! Started logfile: J2300-2644_S_1997_07_02_yyk_uvs.log on Sun Jan 7 20:19:53 2007 obs J2300-2644_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J2300-2644_S_1997_07_02_yyk_uva.fits ! AN table 1: 147 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1.2 visibilities/baseline/integration-bin. ! Found source: J2300-2644 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 754 lines of history. ! ! Reading 31752 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2300-2644_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.42779 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.673 mas, bmaj=7.725 mas, bpa=-9.619 degrees ! Estimated noise=1859.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.188157 Jy ! Component: 100 - total flux cleaned = 0.227888 Jy ! Total flux subtracted in 100 components = 0.227888 Jy ! Clean residual min=-0.014565 max=0.019362 Jy/beam ! Clean residual mean=0.001467 rms=0.004577 Jy/beam ! Combined flux in latest and established models = 0.227888 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.227888 Jy ! ! Correcting IF 1. ! A total of 404 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 259 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 309 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 259 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.361624Jy sigma=0.001587 ! Fit after self-cal, rms=0.361056Jy sigma=0.001584 ! Inverting map and beam ! Estimated beam: bmin=2.673 mas, bmaj=7.725 mas, bpa=-9.619 degrees ! Estimated noise=1859.78 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=9.465 mas, bpa=-9.796 degrees ! Estimated noise=1082 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234319 Jy ! Component: 100 - total flux cleaned = 0.032329 Jy ! Component: 150 - total flux cleaned = 0.0360288 Jy ! Component: 200 - total flux cleaned = 0.0366801 Jy ! Total flux subtracted in 200 components = 0.0366801 Jy ! Clean residual min=-0.017332 max=0.017922 Jy/beam ! Clean residual mean=0.001260 rms=0.005472 Jy/beam ! Combined flux in latest and established models = 0.264569 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 36 components and 0.264568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359974Jy sigma=0.001579 ! Fit after self-cal, rms=0.359952Jy sigma=0.001579 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.45 x 9.465 at -9.796 degrees (North through East) ! Clean map min=-0.016591 max=0.21485 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02551 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.04 HN 0.90 KP 0.93 ! LA 0.96 MK 0.94 NL 1.00* OV 1.16 ! PT 0.84 SC 0.91 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.971227 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.14 HN 0.98 KP 0.99 ! LA 1.13 MK 1.08 NL 1.05 OV 1.07 ! PT 0.83 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.0376 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.09 HN 0.87 KP 0.97 ! LA 0.81 MK 0.91 NL 1.06 OV 0.97 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.974016 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.14 HN 1.13 KP 1.03 ! LA 0.89 MK 0.98 NL 1.18 OV 0.98 ! PT 0.85 SC 1.06 ! ! ! Fit before self-cal, rms=0.359952Jy sigma=0.001579 ! Fit after self-cal, rms=0.352365Jy sigma=0.001572 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.352365Jy sigma=0.001572 ! Fit after self-cal, rms=0.352378Jy sigma=0.001572 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=9.42 mas, bpa=-9.773 degrees ! Estimated noise=1068.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002308 Jy ! Component: 100 - total flux cleaned = 0.0001416 Jy ! Component: 150 - total flux cleaned = 0.00014845 Jy ! Component: 200 - total flux cleaned = 0.000156936 Jy ! Total flux subtracted in 200 components = 0.000156936 Jy ! Clean residual min=-0.011718 max=0.020200 Jy/beam ! Clean residual mean=0.001098 rms=0.005104 Jy/beam ! Combined flux in latest and established models = 0.264725 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 44 components and 0.264725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.352345Jy sigma=0.001572 ! Fit after self-cal, rms=0.352337Jy sigma=0.001572 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.352337Jy sigma=0.001572 ! Fit after self-cal, rms=0.351317Jy sigma=0.001568 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000958497 Jy ! Component: 100 - total flux cleaned = 0.000960563 Jy ! Component: 150 - total flux cleaned = 0.00101756 Jy ! Component: 200 - total flux cleaned = 0.00101744 Jy ! Total flux subtracted in 200 components = 0.00101744 Jy ! Clean residual min=-0.011865 max=0.020389 Jy/beam ! Clean residual mean=0.001122 rms=0.005077 Jy/beam ! Combined flux in latest and established models = 0.265743 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 51 components and 