! Started logfile: J2348-1631_S_1997_07_02_yyk_uvs.log on Sun Jan 7 20:28:31 2007 obs J2348-1631_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J2348-1631_S_1997_07_02_yyk_uva.fits ! AN table 1: 147 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.998488 visibilities/baseline/integration-bin. ! Found source: J2348-1631 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 754 lines of history. ! ! Reading 26420 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2348-1631_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 3.06073 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.857 mas, bmaj=7.812 mas, bpa=-9.987 degrees ! Estimated noise=1734.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.51315 Jy ! Component: 100 - total flux cleaned = 2.93314 Jy ! Total flux subtracted in 100 components = 2.93314 Jy ! Clean residual min=-0.080060 max=0.115976 Jy/beam ! Clean residual mean=0.000602 rms=0.028684 Jy/beam ! Combined flux in latest and established models = 2.93314 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 2.93314 Jy ! ! Correcting IF 1. ! A total of 441 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.583130Jy sigma=0.002630 ! Fit after self-cal, rms=0.580829Jy sigma=0.002620 ! Inverting map and beam ! Estimated beam: bmin=2.858 mas, bmaj=7.813 mas, bpa=-9.987 degrees ! Estimated noise=1734.49 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=9.422 mas, bpa=-11.29 degrees ! Estimated noise=1082.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.138384 Jy ! Component: 100 - total flux cleaned = 0.170061 Jy ! Component: 150 - total flux cleaned = 0.171486 Jy ! Component: 200 - total flux cleaned = 0.172659 Jy ! Total flux subtracted in 200 components = 0.172659 Jy ! Clean residual min=-0.069391 max=0.101278 Jy/beam ! Clean residual mean=0.001620 rms=0.024806 Jy/beam ! Combined flux in latest and established models = 3.1058 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 18 components and 3.1058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.544699Jy sigma=0.002489 ! Fit after self-cal, rms=0.543934Jy sigma=0.002488 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.608 x 9.422 at -11.29 degrees (North through East) ! Clean map min=-0.067464 max=2.9146 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02371 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.11 HN 0.91 KP 0.89 ! LA 0.99 MK 1.00 NL 1.00* OV 1.09 ! PT 0.96 SC 0.84 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.983791 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.16 HN 1.00 KP 0.95 ! LA 1.09 MK 1.04 NL 0.97 OV 1.05 ! PT 0.94 SC 0.92 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.03775 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.09 HN 0.94 KP 0.92 ! LA 0.81 MK 0.88 NL 0.94 OV 0.95 ! PT 1.08 SC 1.04 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.986475 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.13 HN 1.14 KP 0.95 ! LA 0.90 MK 1.05 NL 1.05 OV 0.95 ! PT 0.93 SC 1.03 ! ! ! Fit before self-cal, rms=0.543934Jy sigma=0.002488 ! Fit after self-cal, rms=0.410472Jy sigma=0.001894 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.410472Jy sigma=0.001894 ! Fit after self-cal, rms=0.410453Jy sigma=0.001894 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.58 mas, bmaj=9.273 mas, bpa=-10.57 degrees ! Estimated noise=1082 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0532694 Jy ! Component: 100 - total flux cleaned = 0.0609113 Jy ! Component: 150 - total flux cleaned = 0.0617537 Jy ! Component: 200 - total flux cleaned = 0.0625346 Jy ! Total flux subtracted in 200 components = 0.0625346 Jy ! Clean residual min=-0.017978 max=0.026481 Jy/beam ! Clean residual mean=-0.000019 rms=0.005638 Jy/beam ! Combined flux in latest and established models = 3.16833 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 46 components and 3.16833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.404499Jy sigma=0.001862 ! Fit after self-cal, rms=0.404138Jy sigma=0.001860 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.404138Jy sigma=0.001860 ! Fit after self-cal, rms=0.379481Jy sigma=0.001765 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16, 58). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0218814 Jy ! Component: 100 - total flux cleaned = 0.0240428 Jy ! Component: 150 - total flux cleaned = 0.0239872 Jy ! Component: 200 - total flux cleaned = 0.0233838 Jy ! Total flux subtracted in 200 components = 0.0233838 Jy ! Clean residual min=-0.019535 max=0.017530 Jy/beam ! Clean residual mean=-0.000070 rms=0.004999 Jy/beam ! Combined flux in latest and established models = 3.19171 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 72 components and 3.19171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.376223Jy sigma=0.001753 ! Fit after self-cal, rms=0.372582Jy sigma=0.001737 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.58 x 9.273 at -10.57 degrees (North through East) ! Clean map min=-0.01657 max=2.9294 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.372582Jy sigma=0.001737 ! Fit after self-cal, rms=0.333728Jy sigma=0.001570 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333728Jy sigma=0.001570 ! Fit after self-cal, rms=0.332598Jy sigma=0.001564 ! Inverting map and beam ! Estimated beam: bmin=3.572 mas, bmaj=9.256 mas, bpa=-10.63 degrees ! Estimated noise=1078.18 mJy/beam. ! Added new window around map position (53, 57). