! Started logfile: J2258-2758_S_1997_08_27_yyk_uvs.log on Sun Jan 7 20:19:39 2007 obs J2258-2758_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J2258-2758_S_1997_08_27_yyk_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.670206 visibilities/baseline/integration-bin. ! Found source: J2258-2758 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 13632 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2258-2758_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.33848 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.981 mas, bmaj=6.232 mas, bpa=-26.06 degrees ! Estimated noise=3686.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.796742 Jy ! Component: 100 - total flux cleaned = 1.01462 Jy ! Total flux subtracted in 100 components = 1.01462 Jy ! Clean residual min=-0.173199 max=0.196209 Jy/beam ! Clean residual mean=-0.000870 rms=0.043949 Jy/beam ! Combined flux in latest and established models = 1.01462 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.01462 Jy ! ! Correcting IF 1. ! A total of 323 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 211 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 211 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.788135Jy sigma=0.002336 ! Fit after self-cal, rms=0.774813Jy sigma=0.002298 ! Inverting map and beam ! Estimated beam: bmin=2.981 mas, bmaj=6.232 mas, bpa=-26.06 degrees ! Estimated noise=3686.36 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.457 mas, bmaj=7.755 mas, bpa=-16.94 degrees ! Estimated noise=1971.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.274419 Jy ! Component: 100 - total flux cleaned = 0.346983 Jy ! Component: 150 - total flux cleaned = 0.354901 Jy ! Component: 200 - total flux cleaned = 0.361743 Jy ! Total flux subtracted in 200 components = 0.361743 Jy ! Clean residual min=-0.134545 max=0.106680 Jy/beam ! Clean residual mean=-0.003085 rms=0.036399 Jy/beam ! Combined flux in latest and established models = 1.37636 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 27 components and 1.37636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.704463Jy sigma=0.002059 ! Fit after self-cal, rms=0.703807Jy sigma=0.002057 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.457 x 7.755 at -16.94 degrees (North through East) ! Clean map min=-0.13275 max=0.99882 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02029 ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.08 HN 0.78 KP 1.04 ! LA 1.08 MK 0.96 NL 1.00* OV 1.03 ! PT 1.00* SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.988138 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.11 HN 0.96 KP 1.05 ! LA 1.18 MK 1.05 NL 0.84 OV 0.98 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.08618 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.03 HN 0.81 KP 1.01 ! LA 0.87 MK 0.85 NL 0.80 OV 0.88 ! PT 1.00* SC 1.06 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02221 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.05 HN 1.03 KP 0.99 ! LA 0.94 MK 1.01 NL 0.88 OV 0.90 ! PT 1.00* SC 1.06 ! ! ! Fit before self-cal, rms=0.703807Jy sigma=0.002057 ! Fit after self-cal, rms=0.690730Jy sigma=0.002009 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.690730Jy sigma=0.002009 ! Fit after self-cal, rms=0.690665Jy sigma=0.002009 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.397 mas, bmaj=7.838 mas, bpa=-17.54 degrees ! Estimated noise=1979.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0617649 Jy ! Component: 100 - total flux cleaned = 0.0710083 Jy ! Component: 150 - total flux cleaned = 0.0755103 Jy ! Component: 200 - total flux cleaned = 0.0795486 Jy ! Total flux subtracted in 200 components = 0.0795486 Jy ! Clean residual min=-0.128623 max=0.084194 Jy/beam ! Clean residual mean=-0.003083 rms=0.032509 Jy/beam ! Combined flux in latest and established models = 1.45591 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 1.45591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.682647Jy sigma=0.001983 ! Fit after self-cal, rms=0.682462Jy sigma=0.001982 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.682462Jy sigma=0.001982 ! Fit after self-cal, rms=0.667236Jy sigma=0.001940 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106321 Jy ! Component: 100 - total flux cleaned = 0.0117832 Jy ! Component: 150 - total flux cleaned = 0.0128339 Jy ! Component: 200 - total flux cleaned = 0.0137978 Jy ! Total flux subtracted in 200 components = 0.0137978 Jy ! Clean residual min=-0.124282 max=0.085120 Jy/beam ! Clean residual mean=-0.003067 rms=0.031889 Jy/beam ! Combined flux in latest and established models = 1.46971 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 1.46971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.664060Jy sigma=0.001932 ! Fit after self-cal, rms=0.660532Jy sigma=0.001922 