! Started logfile: J2357-0152_X_1997_05_07_yyk_uvs.log on Mon Jan 8 10:57:16 2007 obs J2357-0152_X_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J2357-0152_X_1997_05_07_yyk_uva.fits ! AN table 1: 148 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.87012 visibilities/baseline/integration-bin. ! Found source: J2357-0152 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 613 lines of history. ! ! Reading 23180 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2357-0152_X_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.322268 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7261 mas, bmaj=1.918 mas, bpa=-3.738 degrees ! Estimated noise=1083.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.215166 Jy ! Component: 100 - total flux cleaned = 0.255564 Jy ! Total flux subtracted in 100 components = 0.255564 Jy ! Clean residual min=-0.008530 max=0.011882 Jy/beam ! Clean residual mean=-0.000059 rms=0.002097 Jy/beam ! Combined flux in latest and established models = 0.255564 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.255564 Jy ! ! Correcting IF 1. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.193734Jy sigma=0.001243 ! Fit after self-cal, rms=0.193662Jy sigma=0.001243 ! Inverting map and beam ! Estimated beam: bmin=0.7261 mas, bmaj=1.918 mas, bpa=-3.738 degrees ! Estimated noise=1083.25 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.886 mas, bmaj=2.168 mas, bpa=-2.187 degrees ! Estimated noise=688.042 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215104 Jy ! Component: 100 - total flux cleaned = 0.028365 Jy ! Component: 150 - total flux cleaned = 0.0315163 Jy ! Component: 200 - total flux cleaned = 0.032903 Jy ! Total flux subtracted in 200 components = 0.032903 Jy ! Clean residual min=-0.004461 max=0.004388 Jy/beam ! Clean residual mean=-0.000026 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.288467 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 21 components and 0.288467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192669Jy sigma=0.001232 ! Fit after self-cal, rms=0.192669Jy sigma=0.001232 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.886 x 2.168 at -2.187 degrees (North through East) ! Clean map min=-0.0040216 max=0.25909 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00031 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.00 KP 0.99 ! LA 1.01 MK 1.03 NL 1.10 OV 0.98 ! PT 0.96 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.993547 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.00 KP 1.01 ! LA 0.99 MK 0.97 NL 1.18 OV 1.03 ! PT 0.90 SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.981308 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 1.00 KP 1.01 ! LA 0.97 MK 1.01 NL 1.19 OV 0.99 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.972676 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 1.04 KP 1.02 ! LA 0.99 MK 0.99 NL 1.15 OV 1.01 ! PT 1.00 SC 1.06 ! ! ! Fit before self-cal, rms=0.192669Jy sigma=0.001232 ! Fit after self-cal, rms=0.193758Jy sigma=0.001230 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193758Jy sigma=0.001230 ! Fit after self-cal, rms=0.193759Jy sigma=0.001230 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8921 mas, bmaj=2.182 mas, bpa=-2.296 degrees ! Estimated noise=670.871 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00620334 Jy ! Component: 100 - total flux cleaned = -0.0077998 Jy ! Component: 150 - total flux cleaned = -0.00794603 Jy ! Component: 200 - total flux cleaned = -0.00801516 Jy ! Total flux subtracted in 200 components = -0.00801516 Jy ! Clean residual min=-0.003133 max=0.002897 Jy/beam ! Clean residual mean=-0.000000 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.280452 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 32 components and 0.280452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193597Jy sigma=0.001229 ! Fit after self-cal, rms=0.193597Jy sigma=0.001229 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193597Jy sigma=0.001229 ! Fit after self-cal, rms=0.190114Jy sigma=0.001206 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114291 Jy ! Component: 100 - total flux cleaned = 0.000990237 Jy ! Component: 150 - total flux cleaned = 0.000938479 Jy ! Component: 200 - total flux cleaned = 0.000805328 Jy ! Total flux subtracted in 200 components = 0.000805328 Jy ! Clean residual min=-0.002868 max=0.002687 Jy/beam ! Clean residual mean=0.000000 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.281257 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.281257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190080Jy sigma=0.001206 ! Fit after self-cal, rms=0.189526Jy sigma=0.001202 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8921 