! Started logfile: J2337-0230_S_1997_05_07_yyk_uvs.log on Sun Jan 7 20:26:43 2007 obs J2337-0230_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J2337-0230_S_1997_05_07_yyk_uva.fits ! AN table 1: 149 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.985384 visibilities/baseline/integration-bin. ! Found source: J2337-0230 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 26428 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2337-0230_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.518235 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.821 mas, bmaj=7.076 mas, bpa=-4.958 degrees ! Estimated noise=1585.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.35308 Jy ! Component: 100 - total flux cleaned = 0.439883 Jy ! Total flux subtracted in 100 components = 0.439883 Jy ! Clean residual min=-0.013525 max=0.024607 Jy/beam ! Clean residual mean=0.000226 rms=0.004547 Jy/beam ! Combined flux in latest and established models = 0.439883 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.439883 Jy ! ! Correcting IF 1. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.287105Jy sigma=0.001250 ! Fit after self-cal, rms=0.286958Jy sigma=0.001249 ! Inverting map and beam ! Estimated beam: bmin=2.821 mas, bmaj=7.076 mas, bpa=-4.958 degrees ! Estimated noise=1585.15 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.508 mas, bmaj=8.596 mas, bpa=-5.092 degrees ! Estimated noise=942.055 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0493364 Jy ! Component: 100 - total flux cleaned = 0.0739196 Jy ! Component: 150 - total flux cleaned = 0.0885694 Jy ! Component: 200 - total flux cleaned = 0.097958 Jy ! Total flux subtracted in 200 components = 0.097958 Jy ! Clean residual min=-0.010783 max=0.011628 Jy/beam ! Clean residual mean=0.000234 rms=0.002964 Jy/beam ! Combined flux in latest and established models = 0.537841 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 54 model components to the UV plane model. ! The established model now contains 62 components and 0.537841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.280817Jy sigma=0.001218 ! Fit after self-cal, rms=0.280528Jy sigma=0.001217 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.508 x 8.596 at -5.092 degrees (North through East) ! Clean map min=-0.0081756 max=0.403 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02683 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.96 KP 0.92 ! LA 0.99 MK 0.99 NL 1.00* OV 1.08 ! PT 0.93 SC 0.86 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.974097 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.08 HN 1.12 KP 1.01 ! LA 1.11 MK 1.02 NL 1.01 OV 1.00 ! PT 0.93 SC 0.95 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.05734 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 0.95 KP 0.91 ! LA 0.82 MK 0.85 NL 0.96 OV 0.93 ! PT 1.06 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.991504 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.08 HN 1.05 KP 0.96 ! LA 0.89 MK 0.98 NL 1.13 OV 1.10 ! PT 0.90 SC 1.01 ! ! ! Fit before self-cal, rms=0.280528Jy sigma=0.001217 ! Fit after self-cal, rms=0.273607Jy sigma=0.001204 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273607Jy sigma=0.001204 ! Fit after self-cal, rms=0.273603Jy sigma=0.001204 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.463 mas, bmaj=8.49 mas, bpa=-4.878 degrees ! Estimated noise=944.959 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.5, 19.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142796 Jy ! Component: 100 - total flux cleaned = 0.0217422 Jy ! Component: 150 - total flux cleaned = 0.0230722 Jy ! Component: 200 - total flux cleaned = 0.0232684 Jy ! Total flux subtracted in 200 components = 0.0232684 Jy ! Clean residual min=-0.004460 max=0.005887 Jy/beam ! Clean residual mean=0.000032 rms=0.001410 Jy/beam ! Combined flux in latest and established models = 0.561109 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 95 components and 0.561109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272926Jy sigma=0.001201 ! Fit after self-cal, rms=0.272854Jy sigma=0.001201 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272854Jy sigma=0.001201 ! Fit after self-cal, rms=0.270751Jy sigma=0.001192 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371672 Jy ! Component: 100 - total flux cleaned = 0.00476903 Jy ! Component: 150 - total flux cleaned = 0.00538478 Jy ! Component: 200 - total flux cleaned = 0.00565356 Jy ! Total flux subtracted in 200 components = 0.00565356 Jy ! Clean residual min=-0.004176 max=0.004717 Jy/beam ! Clean residual mean=0.000018 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 0.566763 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 114 components and 0.566763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270546Jy