! Started logfile: J2335-2907_X_1997_08_27_yyk_uvs.log on Mon Jan 8 10:54:07 2007 obs J2335-2907_X_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J2335-2907_X_1997_08_27_yyk_uva.fits ! AN table 1: 107 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.421807 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2335-2907 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 702 lines of history. ! ! Reading 8124 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2335-2907_X_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.317062 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.094 mas, bmaj=2.961 mas, bpa=-3.854 degrees ! Estimated noise=2846.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0836435 Jy ! Component: 100 - total flux cleaned = 0.0865952 Jy ! Total flux subtracted in 100 components = 0.0865952 Jy ! Clean residual min=-0.023029 max=0.035784 Jy/beam ! Clean residual mean=-0.000237 rms=0.007258 Jy/beam ! Combined flux in latest and established models = 0.0865952 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0865952 Jy ! ! Correcting IF 1. ! A total of 396 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 474 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 396 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 396 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.292174Jy sigma=0.001340 ! Fit after self-cal, rms=0.290574Jy sigma=0.001332 ! Inverting map and beam ! Estimated beam: bmin=1.094 mas, bmaj=2.961 mas, bpa=-3.854 degrees ! Estimated noise=2846.79 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.163 mas, bmaj=3.955 mas, bpa=2.518 degrees ! Estimated noise=1593.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0549458 Jy ! Component: 100 - total flux cleaned = 0.0680635 Jy ! Component: 150 - total flux cleaned = 0.0699437 Jy ! Component: 200 - total flux cleaned = 0.070171 Jy ! Total flux subtracted in 200 components = 0.070171 Jy ! Clean residual min=-0.015192 max=0.023848 Jy/beam ! Clean residual mean=-0.000541 rms=0.005560 Jy/beam ! Combined flux in latest and established models = 0.156766 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 32 components and 0.156766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285681Jy sigma=0.001293 ! Fit after self-cal, rms=0.285656Jy sigma=0.001293 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.163 x 3.955 at 2.518 degrees (North through East) ! Clean map min=-0.01493 max=0.1417 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 84 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 84 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02052 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.08 KP 0.99 ! LA 0.92 MK 1.00* NL 0.92 OV 1.00 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 3. ! A total of 84 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.285656Jy sigma=0.001293 ! Fit after self-cal, rms=0.278805Jy sigma=0.001281 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278805Jy sigma=0.001281 ! Fit after self-cal, rms=0.278702Jy sigma=0.001281 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.163 mas, bmaj=4.068 mas, bpa=2.954 degrees ! Estimated noise=1597.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177468 Jy ! Component: 100 - total flux cleaned = -0.000377516 Jy ! Component: 150 - total flux cleaned = -0.000553815 Jy ! Component: 200 - total flux cleaned = -0.000631264 Jy ! Total flux subtracted in 200 components = -0.000631264 Jy ! Clean residual min=-0.013436 max=0.020735 Jy/beam ! Clean residual mean=-0.000474 rms=0.004574 Jy/beam ! Combined flux in latest and established models = 0.156135 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.156135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278677Jy sigma=0.001280 ! Fit after self-cal, rms=0.278669Jy sigma=0.001280 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278669Jy sigma=0.001280 ! Fit after self-cal, rms=0.276671Jy sigma=0.001270 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.2, 1.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168415 Jy ! Component: 100 - total flux cleaned = 0.0175654 Jy ! Component: 150 - total flux cleaned = 0.0164673 Jy ! Component: 200 - total flux cleaned = 0.0155458 Jy ! Total flux subtracted in 200 components = 0.0155458 Jy ! Clean residual min=-0.013231 max=0.018616 Jy/beam ! Clean residual mean=-0.000270 rms=0.003691 Jy/beam ! Combined flux in latest and established models = 0.171681 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 68 components and 0.171681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.275506Jy sigma=0.001264 ! Fit after self-cal, rms=0.275088Jy sigma=0.001262 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.163 x 4.068 at 2.954 degrees (North through