! Started logfile: J2333-2343_X_1997_08_27_yyk_uvs.log on Mon Jan 8 10:53:34 2007 obs J2333-2343_X_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J2333-2343_X_1997_08_27_yyk_uva.fits ! AN table 1: 107 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.501765 visibilities/baseline/integration-bin. ! Found source: J2333-2343 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 702 lines of history. ! ! Reading 9664 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2333-2343_X_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.477497 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.051 mas, bmaj=2.913 mas, bpa=1.04 degrees ! Estimated noise=2171.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.255172 Jy ! Component: 100 - total flux cleaned = 0.330915 Jy ! Total flux subtracted in 100 components = 0.330915 Jy ! Clean residual min=-0.067713 max=0.078272 Jy/beam ! Clean residual mean=0.000051 rms=0.018702 Jy/beam ! Combined flux in latest and established models = 0.330915 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.330915 Jy ! ! Correcting IF 1. ! A total of 322 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 322 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 322 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 322 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.330678Jy sigma=0.001655 ! Fit after self-cal, rms=0.327189Jy sigma=0.001645 ! Inverting map and beam ! Estimated beam: bmin=1.051 mas, bmaj=2.913 mas, bpa=1.04 degrees ! Estimated noise=2171.95 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.165 mas, bmaj=3.5 mas, bpa=3.103 degrees ! Estimated noise=1348.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0973619 Jy ! Component: 100 - total flux cleaned = 0.128523 Jy ! Component: 150 - total flux cleaned = 0.141302 Jy ! Component: 200 - total flux cleaned = 0.143929 Jy ! Total flux subtracted in 200 components = 0.143929 Jy ! Clean residual min=-0.051706 max=0.043295 Jy/beam ! Clean residual mean=-0.000435 rms=0.013586 Jy/beam ! Combined flux in latest and established models = 0.474844 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 26 components and 0.474844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315964Jy sigma=0.001538 ! Fit after self-cal, rms=0.315681Jy sigma=0.001538 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.165 x 3.5 at 3.103 degrees (North through East) ! Clean map min=-0.050025 max=0.3325 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.989433 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.80 HN 1.06 KP 0.99 ! LA 0.98 MK 1.00* NL 0.94 OV 1.09 ! PT 1.00* SC 1.16 ! ! ! Correcting IF 2. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.992241 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.80 HN 1.00 KP 0.99 ! LA 0.98 MK 1.00* NL 0.95 OV 1.11 ! PT 1.00* SC 1.19 ! ! ! Correcting IF 3. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.978187 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.83 HN 1.09 KP 0.96 ! LA 0.99 MK 1.00* NL 0.95 OV 1.10 ! PT 1.00* SC 1.26 ! ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.97785 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.81 HN 1.08 KP 0.95 ! LA 0.98 MK 1.00* NL 0.95 OV 1.12 ! PT 1.00* SC 1.24 ! ! ! Fit before self-cal, rms=0.315681Jy sigma=0.001538 ! Fit after self-cal, rms=0.321215Jy sigma=0.001496 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321215Jy sigma=0.001496 ! Fit after self-cal, rms=0.321175Jy sigma=0.001495 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.287 mas, bmaj=3.726 mas, bpa=0.05981 degrees ! Estimated noise=1317.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0247033 Jy ! Component: 100 - total flux cleaned = -0.0259428 Jy ! Component: 150 - total flux cleaned = -0.0256324 Jy ! Component: 200 - total flux cleaned = -0.0258784 Jy ! Total flux subtracted in 200 components = -0.0258784 Jy ! Clean residual min=-0.037759 max=0.036167 Jy/beam ! Clean residual mean=-0.000216 rms=0.011611 Jy/beam ! Combined flux in latest and established models = 0.448966 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.448966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318058Jy sigma=0.001485 ! Fit after self-cal, rms=0.317799Jy sigma=0.001484 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317799Jy sigma=0.001484 ! Fit after self-cal, rms=0.306135Jy sigma=0.001425 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378423 Jy ! Component: 100 - total flux cleaned = 0.00349071 Jy ! Component: 150 - total flux cleaned = 0.00325839 Jy ! Component: 200 - total flux cleaned = 0.00306855 Jy ! Total flux subtracted in 200 components = 0.00306855 Jy ! Clean residual min=-0.038233 max=0.036146 Jy/beam ! Clean residual mean=-0.000202 rms=0.011611 Jy/beam ! Combined flux in latest and established models = 0.452035 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.452035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.305795Jy sigma=0.001423 ! Fit after self-cal, rms=0.303398Jy sigma=0.001411 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.287 x 3.726 at 0.05981 degrees (North through East) ! Clean map min=-0.037843 max=0.3472 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303398Jy sigma=0.001411 ! Fit after self-cal, rms=17.530668Jy sigma=0.001260 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=17.530668Jy sigma=0.001260 ! Fit after self-cal, rms=17.530682Jy sigma=0.001256 ! Inverting map and beam ! Estimated beam: bmin=1.278 mas, bmaj=3.879 mas, bpa=0.04068 degrees ! Estimated noise=1263 mJy/beam. ! Added new window around map position (4.8, -5.