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182219 Jy ! Component: 100 - total flux cleaned = 0.0166771 Jy ! Component: 150 - total flux cleaned = 0.0149331 Jy ! Component: 200 - total flux cleaned = 0.013376 Jy ! Total flux subtracted in 200 components = 0.013376 Jy ! Clean residual min=-0.009791 max=0.012960 Jy/beam ! Clean residual mean=-0.000020 rms=0.003166 Jy/beam ! Combined flux in latest and established models = 3.20509 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 102 components and 3.20509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.331027Jy sigma=0.001557 ! Fit after self-cal, rms=0.330431Jy sigma=0.001554 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330431Jy sigma=0.001554 ! Fit after self-cal, rms=0.329538Jy sigma=0.001551 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.329538Jy sigma=0.001551 ! Fit after self-cal, rms=0.329280Jy sigma=0.001549 ! Inverting map and beam ! Estimated beam: bmin=3.566 mas, bmaj=9.254 mas, bpa=-10.71 degrees ! Estimated noise=1077.94 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0076159 Jy ! Component: 100 - total flux cleaned = 0.00656442 Jy ! Component: 150 - total flux cleaned = 0.00495692 Jy ! Component: 200 - total flux cleaned = 0.00406405 Jy ! Total flux subtracted in 200 components = 0.00406405 Jy ! Clean residual min=-0.008877 max=0.011221 Jy/beam ! Clean residual mean=-0.000025 rms=0.002775 Jy/beam ! Combined flux in latest and established models = 3.20915 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 123 components and 3.20915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.328615Jy sigma=0.001546 ! Fit after self-cal, rms=0.328432Jy sigma=0.001545 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.999 mas, bmaj=16.45 mas, bpa=-11.13 degrees ! Estimated noise=1334.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00504585 Jy ! Component: 100 - total flux cleaned = -0.00831288 Jy ! Component: 150 - total flux cleaned = -0.0103473 Jy ! Component: 200 - total flux cleaned = -0.0120734 Jy ! Total flux subtracted in 200 components = -0.0120734 Jy ! Clean residual min=-0.009591 max=0.010693 Jy/beam ! Clean residual mean=-0.000038 rms=0.003239 Jy/beam ! Combined flux in latest and established models = 3.19708 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 147 components and 3.19708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.328374Jy sigma=0.001545 ! Fit after self-cal, rms=0.328225Jy sigma=0.001544 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.84 mas, bmaj=7.759 mas, bpa=-9.809 degrees ! Estimated noise=1710.25 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.48177 Jy ! Component: 100 - total flux cleaned = 2.91801 Jy ! Component: 150 - total flux cleaned = 3.07925 Jy ! Component: 200 - total flux cleaned = 3.15825 Jy ! Total flux subtracted in 200 components = 3.15825 Jy ! Clean residual min=-0.026666 max=0.029497 Jy/beam ! Clean residual mean=-0.000009 rms=0.007956 Jy/beam ! Combined flux in latest and established models = 3.15825 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 3.15825 Jy ! Inverting map and beam ! Estimated beam: bmin=3.566 mas, bmaj=9.254 mas, bpa=-10.71 degrees ! Estimated noise=1077.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0356203 Jy ! Component: 100 - total flux cleaned = 0.0442418 Jy ! Component: 150 - total flux cleaned = 0.0478168 Jy ! Component: 200 - total flux cleaned = 0.0492879 Jy ! Total flux subtracted in 200 components = 0.0492879 Jy ! Clean residual min=-0.012210 max=0.015536 Jy/beam ! Clean residual mean=0.000010 rms=0.003956 Jy/beam ! Combined flux in latest and established models = 3.20754 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 47 components and 3.20754 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.999 mas, bmaj=16.45 mas, bpa=-11.13 degrees ! Estimated noise=1334.