0.265743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.351298Jy sigma=0.001567 ! Fit after self-cal, rms=0.351142Jy sigma=0.001567 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.419 x 9.42 at -9.773 degrees (North through East) ! Clean map min=-0.011661 max=0.21502 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.351142Jy sigma=0.001567 ! Fit after self-cal, rms=0.506093Jy sigma=0.001563 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.506093Jy sigma=0.001563 ! Fit after self-cal, rms=0.506326Jy sigma=0.001563 ! Inverting map and beam ! Estimated beam: bmin=3.403 mas, bmaj=9.437 mas, bpa=-9.914 degrees ! Estimated noise=1063.28 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000106228 Jy ! Component: 100 - total flux cleaned = -0.00010071 Jy ! Component: 150 - total flux cleaned = -9.46708e-05 Jy ! Component: 200 - total flux cleaned = -9.32281e-05 Jy ! Total flux subtracted in 200 components = -9.32281e-05 Jy ! Clean residual min=-0.012611 max=0.020572 Jy/beam ! Clean residual mean=0.000805 rms=0.005073 Jy/beam ! Combined flux in latest and established models = 0.26565 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.26565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.506315Jy sigma=0.001563 ! Fit after self-cal, rms=0.506392Jy sigma=0.001563 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.506392Jy sigma=0.001563 ! Fit after self-cal, rms=0.532382Jy sigma=0.001561 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.532382Jy sigma=0.001561 ! Fit after self-cal, rms=0.532438Jy sigma=0.001561 ! Inverting map and beam ! Estimated beam: bmin=3.4 mas, bmaj=9.421 mas, bpa=-9.722 degrees ! Estimated noise=1066.5 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00092756 Jy ! Component: 100 - total flux cleaned = 0.00100079 Jy ! Component: 150 - total flux cleaned = 0.00105985 Jy ! Component: 200 - total flux cleaned = 0.00110885 Jy ! Total flux subtracted in 200 components = 0.00110885 Jy ! Clean residual min=-0.012614 max=0.020606 Jy/beam ! Clean residual mean=0.000819 rms=0.005062 Jy/beam ! Combined flux in latest and established models = 0.266758 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 68 components and 0.266758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.532432Jy sigma=0.001561 ! Fit after self-cal, rms=0.532471Jy sigma=0.001561 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.422 mas, bmaj=21.48 mas, bpa=-5.602 degrees ! Estimated noise=1336.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154631 Jy ! Component: 100 - total flux cleaned = 0.00157135 Jy ! Component: 150 - total flux cleaned = 0.00165183 Jy ! Component: 200 - total flux cleaned = 0.00165449 Jy ! Total flux subtracted in 200 components = 0.00165449 Jy ! Clean residual min=-0.017452 max=0.030126 Jy/beam ! Clean residual mean=0.001494 rms=0.008638 Jy/beam ! Combined flux in latest and established models = 0.268413 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 70 components and 0.268413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.532486Jy sigma=0.001561 ! Fit after self-cal, rms=0.532502Jy sigma=0.001561 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.648 mas, bmaj=7.691 mas, bpa=-9.499 degrees ! Estimated noise=1872.48 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.191526 Jy ! Component: 100 - total flux cleaned = 0.234709 Jy ! Component: 150 - total flux cleaned = 0.252613 Jy ! Component: 200 - total flux cleaned = 0.261832 Jy ! Total flux subtracted in 200 components = 0.261832 Jy ! Clean residual min=-0.013567 max=0.014687 Jy/beam ! Clean residual mean=0.000710 rms=0.003276 Jy/beam ! Combined flux in latest and established models = 0.261832 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.261832 Jy ! Inverting map and beam ! Estimated beam: bmin=3.4 mas, bmaj=9.421 mas, bpa=-9.722 degrees ! Estimated noise=1066.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00302858 Jy ! Component: 100 - total flux cleaned = 0.00402298 Jy ! Component: 150 - total flux cleaned = 0.00440561 Jy ! Component: 200 - total flux cleaned = 0.00440227 Jy ! Total flux subtracted in 200 components = 0.00440227 Jy ! Clean residual min=-0.012700 max=0.020491 Jy/beam ! Clean residual mean=0.000816 rms=0.005090 Jy/beam ! Combined flux in latest and established models = 0.266234 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.266234 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.422 mas, bmaj=21.48 mas, bpa=-5.602 degrees ! Estimated noise=1336.