! Started logfile: J0025-2602_S_2002_05_14_yyk_uvs.log on Tue Jun 26 21:51:13 2007 obs J0025-2602_S_2002_05_14_yyk_uva.fits ! Reading UV FITS file: J0025-2602_S_2002_05_14_yyk_uva.fits ! AN table 1: 82 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.734688 visibilities/baseline/integration-bin. ! Found source: J0025-2602 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22947e+09 8e+06 1 8e+06 ! 02 2 2.25947e+09 8e+06 1 8e+06 ! 03 3 2.34947e+09 8e+06 1 8e+06 ! 04 4 2.36947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1153 lines of history. ! ! Reading 10844 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0025-2602_S_2002_05_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.750846 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.705 mas, bmaj=6.377 mas, bpa=3.024 degrees ! Estimated noise=1923.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.47583 Jy ! Component: 100 - total flux cleaned = 0.659581 Jy ! Total flux subtracted in 100 components = 0.659581 Jy ! Clean residual min=-0.044345 max=0.072802 Jy/beam ! Clean residual mean=0.000902 rms=0.015984 Jy/beam ! Combined flux in latest and established models = 0.659581 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.659581 Jy ! ! Correcting IF 1. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.380780Jy sigma=0.002574 ! Fit after self-cal, rms=0.380816Jy sigma=0.002572 ! Inverting map and beam ! Estimated beam: bmin=2.705 mas, bmaj=6.377 mas, bpa=3.025 degrees ! Estimated noise=1923.26 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.604 mas, bmaj=8.349 mas, bpa=2.677 degrees ! Estimated noise=1097.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.182615 Jy ! Component: 100 - total flux cleaned = 0.254021 Jy ! Component: 150 - total flux cleaned = 0.280967 Jy ! Component: 200 - total flux cleaned = 0.285527 Jy ! Total flux subtracted in 200 components = 0.285527 Jy ! Clean residual min=-0.055341 max=0.115556 Jy/beam ! Clean residual mean=0.004203 rms=0.024596 Jy/beam ! Combined flux in latest and established models = 0.945109 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 61 components and 0.945109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341762Jy sigma=0.002226 ! Fit after self-cal, rms=0.341714Jy sigma=0.002225 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.604 x 8.349 at 2.677 degrees (North through East) ! Clean map min=-0.05411 max=0.54532 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.954236 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.09 HN 1.23 KP 0.75 ! LA 0.87 NL 1.15 OV 1.21 PT 0.92 ! SC 1.07 MK 1.24 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.910877 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.91 HN 1.34 KP 1.00* ! LA 0.84 NL 1.22 OV 1.11 PT 0.97 ! SC 1.02 MK 1.47 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.888853 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.08 HN 1.35 KP 0.73 ! LA 1.05 NL 1.33 OV 1.17 PT 0.93 ! SC 0.99 MK 1.54 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.948108 ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.02 HN 1.24 KP 0.79 ! LA 0.84 NL 1.29 OV 1.00 PT 0.83 ! SC 0.93 MK 1.50 ! ! ! Fit before self-cal, rms=0.341714Jy sigma=0.002225 ! Fit after self-cal, rms=0.316440Jy sigma=0.002180 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316440Jy sigma=0.002180 ! Fit after self-cal, rms=0.318130Jy sigma=0.002176 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.932 mas, bmaj=10 mas, bpa=10.14 degrees ! Estimated noise=973.058 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0948742 Jy ! Component: 100 - total flux cleaned = -0.119677 Jy ! Component: 150 - total flux cleaned = -0.127674 Jy ! Component: 200 - total flux cleaned = -0.128473 Jy ! Total flux subtracted in 200 components = -0.128473 Jy ! Clean residual min=-0.039676 max=0.081058 Jy/beam ! Clean residual mean=0.003139 rms=0.020275 Jy/beam ! Combined flux in latest and established models = 0.816635 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 87 components and 0.816635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303889Jy sigma=0.002038 ! Fit after self-cal, rms=0.303687Jy sigma=0.002038 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303687Jy sigma=0.002038 ! Fit after self-cal, rms=0.300999Jy sigma=0.002019 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000145145 Jy ! Component: 100 - total flux cleaned = -0.000673322 Jy ! Component: 150 - total flux cleaned = -0.000972889 Jy ! Component: 200 - total flux cleaned = -0.0012315 Jy ! Total flux subtracted in 200 components = -0.0012315 Jy ! Clean residual min=-0.040026 max=0.081428 Jy/beam ! Clean residual mean=0.003154 rms=0.020366 Jy/beam ! Combined flux in latest and established models = 0.815404 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 89 components