x 2.182 at -2.296 degrees (North through East) ! Clean map min=-0.0026493 max=0.25597 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189526Jy sigma=0.001202 ! Fit after self-cal, rms=0.192462Jy sigma=0.001200 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192462Jy sigma=0.001200 ! Fit after self-cal, rms=0.192317Jy sigma=0.001199 ! Inverting map and beam ! Estimated beam: bmin=0.891 mas, bmaj=2.181 mas, bpa=-2.175 degrees ! Estimated noise=668.655 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000139719 Jy ! Component: 100 - total flux cleaned = -0.000173393 Jy ! Component: 150 - total flux cleaned = -0.000206007 Jy ! Component: 200 - total flux cleaned = -0.000266316 Jy ! Total flux subtracted in 200 components = -0.000266316 Jy ! Clean residual min=-0.002876 max=0.002311 Jy/beam ! Clean residual mean=0.000002 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.280991 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.280991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192309Jy sigma=0.001199 ! Fit after self-cal, rms=0.192262Jy sigma=0.001198 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192262Jy sigma=0.001198 ! Fit after self-cal, rms=0.192992Jy sigma=0.001197 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192992Jy sigma=0.001197 ! Fit after self-cal, rms=0.192980Jy sigma=0.001197 ! Inverting map and beam ! Estimated beam: bmin=0.8925 mas, bmaj=2.184 mas, bpa=-2.128 degrees ! Estimated noise=669.572 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.89395e-06 Jy ! Component: 100 - total flux cleaned = -3.08155e-05 Jy ! Component: 150 - total flux cleaned = -6.1077e-05 Jy ! Component: 200 - total flux cleaned = -9.31096e-05 Jy ! Total flux subtracted in 200 components = -9.31096e-05 Jy ! Clean residual min=-0.002890 max=0.002355 Jy/beam ! Clean residual mean=0.000001 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.280898 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.280898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192974Jy sigma=0.001197 ! Fit after self-cal, rms=0.192972Jy sigma=0.001197 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.377 mas, bmaj=3.638 mas, bpa=0.1687 degrees ! Estimated noise=878.916 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000578689 Jy ! Component: 100 - total flux cleaned = -0.000596551 Jy ! Component: 150 - total flux cleaned = -0.000597091 Jy ! Component: 200 - total flux cleaned = -0.000584227 Jy ! Total flux subtracted in 200 components = -0.000584227 Jy ! Clean residual min=-0.002658 max=0.002222 Jy/beam ! Clean residual mean=-0.000002 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.280314 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.280314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192975Jy sigma=0.001197 ! Fit after self-cal, rms=0.192976Jy sigma=0.001197 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7255 mas, bmaj=1.922 mas, bpa=-3.635 degrees ! Estimated noise=1076.91 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.217162 Jy ! Component: 100 - total flux cleaned = 0.257563 Jy ! Component: 150 - total flux cleaned = 0.273253 Jy ! Component: 200 - total flux cleaned = 0.279508 Jy ! Total flux subtracted in 200 components = 0.279508 Jy ! Clean residual min=-0.004416 max=0.004623 Jy/beam ! Clean residual mean=0.000003 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.279508 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.279508 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8925 mas, bmaj=2.184 mas, bpa=-2.128 degrees ! Estimated noise=669.572 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000730391 Jy ! Component: 100 - total flux cleaned = 0.000670269 Jy ! Component: 150 - total flux cleaned = 0.000674398 Jy ! Component: 200 - total flux cleaned = 0.000675599 Jy ! Total flux subtracted in 200 components = 0.000675599 Jy ! Clean residual min=-0.002986 max=0.002551 Jy/beam ! Clean residual mean=0.000000 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.280184 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 25 components and 0.280184 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.377 mas, bmaj=3.638 mas, bpa=0.1687 degrees ! Estimated noise=878.916 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000278342 Jy ! Component: 100 - total flux cleaned = -0.000212679 Jy ! Component: 150 - total flux cleaned = -0.000184995 Jy ! Component: 200 - total flux cleaned = -0.000134203 Jy ! Total flux subtracted in 200 components = -0.000134203 Jy ! Clean residual min=-0.002653 max=0.002256 Jy/beam ! Clean residual mean=-0.000003 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.28005 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 