48 model components to the UV plane model. ! The established model now contains 97 components and 0.233609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.483986Jy sigma=0.001409 ! Fit after self-cal, rms=0.483984Jy sigma=0.001409 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.483984Jy sigma=0.001409 ! Fit after self-cal, rms=0.479354Jy sigma=0.001342 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000796778 Jy ! Component: 100 - total flux cleaned = 0.000778838 Jy ! Component: 150 - total flux cleaned = 0.00152783 Jy ! Component: 200 - total flux cleaned = 0.00164645 Jy ! Total flux subtracted in 200 components = 0.00164645 Jy ! Clean residual min=-0.007007 max=0.006425 Jy/beam ! Clean residual mean=-0.000047 rms=0.001884 Jy/beam ! Combined flux in latest and established models = 0.235255 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 112 components and 0.235255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.478681Jy sigma=0.001338 ! Fit after self-cal, rms=0.478007Jy sigma=0.001328 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.018 x 6.896 at 22.87 degrees (North through East) ! Clean map min=-0.0092706 max=0.18283 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.478007Jy sigma=0.001328 ! Fit after self-cal, rms=0.326208Jy sigma=0.001302 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.326208Jy sigma=0.001302 ! Fit after self-cal, rms=0.325799Jy sigma=0.001297 ! Inverting map and beam ! Estimated beam: bmin=1.013 mas, bmaj=6.802 mas, bpa=22.79 degrees ! Estimated noise=1269.73 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105587 Jy ! Component: 100 - total flux cleaned = -0.000949449 Jy ! Component: 150 - total flux cleaned = -0.000746628 Jy ! Component: 200 - total flux cleaned = -0.000558132 Jy ! Total flux subtracted in 200 components = -0.000558132 Jy ! Clean residual min=-0.007131 max=0.005599 Jy/beam ! Clean residual mean=-0.000044 rms=0.001642 Jy/beam ! Combined flux in latest and established models = 0.234697 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 119 components and 0.234697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325497Jy sigma=0.001297 ! Fit after self-cal, rms=0.325225Jy sigma=0.001294 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325225Jy sigma=0.001294 ! Fit after self-cal, rms=0.356478Jy sigma=0.001289 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356478Jy sigma=0.001289 ! Fit after self-cal, rms=0.356396Jy sigma=0.001288 ! Inverting map and beam ! Estimated beam: bmin=1.011 mas, bmaj=6.841 mas, bpa=22.83 degrees ! Estimated noise=1270.08 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000490662 Jy ! Component: 100 - total flux cleaned = -0.000492298 Jy ! Component: 150 - total flux cleaned = -0.000220697 Jy ! Component: 200 - total flux cleaned = -5.17168e-05 Jy ! Total flux subtracted in 200 components = -5.17168e-05 Jy ! Clean residual min=-0.007020 max=0.005372 Jy/beam ! Clean residual mean=-0.000043 rms=0.001581 Jy/beam ! Combined flux in latest and established models = 0.234645 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 124 components and 0.234645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356147Jy sigma=0.001287 ! Fit after self-cal, rms=0.356087Jy sigma=0.001287 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.438 mas, bmaj=10.71 mas, bpa=10.31 degrees ! Estimated noise=1488.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203231 Jy ! Component: 100 - total flux cleaned = 0.00223891 Jy ! Component: 150 - total flux cleaned = 0.00229868 Jy ! Component: 200 - total flux cleaned = 0.00239836 Jy ! Total flux subtracted in 200 components = 0.00239836 Jy ! Clean residual min=-0.006744 max=0.004838 Jy/beam ! Clean residual mean=-0.000031 rms=0.001733 Jy/beam ! Combined flux in latest and established models = 0.237043 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 130 components and 0.237043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356019Jy sigma=0.001286 ! Fit after self-cal, rms=0.355989Jy sigma=0.001286 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8535 mas, bmaj=5.639 mas, bpa=22.94 degrees ! Estimated noise=1746.28 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.186323 Jy ! Component: 100 - total flux cleaned = 0.219778 Jy ! Component: 150 - total flux cleaned = 0.22951 Jy ! Component: 200 - total flux cleaned = 0.231725 Jy ! Total flux subtracted in 200 components = 0.231725 Jy ! Clean residual min=-0.008232 max=0.007682 Jy/beam ! Clean residual mean=0.000007 rms=0.002146 Jy/beam ! Combined flux in latest and established models = 0.231725 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.231725 Jy ! Inverting map and beam ! Estimated beam: bmin=1.011 mas, bmaj=6.841 mas, bpa=22.83 degrees ! Estimated noise=1270.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000278511 Jy ! Component: 100 - total flux cleaned = 0.000941371 Jy ! Component: 150 - total flux cleaned = 0.00172034 Jy ! Component: 200 - total flux cleaned = 0.00216227 Jy ! Total flux subtracted in 200 components = 0.00216227 Jy ! Clean residual min=-0.006933 max=0.004986 Jy/beam ! Clean residual mean=-0.000021 rms=0.001557 Jy/beam ! Combined flux in latest and established models = 0.233888 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 55 components and 0.233888 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.438 mas, bmaj=10.71 mas, bpa=10.31 degrees ! Estimated noise=1488.