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192004 Jy ! Component: 100 - total flux cleaned = 0.00171261 Jy ! Component: 150 - total flux cleaned = 0.00164899 Jy ! Component: 200 - total flux cleaned = 0.00171122 Jy ! Total flux subtracted in 200 components = 0.00171122 Jy ! Clean residual min=-0.017435 max=0.030124 Jy/beam ! Clean residual mean=0.001492 rms=0.008659 Jy/beam ! Combined flux in latest and established models = 0.267946 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 0.267945 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.4 mas, bmaj=9.421 mas, bpa=-9.722 degrees ! Estimated noise=1066.5 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00190947 Jy ! Component: 100 - total flux cleaned = -0.00164836 Jy ! Component: 150 - total flux cleaned = -0.00150508 Jy ! Component: 200 - total flux cleaned = -0.00139178 Jy ! Total flux subtracted in 200 components = -0.00139178 Jy ! Clean residual min=-0.012724 max=0.020545 Jy/beam ! Clean residual mean=0.000814 rms=0.005040 Jy/beam ! Combined flux in latest and established models = 0.266554 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 48 components and 0.266554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.532504Jy sigma=0.001561 ! Fit after self-cal, rms=0.532525Jy sigma=0.001561 wmodel J2300-2644_S_1997_07_02_yyk\_map.mod ! Writing 48 model components to file: J2300-2644_S_1997_07_02_yyk_map.mod wobs J2300-2644_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J2300-2644_S_1997_07_02_yyk_uvs.fits wwins J2300-2644_S_1997_07_02_yyk\_map.win ! wwins: Wrote 1 windows to J2300-2644_S_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00854762 Jy ! Component: 100 - total flux cleaned = 0.0139934 Jy ! Component: 150 - total flux cleaned = 0.0169819 Jy ! Component: 200 - total flux cleaned = 0.0200081 Jy ! Component: 250 - total flux cleaned = 0.0230474 Jy ! Component: 300 - total flux cleaned = 0.025683 Jy ! Component: 350 - total flux cleaned = 0.0274044 Jy ! Component: 400 - total flux cleaned = 0.0287501 Jy ! Component: 450 - total flux cleaned = 0.030145 Jy ! Component: 500 - total flux cleaned = 0.0312265 Jy ! Component: 550 - total flux cleaned = 0.0324837 Jy ! Component: 600 - total flux cleaned = 0.0333559 Jy ! Component: 650 - total flux cleaned = 0.0340916 Jy ! Component: 700 - total flux cleaned = 0.0346996 Jy ! Component: 750 - total flux cleaned = 0.0352892 Jy ! Component: 800 - total flux cleaned = 0.0358593 Jy ! Component: 850 - total flux cleaned = 0.0363201 Jy ! Component: 900 - total flux cleaned = 0.0368543 Jy ! Component: 950 - total flux cleaned = 0.0373716 Jy ! Component: 1000 - total flux cleaned = 0.0378714 Jy ! Component: 1050 - total flux cleaned = 0.0382765 Jy ! Component: 1100 - total flux cleaned = 0.038828 Jy ! Component: 1150 - total flux cleaned = 0.0395169 Jy ! Component: 1200 - total flux cleaned = 0.0401129 Jy ! Component: 1250 - total flux cleaned = 0.0408386 Jy ! Component: 1300 - total flux cleaned = 0.0412638 Jy ! Component: 1350 - total flux cleaned = 0.0418175 Jy ! Component: 1400 - total flux cleaned = 0.0423575 Jy ! Component: 1450 - total flux cleaned = 0.0429489 Jy ! Component: 1500 - total flux cleaned = 0.0434623 Jy ! Component: 1550 - total flux cleaned = 0.0437137 Jy ! Component: 1600 - total flux cleaned = 0.0441454 Jy ! Component: 1650 - total flux cleaned = 0.0446268 Jy ! Component: 1700 - total flux cleaned = 0.0448625 Jy ! Component: 1750 - total flux cleaned = 0.0453259 Jy ! Component: 1800 - total flux cleaned = 0.0457794 Jy ! Component: 1850 - total flux cleaned = 0.0463349 Jy ! Component: 1900 - total flux cleaned = 0.0468799 Jy ! Component: 1950 - total flux cleaned = 0.0473615 Jy ! Component: 2000 - total flux cleaned = 0.0478349 Jy ! Total flux subtracted in 2048 components = 0.0483526 Jy ! Clean residual min=-0.002818 max=0.002735 Jy/beam ! Clean residual mean=0.000509 rms=0.001251 Jy/beam ! Combined flux in latest and established models = 0.314906 Jy keep ! Adding 200 model components to the UV plane model. ! The established model now contains 248 components and 0.314906 Jy ![Exited script file: muppet] wmap "J2300-2644_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.4 x 9.421 at -9.722 degrees (North through East) ! Clean map min=-0.0053999 max=0.21897 Jy/beam ! Writing clean map to FITS file: J2300-2644_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.218966 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00117825 device "J2300-2644_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J2300-2644_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.61429 1.61429 3.22859 6.45718 12.9144 25.8287 51.6574 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0035 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.218 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.4 x 9.421 at -9.722 degrees (North through East) ! Clean map min=-0.0053999 max=0.21897 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2300-2644_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J2300-2644_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2300-2644_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 20:20:00 2007