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.397 x 7.838 at -17.54 degrees (North through East) ! Clean map min=-0.12121 max=1.0165 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.660532Jy sigma=0.001922 ! Fit after self-cal, rms=25.911257Jy sigma=0.001484 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=25.911257Jy sigma=0.001484 ! Fit after self-cal, rms=25.913074Jy sigma=0.001483 ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=8.936 mas, bpa=-14.86 degrees ! Estimated noise=1905.41 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0207909 Jy ! Component: 100 - total flux cleaned = 0.0207834 Jy ! Component: 150 - total flux cleaned = 0.0218224 Jy ! Component: 200 - total flux cleaned = 0.0217944 Jy ! Total flux subtracted in 200 components = 0.0217944 Jy ! Clean residual min=-0.049896 max=0.033756 Jy/beam ! Clean residual mean=-0.000127 rms=0.010538 Jy/beam ! Combined flux in latest and established models = 1.4915 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 1.4915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=25.912571Jy sigma=0.001467 ! Fit after self-cal, rms=25.917597Jy sigma=0.001466 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=25.917597Jy sigma=0.001466 ! Fit after self-cal, rms=28.128834Jy sigma=0.001463 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=28.128834Jy sigma=0.001463 ! Fit after self-cal, rms=28.137928Jy sigma=0.001463 ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=8.802 mas, bpa=-13.77 degrees ! Estimated noise=1900.19 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0094213 Jy ! Component: 100 - total flux cleaned = 0.0094462 Jy ! Component: 150 - total flux cleaned = 0.00866471 Jy ! Component: 200 - total flux cleaned = 0.00801585 Jy ! Total flux subtracted in 200 components = 0.00801585 Jy ! Clean residual min=-0.041668 max=0.031503 Jy/beam ! Clean residual mean=-0.000122 rms=0.009223 Jy/beam ! Combined flux in latest and established models = 1.49952 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 1.49952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=28.137781Jy sigma=0.001455 ! Fit after self-cal, rms=28.139450Jy sigma=0.001454 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.237 mas, bmaj=17.64 mas, bpa=-9.93 degrees ! Estimated noise=2453.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00320497 Jy ! Component: 100 - total flux cleaned = -0.00384121 Jy ! Component: 150 - total flux cleaned = -0.0038113 Jy ! Component: 200 - total flux cleaned = -0.00440907 Jy ! Total flux subtracted in 200 components = -0.00440907 Jy ! Clean residual min=-0.042871 max=0.035072 Jy/beam ! Clean residual mean=-0.000377 rms=0.011458 Jy/beam ! Combined flux in latest and established models = 1.49511 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 61 components and 1.49511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=28.139450Jy sigma=0.001452 ! Fit after self-cal, rms=28.139269Jy sigma=0.001451 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.725 mas, bmaj=7.216 mas, bpa=-19.35 degrees ! Estimated noise=4585.24 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.970014 Jy ! Component: 100 - total flux cleaned = 1.25353 Jy ! Component: 150 - total flux cleaned = 1.38806 Jy ! Component: 200 - total flux cleaned = 1.41741 Jy ! Total flux subtracted in 200 components = 1.41741 Jy ! Clean residual min=-0.053958 max=0.060257 Jy/beam ! Clean residual mean=-0.000011 rms=0.014804 Jy/beam ! Combined flux in latest and established models = 1.41741 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.41741 Jy ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=8.802 mas, bpa=-13.77 degrees ! Estimated noise=1900.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.050963 Jy ! Component: 100 - total flux cleaned = 0.0637728 Jy ! Component: 150 - total flux cleaned = 0.0682003 Jy ! Component: 200 - total flux cleaned = 0.0706523 Jy ! Total flux subtracted in 200 components = 0.0706523 Jy ! Clean residual min=-0.028471 max=0.026782 Jy/beam ! Clean residual mean=-0.000158 rms=0.007719 Jy/beam ! Combined flux in latest and established models = 1.48806 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 43 components and 1.48806 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.237 mas, bmaj=17.64 mas, bpa=-9.93 degrees ! Estimated noise=2453.