! Started logfile: J2333-2343_S_1997_07_02_yyk_uvs.log on Sun Jan 7 20:25:56 2007 obs J2333-2343_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J2333-2343_S_1997_07_02_yyk_uva.fits ! AN table 1: 138 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1.20161 visibilities/baseline/integration-bin. ! Found source: J2333-2343 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 754 lines of history. ! ! Reading 29848 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2333-2343_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.723345 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.778 mas, bmaj=7.587 mas, bpa=-11.83 degrees ! Estimated noise=1564.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.481426 Jy ! Component: 100 - total flux cleaned = 0.623001 Jy ! Total flux subtracted in 100 components = 0.623001 Jy ! Clean residual min=-0.035112 max=0.071179 Jy/beam ! Clean residual mean=0.000433 rms=0.012496 Jy/beam ! Combined flux in latest and established models = 0.623001 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.623001 Jy ! ! Correcting IF 1. ! A total of 364 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 227 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 227 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 227 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.390380Jy sigma=0.001741 ! Fit after self-cal, rms=0.388129Jy sigma=0.001731 ! Inverting map and beam ! Estimated beam: bmin=2.778 mas, bmaj=7.587 mas, bpa=-11.83 degrees ! Estimated noise=1565.34 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.531 mas, bmaj=9.419 mas, bpa=-10.86 degrees ! Estimated noise=1094.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0805303 Jy ! Component: 100 - total flux cleaned = 0.109337 Jy ! Component: 150 - total flux cleaned = 0.11687 Jy ! Component: 200 - total flux cleaned = 0.118124 Jy ! Total flux subtracted in 200 components = 0.118124 Jy ! Clean residual min=-0.027919 max=0.059984 Jy/beam ! Clean residual mean=0.000640 rms=0.014154 Jy/beam ! Combined flux in latest and established models = 0.741124 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 32 components and 0.741124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.374997Jy sigma=0.001671 ! Fit after self-cal, rms=0.374640Jy sigma=0.001670 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.531 x 9.419 at -10.86 degrees (North through East) ! Clean map min=-0.028582 max=0.53226 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00951 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.19 HN 0.99 KP 0.83 ! LA 0.95 MK 1.00 NL 1.00* OV 1.15 ! PT 0.90 SC 0.81 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.969234 ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.22 HN 1.08 KP 0.89 ! LA 1.02 MK 1.05 NL 1.01 OV 1.10 ! PT 0.87 SC 0.93 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.02885 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.13 HN 1.02 KP 0.83 ! LA 0.78 MK 0.90 NL 0.96 OV 1.03 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.971736 ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.18 HN 1.21 KP 0.87 ! LA 0.86 MK 1.04 NL 1.10 OV 1.00 ! PT 0.87 SC 0.99 ! ! ! Fit before self-cal, rms=0.374640Jy sigma=0.001670 ! Fit after self-cal, rms=0.354982Jy sigma=0.001598 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.354982Jy sigma=0.001598 ! Fit after self-cal, rms=0.355051Jy sigma=0.001598 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.543 mas, bmaj=9.329 mas, bpa=-9.435 degrees ! Estimated noise=1061.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14.5, -18.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0374853 Jy ! Component: 100 - total flux cleaned = 0.0400862 Jy ! Component: 150 - total flux cleaned = 0.0396231 Jy ! Component: 200 - total flux cleaned = 0.038304 Jy ! Total flux subtracted in 200 components = 0.038304 Jy ! Clean residual min=-0.012377 max=0.017839 Jy/beam ! Clean residual mean=0.000070 rms=0.004353 Jy/beam ! Combined flux in latest and established models = 0.779428 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 64 components and 0.779428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.351910Jy sigma=0.001576 ! Fit after self-cal, rms=0.351521Jy sigma=0.001575 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.351521Jy sigma=0.001575 ! Fit after self-cal, rms=0.348979Jy sigma=0.001566 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00511914 Jy ! Component: 100 - total flux cleaned = 0.00436411 Jy ! Component: 150 - total flux cleaned = 0.00370536 Jy ! Component: 200 - total flux cleaned = 0.00341903 Jy ! Total flux subtracted in 200 components = 0.00341903 Jy ! Clean residual min=-0.012106 max=0.016178 Jy/beam ! Clean residual mean=0.000031 rms=0.004026 Jy/beam ! Combined flux in latest and established models = 0.782848 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 78 components and 0.782848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348388Jy sigma=0.001563 ! Fit after self-cal, rms=0.348027Jy sigma=0.001562 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.543 x 9.329 at -9.435 degrees (North through East) ! Clean map min=-0.012232 max=0.51959 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348027Jy sigma=0.001562 ! Fit after self-cal, rms=0.341960Jy