! Started logfile: J0024-4202_S_2002_05_14_yyk_uvs.log on Tue Jun 26 21:50:56 2007
obs J0024-4202_S_2002_05_14_yyk_uva.fits
! Reading UV FITS file: J0024-4202_S_2002_05_14_yyk_uva.fits
! AN table 1: 38 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.55614 visibilities/baseline/integration-bin.
! Found source: J0024-4202
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22947e+09        8e+06          1        8e+06
!  02        2  2.25947e+09        8e+06          1        8e+06
!  03        3  2.34947e+09        8e+06          1        8e+06
!  04        4  2.36947e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1159 lines of history.
! 
! Reading 3804 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0024-4202_S_2002_05_14_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 1.54496 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.226 mas, bmaj=7.004 mas, bpa=-3.488 degrees
! Estimated noise=3816.52 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.03048 Jy
! Component: 100  -  total flux cleaned = 1.46853 Jy
! Total flux subtracted in 100 components = 1.46853 Jy
! Clean residual min=-0.107602 max=0.307237 Jy/beam
! Clean residual mean=0.004852 rms=0.060747 Jy/beam
! Combined flux in latest and established models = 1.46853 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 1.46853 Jy
! 
! Correcting IF 1.
!  A total of 92 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 122 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 92 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 92 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.676772Jy  sigma=0.003626
! Fit after  self-cal, rms=0.675627Jy  sigma=0.003620
! Inverting map and beam 
! Estimated beam: bmin=2.226 mas, bmaj=7.004 mas, bpa=-3.488 degrees
! Estimated noise=3816.52 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.818 mas, bmaj=8.006 mas, bpa=-4.82 degrees
! Estimated noise=2213.28 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.33112 Jy
! Component: 100  -  total flux cleaned = 0.451618 Jy
! Component: 150  -  total flux cleaned = 0.496593 Jy
! Component: 200  -  total flux cleaned = 0.503909 Jy
! Total flux subtracted in 200 components = 0.503909 Jy
! Clean residual min=-0.112195 max=0.369723 Jy/beam
! Clean residual mean=0.006299 rms=0.067051 Jy/beam
! Combined flux in latest and established models = 1.97244 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 46 components and 1.97244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.575175Jy  sigma=0.003047
! Fit after  self-cal, rms=0.574408Jy  sigma=0.003046
! Inverting map 
! Added new window around map position (-25.5, 13.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.346265 Jy
! Component: 100  -  total flux cleaned = 0.459366 Jy
! Component: 150  -  total flux cleaned = 0.524444 Jy
! Component: 200  -  total flux cleaned = 0.553873 Jy
! Total flux subtracted in 200 components = 0.553873 Jy
! Clean residual min=-0.089158 max=0.111246 Jy/beam
! Clean residual mean=0.003294 rms=0.032609 Jy/beam
! Combined flux in latest and established models = 2.52631 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 51 model components to the UV plane model.
! The established model now contains 93 components and 2.52631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.432802Jy  sigma=0.002162
! Fit after  self-cal, rms=0.416881Jy  sigma=0.002035
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.818 x 8.006 at -4.82 degrees (North through East)
! Clean map  min=-0.076192  max=1.1607 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.989393
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.07     HN        1.00*    KP        0.95     
!   LA        0.89     NL        1.23     OV        0.99     PT        0.98     
!   SC        1.08     MK        0.93     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.971644
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.99     HN        1.00*    KP        1.00*    
!   LA        0.89     NL        1.31     OV        1.00     PT        0.96     
!   SC        1.13     MK        1.02     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.959306
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.93     HN        1.00*    KP        1.02     
!   LA        0.90     NL        1.49     OV        1.11     PT        1.10     
!   SC        0.85     MK        1.03     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.01248
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.88     HN        1.00*    KP        1.08     
!   LA        0.76     NL        1.47     OV        0.94     PT        0.95     
!   SC        0.78     MK        1.01     
! 
! 
