! Started logfile: J2303-1841_S_1997_08_27_yyk_uvs.log on Sun Jan 7 20:20:44 2007 obs J2303-1841_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J2303-1841_S_1997_08_27_yyk_uva.fits ! AN table 1: 137 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.513058 visibilities/baseline/integration-bin. ! Found source: J2303-1841 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 12652 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2303-1841_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.496011 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=6.303 mas, bpa=-18.84 degrees ! Estimated noise=3012.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.130304 Jy ! Component: 100 - total flux cleaned = 0.163486 Jy ! Total flux subtracted in 100 components = 0.163486 Jy ! Clean residual min=-0.030664 max=0.032224 Jy/beam ! Clean residual mean=-0.000956 rms=0.008362 Jy/beam ! Combined flux in latest and established models = 0.163486 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.163486 Jy ! ! Correcting IF 1. ! A total of 534 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 395 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 398 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 395 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.467263Jy sigma=0.001462 ! Fit after self-cal, rms=0.463489Jy sigma=0.001452 ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=6.303 mas, bpa=-18.84 degrees ! Estimated noise=3012.94 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.777 mas, bmaj=7.866 mas, bpa=-10.25 degrees ! Estimated noise=1832.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0457767 Jy ! Component: 100 - total flux cleaned = 0.0518571 Jy ! Component: 150 - total flux cleaned = 0.0525391 Jy ! Component: 200 - total flux cleaned = 0.0528052 Jy ! Total flux subtracted in 200 components = 0.0528052 Jy ! Clean residual min=-0.016059 max=0.021220 Jy/beam ! Clean residual mean=-0.000380 rms=0.004521 Jy/beam ! Combined flux in latest and established models = 0.216291 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 29 components and 0.216291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.460540Jy sigma=0.001439 ! Fit after self-cal, rms=0.460498Jy sigma=0.001439 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.777 x 7.866 at -10.25 degrees (North through East) ! Clean map min=-0.015849 max=0.17024 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.460498Jy sigma=0.001439 ! Fit after self-cal, rms=0.460434Jy sigma=0.001439 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.460434Jy sigma=0.001439 ! Fit after self-cal, rms=0.460434Jy sigma=0.001439 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.777 mas, bmaj=7.865 mas, bpa=-10.24 degrees ! Estimated noise=1832.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000478264 Jy ! Component: 100 - total flux cleaned = 0.000290667 Jy ! Component: 150 - total flux cleaned = 0.000293869 Jy ! Component: 200 - total flux cleaned = 0.000439311 Jy ! Total flux subtracted in 200 components = 0.000439311 Jy ! Clean residual min=-0.016119 max=0.021840 Jy/beam ! Clean residual mean=-0.000383 rms=0.004492 Jy/beam ! Combined flux in latest and established models = 0.216731 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 33 components and 0.216731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.460311Jy sigma=0.001438 ! Fit after self-cal, rms=0.460300Jy sigma=0.001438 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.460300Jy sigma=0.001438 ! Fit after self-cal, rms=0.457870Jy sigma=0.001431 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, 14.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0235616 Jy ! Component: 100 - total flux cleaned = 0.026159 Jy ! Component: 150 - total flux cleaned = 0.0274489 Jy ! Component: 200 - total flux cleaned = 0.028161 Jy ! Total flux subtracted in 200 components = 0.028161 Jy ! Clean residual min=-0.012937 max=0.012799 Jy/beam ! Clean residual mean=-0.000354 rms=0.003556 Jy/beam ! Combined flux in latest and established models = 0.244892 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 54 components and 0.244892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.456531Jy sigma=0.001426 ! Fit after self-cal, rms=0.455910Jy sigma=0.001425 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.777 x 7.865 at -10.24 degrees (North through East) ! Clean map min=-0.013024 max=0.17955 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.455910Jy sigma=0.001425 ! Fit after self-cal, rms=0.452408Jy sigma=0.001424 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.452408Jy sigma=0.001424 ! Fit after self-cal, rms=0.452182Jy