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0385844 Jy ! Component: 100 - total flux cleaned = 0.0515699 Jy ! Component: 150 - total flux cleaned = 0.0559455 Jy ! Component: 200 - total flux cleaned = 0.0564215 Jy ! Total flux subtracted in 200 components = 0.0564215 Jy ! Clean residual min=-0.014973 max=0.013977 Jy/beam ! Clean residual mean=0.000021 rms=0.003936 Jy/beam ! Combined flux in latest and established models = 0.508456 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 62 components and 0.508456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=17.530560Jy sigma=0.001226 ! Fit after self-cal, rms=17.531729Jy sigma=0.001224 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=17.531729Jy sigma=0.001224 ! Fit after self-cal, rms=13.474571Jy sigma=0.001222 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=13.474571Jy sigma=0.001222 ! Fit after self-cal, rms=13.473499Jy sigma=0.001221 ! Inverting map and beam ! Estimated beam: bmin=1.278 mas, bmaj=3.908 mas, bpa=0.3245 degrees ! Estimated noise=1256.46 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035212 Jy ! Component: 100 - total flux cleaned = 0.00202265 Jy ! Component: 150 - total flux cleaned = 5.41043e-06 Jy ! Component: 200 - total flux cleaned = -0.000892459 Jy ! Total flux subtracted in 200 components = -0.000892459 Jy ! Clean residual min=-0.011698 max=0.011502 Jy/beam ! Clean residual mean=0.000019 rms=0.003039 Jy/beam ! Combined flux in latest and established models = 0.507564 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 0.507564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=13.473327Jy sigma=0.001217 ! Fit after self-cal, rms=13.474483Jy sigma=0.001216 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.397 mas, bmaj=5.585 mas, bpa=-12.69 degrees ! Estimated noise=1442.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246399 Jy ! Component: 100 - total flux cleaned = 0.000802787 Jy ! Component: 150 - total flux cleaned = -0.000675385 Jy ! Component: 200 - total flux cleaned = -0.00223551 Jy ! Total flux subtracted in 200 components = -0.00223551 Jy ! Clean residual min=-0.011226 max=0.009301 Jy/beam ! Clean residual mean=0.000032 rms=0.003054 Jy/beam ! Combined flux in latest and established models = 0.505328 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 81 components and 0.505328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=13.474321Jy sigma=0.001214 ! Fit after self-cal, rms=13.476864Jy sigma=0.001214 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9935 mas, bmaj=3.23 mas, bpa=2.385 degrees ! Estimated noise=2897.66 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.323591 Jy ! Component: 100 - total flux cleaned = 0.390807 Jy ! Component: 150 - total flux cleaned = 0.427315 Jy ! Component: 200 - total flux cleaned = 0.452778 Jy ! Total flux subtracted in 200 components = 0.452778 Jy ! Clean residual min=-0.017903 max=0.023089 Jy/beam ! Clean residual mean=-0.000043 rms=0.005591 Jy/beam ! Combined flux in latest and established models = 0.452778 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.452778 Jy ! Inverting map and beam ! Estimated beam: bmin=1.278 mas, bmaj=3.908 mas, bpa=0.3245 degrees ! Estimated noise=1256.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0243396 Jy ! Component: 100 - total flux cleaned = 0.0269363 Jy ! Component: 150 - total flux cleaned = 0.0293152 Jy ! Component: 200 - total flux cleaned = 0.0321434 Jy ! Total flux subtracted in 200 components = 0.0321434 Jy ! Clean residual min=-0.009766 max=0.011337 Jy/beam ! Clean residual mean=-0.000014 rms=0.003171 Jy/beam ! Combined flux in latest and established models = 0.484921 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 58 components and 0.484921 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.397 mas, bmaj=5.585 mas, bpa=-12.69 degrees ! Estimated noise=1442.