sigma=0.001192 ! Fit after self-cal, rms=0.270332Jy sigma=0.001191 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.463 x 8.49 at -4.878 degrees (North through East) ! Clean map min=-0.004185 max=0.40457 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270332Jy sigma=0.001191 ! Fit after self-cal, rms=0.264095Jy sigma=0.001182 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264095Jy sigma=0.001182 ! Fit after self-cal, rms=0.264054Jy sigma=0.001182 ! Inverting map and beam ! Estimated beam: bmin=3.447 mas, bmaj=8.44 mas, bpa=-4.76 degrees ! Estimated noise=939.029 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324292 Jy ! Component: 100 - total flux cleaned = 0.00390163 Jy ! Component: 150 - total flux cleaned = 0.0039028 Jy ! Component: 200 - total flux cleaned = 0.0039072 Jy ! Total flux subtracted in 200 components = 0.0039072 Jy ! Clean residual min=-0.003448 max=0.003914 Jy/beam ! Clean residual mean=0.000018 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.57067 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 147 components and 0.57067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263949Jy sigma=0.001182 ! Fit after self-cal, rms=0.263928Jy sigma=0.001182 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263928Jy sigma=0.001182 ! Fit after self-cal, rms=0.263574Jy sigma=0.001180 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263574Jy sigma=0.001180 ! Fit after self-cal, rms=0.263572Jy sigma=0.001180 ! Inverting map and beam ! Estimated beam: bmin=3.441 mas, bmaj=8.427 mas, bpa=-4.762 degrees ! Estimated noise=938.498 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218314 Jy ! Component: 100 - total flux cleaned = 0.00247429 Jy ! Component: 150 - total flux cleaned = 0.00264866 Jy ! Component: 200 - total flux cleaned = 0.00272861 Jy ! Total flux subtracted in 200 components = 0.00272861 Jy ! Clean residual min=-0.003170 max=0.003707 Jy/beam ! Clean residual mean=0.000013 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.573399 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 48 model components to the UV plane model. ! The established model now contains 166 components and 0.573399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263509Jy sigma=0.001180 ! Fit after self-cal, rms=0.263505Jy sigma=0.001180 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.979 mas, bmaj=13.02 mas, bpa=-1.146 degrees ! Estimated noise=1176.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151754 Jy ! Component: 100 - total flux cleaned = 0.00184423 Jy ! Component: 150 - total flux cleaned = 0.00180713 Jy ! Component: 200 - total flux cleaned = 0.00177209 Jy ! Total flux subtracted in 200 components = 0.00177209 Jy ! Clean residual min=-0.002968 max=0.003609 Jy/beam ! Clean residual mean=0.000017 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.575171 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 195 components and 0.575171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263485Jy sigma=0.001180 ! Fit after self-cal, rms=0.263482Jy sigma=0.001180 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.786 mas, bmaj=6.999 mas, bpa=-4.797 degrees ! Estimated noise=1572.69 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.353197 Jy ! Component: 100 - total flux cleaned = 0.442909 Jy ! Component: 150 - total flux cleaned = 0.478965 Jy ! Component: 200 - total flux cleaned = 0.501361 Jy ! Total flux subtracted in 200 components = 0.501361 Jy ! Clean residual min=-0.007740 max=0.009464 Jy/beam ! Clean residual mean=0.000085 rms=0.002431 Jy/beam ! Combined flux in latest and established models = 0.501361 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.501361 Jy ! Inverting map and beam ! Estimated beam: bmin=3.441 mas, bmaj=8.427 mas, bpa=-4.762 degrees ! Estimated noise=938.498 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0277795 Jy ! Component: 100 - total flux cleaned = 0.0442179 Jy ! Component: 150 - total flux cleaned = 0.0549743 Jy ! Component: 200 - total flux cleaned = 0.062255 Jy ! Total flux subtracted in 200 components = 0.062255 Jy ! Clean residual min=-0.004152 max=0.003943 Jy/beam ! Clean residual mean=0.000037 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.563616 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 103 components and 0.563616 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.979 mas, bmaj=13.02 mas, bpa=-1.146 degrees ! Estimated noise=1176.