! Started logfile: J2307-2247_S_1997_08_27_yyk_uvs.log on Sun Jan 7 20:21:44 2007 obs J2307-2247_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J2307-2247_S_1997_08_27_yyk_uva.fits ! AN table 1: 109 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.502548 visibilities/baseline/integration-bin. ! Found source: J2307-2247 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 9860 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2307-2247_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.815766 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.987 mas, bmaj=10.84 mas, bpa=2.318 degrees ! Estimated noise=3060.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.316455 Jy ! Component: 100 - total flux cleaned = 0.432904 Jy ! Total flux subtracted in 100 components = 0.432904 Jy ! Clean residual min=-0.086220 max=0.084821 Jy/beam ! Clean residual mean=-0.005186 rms=0.026146 Jy/beam ! Combined flux in latest and established models = 0.432904 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.432904 Jy ! ! Correcting IF 1. ! A total of 423 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 314 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 314 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 314 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.709901Jy sigma=0.001946 ! Fit after self-cal, rms=0.704371Jy sigma=0.001925 ! Inverting map and beam ! Estimated beam: bmin=3.987 mas, bmaj=10.84 mas, bpa=2.318 degrees ! Estimated noise=3060.04 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.176 mas, bmaj=12.25 mas, bpa=2.186 degrees ! Estimated noise=2090.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.11797 Jy ! Component: 100 - total flux cleaned = 0.154426 Jy ! Component: 150 - total flux cleaned = 0.156222 Jy ! Component: 200 - total flux cleaned = 0.156845 Jy ! Total flux subtracted in 200 components = 0.156845 Jy ! Clean residual min=-0.041155 max=0.032865 Jy/beam ! Clean residual mean=-0.003550 rms=0.011943 Jy/beam ! Combined flux in latest and established models = 0.589748 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.589749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.691060Jy sigma=0.001868 ! Fit after self-cal, rms=0.690510Jy sigma=0.001866 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.176 x 12.25 at 2.186 degrees (North through East) ! Clean map min=-0.040677 max=0.39719 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.03713 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.14 HN 0.65 KP 1.02 ! LA 0.89 MK 1.00* NL 1.00* OV 1.04 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.99767 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.16 HN 0.81 KP 1.10 ! LA 0.97 MK 1.00* NL 0.93 OV 1.02 ! PT 1.00* SC 1.05 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.06295 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.08 HN 0.84 KP 0.97 ! LA 0.72 MK 1.00* NL 0.88 OV 0.93 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.01681 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.14 HN 0.87 KP 1.06 ! LA 0.79 MK 1.00* NL 1.00 OV 0.96 ! PT 1.00* SC 1.06 ! ! ! Fit before self-cal, rms=0.690510Jy sigma=0.001866 ! Fit after self-cal, rms=0.594330Jy sigma=0.001851 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.594330Jy sigma=0.001851 ! Fit after self-cal, rms=0.594713Jy sigma=0.001851 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.077 mas, bmaj=12.01 mas, bpa=-0.6634 degrees ! Estimated noise=2038.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0226439 Jy ! Component: 100 - total flux cleaned = 0.0259789 Jy ! Component: 150 - total flux cleaned = 0.0276178 Jy ! Component: 200 - total flux cleaned = 0.0289503 Jy ! Total flux subtracted in 200 components = 0.0289503 Jy ! Clean residual min=-0.031314 max=0.024702 Jy/beam ! Clean residual mean=-0.002224 rms=0.008587 Jy/beam ! Combined flux in latest and established models = 0.618699 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 61 components and 0.618699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.594042Jy sigma=0.001848 ! Fit after self-cal, rms=0.593877Jy sigma=0.001847 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.593877Jy sigma=0.001847 ! Fit after self-cal, rms=0.589506Jy sigma=0.001836 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213578 Jy ! Component: 100 - total flux cleaned = 0.00212597 Jy ! Component: 150 - total flux cleaned = 0.00212218 Jy ! Component: 200 - total flux cleaned = 0.00211098 Jy ! Total flux subtracted in 200 components = 0.00211098 Jy ! Clean residual min=-0.028719 max=0.021706 Jy/beam ! Clean residual mean=-0.002444 rms=0.008065 Jy/beam ! Combined flux in latest and established models = 0.62081 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 73 components and 0.62081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.589262Jy sigma=0.001835 ! Fit