! Started logfile: J2258-2758_X_1996_08_10_yyk_uvs.log on Mon Jan 8 10:46:26 2007 obs J2258-2758_X_1996_08_10_yyk_uva.fits ! Reading UV FITS file: J2258-2758_X_1996_08_10_yyk_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.596768 visibilities/baseline/integration-bin. ! Found source: J2258-2758 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15049e+09 8e+06 1 8e+06 ! 02 2 8.23424e+09 8e+06 1 8e+06 ! 03 3 8.41424e+09 8e+06 1 8e+06 ! 04 4 8.55424e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 630 lines of history. ! ! Reading 5908 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2258-2758_X_1996_08_10_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 3.59966 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6715 mas, bmaj=3.764 mas, bpa=-22.33 degrees ! Estimated noise=3221.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.0274 Jy ! Component: 100 - total flux cleaned = 3.45331 Jy ! Total flux subtracted in 100 components = 3.45331 Jy ! Clean residual min=-0.077374 max=0.104764 Jy/beam ! Clean residual mean=-0.002000 rms=0.024891 Jy/beam ! Combined flux in latest and established models = 3.45331 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 3.45331 Jy ! ! Correcting IF 1. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.658326Jy sigma=0.003557 ! Fit after self-cal, rms=0.657450Jy sigma=0.003552 ! Inverting map and beam ! Estimated beam: bmin=0.6716 mas, bmaj=3.764 mas, bpa=-22.33 degrees ! Estimated noise=3220.69 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.925 mas, bmaj=4.259 mas, bpa=-22.26 degrees ! Estimated noise=1625.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.2042 Jy ! Component: 100 - total flux cleaned = 0.294172 Jy ! Component: 150 - total flux cleaned = 0.341614 Jy ! Component: 200 - total flux cleaned = 0.368839 Jy ! Total flux subtracted in 200 components = 0.36884 Jy ! Clean residual min=-0.056095 max=0.065423 Jy/beam ! Clean residual mean=-0.000928 rms=0.017094 Jy/beam ! Combined flux in latest and established models = 3.82215 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 51 model components to the UV plane model. ! The established model now contains 57 components and 3.82215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.626115Jy sigma=0.003292 ! Fit after self-cal, rms=0.625959Jy sigma=0.003292 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.925 x 4.259 at -22.26 degrees (North through East) ! Clean map min=-0.054716 max=3.5446 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.993142 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.00 KP 1.00* ! LA 1.03 MK 1.00 NL 1.04 OV 1.00 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00224 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 0.98 KP 1.00* ! LA 1.00 MK 0.99 NL 1.01 OV 1.05 ! PT 0.95 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.998992 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.00 KP 1.00* ! LA 1.01 MK 1.02 NL 1.01 OV 1.01 ! PT 0.96 SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.999612 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 1.02 KP 1.00* ! LA 1.01 MK 1.00 NL 1.03 OV 0.99 ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.625959Jy sigma=0.003292 ! Fit after self-cal, rms=0.623674Jy sigma=0.003225 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.623674Jy sigma=0.003225 ! Fit after self-cal, rms=0.623671Jy sigma=0.003225 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9285 mas, bmaj=4.3 mas, bpa=-22.28 degrees ! Estimated noise=1618.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.8, -3). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0223783 Jy ! Component: 100 - total flux cleaned = 0.0189861 Jy ! Component: 150 - total flux cleaned = 0.0156963 Jy ! Component: 200 - total flux cleaned = 0.0143566 Jy ! Total flux subtracted in 200 components = 0.0143566 Jy ! Clean residual min=-0.017258 max=0.023581 Jy/beam ! Clean residual mean=0.000043 rms=0.005749 Jy/beam ! Combined flux in latest and established models = 3.8365 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 87 components and 3.8365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.618959Jy sigma=0.003200 ! Fit after self-cal, rms=0.618881Jy sigma=0.003199 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.618881Jy sigma=0.003199 ! Fit after self-cal, rms=0.459789Jy sigma=0.002367 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136994 Jy ! Component: 100 - total flux cleaned = 0.0118534 Jy ! Component: 150 - total flux cleaned = 0.00877236 Jy ! Component: 200 - total flux cleaned = 0.00615579 Jy ! Total flux subtracted in 200 components = 0.00615579 Jy ! Clean residual min=-0.016247 max=0.015889 Jy/beam ! Clean residual mean=0.000035 rms=0.004563 Jy/beam ! Combined flux in latest and established models = 3.84266 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 122 components and 3.84266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.458067Jy