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00655296 Jy ! Component: 100 - total flux cleaned = 0.00983181 Jy ! Component: 150 - total flux cleaned = 0.0105521 Jy ! Component: 200 - total flux cleaned = 0.0108399 Jy ! Total flux subtracted in 200 components = 0.0108399 Jy ! Clean residual min=-0.003528 max=0.003754 Jy/beam ! Clean residual mean=0.000014 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.574455 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 156 components and 0.574455 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.441 mas, bmaj=8.427 mas, bpa=-4.762 degrees ! Estimated noise=938.498 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00200065 Jy ! Component: 100 - total flux cleaned = -0.00171761 Jy ! Component: 150 - total flux cleaned = -0.00124186 Jy ! Component: 200 - total flux cleaned = -0.00102821 Jy ! Total flux subtracted in 200 components = -0.00102821 Jy ! Clean residual min=-0.003039 max=0.003034 Jy/beam ! Clean residual mean=0.000015 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.573427 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 172 components and 0.573427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263516Jy sigma=0.001180 ! Fit after self-cal, rms=0.263504Jy sigma=0.001180 wmodel J2337-0230_S_1997_05_07_yyk\_map.mod ! Writing 172 model components to file: J2337-0230_S_1997_05_07_yyk_map.mod wobs J2337-0230_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J2337-0230_S_1997_05_07_yyk_uvs.fits wwins J2337-0230_S_1997_05_07_yyk\_map.win ! wwins: Wrote 3 windows to J2337-0230_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.81878e-05 Jy ! Component: 100 - total flux cleaned = 0.000263746 Jy ! Component: 150 - total flux cleaned = 0.000463373 Jy ! Component: 200 - total flux cleaned = 0.00051087 Jy ! Component: 250 - total flux cleaned = 0.000697591 Jy ! Component: 300 - total flux cleaned = 0.000743621 Jy ! Component: 350 - total flux cleaned = 0.000745226 Jy ! Component: 400 - total flux cleaned = 0.000658234 Jy ! Component: 450 - total flux cleaned = 0.000530965 Jy ! Component: 500 - total flux cleaned = 0.000448425 Jy ! Component: 550 - total flux cleaned = 0.000325972 Jy ! Component: 600 - total flux cleaned = 0.000286997 Jy ! Component: 650 - total flux cleaned = 0.000366122 Jy ! Component: 700 - total flux cleaned = 0.000327853 Jy ! Component: 750 - total flux cleaned = 0.000328593 Jy ! Component: 800 - total flux cleaned = 0.000441429 Jy ! Component: 850 - total flux cleaned = 0.000441915 Jy ! Component: 900 - total flux cleaned = 0.000551201 Jy ! Component: 950 - total flux cleaned = 0.000515498 Jy ! Component: 1000 - total flux cleaned = 0.000515655 Jy ! Component: 1050 - total flux cleaned = 0.000446066 Jy ! Component: 1100 - total flux cleaned = 0.000411479 Jy ! Component: 1150 - total flux cleaned = 0.000277447 Jy ! Component: 1200 - total flux cleaned = 0.000244045 Jy ! Component: 1250 - total flux cleaned = 0.00017886 Jy ! Component: 1300 - total flux cleaned = 0.00011481 Jy ! Component: 1350 - total flux cleaned = 5.18798e-05 Jy ! Component: 1400 - total flux cleaned = 0.000177418 Jy ! Component: 1450 - total flux cleaned = 8.41173e-05 Jy ! Component: 1500 - total flux cleaned = 5.32314e-05 Jy ! Component: 1550 - total flux cleaned = -3.74035e-05 Jy ! Component: 1600 - total flux cleaned = -6.70327e-05 Jy ! Component: 1650 - total flux cleaned = -0.000154823 Jy ! Component: 1700 - total flux cleaned = -6.75412e-05 Jy ! Component: 1750 - total flux cleaned = -0.000125473 Jy ! Component: 1800 - total flux cleaned = -9.72396e-05 Jy ! Component: 1850 - total flux cleaned = -0.000125622 Jy ! Component: 1900 - total flux cleaned = -0.000153827 Jy ! Component: 1950 - total flux cleaned = -0.000263993 Jy ! Component: 2000 - total flux cleaned = -0.000317918 Jy ! Total flux subtracted in 2048 components = -0.00029123 Jy ! Clean residual min=-0.001506 max=0.001332 Jy/beam ! Clean residual mean=-0.000007 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.573136 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 302 components and 0.573136 Jy ![Exited script file: muppet] wmap "J2337-0230_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.441 x 8.427 at -4.762 degrees (North through East) ! Clean map min=-0.0029569 max=0.40322 Jy/beam ! Writing clean map to FITS file: J2337-0230_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.403219 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000523347 device "J2337-0230_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J2337-0230_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.389377 0.389377 0.778753 1.55751 3.11501 6.23003 12.4601 24.9201 49.8402 99.6804 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.403 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.441 x 8.427 at -4.762 degrees (North through East) ! Clean map min=-0.0029569 max=0.40322 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2337-0230_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J2337-0230_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2337-0230_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 20:26:52 2007