sigma=0.001548 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341960Jy sigma=0.001548 ! Fit after self-cal, rms=0.341898Jy sigma=0.001548 ! Inverting map and beam ! Estimated beam: bmin=3.526 mas, bmaj=9.141 mas, bpa=-8.495 degrees ! Estimated noise=1054.6 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.011515 Jy ! Component: 100 - total flux cleaned = 0.0118535 Jy ! Component: 150 - total flux cleaned = 0.0121478 Jy ! Component: 200 - total flux cleaned = 0.0121412 Jy ! Total flux subtracted in 200 components = 0.0121412 Jy ! Clean residual min=-0.011502 max=0.014183 Jy/beam ! Clean residual mean=0.000017 rms=0.003447 Jy/beam ! Combined flux in latest and established models = 0.794989 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 93 components and 0.794989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341453Jy sigma=0.001545 ! Fit after self-cal, rms=0.341376Jy sigma=0.001544 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341376Jy sigma=0.001544 ! Fit after self-cal, rms=0.342487Jy sigma=0.001542 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342487Jy sigma=0.001542 ! Fit after self-cal, rms=0.342483Jy sigma=0.001542 ! Inverting map and beam ! Estimated beam: bmin=3.525 mas, bmaj=9.112 mas, bpa=-8.353 degrees ! Estimated noise=1053.45 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00538361 Jy ! Component: 100 - total flux cleaned = 0.00565831 Jy ! Component: 150 - total flux cleaned = 0.00567381 Jy ! Component: 200 - total flux cleaned = 0.00568361 Jy ! Total flux subtracted in 200 components = 0.00568361 Jy ! Clean residual min=-0.010974 max=0.013538 Jy/beam ! Clean residual mean=0.000048 rms=0.003253 Jy/beam ! Combined flux in latest and established models = 0.800672 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 97 components and 0.800672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342191Jy sigma=0.001540 ! Fit after self-cal, rms=0.342161Jy sigma=0.001540 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.459 mas, bmaj=19.3 mas, bpa=-8.795 degrees ! Estimated noise=1308.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398373 Jy ! Component: 100 - total flux cleaned = 0.0031748 Jy ! Component: 150 - total flux cleaned = 0.00294463 Jy ! Component: 200 - total flux cleaned = 0.00271451 Jy ! Total flux subtracted in 200 components = 0.00271451 Jy ! Clean residual min=-0.011256 max=0.011680 Jy/beam ! Clean residual mean=0.000046 rms=0.003852 Jy/beam ! Combined flux in latest and established models = 0.803387 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 111 components and 0.803387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342191Jy sigma=0.001540 ! Fit after self-cal, rms=0.342113Jy sigma=0.001540 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.777 mas, bmaj=7.474 mas, bpa=-10.68 degrees ! Estimated noise=1532.2 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.480786 Jy ! Component: 100 - total flux cleaned = 0.610838 Jy ! Component: 150 - total flux cleaned = 0.67284 Jy ! Component: 200 - total flux cleaned = 0.712255 Jy ! Total flux subtracted in 200 components = 0.712255 Jy ! Clean residual min=-0.015511 max=0.037944 Jy/beam ! Clean residual mean=0.000244 rms=0.006054 Jy/beam ! Combined flux in latest and established models = 0.712255 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.712255 Jy ! Inverting map and beam ! Estimated beam: bmin=3.525 mas, bmaj=9.112 mas, bpa=-8.353 degrees ! Estimated noise=1053.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, -6.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0449473 Jy ! Component: 100 - total flux cleaned = 0.0669273 Jy ! Component: 150 - total flux cleaned = 0.0794961 Jy ! Component: 200 - total flux cleaned = 0.0815656 Jy ! Total flux subtracted in 200 components = 0.0815656 Jy ! Clean residual min=-0.009348 max=0.014556 Jy/beam ! Clean residual mean=0.000044 rms=0.003348 Jy/beam ! Combined flux in latest and established models = 0.79382 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 64 components and 0.79382 Jy ! Inverting map ! Added new window around map position (36, -24). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00607854 Jy ! Component: 100 - total flux cleaned = 0.00764512 Jy ! Component: 150 - total flux cleaned = 0.00764986 Jy ! Component: 200 - total flux cleaned = 0.00796478 Jy ! Total flux subtracted in 200 components = 0.00796479 Jy ! Clean residual min=-0.008970 max=0.012656 Jy/beam ! Clean residual mean=-0.000015 rms=0.002726 Jy/beam ! Combined flux in latest and established models = 0.801785 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 86 components and 0.801785 Jy ! Inverting map ! Added new window around map position (21.5, -5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00641976 Jy ! Component: 100 - total flux cleaned = 0.00677054 Jy ! Component: 150 - total flux cleaned = 0.00677884 Jy ! Component: 200 - total flux cleaned = 0.00654063 Jy ! Total flux subtracted in 200 components = 0.00654063 Jy ! Clean residual min=-0.008576 max=0.008439 Jy/beam ! Clean residual mean=-0.000079 rms=0.002261 Jy/beam ! Combined flux in latest and established models = 0.808326 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 119 components and 0.808326 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.459 mas, bmaj=19.3 mas, bpa=-8.795 degrees ! Estimated noise=1308.