sigma=0.002359 ! Fit after self-cal, rms=0.397129Jy sigma=0.002055 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9285 x 4.3 at -22.28 degrees (North through East) ! Clean map min=-0.015671 max=3.5568 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.397129Jy sigma=0.002055 ! Fit after self-cal, rms=0.392294Jy sigma=0.002044 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.392294Jy sigma=0.002044 ! Fit after self-cal, rms=0.363782Jy sigma=0.001904 ! Inverting map and beam ! Estimated beam: bmin=0.9312 mas, bmaj=4.298 mas, bpa=-22.3 degrees ! Estimated noise=1614.33 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00477651 Jy ! Component: 100 - total flux cleaned = 0.00443881 Jy ! Component: 150 - total flux cleaned = 0.00443836 Jy ! Component: 200 - total flux cleaned = 0.00402206 Jy ! Total flux subtracted in 200 components = 0.00402206 Jy ! Clean residual min=-0.013040 max=0.010794 Jy/beam ! Clean residual mean=0.000006 rms=0.003229 Jy/beam ! Combined flux in latest and established models = 3.84668 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 148 components and 3.84668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.363116Jy sigma=0.001901 ! Fit after self-cal, rms=0.348620Jy sigma=0.001832 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348620Jy sigma=0.001832 ! Fit after self-cal, rms=0.346096Jy sigma=0.001823 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.346096Jy sigma=0.001823 ! Fit after self-cal, rms=0.338794Jy sigma=0.001788 ! Inverting map and beam ! Estimated beam: bmin=0.9326 mas, bmaj=4.3 mas, bpa=-22.31 degrees ! Estimated noise=1613.36 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192033 Jy ! Component: 100 - total flux cleaned = 0.00197648 Jy ! Component: 150 - total flux cleaned = 0.00166095 Jy ! Component: 200 - total flux cleaned = 0.00123405 Jy ! Total flux subtracted in 200 components = 0.00123405 Jy ! Clean residual min=-0.011518 max=0.009544 Jy/beam ! Clean residual mean=0.000008 rms=0.002760 Jy/beam ! Combined flux in latest and established models = 3.84791 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 167 components and 3.84791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.338475Jy sigma=0.001787 ! Fit after self-cal, rms=0.334588Jy sigma=0.001768 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.306 mas, bmaj=7.559 mas, bpa=-6.389 degrees ! Estimated noise=1973.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0025614 Jy ! Component: 100 - total flux cleaned = 0.00347981 Jy ! Component: 150 - total flux cleaned = 0.00358558 Jy ! Component: 200 - total flux cleaned = 0.00348877 Jy ! Total flux subtracted in 200 components = 0.00348877 Jy ! Clean residual min=-0.012274 max=0.009838 Jy/beam ! Clean residual mean=0.000021 rms=0.003215 Jy/beam ! Combined flux in latest and established models = 3.8514 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 194 components and 3.8514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.334539Jy sigma=0.001768 ! Fit after self-cal, rms=0.332479Jy sigma=0.001759 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6737 mas, bmaj=3.78 mas, bpa=-22.36 degrees ! Estimated noise=3214.46 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.04683 Jy ! Component: 100 - total flux cleaned = 3.46918 Jy ! Component: 150 - total flux cleaned = 3.60967 Jy ! Component: 200 - total flux cleaned = 3.69017 Jy ! Total flux subtracted in 200 components = 3.69017 Jy ! Clean residual min=-0.029277 max=0.040209 Jy/beam ! Clean residual mean=-0.000548 rms=0.009174 Jy/beam ! Combined flux in latest and established models = 3.69017 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 3.69017 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9326 mas, bmaj=4.3 mas, bpa=-22.31 degrees ! Estimated noise=1613.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.8, -25.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0800778 Jy ! Component: 100 - total flux cleaned = 0.120197 Jy ! Component: 150 - total flux cleaned = 0.142334 Jy ! Component: 200 - total flux cleaned = 0.154678 Jy ! Total flux subtracted in 200 components = 0.154678 Jy ! Clean residual min=-0.012794 max=0.009851 Jy/beam ! Clean residual mean=-0.000025 rms=0.003082 Jy/beam ! Combined flux in latest and established models = 3.84485 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 70 components and 3.84485 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.306 mas, bmaj=7.559 mas, bpa=-6.389 degrees ! Estimated noise=1973.