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00832958 Jy ! Component: 100 - total flux cleaned = 0.0106113 Jy ! Component: 150 - total flux cleaned = 0.0113184 Jy ! Component: 200 - total flux cleaned = 0.0113254 Jy ! Total flux subtracted in 200 components = 0.0113254 Jy ! Clean residual min=-0.023054 max=0.023614 Jy/beam ! Clean residual mean=-0.000227 rms=0.007698 Jy/beam ! Combined flux in latest and established models = 1.49938 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 58 components and 1.49938 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=8.802 mas, bpa=-13.77 degrees ! Estimated noise=1900.19 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0110117 Jy ! Component: 100 - total flux cleaned = -0.00948761 Jy ! Component: 150 - total flux cleaned = -0.00762923 Jy ! Component: 200 - total flux cleaned = -0.00544574 Jy ! Total flux subtracted in 200 components = -0.00544574 Jy ! Clean residual min=-0.019734 max=0.018661 Jy/beam ! Clean residual mean=-0.000121 rms=0.005578 Jy/beam ! Combined flux in latest and established models = 1.49394 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 79 components and 1.49394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=28.138659Jy sigma=0.001437 ! Fit after self-cal, rms=28.140066Jy sigma=0.001436 wmodel J2258-2758_S_1997_08_27_yyk\_map.mod ! Writing 79 model components to file: J2258-2758_S_1997_08_27_yyk_map.mod wobs J2258-2758_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J2258-2758_S_1997_08_27_yyk_uvs.fits wwins J2258-2758_S_1997_08_27_yyk\_map.win ! wwins: Wrote 2 windows to J2258-2758_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00321342 Jy ! Component: 100 - total flux cleaned = -0.00688631 Jy ! Component: 150 - total flux cleaned = -0.00857993 Jy ! Component: 200 - total flux cleaned = -0.00910814 Jy ! Component: 250 - total flux cleaned = -0.00912124 Jy ! Component: 300 - total flux cleaned = -0.00935507 Jy ! Component: 350 - total flux cleaned = -0.00935268 Jy ! Component: 400 - total flux cleaned = -0.0089382 Jy ! Component: 450 - total flux cleaned = -0.00854587 Jy ! Component: 500 - total flux cleaned = -0.00780649 Jy ! Component: 550 - total flux cleaned = -0.00780979 Jy ! Component: 600 - total flux cleaned = -0.00763875 Jy ! Component: 650 - total flux cleaned = -0.00796406 Jy ! Component: 700 - total flux cleaned = -0.00795925 Jy ! Component: 750 - total flux cleaned = -0.00886489 Jy ! Component: 800 - total flux cleaned = -0.00974087 Jy ! Component: 850 - total flux cleaned = -0.010868 Jy ! Component: 900 - total flux cleaned = -0.0115506 Jy ! Component: 950 - total flux cleaned = -0.0123412 Jy ! Component: 1000 - total flux cleaned = -0.0128497 Jy ! Component: 1050 - total flux cleaned = -0.013591 Jy ! Component: 1100 - total flux cleaned = -0.0141895 Jy ! Component: 1150 - total flux cleaned = -0.0147712 Jy ! Component: 1200 - total flux cleaned = -0.0146564 Jy ! Component: 1250 - total flux cleaned = -0.0141068 Jy ! Component: 1300 - total flux cleaned = -0.0135753 Jy ! Component: 1350 - total flux cleaned = -0.013681 Jy ! Component: 1400 - total flux cleaned = -0.0133779 Jy ! Component: 1450 - total flux cleaned = -0.0132825 Jy ! Component: 1500 - total flux cleaned = -0.0131885 Jy ! Component: 1550 - total flux cleaned = -0.0133783 Jy ! Component: 1600 - total flux cleaned = -0.0132826 Jy ! Component: 1650 - total flux cleaned = -0.0131905 Jy ! Component: 1700 - total flux cleaned = -0.0130147 Jy ! Component: 1750 - total flux cleaned = -0.0131027 Jy ! Component: 1800 - total flux cleaned = -0.0131029 Jy ! Component: 1850 - total flux cleaned = -0.0127722 Jy ! Component: 1900 - total flux cleaned = -0.0125299 Jy ! Component: 1950 - total flux cleaned = -0.012293 Jy ! Component: 2000 - total flux cleaned = -0.0122141 Jy ! Total flux subtracted in 2048 components = -0.0122127 Jy ! Clean residual min=-0.004745 max=0.003803 Jy/beam ! Clean residual mean=-0.000029 rms=0.001565 Jy/beam ! Combined flux in latest and established models = 1.48173 Jy keep ! Adding 141 model components to the UV plane model. ! The established model now contains 220 components and 1.48173 Jy ![Exited script file: muppet] wmap "J2258-2758_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.285 x 8.802 at -13.77 degrees (North through East) ! Clean map min=-0.020866 max=1.1031 Jy/beam ! Writing clean map to FITS file: J2258-2758_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.10307 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00152741 device "J2258-2758_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2258-2758_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.415405 0.415405 0.83081 1.66162 3.32324 6.64648 13.293 26.5859 53.1718 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0045 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.103 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.285 x 8.802 at -13.77 degrees (North through East) ! Clean map min=-0.020866 max=1.1031 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2258-2758_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2258-2758_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2258-2758_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 20:19:46 2007