sigma=0.001424 ! Inverting map and beam ! Estimated beam: bmin=3.759 mas, bmaj=7.864 mas, bpa=-10.33 degrees ! Estimated noise=1803 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000286369 Jy ! Component: 100 - total flux cleaned = -0.000610731 Jy ! Component: 150 - total flux cleaned = -0.00119404 Jy ! Component: 200 - total flux cleaned = -0.0014679 Jy ! Total flux subtracted in 200 components = -0.0014679 Jy ! Clean residual min=-0.013905 max=0.012100 Jy/beam ! Clean residual mean=-0.000292 rms=0.003282 Jy/beam ! Combined flux in latest and established models = 0.243424 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 70 components and 0.243424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.451798Jy sigma=0.001422 ! Fit after self-cal, rms=0.451706Jy sigma=0.001422 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.451706Jy sigma=0.001422 ! Fit after self-cal, rms=0.451106Jy sigma=0.001422 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.451106Jy sigma=0.001422 ! Fit after self-cal, rms=0.451103Jy sigma=0.001422 ! Inverting map and beam ! Estimated beam: bmin=3.736 mas, bmaj=7.79 mas, bpa=-9.528 degrees ! Estimated noise=1796.34 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00071518 Jy ! Component: 100 - total flux cleaned = -0.0012486 Jy ! Component: 150 - total flux cleaned = -0.00150572 Jy ! Component: 200 - total flux cleaned = -0.00174974 Jy ! Total flux subtracted in 200 components = -0.00174974 Jy ! Clean residual min=-0.013686 max=0.012636 Jy/beam ! Clean residual mean=-0.000288 rms=0.003269 Jy/beam ! Combined flux in latest and established models = 0.241674 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 83 components and 0.241674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.450866Jy sigma=0.001421 ! Fit after self-cal, rms=0.450877Jy sigma=0.001421 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.454 mas, bmaj=12.75 mas, bpa=-12 degrees ! Estimated noise=2223.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0026137 Jy ! Component: 100 - total flux cleaned = -0.00228753 Jy ! Component: 150 - total flux cleaned = -0.00201292 Jy ! Component: 200 - total flux cleaned = -0.00192748 Jy ! Total flux subtracted in 200 components = -0.00192748 Jy ! Clean residual min=-0.013868 max=0.011137 Jy/beam ! Clean residual mean=-0.000604 rms=0.003826 Jy/beam ! Combined flux in latest and established models = 0.239747 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 94 components and 0.239746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.450882Jy sigma=0.001421 ! Fit after self-cal, rms=0.450768Jy sigma=0.001421 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=6.271 mas, bpa=-18.34 degrees ! Estimated noise=2946.2 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.149229 Jy ! Component: 100 - total flux cleaned = 0.198328 Jy ! Component: 150 - total flux cleaned = 0.217885 Jy ! Component: 200 - total flux cleaned = 0.219756 Jy ! Total flux subtracted in 200 components = 0.219756 Jy ! Clean residual min=-0.018333 max=0.023691 Jy/beam ! Clean residual mean=-0.000847 rms=0.005857 Jy/beam ! Combined flux in latest and established models = 0.219756 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.219756 Jy ! Inverting map and beam ! Estimated beam: bmin=3.736 mas, bmaj=7.79 mas, bpa=-9.528 degrees ! Estimated noise=1796.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (33, 17.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191599 Jy ! Component: 100 - total flux cleaned = 0.0249418 Jy ! Component: 150 - total flux cleaned = 0.0259657 Jy ! Component: 200 - total flux cleaned = 0.0259568 Jy ! Total flux subtracted in 200 components = 0.0259568 Jy ! Clean residual min=-0.013254 max=0.014315 Jy/beam ! Clean residual mean=-0.000314 rms=0.003377 Jy/beam ! Combined flux in latest and established models = 0.245712 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 51 components and 0.245712 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.454 mas, bmaj=12.75 mas, bpa=-12 degrees ! Estimated noise=2223.