! Started logfile: J2354-0019_S_1997_05_07_yyk_uvs.log on Sun Jan 7 20:29:13 2007 obs J2354-0019_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J2354-0019_S_1997_05_07_yyk_uva.fits ! AN table 1: 147 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.976417 visibilities/baseline/integration-bin. ! Found source: J2354-0019 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 25836 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2354-0019_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.600963 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.797 mas, bmaj=7.326 mas, bpa=-5.711 degrees ! Estimated noise=1330.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.446867 Jy ! Component: 100 - total flux cleaned = 0.508255 Jy ! Total flux subtracted in 100 components = 0.508255 Jy ! Clean residual min=-0.017753 max=0.019481 Jy/beam ! Clean residual mean=0.000076 rms=0.004203 Jy/beam ! Combined flux in latest and established models = 0.508255 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.508255 Jy ! ! Correcting IF 1. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.283933Jy sigma=0.001237 ! Fit after self-cal, rms=0.283863Jy sigma=0.001236 ! Inverting map and beam ! Estimated beam: bmin=2.797 mas, bmaj=7.326 mas, bpa=-5.711 degrees ! Estimated noise=1330.56 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=8.589 mas, bpa=-5.025 degrees ! Estimated noise=940.595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00668038 Jy ! Component: 100 - total flux cleaned = 0.00815081 Jy ! Component: 150 - total flux cleaned = 0.00946642 Jy ! Component: 200 - total flux cleaned = 0.010625 Jy ! Total flux subtracted in 200 components = 0.010625 Jy ! Clean residual min=-0.010906 max=0.015493 Jy/beam ! Clean residual mean=0.000165 rms=0.003469 Jy/beam ! Combined flux in latest and established models = 0.51888 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.51888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282139Jy sigma=0.001231 ! Fit after self-cal, rms=0.282126Jy sigma=0.001231 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.554 x 8.589 at -5.025 degrees (North through East) ! Clean map min=-0.010633 max=0.50675 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.03431 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 HN 0.99 KP 0.89 ! LA 0.96 MK 0.99 NL 1.00* OV 1.09 ! PT 0.95 SC 0.80 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.978328 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.13 HN 1.09 KP 1.00 ! LA 1.07 MK 1.03 NL 1.02 OV 1.02 ! PT 0.93 SC 0.90 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.05661 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 HN 0.96 KP 0.90 ! LA 0.79 MK 0.86 NL 0.95 OV 0.96 ! PT 1.07 SC 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.985786 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.09 HN 1.08 KP 0.95 ! LA 0.87 MK 1.04 NL 1.12 OV 1.09 ! PT 0.92 SC 0.98 ! ! ! Fit before self-cal, rms=0.282126Jy sigma=0.001231 ! Fit after self-cal, rms=0.270404Jy sigma=0.001206 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270404Jy sigma=0.001206 ! Fit after self-cal, rms=0.270403Jy sigma=0.001206 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=8.356 mas, bpa=-3.47 degrees ! Estimated noise=946.589 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102067 Jy ! Component: 100 - total flux cleaned = 0.010775 Jy ! Component: 150 - total flux cleaned = 0.0108975 Jy ! Component: 200 - total flux cleaned = 0.010899 Jy ! Total flux subtracted in 200 components = 0.010899 Jy ! Clean residual min=-0.004530 max=0.005373 Jy/beam ! Clean residual mean=0.000005 rms=0.001247 Jy/beam ! Combined flux in latest and established models = 0.529779 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 0.529779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269976Jy sigma=0.001205 ! Fit after self-cal, rms=0.269967Jy sigma=0.001205 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269967Jy sigma=0.001205 ! Fit after self-cal, rms=0.267603Jy sigma=0.001194 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131266 Jy ! Component: 100 - total flux cleaned = 0.00105482 Jy ! Component: 150 - total flux cleaned = 0.000983018 Jy ! Component: 200 - total flux cleaned = 0.000914144 Jy ! Total flux subtracted in 200 components = 0.000914144 Jy ! Clean residual min=-0.004270 max=0.005023 Jy/beam ! Clean residual mean=0.000002 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.530694 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.530693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267529Jy sigma=0.001194 ! Fit after self-cal, rms=0.267146Jy sigma=0.001192 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.507 x 8.356 at -3.47 degrees (North through East) ! Clean map min=-0.0041568 max=0.51173 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267146Jy sigma=0.001192 ! Fit after self-cal, rms=0.261641Jy sigma=0.001181 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261641Jy sigma=0.001181 ! Fit after self-cal, rms=0.261551Jy sigma=0.001180 ! Inverting map and beam ! Estimated beam: bmin=3.493 mas, bmaj=8.315 mas, bpa=-3.255 degrees ! Estimated noise=943.124 mJy/beam. ! Added new window around map position (-2, -13). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330906 Jy ! Component: 100 - total flux cleaned = 0.00392773 Jy ! Component: 150 - total flux cleaned = 0.00382558 Jy ! Component: 200 - total flux cleaned = 0.00373962 Jy ! Total flux subtracted in 200 components = 0.00373962 Jy ! Clean residual min=-0.003750 max=0.003383 Jy/beam ! Clean residual mean=0.000001 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.534433 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 63 components and 0.534433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261447Jy sigma=0.001180 ! Fit after self-cal, rms=0.261421Jy sigma=0.001180 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261421Jy sigma=0.001180 ! Fit after self-cal, rms=0.261198Jy sigma=0.001178 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261198Jy sigma=0.001178 ! Fit after self-cal, rms=0.261188Jy sigma=0.001178 ! Inverting map and beam ! Estimated beam: bmin=3.491 mas, bmaj=8.295 mas, bpa=-3.13 degrees ! Estimated noise=942.976 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119537 Jy ! Component: 100 - total flux cleaned = 0.00112541 Jy ! Component: 150 - total flux cleaned = 0.00106332 Jy ! Component: 200 - total flux cleaned = 0.000955485 Jy ! Total flux subtracted in 200 components = 0.000955485 Jy ! Clean residual min=-0.003442 max=0.003238 Jy/beam ! Clean residual mean=0.000002 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.535388 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 80 components and 0.535389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261165Jy sigma=0.001178 ! Fit after self-cal, rms=0.261162Jy sigma=0.001178 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.026 mas, bmaj=12.59 mas, bpa=-1.451 degrees ! Estimated noise=1178.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00058938 Jy ! Component: 100 - total flux cleaned = 0.000500464 Jy ! Component: 150 - total flux cleaned = 0.000538246 Jy ! Component: 200 - total flux cleaned = 0.000571578 Jy ! Total flux subtracted in 200 components = 0.000571578 Jy ! Clean residual min=-0.003385 max=0.004015 Jy/beam ! Clean residual mean=-0.000006 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.53596 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 106 components and 0.53596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261157Jy sigma=0.001178 ! Fit after self-cal, rms=0.261156Jy sigma=0.001178 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.778 mas, bmaj=7.196 mas, bpa=-4.85 degrees ! Estimated noise=1327.89 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.447352 Jy ! Component: 100 - total flux cleaned = 0.509347 Jy ! Component: 150 - total flux cleaned = 0.528837 Jy ! Component: 200 - total flux cleaned = 0.533278 Jy ! Total flux subtracted in 200 components = 0.533278 Jy ! Clean residual min=-0.005927 max=0.006128 Jy/beam ! Clean residual mean=0.000032 rms=0.001748 Jy/beam ! Combined flux in latest and established models = 0.533278 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.533278 Jy ! Inverting map and beam ! Estimated beam: bmin=3.491 mas, bmaj=8.295 mas, bpa=-3.13 degrees ! Estimated noise=942.976 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00073519 Jy ! Component: 100 - total flux cleaned = 0.00089905 Jy ! Component: 150 - total flux cleaned = 0.00104738 Jy ! Component: 200 - total flux cleaned = 0.0011777 Jy ! Total flux subtracted in 200 components = 0.0011777 Jy ! Clean residual min=-0.004131 max=0.003590 Jy/beam ! Clean residual mean=0.000008 rms=0.001001 Jy/beam ! Combined flux in latest and established models = 0.534456 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 34 components and 0.534456 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.026 mas, bmaj=12.59 mas, bpa=-1.451 degrees ! Estimated noise=1178.