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016791 Jy ! Component: 100 - total flux cleaned = 0.00178682 Jy ! Component: 150 - total flux cleaned = 0.00187879 Jy ! Component: 200 - total flux cleaned = 0.00200453 Jy ! Total flux subtracted in 200 components = 0.00200453 Jy ! Clean residual min=-0.006786 max=0.005086 Jy/beam ! Clean residual mean=-0.000006 rms=0.001791 Jy/beam ! Combined flux in latest and established models = 0.235892 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 73 components and 0.235892 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.011 mas, bmaj=6.841 mas, bpa=22.83 degrees ! Estimated noise=1270.08 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000727725 Jy ! Component: 100 - total flux cleaned = -0.000779165 Jy ! Component: 150 - total flux cleaned = -0.000873541 Jy ! Component: 200 - total flux cleaned = -0.000917204 Jy ! Total flux subtracted in 200 components = -0.000917204 Jy ! Clean residual min=-0.006554 max=0.004625 Jy/beam ! Clean residual mean=-0.000018 rms=0.001491 Jy/beam ! Combined flux in latest and established models = 0.234975 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 87 components and 0.234975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.355243Jy sigma=0.001285 ! Fit after self-cal, rms=0.355004Jy sigma=0.001285 wmodel J0026-3512_X_2002_05_14_yyk\_map.mod ! Writing 87 model components to file: J0026-3512_X_2002_05_14_yyk_map.mod wobs J0026-3512_X_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0026-3512_X_2002_05_14_yyk_uvs.fits wwins J0026-3512_X_2002_05_14_yyk\_map.win ! wwins: Wrote 1 windows to J0026-3512_X_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00266774 Jy ! Component: 100 - total flux cleaned = -0.00309466 Jy ! Component: 150 - total flux cleaned = -0.00309787 Jy ! Component: 200 - total flux cleaned = -0.0032215 Jy ! Component: 250 - total flux cleaned = -0.00366182 Jy ! Component: 300 - total flux cleaned = -0.00402281 Jy ! Component: 350 - total flux cleaned = -0.00412021 Jy ! Component: 400 - total flux cleaned = -0.00425542 Jy ! Component: 450 - total flux cleaned = -0.00442809 Jy ! Component: 500 - total flux cleaned = -0.00430418 Jy ! Component: 550 - total flux cleaned = -0.00418605 Jy ! Component: 600 - total flux cleaned = -0.00411073 Jy ! Component: 650 - total flux cleaned = -0.00392661 Jy ! Component: 700 - total flux cleaned = -0.00381917 Jy ! Component: 750 - total flux cleaned = -0.00378439 Jy ! Component: 800 - total flux cleaned = -0.00375055 Jy ! Component: 850 - total flux cleaned = -0.00378409 Jy ! Component: 900 - total flux cleaned = -0.00371836 Jy ! Component: 950 - total flux cleaned = -0.00365463 Jy ! Component: 1000 - total flux cleaned = -0.00359239 Jy ! Component: 1050 - total flux cleaned = -0.00356137 Jy ! Component: 1100 - total flux cleaned = -0.00343883 Jy ! Component: 1150 - total flux cleaned = -0.003348 Jy ! Component: 1200 - total flux cleaned = -0.0031978 Jy ! Component: 1250 - total flux cleaned = -0.00307851 Jy ! Component: 1300 - total flux cleaned = -0.00293067 Jy ! Component: 1350 - total flux cleaned = -0.00278387 Jy ! Component: 1400 - total flux cleaned = -0.00269631 Jy ! Component: 1450 - total flux cleaned = -0.00263842 Jy ! Component: 1500 - total flux cleaned = -0.00266738 Jy ! Component: 1550 - total flux cleaned = -0.00258132 Jy ! Component: 1600 - total flux cleaned = -0.00252454 Jy ! Component: 1650 - total flux cleaned = -0.00249606 Jy ! Component: 1700 - total flux cleaned = -0.00243944 Jy ! Component: 1750 - total flux cleaned = -0.00241149 Jy ! Component: 1800 - total flux cleaned = -0.00238347 Jy ! Component: 1850 - total flux cleaned = -0.00232761 Jy ! Component: 1900 - total flux cleaned = -0.00238391 Jy ! Component: 1950 - total flux cleaned = -0.00232824 Jy ! Component: 2000 - total flux cleaned = -0.00235617 Jy ! Total flux subtracted in 2048 components = -0.00243961 Jy ! Clean residual min=-0.001570 max=0.001478 Jy/beam ! Clean residual mean=-0.000007 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.232535 Jy keep ! Adding 120 model components to the UV plane model. ! The established model now contains 207 components and 0.232535 Jy ![Exited script file: muppet] wmap "J0026-3512_X_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.011 x 6.841 at 22.83 degrees (North through East) ! Clean map min=-0.0059344 max=0.20604 Jy/beam ! Writing clean map to FITS file: J0026-3512_X_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.206037 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000519877 device "J0026-3512_X_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0026-3512_X_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.756965 0.756965 1.51393 3.02786 6.05572 12.1114 24.2229 48.4458 96.8916 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.206 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.011 x 6.841 at 22.83 degrees (North through East) ! Clean map min=-0.0059344 max=0.20604 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0026-3512_X_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0026-3512_X_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0026-3512_X_2002_05_14_yyk_uvs.log closed on Tue Jun 26 21:51:42 2007