East) ! Clean map min=-0.010867 max=0.13953 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.275088Jy sigma=0.001262 ! Fit after self-cal, rms=0.274921Jy sigma=0.001261 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274921Jy sigma=0.001261 ! Fit after self-cal, rms=0.274866Jy sigma=0.001261 ! Inverting map and beam ! Estimated beam: bmin=1.162 mas, bmaj=4.113 mas, bpa=3.041 degrees ! Estimated noise=1586.32 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038985 Jy ! Component: 100 - total flux cleaned = 0.00362606 Jy ! Component: 150 - total flux cleaned = 0.00344877 Jy ! Component: 200 - total flux cleaned = 0.00298124 Jy ! Total flux subtracted in 200 components = 0.00298124 Jy ! Clean residual min=-0.011490 max=0.013909 Jy/beam ! Clean residual mean=-0.000230 rms=0.003229 Jy/beam ! Combined flux in latest and established models = 0.174662 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 78 components and 0.174662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274496Jy sigma=0.001259 ! Fit after self-cal, rms=0.274435Jy sigma=0.001259 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274435Jy sigma=0.001259 ! Fit after self-cal, rms=0.274661Jy sigma=0.001259 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274661Jy sigma=0.001259 ! Fit after self-cal, rms=0.274652Jy sigma=0.001259 ! Inverting map and beam ! Estimated beam: bmin=1.161 mas, bmaj=4.115 mas, bpa=3.057 degrees ! Estimated noise=1589.54 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00292676 Jy ! Component: 100 - total flux cleaned = 0.00354646 Jy ! Component: 150 - total flux cleaned = 0.00367567 Jy ! Component: 200 - total flux cleaned = 0.00379133 Jy ! Total flux subtracted in 200 components = 0.00379133 Jy ! Clean residual min=-0.011185 max=0.012014 Jy/beam ! Clean residual mean=-0.000226 rms=0.003138 Jy/beam ! Combined flux in latest and established models = 0.178453 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 91 components and 0.178453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274495Jy sigma=0.001258 ! Fit after self-cal, rms=0.274483Jy sigma=0.001258 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.342 mas, bmaj=5.704 mas, bpa=-12.29 degrees ! Estimated noise=1873.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029738 Jy ! Component: 100 - total flux cleaned = 0.00421939 Jy ! Component: 150 - total flux cleaned = 0.00468859 Jy ! Component: 200 - total flux cleaned = 0.00490395 Jy ! Total flux subtracted in 200 components = 0.00490395 Jy ! Clean residual min=-0.012623 max=0.015023 Jy/beam ! Clean residual mean=-0.000316 rms=0.003869 Jy/beam ! Combined flux in latest and established models = 0.183357 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 105 components and 0.183357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274462Jy sigma=0.001258 ! Fit after self-cal, rms=0.274458Jy sigma=0.001258 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.094 mas, bmaj=3 mas, bpa=-3.374 degrees ! Estimated noise=2915.3 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.106945 Jy ! Component: 100 - total flux cleaned = 0.131303 Jy ! Component: 150 - total flux cleaned = 0.138436 Jy ! Component: 200 - total flux cleaned = 0.141682 Jy ! Total flux subtracted in 200 components = 0.141682 Jy ! Clean residual min=-0.015662 max=0.019139 Jy/beam ! Clean residual mean=-0.000153 rms=0.004497 Jy/beam ! Combined flux in latest and established models = 0.141682 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.141682 Jy ! Inverting map and beam ! Estimated beam: bmin=1.161 mas, bmaj=4.115 mas, bpa=3.057 degrees ! Estimated noise=1589.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260437 Jy ! Component: 100 - total flux cleaned = 0.0367879 Jy ! Component: 150 - total flux cleaned = 0.0418147 Jy ! Component: 200 - total flux cleaned = 0.0431964 Jy ! Total flux subtracted in 200 components = 0.0431964 Jy ! Clean residual min=-0.010143 max=0.013372 Jy/beam ! Clean residual mean=-0.000217 rms=0.003246 Jy/beam ! Combined flux in latest and established models = 0.184878 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 58 components and 0.184878 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.342 mas, bmaj=5.704 mas, bpa=-12.29 degrees ! Estimated noise=1873.