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000113105 Jy ! Component: 100 - total flux cleaned = -0.000186772 Jy ! Component: 150 - total flux cleaned = -0.000130697 Jy ! Component: 200 - total flux cleaned = 2.57016e-05 Jy ! Total flux subtracted in 200 components = 2.57016e-05 Jy ! Clean residual min=-0.003653 max=0.003885 Jy/beam ! Clean residual mean=0.000005 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.534481 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 60 components and 0.534481 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.491 mas, bmaj=8.295 mas, bpa=-3.13 degrees ! Estimated noise=942.976 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000153967 Jy ! Component: 100 - total flux cleaned = -0.000152543 Jy ! Component: 150 - total flux cleaned = -5.61045e-05 Jy ! Component: 200 - total flux cleaned = 3.39008e-05 Jy ! Total flux subtracted in 200 components = 3.39008e-05 Jy ! Clean residual min=-0.003754 max=0.003379 Jy/beam ! Clean residual mean=0.000005 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.534515 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 68 components and 0.534515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261216Jy sigma=0.001178 ! Fit after self-cal, rms=0.261213Jy sigma=0.001178 wmodel J2354-0019_S_1997_05_07_yyk\_map.mod ! Writing 68 model components to file: J2354-0019_S_1997_05_07_yyk_map.mod wobs J2354-0019_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J2354-0019_S_1997_05_07_yyk_uvs.fits wwins J2354-0019_S_1997_05_07_yyk\_map.win ! wwins: Wrote 2 windows to J2354-0019_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00166492 Jy ! Component: 100 - total flux cleaned = -0.00291434 Jy ! Component: 150 - total flux cleaned = -0.00359015 Jy ! Component: 200 - total flux cleaned = -0.00383836 Jy ! Component: 250 - total flux cleaned = -0.00374352 Jy ! Component: 300 - total flux cleaned = -0.00347206 Jy ! Component: 350 - total flux cleaned = -0.0032528 Jy ! Component: 400 - total flux cleaned = -0.00303996 Jy ! Component: 450 - total flux cleaned = -0.00287388 Jy ! Component: 500 - total flux cleaned = -0.00287292 Jy ! Component: 550 - total flux cleaned = -0.00271449 Jy ! Component: 600 - total flux cleaned = -0.00271532 Jy ! Component: 650 - total flux cleaned = -0.00256499 Jy ! Component: 700 - total flux cleaned = -0.00260186 Jy ! Component: 750 - total flux cleaned = -0.00249203 Jy ! Component: 800 - total flux cleaned = -0.0024924 Jy ! Component: 850 - total flux cleaned = -0.00245742 Jy ! Component: 900 - total flux cleaned = -0.00245788 Jy ! Component: 950 - total flux cleaned = -0.00239013 Jy ! Component: 1000 - total flux cleaned = -0.00232361 Jy ! Component: 1050 - total flux cleaned = -0.00219249 Jy ! Component: 1100 - total flux cleaned = -0.00199989 Jy ! Component: 1150 - total flux cleaned = -0.00199973 Jy ! Component: 1200 - total flux cleaned = -0.00178193 Jy ! Component: 1250 - total flux cleaned = -0.00169038 Jy ! Component: 1300 - total flux cleaned = -0.0016905 Jy ! Component: 1350 - total flux cleaned = -0.00166043 Jy ! Component: 1400 - total flux cleaned = -0.00163073 Jy ! Component: 1450 - total flux cleaned = -0.00160142 Jy ! Component: 1500 - total flux cleaned = -0.0016008 Jy ! Component: 1550 - total flux cleaned = -0.00148671 Jy ! Component: 1600 - total flux cleaned = -0.00140249 Jy ! Component: 1650 - total flux cleaned = -0.0013196 Jy ! Component: 1700 - total flux cleaned = -0.001265 Jy ! Component: 1750 - total flux cleaned = -0.00110227 Jy ! Component: 1800 - total flux cleaned = -0.00112908 Jy ! Component: 1850 - total flux cleaned = -0.00096965 Jy ! Component: 1900 - total flux cleaned = -0.000786244 Jy ! Component: 1950 - total flux cleaned = -0.000734552 Jy ! Component: 2000 - total flux cleaned = -0.000554455 Jy ! Total flux subtracted in 2048 components = -0.000477941 Jy ! Clean residual min=-0.001408 max=0.001566 Jy/beam ! Clean residual mean=0.000006 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.534037 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 202 components and 0.534037 Jy ![Exited script file: muppet] wmap "J2354-0019_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.491 x 8.295 at -3.13 degrees (North through East) ! Clean map min=-0.0030621 max=0.51151 Jy/beam ! Writing clean map to FITS file: J2354-0019_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.51151 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000502279 device "J2354-0019_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J2354-0019_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.294586 0.294586 0.589172 1.17834 2.35669 4.71338 9.42676 18.8535 37.707 75.4141 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.511 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.491 x 8.295 at -3.13 degrees (North through East) ! Clean map min=-0.0030621 max=0.51151 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2354-0019_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J2354-0019_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2354-0019_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 20:29:21 2007