and 0.815404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300678Jy sigma=0.002018 ! Fit after self-cal, rms=0.300291Jy sigma=0.002016 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.932 x 10 at 10.14 degrees (North through East) ! Clean map min=-0.039838 max=0.52935 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300291Jy sigma=0.002016 ! Fit after self-cal, rms=0.313411Jy sigma=0.001912 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313411Jy sigma=0.001912 ! Fit after self-cal, rms=0.313357Jy sigma=0.001911 ! Inverting map and beam ! Estimated beam: bmin=3.895 mas, bmaj=10.15 mas, bpa=9.63 degrees ! Estimated noise=959.359 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179742 Jy ! Component: 100 - total flux cleaned = 0.000168053 Jy ! Component: 150 - total flux cleaned = 0.000265508 Jy ! Component: 200 - total flux cleaned = 0.000352115 Jy ! Total flux subtracted in 200 components = 0.000352115 Jy ! Clean residual min=-0.034708 max=0.079648 Jy/beam ! Clean residual mean=0.001824 rms=0.019085 Jy/beam ! Combined flux in latest and established models = 0.815756 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 94 components and 0.815756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313472Jy sigma=0.001911 ! Fit after self-cal, rms=0.313360Jy sigma=0.001911 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313360Jy sigma=0.001911 ! Fit after self-cal, rms=0.312521Jy sigma=0.001906 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312521Jy sigma=0.001906 ! Fit after self-cal, rms=0.312506Jy sigma=0.001906 ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=10.07 mas, bpa=9.448 degrees ! Estimated noise=956.917 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000473778 Jy ! Component: 100 - total flux cleaned = 0.000463619 Jy ! Component: 150 - total flux cleaned = 0.000554627 Jy ! Component: 200 - total flux cleaned = 0.000640899 Jy ! Total flux subtracted in 200 components = 0.000640899 Jy ! Clean residual min=-0.034593 max=0.078953 Jy/beam ! Clean residual mean=0.001812 rms=0.018955 Jy/beam ! Combined flux in latest and established models = 0.816397 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 95 components and 0.816397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312564Jy sigma=0.001905 ! Fit after self-cal, rms=0.312502Jy sigma=0.001905 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.143 mas, bmaj=22.62 mas, bpa=7.367 degrees ! Estimated noise=1134.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.011886 Jy ! Component: 100 - total flux cleaned = 0.0118862 Jy ! Component: 150 - total flux cleaned = 0.0118762 Jy ! Component: 200 - total flux cleaned = 0.0118654 Jy ! Total flux subtracted in 200 components = 0.0118654 Jy ! Clean residual min=-0.048122 max=0.106103 Jy/beam ! Clean residual mean=0.002722 rms=0.028076 Jy/beam ! Combined flux in latest and established models = 0.828262 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 102 components and 0.828263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315523Jy sigma=0.001912 ! Fit after self-cal, rms=0.313853Jy sigma=0.001909 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.755 mas, bmaj=6.887 mas, bpa=6.914 degrees ! Estimated noise=1825.9 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.44697 Jy ! Component: 100 - total flux cleaned = 0.615475 Jy ! Component: 150 - total flux cleaned = 0.697925 Jy ! Component: 200 - total flux cleaned = 0.742762 Jy ! Total flux subtracted in 200 components = 0.742762 Jy ! Clean residual min=-0.035733 max=0.050705 Jy/beam ! Clean residual mean=0.000375 rms=0.010765 Jy/beam ! Combined flux in latest and established models = 0.742762 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 0.742762 Jy ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=10.07 mas, bpa=9.448 degrees ! Estimated noise=956.917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.048834 Jy ! Component: 100 - total flux cleaned = 0.0585078 Jy ! Component: 150 - total flux cleaned = 0.0598414 Jy ! Component: 200 - total flux cleaned = 0.0614054 Jy ! Total flux subtracted in 200 components = 0.0614054 Jy ! Clean residual min=-0.035969 max=0.081316 Jy/beam ! Clean residual mean=0.001971 rms=0.019304 Jy/beam ! Combined flux in latest and established models = 0.804167 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 0.804167 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.143 mas, bmaj=22.62 mas, bpa=7.367 degrees ! Estimated noise=1134.