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00469527 Jy ! Component: 100 - total flux cleaned = -0.00527608 Jy ! Component: 150 - total flux cleaned = -0.00543938 Jy ! Component: 200 - total flux cleaned = -0.00558371 Jy ! Total flux subtracted in 200 components = -0.00558371 Jy ! Clean residual min=-0.009465 max=0.007860 Jy/beam ! Clean residual mean=-0.000107 rms=0.002561 Jy/beam ! Combined flux in latest and established models = 0.802742 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 134 components and 0.802742 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.525 mas, bmaj=9.112 mas, bpa=-8.353 degrees ! Estimated noise=1053.45 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171992 Jy ! Component: 100 - total flux cleaned = 0.00229245 Jy ! Component: 150 - total flux cleaned = 0.00246385 Jy ! Component: 200 - total flux cleaned = 0.00262451 Jy ! Total flux subtracted in 200 components = 0.00262451 Jy ! Clean residual min=-0.008782 max=0.007659 Jy/beam ! Clean residual mean=-0.000076 rms=0.002012 Jy/beam ! Combined flux in latest and established models = 0.805366 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 153 components and 0.805366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.340674Jy sigma=0.001532 ! Fit after self-cal, rms=0.340568Jy sigma=0.001532 wmodel J2333-2343_S_1997_07_02_yyk\_map.mod ! Writing 153 model components to file: J2333-2343_S_1997_07_02_yyk_map.mod wobs J2333-2343_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J2333-2343_S_1997_07_02_yyk_uvs.fits wwins J2333-2343_S_1997_07_02_yyk\_map.win ! wwins: Wrote 5 windows to J2333-2343_S_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00144634 Jy ! Component: 100 - total flux cleaned = -0.00133864 Jy ! Component: 150 - total flux cleaned = -0.000499888 Jy ! Component: 200 - total flux cleaned = 0.000385246 Jy ! Component: 250 - total flux cleaned = 0.00130983 Jy ! Component: 300 - total flux cleaned = 0.00183908 Jy ! Component: 350 - total flux cleaned = 0.00200842 Jy ! Component: 400 - total flux cleaned = 0.00192786 Jy ! Component: 450 - total flux cleaned = 0.00192933 Jy ! Component: 500 - total flux cleaned = 0.00177841 Jy ! Component: 550 - total flux cleaned = 0.00155747 Jy ! Component: 600 - total flux cleaned = 0.00141379 Jy ! Component: 650 - total flux cleaned = 0.00141495 Jy ! Component: 700 - total flux cleaned = 0.00121227 Jy ! Component: 750 - total flux cleaned = 0.000882436 Jy ! Component: 800 - total flux cleaned = 0.000690169 Jy ! Component: 850 - total flux cleaned = 0.000374534 Jy ! Component: 900 - total flux cleaned = 6.52655e-05 Jy ! Component: 950 - total flux cleaned = -0.000176762 Jy ! Component: 1000 - total flux cleaned = -0.000414036 Jy ! Component: 1050 - total flux cleaned = -0.000820683 Jy ! Component: 1100 - total flux cleaned = -0.000990397 Jy ! Component: 1150 - total flux cleaned = -0.00115698 Jy ! Component: 1200 - total flux cleaned = -0.00126667 Jy ! Component: 1250 - total flux cleaned = -0.00159104 Jy ! Component: 1300 - total flux cleaned = -0.00206756 Jy ! Component: 1350 - total flux cleaned = -0.00232886 Jy ! Component: 1400 - total flux cleaned = -0.0028422 Jy ! Component: 1450 - total flux cleaned = -0.00309462 Jy ! Component: 1500 - total flux cleaned = -0.00354239 Jy ! Component: 1550 - total flux cleaned = -0.00393307 Jy ! Component: 1600 - total flux cleaned = -0.00431847 Jy ! Component: 1650 - total flux cleaned = -0.00465177 Jy ! Component: 1700 - total flux cleaned = -0.00507516 Jy ! Component: 1750 - total flux cleaned = -0.00553916 Jy ! Component: 1800 - total flux cleaned = -0.00599635 Jy ! Component: 1850 - total flux cleaned = -0.00640255 Jy ! Component: 1900 - total flux cleaned = -0.00689215 Jy ! Component: 1950 - total flux cleaned = -0.00728737 Jy ! Component: 2000 - total flux cleaned = -0.00776529 Jy ! Total flux subtracted in 2048 components = -0.0082376 Jy ! Clean residual min=-0.003401 max=0.002300 Jy/beam ! Clean residual mean=-0.000110 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.797129 Jy keep ! Adding 138 model components to the UV plane model. ! The established model now contains 291 components and 0.797129 Jy ![Exited script file: muppet] wmap "J2333-2343_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.525 x 9.112 at -8.353 degrees (North through East) ! Clean map min=-0.0086225 max=0.51377 Jy/beam ! Writing clean map to FITS file: J2333-2343_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.513771 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000919928 device "J2333-2343_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J2333-2343_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.537163 0.537163 1.07433 2.14865 4.2973 8.5946 17.1892 34.3784 68.7568 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.513 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.525 x 9.112 at -8.353 degrees (North through East) ! Clean map min=-0.0086225 max=0.51377 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2333-2343_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J2333-2343_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2333-2343_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 20:26:03 2007