29 components and 0.28005 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8925 mas, bmaj=2.184 mas, bpa=-2.128 degrees ! Estimated noise=669.572 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000436659 Jy ! Component: 100 - total flux cleaned = 0.000471812 Jy ! Component: 150 - total flux cleaned = 0.000470293 Jy ! Component: 200 - total flux cleaned = 0.000500284 Jy ! Total flux subtracted in 200 components = 0.000500284 Jy ! Clean residual min=-0.002934 max=0.002496 Jy/beam ! Clean residual mean=0.000000 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.28055 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.28055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192994Jy sigma=0.001197 ! Fit after self-cal, rms=0.192997Jy sigma=0.001197 wmodel J2357-0152_X_1997_05_07_yyk\_map.mod ! Writing 33 model components to file: J2357-0152_X_1997_05_07_yyk_map.mod wobs J2357-0152_X_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J2357-0152_X_1997_05_07_yyk_uvs.fits wwins J2357-0152_X_1997_05_07_yyk\_map.win ! wwins: Wrote 1 windows to J2357-0152_X_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000822407 Jy ! Component: 100 - total flux cleaned = -0.000864907 Jy ! Component: 150 - total flux cleaned = -0.000699581 Jy ! Component: 200 - total flux cleaned = -0.000582394 Jy ! Component: 250 - total flux cleaned = -0.000545716 Jy ! Component: 300 - total flux cleaned = -0.000436586 Jy ! Component: 350 - total flux cleaned = -0.000507239 Jy ! Component: 400 - total flux cleaned = -0.00054081 Jy ! Component: 450 - total flux cleaned = -0.000506768 Jy ! Component: 500 - total flux cleaned = -0.000539105 Jy ! Component: 550 - total flux cleaned = -0.000603278 Jy ! Component: 600 - total flux cleaned = -0.000665966 Jy ! Component: 650 - total flux cleaned = -0.000758377 Jy ! Component: 700 - total flux cleaned = -0.000878842 Jy ! Component: 750 - total flux cleaned = -0.000996885 Jy ! Component: 800 - total flux cleaned = -0.00114125 Jy ! Component: 850 - total flux cleaned = -0.00119756 Jy ! Component: 900 - total flux cleaned = -0.00114226 Jy ! Component: 950 - total flux cleaned = -0.00127911 Jy ! Component: 1000 - total flux cleaned = -0.00133312 Jy ! Component: 1050 - total flux cleaned = -0.00135932 Jy ! Component: 1100 - total flux cleaned = -0.00146343 Jy ! Component: 1150 - total flux cleaned = -0.00151464 Jy ! Component: 1200 - total flux cleaned = -0.00151432 Jy ! Component: 1250 - total flux cleaned = -0.00151445 Jy ! Component: 1300 - total flux cleaned = -0.00161272 Jy ! Component: 1350 - total flux cleaned = -0.00166102 Jy ! Component: 1400 - total flux cleaned = -0.00161308 Jy ! Component: 1450 - total flux cleaned = -0.00161308 Jy ! Component: 1500 - total flux cleaned = -0.00147264 Jy ! Component: 1550 - total flux cleaned = -0.00142653 Jy ! Component: 1600 - total flux cleaned = -0.00147236 Jy ! Component: 1650 - total flux cleaned = -0.0013818 Jy ! Component: 1700 - total flux cleaned = -0.00127003 Jy ! Component: 1750 - total flux cleaned = -0.00129257 Jy ! Component: 1800 - total flux cleaned = -0.00122692 Jy ! Component: 1850 - total flux cleaned = -0.00124845 Jy ! Component: 1900 - total flux cleaned = -0.00116271 Jy ! Component: 1950 - total flux cleaned = -0.00107798 Jy ! Component: 2000 - total flux cleaned = -0.00101505 Jy ! Total flux subtracted in 2048 components = -0.00101518 Jy ! Clean residual min=-0.001084 max=0.001248 Jy/beam ! Clean residual mean=0.000000 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.279535 Jy keep ! Adding 135 model components to the UV plane model. ! The established model now contains 168 components and 0.279535 Jy ![Exited script file: muppet] wmap "J2357-0152_X_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8925 x 2.184 at -2.128 degrees (North through East) ! Clean map min=-0.0021521 max=0.2563 Jy/beam ! Writing clean map to FITS file: J2357-0152_X_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.256297 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000391798 device "J2357-0152_X_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J2357-0152_X_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.458606 0.458606 0.917211 1.83442 3.66884 7.33769 14.6754 29.3508 58.7015 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.256 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8925 x 2.184 at -2.128 degrees (North through East) ! Clean map min=-0.0021521 max=0.2563 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2357-0152_X_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J2357-0152_X_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2357-0152_X_1997_05_07_yyk_uvs.log closed on Mon Jan 8 10:57:24 2007