! Started logfile: J0019-3031_X_2002_01_31_yyk_uvs.log on Wed Jun 27 10:42:37 2007 obs J0019-3031_X_2002_01_31_yyk_uva.fits ! Reading UV FITS file: J0019-3031_X_2002_01_31_yyk_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.665185 visibilities/baseline/integration-bin. ! Found source: J0019-3031 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40947e+09 8e+06 1 8e+06 ! 02 2 8.47947e+09 8e+06 1 8e+06 ! 03 3 8.79447e+09 8e+06 1 8e+06 ! 04 4 8.89947e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1544 lines of history. ! ! Reading 8980 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 flag NL ! Flagging baselines of antenna 1:NL in the currently selected channels. ![@muppet J0019-3031_X_2002_01_31_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.304817 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6154 mas, bmaj=1.52 mas, bpa=2.064 degrees ! Estimated noise=1844.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.202341 Jy ! Component: 100 - total flux cleaned = 0.237442 Jy ! Total flux subtracted in 100 components = 0.237442 Jy ! Clean residual min=-0.010558 max=0.013315 Jy/beam ! Clean residual mean=-0.000017 rms=0.002889 Jy/beam ! Combined flux in latest and established models = 0.237442 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.237442 Jy ! ! Correcting IF 1. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.177869Jy sigma=0.001237 ! Fit after self-cal, rms=0.177710Jy sigma=0.001236 ! Inverting map and beam ! Estimated beam: bmin=0.6154 mas, bmaj=1.52 mas, bpa=2.064 degrees ! Estimated noise=1844.17 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8719 mas, bmaj=2.117 mas, bpa=4.462 degrees ! Estimated noise=1060.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0304977 Jy ! Component: 100 - total flux cleaned = 0.0396665 Jy ! Component: 150 - total flux cleaned = 0.0424871 Jy ! Component: 200 - total flux cleaned = 0.0433697 Jy ! Total flux subtracted in 200 components = 0.0433697 Jy ! Clean residual min=-0.011171 max=0.011129 Jy/beam ! Clean residual mean=0.000085 rms=0.002824 Jy/beam ! Combined flux in latest and established models = 0.280811 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.280811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175150Jy sigma=0.001210 ! Fit after self-cal, rms=0.175149Jy sigma=0.001210 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8719 x 2.117 at 4.462 degrees (North through East) ! Clean map min=-0.010454 max=0.24563 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00117 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.90 HN 1.00* KP 1.02 ! LA 1.17 MK 0.97 NL 1.00* OV 0.92 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01026 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.89 HN 1.00* KP 0.97 ! LA 1.16 MK 1.00 NL 1.00* OV 0.90 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.986322 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.90 HN 1.00* KP 0.99 ! LA 1.15 MK 1.03 NL 1.00* OV 0.96 ! PT 1.06 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.970849 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.88 HN 1.00* KP 1.09 ! LA 1.16 MK 1.04 NL 1.00* OV 0.99 ! PT 1.16 SC 1.00 ! ! ! Fit before self-cal, rms=0.175149Jy sigma=0.001210 ! Fit after self-cal, rms=0.174924Jy sigma=0.001192 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174924Jy sigma=0.001192 ! Fit after self-cal, rms=0.174930Jy sigma=0.001192 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8801 mas, bmaj=2.136 mas, bpa=4.468 degrees ! Estimated noise=1043.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00287951 Jy ! Component: 100 - total flux cleaned = -0.00337702 Jy ! Component: 150 - total flux cleaned = -0.00337983 Jy ! Component: 200 - total flux cleaned = -0.00337766 Jy ! Total flux subtracted in 200 components = -0.00337766 Jy ! Clean residual min=-0.003818 max=0.004295 Jy/beam ! Clean residual mean=0.000020 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.277434 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 36 components and 0.277434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174873Jy sigma=0.001192 ! Fit after self-cal, rms=0.174872Jy sigma=0.001192 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174872Jy sigma=0.001192 ! Fit after self-cal, rms=0.171666Jy sigma=0.001167 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000966506 Jy ! Component: 100 - total flux cleaned = 0.000829735 Jy ! Component: 150 - total flux cleaned = 0.000779469 Jy ! Component: 200 - total flux cleaned = 0.000733445 Jy ! Total flux subtracted in 200 components = 0.000733445 Jy ! Clean residual min=-0.003973 max=0.004235 Jy/beam ! Clean residual mean=0.000022 rms=0.001177 Jy/beam ! Combined flux in latest and established models = 0.278167 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.278167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171642Jy