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124227 Jy ! Component: 100 - total flux cleaned = 0.00274029 Jy ! Component: 150 - total flux cleaned = 0.0029812 Jy ! Component: 200 - total flux cleaned = 0.00257572 Jy ! Total flux subtracted in 200 components = 0.00257572 Jy ! Clean residual min=-0.008684 max=0.009031 Jy/beam ! Clean residual mean=0.000004 rms=0.002961 Jy/beam ! Combined flux in latest and established models = 0.487497 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 80 components and 0.487497 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.278 mas, bmaj=3.908 mas, bpa=0.3245 degrees ! Estimated noise=1256.46 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312479 Jy ! Component: 100 - total flux cleaned = 0.00312363 Jy ! Component: 150 - total flux cleaned = 0.0029504 Jy ! Component: 200 - total flux cleaned = 0.00262302 Jy ! Total flux subtracted in 200 components = 0.00262302 Jy ! Clean residual min=-0.007831 max=0.008581 Jy/beam ! Clean residual mean=0.000008 rms=0.002295 Jy/beam ! Combined flux in latest and established models = 0.49012 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 94 components and 0.49012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=13.476494Jy sigma=0.001213 ! Fit after self-cal, rms=13.477077Jy sigma=0.001213 wmodel J2333-2343_X_1997_08_27_yyk\_map.mod ! Writing 94 model components to file: J2333-2343_X_1997_08_27_yyk_map.mod wobs J2333-2343_X_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J2333-2343_X_1997_08_27_yyk_uvs.fits wwins J2333-2343_X_1997_08_27_yyk\_map.win ! wwins: Wrote 2 windows to J2333-2343_X_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175103 Jy ! Component: 100 - total flux cleaned = 0.00257637 Jy ! Component: 150 - total flux cleaned = 0.00398833 Jy ! Component: 200 - total flux cleaned = 0.00399298 Jy ! Component: 250 - total flux cleaned = 0.00444926 Jy ! Component: 300 - total flux cleaned = 0.00453218 Jy ! Component: 350 - total flux cleaned = 0.00501298 Jy ! Component: 400 - total flux cleaned = 0.00508433 Jy ! Component: 450 - total flux cleaned = 0.00529827 Jy ! Component: 500 - total flux cleaned = 0.00550489 Jy ! Component: 550 - total flux cleaned = 0.00570066 Jy ! Component: 600 - total flux cleaned = 0.00576338 Jy ! Component: 650 - total flux cleaned = 0.00581916 Jy ! Component: 700 - total flux cleaned = 0.00587476 Jy ! Component: 750 - total flux cleaned = 0.0058236 Jy ! Component: 800 - total flux cleaned = 0.00592778 Jy ! Component: 850 - total flux cleaned = 0.00597647 Jy ! Component: 900 - total flux cleaned = 0.00592844 Jy ! Component: 950 - total flux cleaned = 0.00583494 Jy ! Component: 1000 - total flux cleaned = 0.00601738 Jy ! Component: 1050 - total flux cleaned = 0.00601606 Jy ! Component: 1100 - total flux cleaned = 0.00597236 Jy ! Component: 1150 - total flux cleaned = 0.00605737 Jy ! Component: 1200 - total flux cleaned = 0.00618256 Jy ! Component: 1250 - total flux cleaned = 0.00634682 Jy ! Component: 1300 - total flux cleaned = 0.00650853 Jy ! Component: 1350 - total flux cleaned = 0.00662813 Jy ! Component: 1400 - total flux cleaned = 0.00686391 Jy ! Component: 1450 - total flux cleaned = 0.00698037 Jy ! Component: 1500 - total flux cleaned = 0.00721007 Jy ! Component: 1550 - total flux cleaned = 0.00739925 Jy ! Component: 1600 - total flux cleaned = 0.00754861 Jy ! Component: 1650 - total flux cleaned = 0.00777068 Jy ! Component: 1700 - total flux cleaned = 0.0078806 Jy ! Component: 1750 - total flux cleaned = 0.00795328 Jy ! Component: 1800 - total flux cleaned = 0.00813328 Jy ! Component: 1850 - total flux cleaned = 0.00824009 Jy ! Component: 1900 - total flux cleaned = 0.0083464 Jy ! Component: 1950 - total flux cleaned = 0.00845182 Jy ! Component: 2000 - total flux cleaned = 0.00848683 Jy ! Total flux subtracted in 2048 components = 0.00852238 Jy ! Clean residual min=-0.002019 max=0.001962 Jy/beam ! Clean residual mean=0.000010 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.498642 Jy keep ! Adding 123 model components to the UV plane model. ! The established model now contains 217 components and 0.498642 Jy ![Exited script file: muppet] wmap "J2333-2343_X_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.278 x 3.908 at 0.3245 degrees (North through East) ! Clean map min=-0.007897 max=0.38172 Jy/beam ! Writing clean map to FITS file: J2333-2343_X_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.38172 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000617503 device "J2333-2343_X_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2333-2343_X_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.485305 0.485305 0.97061 1.94122 3.88244 7.76488 15.5298 31.0595 62.1191 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.381 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.278 x 3.908 at 0.3245 degrees (North through East) ! Clean map min=-0.007897 max=0.38172 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2333-2343_X_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2333-2343_X_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2333-2343_X_1997_08_27_yyk_uvs.log closed on Mon Jan 8 10:53:40 2007