after self-cal, rms=0.588265Jy sigma=0.001832 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.077 x 12.01 at -0.6634 degrees (North through East) ! Clean map min=-0.028629 max=0.39699 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.588265Jy sigma=0.001832 ! Fit after self-cal, rms=5.643135Jy sigma=0.001789 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.643135Jy sigma=0.001789 ! Fit after self-cal, rms=5.644813Jy sigma=0.001788 ! Inverting map and beam ! Estimated beam: bmin=3.969 mas, bmaj=11.34 mas, bpa=-1.491 degrees ! Estimated noise=1908.89 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000909133 Jy ! Component: 100 - total flux cleaned = -0.00133751 Jy ! Component: 150 - total flux cleaned = -0.00184885 Jy ! Component: 200 - total flux cleaned = -0.00224198 Jy ! Total flux subtracted in 200 components = -0.00224198 Jy ! Clean residual min=-0.008054 max=0.007727 Jy/beam ! Clean residual mean=0.000074 rms=0.002201 Jy/beam ! Combined flux in latest and established models = 0.618568 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 87 components and 0.618568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.644787Jy sigma=0.001788 ! Fit after self-cal, rms=5.644609Jy sigma=0.001789 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.644609Jy sigma=0.001789 ! Fit after self-cal, rms=17.090666Jy sigma=0.001787 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=17.090666Jy sigma=0.001787 ! Fit after self-cal, rms=17.092583Jy sigma=0.001787 ! Inverting map and beam ! Estimated beam: bmin=3.949 mas, bmaj=11.62 mas, bpa=-0.2272 degrees ! Estimated noise=1939.08 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000381377 Jy ! Component: 100 - total flux cleaned = 7.25092e-05 Jy ! Component: 150 - total flux cleaned = -0.000316657 Jy ! Component: 200 - total flux cleaned = -0.000646546 Jy ! Total flux subtracted in 200 components = -0.000646546 Jy ! Clean residual min=-0.008342 max=0.007731 Jy/beam ! Clean residual mean=0.000120 rms=0.002137 Jy/beam ! Combined flux in latest and established models = 0.617921 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 98 components and 0.617921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=17.092587Jy sigma=0.001786 ! Fit after self-cal, rms=17.092146Jy sigma=0.001786 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.066 mas, bmaj=15.61 mas, bpa=-9.107 degrees ! Estimated noise=2358.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000697683 Jy ! Component: 100 - total flux cleaned = -0.000998667 Jy ! Component: 150 - total flux cleaned = -0.00123874 Jy ! Component: 200 - total flux cleaned = -0.00136238 Jy ! Total flux subtracted in 200 components = -0.00136237 Jy ! Clean residual min=-0.009598 max=0.007233 Jy/beam ! Clean residual mean=0.000220 rms=0.002472 Jy/beam ! Combined flux in latest and established models = 0.616559 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 106 components and 0.616559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=17.092146Jy sigma=0.001786 ! Fit after self-cal, rms=17.091780Jy sigma=0.001786 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.764 mas, bmaj=11.18 mas, bpa=3.131 degrees ! Estimated noise=3244.34 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.369397 Jy ! Component: 100 - total flux cleaned = 0.511565 Jy ! Component: 150 - total flux cleaned = 0.577784 Jy ! Component: 200 - total flux cleaned = 0.596815 Jy ! Total flux subtracted in 200 components = 0.596815 Jy ! Clean residual min=-0.043930 max=0.048025 Jy/beam ! Clean residual mean=0.000166 rms=0.017763 Jy/beam ! Combined flux in latest and established models = 0.596815 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.596815 Jy ! Inverting map and beam ! Estimated beam: bmin=3.949 mas, bmaj=11.62 mas, bpa=-0.2272 degrees ! Estimated noise=1939.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 6.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.032404 Jy ! Component: 100 - total flux cleaned = 0.0294713 Jy ! Component: 150 - total flux cleaned = 0.0257737 Jy ! Component: 200 - total flux cleaned = 0.023371 Jy ! Total flux subtracted in 200 components = 0.023371 Jy ! Clean residual min=-0.013297 max=0.010149 Jy/beam ! Clean residual mean=0.000104 rms=0.003533 Jy/beam ! Combined flux in latest and established models = 0.620186 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 59 components and 0.620186 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.066 mas, bmaj=15.61 mas, bpa=-9.107 degrees ! Estimated noise=2358.