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036863 Jy ! Component: 100 - total flux cleaned = 0.00398298 Jy ! Component: 150 - total flux cleaned = 0.00426555 Jy ! Component: 200 - total flux cleaned = 0.00439205 Jy ! Total flux subtracted in 200 components = 0.00439205 Jy ! Clean residual min=-0.012979 max=0.015570 Jy/beam ! Clean residual mean=-0.000277 rms=0.003939 Jy/beam ! Combined flux in latest and established models = 0.18927 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 67 components and 0.18927 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.161 mas, bmaj=4.115 mas, bpa=3.057 degrees ! Estimated noise=1589.54 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000803855 Jy ! Component: 100 - total flux cleaned = -0.00106635 Jy ! Component: 150 - total flux cleaned = -0.0011903 Jy ! Component: 200 - total flux cleaned = -0.00119115 Jy ! Total flux subtracted in 200 components = -0.00119115 Jy ! Clean residual min=-0.010561 max=0.012022 Jy/beam ! Clean residual mean=-0.000184 rms=0.003059 Jy/beam ! Combined flux in latest and established models = 0.188079 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 83 components and 0.188079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274282Jy sigma=0.001257 ! Fit after self-cal, rms=0.274247Jy sigma=0.001257 wmodel J2335-2907_X_1997_08_27_yyk\_map.mod ! Writing 83 model components to file: J2335-2907_X_1997_08_27_yyk_map.mod wobs J2335-2907_X_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J2335-2907_X_1997_08_27_yyk_uvs.fits wwins J2335-2907_X_1997_08_27_yyk\_map.win ! wwins: Wrote 2 windows to J2335-2907_X_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022445 Jy ! Component: 100 - total flux cleaned = 0.00206686 Jy ! Component: 150 - total flux cleaned = 0.00222077 Jy ! Component: 200 - total flux cleaned = 0.00207998 Jy ! Component: 250 - total flux cleaned = 0.00194181 Jy ! Component: 300 - total flux cleaned = 0.00167676 Jy ! Component: 350 - total flux cleaned = 0.0015546 Jy ! Component: 400 - total flux cleaned = 0.0015562 Jy ! Component: 450 - total flux cleaned = 0.00120442 Jy ! Component: 500 - total flux cleaned = 0.000862672 Jy ! Component: 550 - total flux cleaned = 0.000861186 Jy ! Component: 600 - total flux cleaned = 0.000751763 Jy ! Component: 650 - total flux cleaned = 0.00105911 Jy ! Component: 700 - total flux cleaned = 0.00135832 Jy ! Component: 750 - total flux cleaned = 0.0013603 Jy ! Component: 800 - total flux cleaned = 0.00184213 Jy ! Component: 850 - total flux cleaned = 0.00268398 Jy ! Component: 900 - total flux cleaned = 0.00314154 Jy ! Component: 950 - total flux cleaned = 0.00358893 Jy ! Component: 1000 - total flux cleaned = 0.00367768 Jy ! Component: 1050 - total flux cleaned = 0.00419744 Jy ! Component: 1100 - total flux cleaned = 0.00445236 Jy ! Component: 1150 - total flux cleaned = 0.0048728 Jy ! Component: 1200 - total flux cleaned = 0.00495532 Jy ! Component: 1250 - total flux cleaned = 0.00503819 Jy ! Component: 1300 - total flux cleaned = 0.00536214 Jy ! Component: 1350 - total flux cleaned = 0.00536174 Jy ! Component: 1400 - total flux cleaned = 0.00536273 Jy ! Component: 1450 - total flux cleaned = 0.00544206 Jy ! Component: 1500 - total flux cleaned = 0.00552027 Jy ! Component: 1550 - total flux cleaned = 0.00536721 Jy ! Component: 1600 - total flux cleaned = 0.00536739 Jy ! Component: 1650 - total flux cleaned = 0.00521711 Jy ! Component: 1700 - total flux cleaned = 0.00529218 Jy ! Component: 1750 - total flux cleaned = 0.00514333 Jy ! Component: 1800 - total flux cleaned = 0.00484906 Jy ! Component: 1850 - total flux cleaned = 0.00477575 Jy ! Component: 1900 - total flux cleaned = 0.00462991 Jy ! Component: 1950 - total flux cleaned = 0.0042686 Jy ! Component: 2000 - total flux cleaned = 0.00405316 Jy ! Total flux subtracted in 2048 components = 0.00383876 Jy ! Clean residual min=-0.004302 max=0.004072 Jy/beam ! Clean residual mean=0.000002 rms=0.001518 Jy/beam ! Combined flux in latest and established models = 0.191918 Jy keep ! Adding 140 model components to the UV plane model. ! The established model now contains 218 components and 0.191918 Jy ![Exited script file: muppet] wmap "J2335-2907_X_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.161 x 4.115 at 3.057 degrees (North through East) ! Clean map min=-0.0089722 max=0.12008 Jy/beam ! Writing clean map to FITS file: J2335-2907_X_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.120084 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00140923 device "J2335-2907_X_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2335-2907_X_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.52063 3.52063 7.04126 14.0825 28.165 56.3301 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0042 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.12 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.161 x 4.115 at 3.057 degrees (North through East) ! Clean map min=-0.0089722 max=0.12008 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2335-2907_X_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2335-2907_X_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2335-2907_X_1997_08_27_yyk_uvs.log closed on Mon Jan 8 10:54:13 2007