! Fit before self-cal, rms=0.416881Jy  sigma=0.002035
! Fit after  self-cal, rms=0.324511Jy  sigma=0.001527
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.324511Jy  sigma=0.001527
! Fit after  self-cal, rms=0.324586Jy  sigma=0.001527
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.779 mas, bmaj=7.809 mas, bpa=-3.124 degrees
! Estimated noise=2086.84 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00378167 Jy
! Component: 100  -  total flux cleaned = 0.00561819 Jy
! Component: 150  -  total flux cleaned = 0.00671416 Jy
! Component: 200  -  total flux cleaned = 0.00692649 Jy
! Total flux subtracted in 200 components = 0.00692649 Jy
! Clean residual min=-0.030531 max=0.037987 Jy/beam
! Clean residual mean=-0.000615 rms=0.010581 Jy/beam
! Combined flux in latest and established models = 2.53324 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 123 components and 2.53324 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.310611Jy  sigma=0.001436
! Fit after  self-cal, rms=0.309972Jy  sigma=0.001424
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.309972Jy  sigma=0.001424
! Fit after  self-cal, rms=0.290056Jy  sigma=0.001356
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0185778 Jy
! Component: 100  -  total flux cleaned = 0.019234 Jy
! Component: 150  -  total flux cleaned = 0.0188653 Jy
! Component: 200  -  total flux cleaned = 0.0185757 Jy
! Total flux subtracted in 200 components = 0.0185757 Jy
! Clean residual min=-0.030639 max=0.035252 Jy/beam
! Clean residual mean=-0.000913 rms=0.009406 Jy/beam
! Combined flux in latest and established models = 2.55181 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 131 components and 2.55181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.288341Jy  sigma=0.001346
! Fit after  self-cal, rms=0.284506Jy  sigma=0.001333
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.779 x 7.809 at -3.124 degrees (North through East)
! Clean map  min=-0.034593  max=1.1 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.284506Jy  sigma=0.001333
! Fit after  self-cal, rms=0.277989Jy  sigma=0.001271
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.277989Jy  sigma=0.001271
! Fit after  self-cal, rms=0.276896Jy  sigma=0.001268
! Inverting map and beam 
! Estimated beam: bmin=2.79 mas, bmaj=7.845 mas, bpa=-3.493 degrees
! Estimated noise=2079.99 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0196344 Jy
! Component: 100  -  total flux cleaned = 0.0221154 Jy
! Component: 150  -  total flux cleaned = 0.0217785 Jy
! Component: 200  -  total flux cleaned = 0.0212832 Jy
! Total flux subtracted in 200 components = 0.0212832 Jy
! Clean residual min=-0.026745 max=0.030260 Jy/beam
! Clean residual mean=-0.000054 rms=0.007316 Jy/beam
! Combined flux in latest and established models = 2.5731 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 141 components and 2.57309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.274593Jy  sigma=0.001257
! Fit after  self-cal, rms=0.274208Jy  sigma=0.001254
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.274208Jy  sigma=0.001254
! Fit after  self-cal, rms=0.273231Jy  sigma=0.001243
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.273231Jy  sigma=0.001243
! Fit after  self-cal, rms=0.273143Jy  sigma=0.001243
! Inverting map and beam 
! Estimated beam: bmin=2.796 mas, bmaj=7.859 mas, bpa=-3.586 degrees
! Estimated noise=2080.21 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00907858 Jy
! Component: 100  -  total flux cleaned = 0.00906504 Jy
! Component: 150  -  total flux cleaned = 0.00834471 Jy
! Component: 200  -  total flux cleaned = 0.00745692 Jy
! Total flux subtracted in 200 components = 0.00745691 Jy
! Clean residual min=-0.026513 max=0.028253 Jy/beam
! Clean residual mean=0.000099 rms=0.006781 Jy/beam