sigma=0.001166 ! Fit after self-cal, rms=0.171164Jy sigma=0.001163 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8801 x 2.136 at 4.468 degrees (North through East) ! Clean map min=-0.0034832 max=0.24584 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171164Jy sigma=0.001163 ! Fit after self-cal, rms=0.172886Jy sigma=0.001159 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172886Jy sigma=0.001159 ! Fit after self-cal, rms=0.172747Jy sigma=0.001158 ! Inverting map and beam ! Estimated beam: bmin=0.8787 mas, bmaj=2.097 mas, bpa=5.014 degrees ! Estimated noise=1040.14 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000773516 Jy ! Component: 100 - total flux cleaned = 0.000735392 Jy ! Component: 150 - total flux cleaned = 0.000735455 Jy ! Component: 200 - total flux cleaned = 0.000731011 Jy ! Total flux subtracted in 200 components = 0.000731011 Jy ! Clean residual min=-0.004045 max=0.004079 Jy/beam ! Clean residual mean=-0.000009 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.278898 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 43 components and 0.278898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172733Jy sigma=0.001158 ! Fit after self-cal, rms=0.172676Jy sigma=0.001157 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172676Jy sigma=0.001157 ! Fit after self-cal, rms=0.172419Jy sigma=0.001154 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172419Jy sigma=0.001154 ! Fit after self-cal, rms=0.172401Jy sigma=0.001153 ! Inverting map and beam ! Estimated beam: bmin=0.8765 mas, bmaj=2.084 mas, bpa=5.042 degrees ! Estimated noise=1039.57 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000870126 Jy ! Component: 100 - total flux cleaned = 0.000834005 Jy ! Component: 150 - total flux cleaned = 0.000831188 Jy ! Component: 200 - total flux cleaned = 0.000829516 Jy ! Total flux subtracted in 200 components = 0.000829516 Jy ! Clean residual min=-0.003986 max=0.004049 Jy/beam ! Clean residual mean=-0.000007 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.279728 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.279728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172391Jy sigma=0.001153 ! Fit after self-cal, rms=0.172385Jy sigma=0.001153 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.86 mas, bmaj=7.878 mas, bpa=14.18 degrees ! Estimated noise=1317.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000648495 Jy ! Component: 100 - total flux cleaned = 0.000659122 Jy ! Component: 150 - total flux cleaned = 0.000659666 Jy ! Component: 200 - total flux cleaned = 0.000669324 Jy ! Total flux subtracted in 200 components = 0.000669324 Jy ! Clean residual min=-0.003464 max=0.004224 Jy/beam ! Clean residual mean=-0.000009 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.280397 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 48 components and 0.280397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172385Jy sigma=0.001153 ! Fit after self-cal, rms=0.172384Jy sigma=0.001153 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6165 mas, bmaj=1.501 mas, bpa=2.332 degrees ! Estimated noise=1806.49 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.201339 Jy ! Component: 100 - total flux cleaned = 0.236655 Jy ! Component: 150 - total flux cleaned = 0.254143 Jy ! Component: 200 - total flux cleaned = 0.263782 Jy ! Total flux subtracted in 200 components = 0.263782 Jy ! Clean residual min=-0.006729 max=0.006739 Jy/beam ! Clean residual mean=-0.000025 rms=0.001817 Jy/beam ! Combined flux in latest and established models = 0.263782 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.263782 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8765 mas, bmaj=2.084 mas, bpa=5.042 degrees ! Estimated noise=1039.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, 0.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115744 Jy ! Component: 100 - total flux cleaned = 0.0155835 Jy ! Component: 150 - total flux cleaned = 0.0171128 Jy ! Component: 200 - total flux cleaned = 0.0173271 Jy ! Total flux subtracted in 200 components = 0.0173271 Jy ! Clean residual min=-0.003667 max=0.003591 Jy/beam ! Clean residual mean=-0.000006 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.281109 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 51 components and 0.281109 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.86 mas, bmaj=7.878 mas, bpa=14.18 degrees ! Estimated noise=1317.