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00228807 Jy ! Component: 100 - total flux cleaned = -0.00489047 Jy ! Component: 150 - total flux cleaned = -0.00643965 Jy ! Component: 200 - total flux cleaned = -0.00714441 Jy ! Total flux subtracted in 200 components = -0.00714441 Jy ! Clean residual min=-0.012362 max=0.012080 Jy/beam ! Clean residual mean=0.000024 rms=0.003864 Jy/beam ! Combined flux in latest and established models = 3.2004 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 80 components and 3.2004 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.566 mas, bmaj=9.254 mas, bpa=-10.71 degrees ! Estimated noise=1077.94 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000635592 Jy ! Component: 100 - total flux cleaned = -0.000155742 Jy ! Component: 150 - total flux cleaned = 0.000315697 Jy ! Component: 200 - total flux cleaned = 0.000747815 Jy ! Total flux subtracted in 200 components = 0.000747815 Jy ! Clean residual min=-0.009463 max=0.012728 Jy/beam ! Clean residual mean=0.000003 rms=0.003118 Jy/beam ! Combined flux in latest and established models = 3.20115 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 102 components and 3.20115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.329548Jy sigma=0.001549 ! Fit after self-cal, rms=0.329355Jy sigma=0.001549 wmodel J2348-1631_S_1997_07_02_yyk\_map.mod ! Writing 102 model components to file: J2348-1631_S_1997_07_02_yyk_map.mod wobs J2348-1631_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J2348-1631_S_1997_07_02_yyk_uvs.fits wwins J2348-1631_S_1997_07_02_yyk\_map.win ! wwins: Wrote 4 windows to J2348-1631_S_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00509918 Jy ! Component: 100 - total flux cleaned = 0.00620354 Jy ! Component: 150 - total flux cleaned = 0.00637036 Jy ! Component: 200 - total flux cleaned = 0.00653074 Jy ! Component: 250 - total flux cleaned = 0.00593765 Jy ! Component: 300 - total flux cleaned = 0.00580028 Jy ! Component: 350 - total flux cleaned = 0.00580127 Jy ! Component: 400 - total flux cleaned = 0.00645355 Jy ! Component: 450 - total flux cleaned = 0.00683668 Jy ! Component: 500 - total flux cleaned = 0.0072059 Jy ! Component: 550 - total flux cleaned = 0.00732631 Jy ! Component: 600 - total flux cleaned = 0.00732746 Jy ! Component: 650 - total flux cleaned = 0.00744368 Jy ! Component: 700 - total flux cleaned = 0.00699729 Jy ! Component: 750 - total flux cleaned = 0.00700019 Jy ! Component: 800 - total flux cleaned = 0.00678635 Jy ! Component: 850 - total flux cleaned = 0.00647546 Jy ! Component: 900 - total flux cleaned = 0.00627442 Jy ! Component: 950 - total flux cleaned = 0.00647329 Jy ! Component: 1000 - total flux cleaned = 0.00617735 Jy ! Component: 1050 - total flux cleaned = 0.0063681 Jy ! Component: 1100 - total flux cleaned = 0.00599354 Jy ! Component: 1150 - total flux cleaned = 0.00645576 Jy ! Component: 1200 - total flux cleaned = 0.00627631 Jy ! Component: 1250 - total flux cleaned = 0.00663478 Jy ! Component: 1300 - total flux cleaned = 0.00698589 Jy ! Component: 1350 - total flux cleaned = 0.00724459 Jy ! Component: 1400 - total flux cleaned = 0.00766596 Jy ! Component: 1450 - total flux cleaned = 0.00799795 Jy ! Component: 1500 - total flux cleaned = 0.00816073 Jy ! Component: 1550 - total flux cleaned = 0.00856344 Jy ! Component: 1600 - total flux cleaned = 0.00888061 Jy ! Component: 1650 - total flux cleaned = 0.00919283 Jy ! Component: 1700 - total flux cleaned = 0.00927094 Jy ! Component: 1750 - total flux cleaned = 0.00957412 Jy ! Component: 1800 - total flux cleaned = 0.00987133 Jy ! Component: 1850 - total flux cleaned = 0.0102383 Jy ! Component: 1900 - total flux cleaned = 0.0104568 Jy ! Component: 1950 - total flux cleaned = 0.0108133 Jy ! Component: 2000 - total flux cleaned = 0.0109553 Jy ! Total flux subtracted in 2048 components = 0.0113028 Jy ! Clean residual min=-0.003832 max=0.003508 Jy/beam ! Clean residual mean=-0.000012 rms=0.001448 Jy/beam ! Combined flux in latest and established models = 3.21245 Jy keep ! Adding 122 model components to the UV plane model. ! The established model now contains 221 components and 3.21245 Jy ![Exited script file: muppet] wmap "J2348-1631_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.566 x 9.254 at -10.71 degrees (North through East) ! Clean map min=-0.010552 max=2.9155 Jy/beam ! Writing clean map to FITS file: J2348-1631_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.91554 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00144385 device "J2348-1631_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J2348-1631_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.148568 0.148568 0.297136 0.594272 1.18854 2.37709 4.75417 9.50835 19.0167 38.0334 76.0668 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0043 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.915 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.566 x 9.254 at -10.71 degrees (North through East) ! Clean map min=-0.010552 max=2.9155 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2348-1631_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J2348-1631_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2348-1631_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 20:28:38 2007