! Combined flux in latest and established models = 2.58055 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 154 components and 2.58055 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.272194Jy  sigma=0.001239
! Fit after  self-cal, rms=0.272180Jy  sigma=0.001239
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.639 mas, bmaj=31.6 mas, bpa=0.4822 degrees
! Estimated noise=2819.74 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267991 Jy
! Component: 100  -  total flux cleaned = 0.00211148 Jy
! Component: 150  -  total flux cleaned = 0.00137164 Jy
! Component: 200  -  total flux cleaned = 0.000914097 Jy
! Total flux subtracted in 200 components = 0.000914097 Jy
! Clean residual min=-0.026283 max=0.022546 Jy/beam
! Clean residual mean=0.000145 rms=0.009595 Jy/beam
! Combined flux in latest and established models = 2.58147 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 161 components and 2.58147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.271835Jy  sigma=0.001238
! Fit after  self-cal, rms=0.271836Jy  sigma=0.001238
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.216 mas, bmaj=6.932 mas, bpa=-2.761 degrees
! Estimated noise=3637.52 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.98188 Jy
! Component: 100  -  total flux cleaned = 1.44807 Jy
! Component: 150  -  total flux cleaned = 1.74331 Jy
! Component: 200  -  total flux cleaned = 1.9441 Jy
! Total flux subtracted in 200 components = 1.9441 Jy
! Clean residual min=-0.063339 max=0.103206 Jy/beam
! Clean residual mean=0.002118 rms=0.029303 Jy/beam
! Combined flux in latest and established models = 1.9441 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 56 model components to the UV plane model.
! The established model now contains 56 components and 1.9441 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.796 mas, bmaj=7.859 mas, bpa=-3.586 degrees
! Estimated noise=2080.21 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.219131 Jy
! Component: 100  -  total flux cleaned = 0.353625 Jy
! Component: 150  -  total flux cleaned = 0.439365 Jy
! Component: 200  -  total flux cleaned = 0.495581 Jy
! Total flux subtracted in 200 components = 0.495581 Jy
! Clean residual min=-0.034429 max=0.048875 Jy/beam
! Clean residual mean=0.000973 rms=0.011947 Jy/beam
! Combined flux in latest and established models = 2.43968 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 106 components and 2.43968 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.639 mas, bmaj=31.6 mas, bpa=0.4822 degrees
! Estimated noise=2819.74 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0604552 Jy
! Component: 100  -  total flux cleaned = 0.0882917 Jy
! Component: 150  -  total flux cleaned = 0.102168 Jy
! Component: 200  -  total flux cleaned = 0.107052 Jy
! Total flux subtracted in 200 components = 0.107052 Jy
! Clean residual min=-0.023734 max=0.026256 Jy/beam
! Clean residual mean=0.000608 rms=0.010676 Jy/beam
! Combined flux in latest and established models = 2.54673 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 124 components and 2.54673 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.796 mas, bmaj=7.859 mas, bpa=-3.586 degrees
! Estimated noise=2080.21 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00811723 Jy
! Component: 100  -  total flux cleaned = -0.00590766 Jy
! Component: 150  -  total flux cleaned = -0.00475623 Jy
! Component: 200  -  total flux cleaned = -0.00430353 Jy
! Total flux subtracted in 200 components = -0.00430353 Jy
! Clean residual min=-0.028243 max=0.038449 Jy/beam
! Clean residual mean=0.000273 rms=0.008759 Jy/beam
! Combined flux in latest and established models = 2.54243 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 152 components and 2.54243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.279272Jy  sigma=0.001275
! Fit after  self-cal, rms=0.278853Jy  sigma=0.001273
wmodel J0024-4202_S_2002_05_14_yyk\_map.mod
! Writing 152 model components to file: J0024-4202_S_2002_05_14_yyk_map.mod