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167867 Jy ! Component: 100 - total flux cleaned = 0.0167974 Jy ! Component: 150 - total flux cleaned = 0.016814 Jy ! Component: 200 - total flux cleaned = 0.0168286 Jy ! Total flux subtracted in 200 components = 0.0168286 Jy ! Clean residual min=-0.047467 max=0.107692 Jy/beam ! Clean residual mean=0.002884 rms=0.028195 Jy/beam ! Combined flux in latest and established models = 0.820996 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 69 components and 0.820996 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=10.07 mas, bpa=9.448 degrees ! Estimated noise=956.917 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0111258 Jy ! Component: 100 - total flux cleaned = -0.0102859 Jy ! Component: 150 - total flux cleaned = -0.00965252 Jy ! Component: 200 - total flux cleaned = -0.00940404 Jy ! Total flux subtracted in 200 components = -0.00940404 Jy ! Clean residual min=-0.033960 max=0.080453 Jy/beam ! Clean residual mean=0.001877 rms=0.018974 Jy/beam ! Combined flux in latest and established models = 0.811592 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 74 components and 0.811592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311759Jy sigma=0.001907 ! Fit after self-cal, rms=0.311649Jy sigma=0.001907 wmodel J0025-2602_S_2002_05_14_yyk\_map.mod ! Writing 74 model components to file: J0025-2602_S_2002_05_14_yyk_map.mod wobs J0025-2602_S_2002_05_14_yyk\_uvs.fits ! Writing UV FITS file: J0025-2602_S_2002_05_14_yyk_uvs.fits wwins J0025-2602_S_2002_05_14_yyk\_map.win ! wwins: Wrote 1 windows to J0025-2602_S_2002_05_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0337378 Jy ! Component: 100 - total flux cleaned = 0.0603479 Jy ! Component: 150 - total flux cleaned = 0.082785 Jy ! Component: 200 - total flux cleaned = 0.102301 Jy ! Component: 250 - total flux cleaned = 0.119518 Jy ! Component: 300 - total flux cleaned = 0.134882 Jy ! Component: 350 - total flux cleaned = 0.147198 Jy ! Component: 400 - total flux cleaned = 0.157701 Jy ! Component: 450 - total flux cleaned = 0.167139 Jy ! Component: 500 - total flux cleaned = 0.175703 Jy ! Component: 550 - total flux cleaned = 0.182558 Jy ! Component: 600 - total flux cleaned = 0.188712 Jy ! Component: 650 - total flux cleaned = 0.194226 Jy ! Component: 700 - total flux cleaned = 0.199147 Jy ! Component: 750 - total flux cleaned = 0.202719 Jy ! Component: 800 - total flux cleaned = 0.206554 Jy ! Component: 850 - total flux cleaned = 0.210262 Jy ! Component: 900 - total flux cleaned = 0.21279 Jy ! Component: 950 - total flux cleaned = 0.21525 Jy ! Component: 1000 - total flux cleaned = 0.217651 Jy ! Component: 1050 - total flux cleaned = 0.220329 Jy ! Component: 1100 - total flux cleaned = 0.222617 Jy ! Component: 1150 - total flux cleaned = 0.225486 Jy ! Component: 1200 - total flux cleaned = 0.227357 Jy ! Component: 1250 - total flux cleaned = 0.230111 Jy ! Component: 1300 - total flux cleaned = 0.232504 Jy ! Component: 1350 - total flux cleaned = 0.235135 Jy ! Component: 1400 - total flux cleaned = 0.237996 Jy ! Component: 1450 - total flux cleaned = 0.239399 Jy ! Component: 1500 - total flux cleaned = 0.242156 Jy ! Component: 1550 - total flux cleaned = 0.244583 Jy ! Component: 1600 - total flux cleaned = 0.246438 Jy ! Component: 1650 - total flux cleaned = 0.249035 Jy ! Component: 1700 - total flux cleaned = 0.250814 Jy ! Component: 1750 - total flux cleaned = 0.252562 Jy ! Component: 1800 - total flux cleaned = 0.254522 Jy ! Component: 1850 - total flux cleaned = 0.256443 Jy ! Component: 1900 - total flux cleaned = 0.257384 Jy ! Component: 1950 - total flux cleaned = 0.259009 Jy ! Component: 2000 - total flux cleaned = 0.260379 Jy ! Total flux subtracted in 2048 components = 0.261954 Jy ! Clean residual min=-0.013144 max=0.013932 Jy/beam ! Clean residual mean=0.000872 rms=0.005632 Jy/beam ! Combined flux in latest and established models = 1.07355 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 341 components and 1.07355 Jy ![Exited script file: muppet] wmap "J0025-2602_S_2002_05_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.872 x 10.07 at 9.448 degrees (North through East) ! Clean map min=-0.021455 max=0.53105 Jy/beam ! Writing clean map to FITS file: J0025-2602_S_2002_05_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.531046 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00555566 device "J0025-2602_S_2002_05_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0025-2602_S_2002_05_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.13852 3.13852 6.27704 12.5541 25.1082 50.2163 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0166 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.531 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.872 x 10.07 at 9.448 degrees (North through East) ! Clean map min=-0.021455 max=0.53105 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0025-2602_S_2002_05_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0025-2602_S_2002_05_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0025-2602_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 21:51:21 2007