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00219588 Jy ! Component: 100 - total flux cleaned = -0.00219507 Jy ! Component: 150 - total flux cleaned = -0.00175715 Jy ! Component: 200 - total flux cleaned = -0.00157465 Jy ! Total flux subtracted in 200 components = -0.00157465 Jy ! Clean residual min=-0.011022 max=0.011515 Jy/beam ! Clean residual mean=-0.000696 rms=0.003147 Jy/beam ! Combined flux in latest and established models = 0.244138 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 71 components and 0.244138 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.736 mas, bmaj=7.79 mas, bpa=-9.528 degrees ! Estimated noise=1796.34 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000742447 Jy ! Component: 100 - total flux cleaned = 0.00107256 Jy ! Component: 150 - total flux cleaned = 0.000763178 Jy ! Component: 200 - total flux cleaned = 0.000486292 Jy ! Total flux subtracted in 200 components = 0.000486292 Jy ! Clean residual min=-0.012212 max=0.012991 Jy/beam ! Clean residual mean=-0.000331 rms=0.002995 Jy/beam ! Combined flux in latest and established models = 0.244624 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 91 components and 0.244624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.450370Jy sigma=0.001420 ! Fit after self-cal, rms=0.450291Jy sigma=0.001419 wmodel J2303-1841_S_1997_08_27_yyk\_map.mod ! Writing 91 model components to file: J2303-1841_S_1997_08_27_yyk_map.mod wobs J2303-1841_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J2303-1841_S_1997_08_27_yyk_uvs.fits wwins J2303-1841_S_1997_08_27_yyk\_map.win ! wwins: Wrote 3 windows to J2303-1841_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244275 Jy ! Component: 100 - total flux cleaned = 0.000431155 Jy ! Component: 150 - total flux cleaned = 0.00059586 Jy ! Component: 200 - total flux cleaned = 0.00153189 Jy ! Component: 250 - total flux cleaned = 0.00183252 Jy ! Component: 300 - total flux cleaned = 0.00212076 Jy ! Component: 350 - total flux cleaned = 0.00184174 Jy ! Component: 400 - total flux cleaned = 0.00210878 Jy ! Component: 450 - total flux cleaned = 0.00198144 Jy ! Component: 500 - total flux cleaned = 0.00274944 Jy ! Component: 550 - total flux cleaned = 0.00300023 Jy ! Component: 600 - total flux cleaned = 0.00299975 Jy ! Component: 650 - total flux cleaned = 0.00276112 Jy ! Component: 700 - total flux cleaned = 0.00287795 Jy ! Component: 750 - total flux cleaned = 0.00276183 Jy ! Component: 800 - total flux cleaned = 0.00276177 Jy ! Component: 850 - total flux cleaned = 0.00287354 Jy ! Component: 900 - total flux cleaned = 0.00298357 Jy ! Component: 950 - total flux cleaned = 0.00265865 Jy ! Component: 1000 - total flux cleaned = 0.00255087 Jy ! Component: 1050 - total flux cleaned = 0.00212951 Jy ! Component: 1100 - total flux cleaned = 0.00192093 Jy ! Component: 1150 - total flux cleaned = 0.00151153 Jy ! Component: 1200 - total flux cleaned = 0.0016117 Jy ! Component: 1250 - total flux cleaned = 0.00111424 Jy ! Component: 1300 - total flux cleaned = 0.000720539 Jy ! Component: 1350 - total flux cleaned = 0.000526715 Jy ! Component: 1400 - total flux cleaned = 0.000239437 Jy ! Component: 1450 - total flux cleaned = -0.000141059 Jy ! Component: 1500 - total flux cleaned = -0.000235228 Jy ! Component: 1550 - total flux cleaned = -0.000421979 Jy ! Component: 1600 - total flux cleaned = -0.000790002 Jy ! Component: 1650 - total flux cleaned = -0.00106346 Jy ! Component: 1700 - total flux cleaned = -0.00133337 Jy ! Component: 1750 - total flux cleaned = -0.00169028 Jy ! Component: 1800 - total flux cleaned = -0.00177775 Jy ! Component: 1850 - total flux cleaned = -0.00212838 Jy ! Component: 1900 - total flux cleaned = -0.00238801 Jy ! Component: 1950 - total flux cleaned = -0.00256004 Jy ! Component: 2000 - total flux cleaned = -0.0025604 Jy ! Total flux subtracted in 2048 components = -0.00273023 Jy ! Clean residual min=-0.004894 max=0.004850 Jy/beam ! Clean residual mean=-0.000225 rms=0.001753 Jy/beam ! Combined flux in latest and established models = 0.241894 Jy keep ! Adding 123 model components to the UV plane model. ! The established model now contains 214 components and 0.241894 Jy ![Exited script file: muppet] wmap "J2303-1841_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.736 x 7.79 at -9.528 degrees (North through East) ! Clean map min=-0.0099001 max=0.16521 Jy/beam ! Writing clean map to FITS file: J2303-1841_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.16521 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00172853 device "J2303-1841_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2303-1841_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.13878 3.13878 6.27756 12.5551 25.1103 50.2205 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0051 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.165 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.736 x 7.79 at -9.528 degrees (North through East) ! Clean map min=-0.0099001 max=0.16521 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2303-1841_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2303-1841_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2303-1841_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 20:20:51 2007