wobs J0024-4202_S_2002_05_14_yyk\_uvs.fits
! Writing UV FITS file: J0024-4202_S_2002_05_14_yyk_uvs.fits
wwins J0024-4202_S_2002_05_14_yyk\_map.win
! wwins: Wrote 2 windows to J0024-4202_S_2002_05_14_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0166188 Jy
! Component: 100  -  total flux cleaned = 0.0263045 Jy
! Component: 150  -  total flux cleaned = 0.0330439 Jy
! Component: 200  -  total flux cleaned = 0.0388119 Jy
! Component: 250  -  total flux cleaned = 0.0432995 Jy
! Component: 300  -  total flux cleaned = 0.0477158 Jy
! Component: 350  -  total flux cleaned = 0.0506651 Jy
! Component: 400  -  total flux cleaned = 0.0539889 Jy
! Component: 450  -  total flux cleaned = 0.0552836 Jy
! Component: 500  -  total flux cleaned = 0.05676 Jy
! Component: 550  -  total flux cleaned = 0.0581543 Jy
! Component: 600  -  total flux cleaned = 0.0592659 Jy
! Component: 650  -  total flux cleaned = 0.0599032 Jy
! Component: 700  -  total flux cleaned = 0.0607056 Jy
! Component: 750  -  total flux cleaned = 0.0614794 Jy
! Component: 800  -  total flux cleaned = 0.0622281 Jy
! Component: 850  -  total flux cleaned = 0.0635082 Jy
! Component: 900  -  total flux cleaned = 0.0645734 Jy
! Component: 950  -  total flux cleaned = 0.0661146 Jy
! Component: 1000  -  total flux cleaned = 0.067112 Jy
! Component: 1050  -  total flux cleaned = 0.0687228 Jy
! Component: 1100  -  total flux cleaned = 0.0702828 Jy
! Component: 1150  -  total flux cleaned = 0.071796 Jy
! Component: 1200  -  total flux cleaned = 0.0734238 Jy
! Component: 1250  -  total flux cleaned = 0.0751635 Jy
! Component: 1300  -  total flux cleaned = 0.0770082 Jy
! Component: 1350  -  total flux cleaned = 0.078952 Jy
! Component: 1400  -  total flux cleaned = 0.0807205 Jy
! Component: 1450  -  total flux cleaned = 0.0825862 Jy
! Component: 1500  -  total flux cleaned = 0.0840231 Jy
! Component: 1550  -  total flux cleaned = 0.0853087 Jy
! Component: 1600  -  total flux cleaned = 0.0861953 Jy
! Component: 1650  -  total flux cleaned = 0.0871941 Jy
! Component: 1700  -  total flux cleaned = 0.0876882 Jy
! Component: 1750  -  total flux cleaned = 0.0881774 Jy
! Component: 1800  -  total flux cleaned = 0.0884197 Jy
! Component: 1850  -  total flux cleaned = 0.08854 Jy
! Component: 1900  -  total flux cleaned = 0.0890167 Jy
! Component: 1950  -  total flux cleaned = 0.0891356 Jy
! Component: 2000  -  total flux cleaned = 0.0896046 Jy
! Total flux subtracted in 2048 components = 0.0898365 Jy
! Clean residual min=-0.006879 max=0.006976 Jy/beam
! Clean residual mean=0.000324 rms=0.002428 Jy/beam
! Combined flux in latest and established models = 2.63227 Jy
keep
! Adding 115 model components to the UV plane model.
! The established model now contains 267 components and 2.63227 Jy
![Exited script file: muppet]
wmap "J0024-4202_S_2002_05_14_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.796 x 7.859 at -3.586 degrees (North through East)
! Clean map  min=-0.014507  max=1.1113 Jy/beam
! Writing clean map to FITS file: J0024-4202_S_2002_05_14_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.1113 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0021654 
device "J0024-4202_S_2002_05_14_yyk\_map.eps/VPS"
! Attempting to open device: 'J0024-4202_S_2002_05_14_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.584557 0.584557 1.16911 2.33823 4.67646 9.35292 18.7058 37.4117 74.8233
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0064 
print "peak=",int(peak_flux*1000)/1000
! peak= 1.111 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.796 x 7.859 at -3.586 degrees (North through East)
! Clean map  min=-0.014507  max=1.1113 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0024-4202_S_2002_05_14_yyk\_map.gif/gif"
! Attempting to open device: 'J0024-4202_S_2002_05_14_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0024-4202_S_2002_05_14_yyk_uvs.log closed on Tue Jun 26 21:51:03 2007