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0093316 Jy ! Component: 100 - total flux cleaned = 0.00956307 Jy ! Component: 150 - total flux cleaned = 0.00937009 Jy ! Component: 200 - total flux cleaned = 0.00920395 Jy ! Total flux subtracted in 200 components = 0.00920395 Jy ! Clean residual min=-0.011225 max=0.010220 Jy/beam ! Clean residual mean=0.000026 rms=0.003246 Jy/beam ! Combined flux in latest and established models = 3.85405 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 93 components and 3.85405 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9326 mas, bmaj=4.3 mas, bpa=-22.31 degrees ! Estimated noise=1613.36 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00277571 Jy ! Component: 100 - total flux cleaned = -0.00327703 Jy ! Component: 150 - total flux cleaned = -0.00389329 Jy ! Component: 200 - total flux cleaned = -0.00424745 Jy ! Total flux subtracted in 200 components = -0.00424745 Jy ! Clean residual min=-0.009833 max=0.008372 Jy/beam ! Clean residual mean=-0.000009 rms=0.002284 Jy/beam ! Combined flux in latest and established models = 3.8498 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 116 components and 3.8498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.332187Jy sigma=0.001758 ! Fit after self-cal, rms=0.330929Jy sigma=0.001752 wmodel J2258-2758_X_1996_08_10_yyk\_map.mod ! Writing 116 model components to file: J2258-2758_X_1996_08_10_yyk_map.mod wobs J2258-2758_X_1996_08_10_yyk\_uvs.fits ! Writing UV FITS file: J2258-2758_X_1996_08_10_yyk_uvs.fits wwins J2258-2758_X_1996_08_10_yyk\_map.win ! wwins: Wrote 3 windows to J2258-2758_X_1996_08_10_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00374926 Jy ! Component: 100 - total flux cleaned = -0.00595646 Jy ! Component: 150 - total flux cleaned = -0.00585247 Jy ! Component: 200 - total flux cleaned = -0.00631254 Jy ! Component: 250 - total flux cleaned = -0.00690543 Jy ! Component: 300 - total flux cleaned = -0.00738685 Jy ! Component: 350 - total flux cleaned = -0.00769224 Jy ! Component: 400 - total flux cleaned = -0.00790952 Jy ! Component: 450 - total flux cleaned = -0.00791017 Jy ! Component: 500 - total flux cleaned = -0.00784503 Jy ! Component: 550 - total flux cleaned = -0.00746944 Jy ! Component: 600 - total flux cleaned = -0.00746827 Jy ! Component: 650 - total flux cleaned = -0.00729196 Jy ! Component: 700 - total flux cleaned = -0.00717866 Jy ! Component: 750 - total flux cleaned = -0.00690538 Jy ! Component: 800 - total flux cleaned = -0.00669423 Jy ! Component: 850 - total flux cleaned = -0.00653911 Jy ! Component: 900 - total flux cleaned = -0.00633744 Jy ! Component: 950 - total flux cleaned = -0.00618923 Jy ! Component: 1000 - total flux cleaned = -0.00604374 Jy ! Component: 1050 - total flux cleaned = -0.00604332 Jy ! Component: 1100 - total flux cleaned = -0.00613534 Jy ! Component: 1150 - total flux cleaned = -0.00622483 Jy ! Component: 1200 - total flux cleaned = -0.00626932 Jy ! Component: 1250 - total flux cleaned = -0.00635614 Jy ! Component: 1300 - total flux cleaned = -0.00627032 Jy ! Component: 1350 - total flux cleaned = -0.00622837 Jy ! Component: 1400 - total flux cleaned = -0.00594049 Jy ! Component: 1450 - total flux cleaned = -0.00581896 Jy ! Component: 1500 - total flux cleaned = -0.00565916 Jy ! Component: 1550 - total flux cleaned = -0.00554104 Jy ! Component: 1600 - total flux cleaned = -0.00542446 Jy ! Component: 1650 - total flux cleaned = -0.00542447 Jy ! Component: 1700 - total flux cleaned = -0.00538604 Jy ! Component: 1750 - total flux cleaned = -0.00527288 Jy ! Component: 1800 - total flux cleaned = -0.00516129 Jy ! Component: 1850 - total flux cleaned = -0.00505058 Jy ! Component: 1900 - total flux cleaned = -0.00490428 Jy ! Component: 1950 - total flux cleaned = -0.00479514 Jy ! Component: 2000 - total flux cleaned = -0.00472267 Jy ! Total flux subtracted in 2048 components = -0.00454288 Jy ! Clean residual min=-0.001885 max=0.001909 Jy/beam ! Clean residual mean=0.000001 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 3.84526 Jy keep ! Adding 136 model components to the UV plane model. ! The established model now contains 252 components and 3.84526 Jy ![Exited script file: muppet] wmap "J2258-2758_X_1996_08_10_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9326 x 4.3 at -22.31 degrees (North through East) ! Clean map min=-0.0064909 max=3.5395 Jy/beam ! Writing clean map to FITS file: J2258-2758_X_1996_08_10_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.53949 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000667563 device "J2258-2758_X_1996_08_10_yyk\_map.eps/VPS" ! Attempting to open device: 'J2258-2758_X_1996_08_10_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0565814 0.0565814 0.113163 0.226325 0.452651 0.905302 1.8106 3.62121 7.24241 14.4848 28.9697 57.9393 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 3.539 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9326 x 4.3 at -22.31 degrees (North through East) ! Clean map min=-0.0064909 max=3.5395 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2258-2758_X_1996_08_10_yyk\_map.gif/gif" ! Attempting to open device: 'J2258-2758_X_1996_08_10_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2258-2758_X_1996_08_10_yyk_uvs.log closed on Mon Jan 8 10:46:32 2007