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00298586 Jy ! Component: 100 - total flux cleaned = -0.00475583 Jy ! Component: 150 - total flux cleaned = -0.00598348 Jy ! Component: 200 - total flux cleaned = -0.0066213 Jy ! Total flux subtracted in 200 components = -0.0066213 Jy ! Clean residual min=-0.010089 max=0.007414 Jy/beam ! Clean residual mean=0.000174 rms=0.002452 Jy/beam ! Combined flux in latest and established models = 0.613565 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 69 components and 0.613565 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.949 mas, bmaj=11.62 mas, bpa=-0.2272 degrees ! Estimated noise=1939.08 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187698 Jy ! Component: 100 - total flux cleaned = 0.00150443 Jy ! Component: 150 - total flux cleaned = 0.000612639 Jy ! Component: 200 - total flux cleaned = 7.56104e-05 Jy ! Total flux subtracted in 200 components = 7.56104e-05 Jy ! Clean residual min=-0.010056 max=0.007444 Jy/beam ! Clean residual mean=0.000094 rms=0.002239 Jy/beam ! Combined flux in latest and established models = 0.61364 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 87 components and 0.61364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=17.091793Jy sigma=0.001786 ! Fit after self-cal, rms=17.091995Jy sigma=0.001786 wmodel J2307-2247_S_1997_08_27_yyk\_map.mod ! Writing 87 model components to file: J2307-2247_S_1997_08_27_yyk_map.mod wobs J2307-2247_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J2307-2247_S_1997_08_27_yyk_uvs.fits wwins J2307-2247_S_1997_08_27_yyk\_map.win ! wwins: Wrote 2 windows to J2307-2247_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00396994 Jy ! Component: 100 - total flux cleaned = -0.00477118 Jy ! Component: 150 - total flux cleaned = -0.00560776 Jy ! Component: 200 - total flux cleaned = -0.00627033 Jy ! Component: 250 - total flux cleaned = -0.00678412 Jy ! Component: 300 - total flux cleaned = -0.00668599 Jy ! Component: 350 - total flux cleaned = -0.00686791 Jy ! Component: 400 - total flux cleaned = -0.00669805 Jy ! Component: 450 - total flux cleaned = -0.00669971 Jy ! Component: 500 - total flux cleaned = -0.00662304 Jy ! Component: 550 - total flux cleaned = -0.00647313 Jy ! Component: 600 - total flux cleaned = -0.00604244 Jy ! Component: 650 - total flux cleaned = -0.00562986 Jy ! Component: 700 - total flux cleaned = -0.0054975 Jy ! Component: 750 - total flux cleaned = -0.00517677 Jy ! Component: 800 - total flux cleaned = -0.0048689 Jy ! Component: 850 - total flux cleaned = -0.00474888 Jy ! Component: 900 - total flux cleaned = -0.0043958 Jy ! Component: 950 - total flux cleaned = -0.00405325 Jy ! Component: 1000 - total flux cleaned = -0.00371956 Jy ! Component: 1050 - total flux cleaned = -0.00350271 Jy ! Component: 1100 - total flux cleaned = -0.00313194 Jy ! Component: 1150 - total flux cleaned = -0.002771 Jy ! Component: 1200 - total flux cleaned = -0.00241812 Jy ! Component: 1250 - total flux cleaned = -0.0020241 Jy ! Component: 1300 - total flux cleaned = -0.0017821 Jy ! Component: 1350 - total flux cleaned = -0.00149833 Jy ! Component: 1400 - total flux cleaned = -0.00135937 Jy ! Component: 1450 - total flux cleaned = -0.00108623 Jy ! Component: 1500 - total flux cleaned = -0.000951845 Jy ! Component: 1550 - total flux cleaned = -0.000774402 Jy ! Component: 1600 - total flux cleaned = -0.000557373 Jy ! Component: 1650 - total flux cleaned = -0.000344954 Jy ! Component: 1700 - total flux cleaned = -0.000178889 Jy ! Component: 1750 - total flux cleaned = -0.000178568 Jy ! Component: 1800 - total flux cleaned = -0.000218914 Jy ! Component: 1850 - total flux cleaned = -0.000218828 Jy ! Component: 1900 - total flux cleaned = -0.000179216 Jy ! Component: 1950 - total flux cleaned = -0.000218171 Jy ! Component: 2000 - total flux cleaned = -0.000294062 Jy ! Total flux subtracted in 2048 components = -0.000218708 Jy ! Clean residual min=-0.002639 max=0.002313 Jy/beam ! Clean residual mean=0.000019 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.613422 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 231 components and 0.613421 Jy ![Exited script file: muppet] wmap "J2307-2247_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.949 x 11.62 at -0.2272 degrees (North through East) ! Clean map min=-0.0078083 max=0.38062 Jy/beam ! Writing clean map to FITS file: J2307-2247_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.38062 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000780558 device "J2307-2247_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2307-2247_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.615226 0.615226 1.23045 2.4609 4.92181 9.84362 19.6872 39.3745 78.7489 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.38 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.949 x 11.62 at -0.2272 degrees (North through East) ! Clean map min=-0.0078083 max=0.38062 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2307-2247_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2307-2247_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2307-2247_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 20:21:50 2007