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000792637 Jy ! Component: 100 - total flux cleaned = 0.00085525 Jy ! Component: 150 - total flux cleaned = 0.000881884 Jy ! Component: 200 - total flux cleaned = 0.000907272 Jy ! Total flux subtracted in 200 components = 0.000907272 Jy ! Clean residual min=-0.003580 max=0.003828 Jy/beam ! Clean residual mean=-0.000007 rms=0.001234 Jy/beam ! Combined flux in latest and established models = 0.282016 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 55 components and 0.282016 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8765 mas, bmaj=2.084 mas, bpa=5.042 degrees ! Estimated noise=1039.57 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000443692 Jy ! Component: 100 - total flux cleaned = -0.000363776 Jy ! Component: 150 - total flux cleaned = -0.000294184 Jy ! Component: 200 - total flux cleaned = -0.00026141 Jy ! Total flux subtracted in 200 components = -0.00026141 Jy ! Clean residual min=-0.003654 max=0.003398 Jy/beam ! Clean residual mean=-0.000005 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.281755 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 63 components and 0.281755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172297Jy sigma=0.001153 ! Fit after self-cal, rms=0.172294Jy sigma=0.001153 wmodel J0019-3031_X_2002_01_31_yyk\_map.mod ! Writing 63 model components to file: J0019-3031_X_2002_01_31_yyk_map.mod wobs J0019-3031_X_2002_01_31_yyk\_uvs.fits ! Applying 75 buffered edits. ! Writing UV FITS file: J0019-3031_X_2002_01_31_yyk_uvs.fits wwins J0019-3031_X_2002_01_31_yyk\_map.win ! wwins: Wrote 2 windows to J0019-3031_X_2002_01_31_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000639245 Jy ! Component: 100 - total flux cleaned = -0.000821874 Jy ! Component: 150 - total flux cleaned = -0.00122006 Jy ! Component: 200 - total flux cleaned = -0.00138026 Jy ! Component: 250 - total flux cleaned = -0.0014826 Jy ! Component: 300 - total flux cleaned = -0.00128688 Jy ! Component: 350 - total flux cleaned = -0.000958548 Jy ! Component: 400 - total flux cleaned = -0.000730758 Jy ! Component: 450 - total flux cleaned = -0.000466218 Jy ! Component: 500 - total flux cleaned = -0.000251814 Jy ! Component: 550 - total flux cleaned = -8.38928e-05 Jy ! Component: 600 - total flux cleaned = 8.04459e-05 Jy ! Component: 650 - total flux cleaned = 0.000360173 Jy ! Component: 700 - total flux cleaned = 0.000477054 Jy ! Component: 750 - total flux cleaned = 0.000668437 Jy ! Component: 800 - total flux cleaned = 0.000743746 Jy ! Component: 850 - total flux cleaned = 0.00092756 Jy ! Component: 900 - total flux cleaned = 0.000999827 Jy ! Component: 950 - total flux cleaned = 0.00114152 Jy ! Component: 1000 - total flux cleaned = 0.00121138 Jy ! Component: 1050 - total flux cleaned = 0.00124644 Jy ! Component: 1100 - total flux cleaned = 0.00141519 Jy ! Component: 1150 - total flux cleaned = 0.00154723 Jy ! Component: 1200 - total flux cleaned = 0.00164506 Jy ! Component: 1250 - total flux cleaned = 0.00180582 Jy ! Component: 1300 - total flux cleaned = 0.00199588 Jy ! Component: 1350 - total flux cleaned = 0.00202714 Jy ! Component: 1400 - total flux cleaned = 0.00215068 Jy ! Component: 1450 - total flux cleaned = 0.00221127 Jy ! Component: 1500 - total flux cleaned = 0.00230171 Jy ! Component: 1550 - total flux cleaned = 0.00239051 Jy ! Component: 1600 - total flux cleaned = 0.00239037 Jy ! Component: 1650 - total flux cleaned = 0.00241968 Jy ! Component: 1700 - total flux cleaned = 0.00244854 Jy ! Component: 1750 - total flux cleaned = 0.00253374 Jy ! Component: 1800 - total flux cleaned = 0.00261782 Jy ! Component: 1850 - total flux cleaned = 0.002645 Jy ! Component: 1900 - total flux cleaned = 0.0026726 Jy ! Component: 1950 - total flux cleaned = 0.00269956 Jy ! Component: 2000 - total flux cleaned = 0.00280696 Jy ! Total flux subtracted in 2048 components = 0.00283316 Jy ! Clean residual min=-0.001506 max=0.001776 Jy/beam ! Clean residual mean=-0.000003 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.284588 Jy keep ! Adding 124 model components to the UV plane model. ! The established model now contains 187 components and 0.284588 Jy ![Exited script file: muppet] wmap "J0019-3031_X_2002_01_31_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8765 x 2.084 at 5.042 degrees (North through East) ! Clean map min=-0.0030682 max=0.24244 Jy/beam ! Writing clean map to FITS file: J0019-3031_X_2002_01_31_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.242439 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000477829 device "J0019-3031_X_2002_01_31_yyk\_map.eps/VPS" ! Attempting to open device: 'J0019-3031_X_2002_01_31_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.591277 0.591277 1.18255 2.36511 4.73022 9.46044 18.9209 37.8417 75.6835 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.242 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8765 x 2.084 at 5.042 degrees (North through East) ! Clean map min=-0.0030682 max=0.24244 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0019-3031_X_2002_01_31_yyk\_map.gif/gif" ! Attempting to open device: 'J0019-3031_X_2002_01_31_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0019-3031_X_2002_01_31_yyk_uvs.log closed on Wed Jun 27 10:42:44 2007