! Started logfile: J2258-2758_S_1996_01_02_yyk_uvs.log on Sun Jan 7 20:19:02 2007 obs J2258-2758_S_1996_01_02_yyk_uva.fits ! Reading UV FITS file: J2258-2758_S_1996_01_02_yyk_uva.fits ! AN table 1: 70 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.866032 visibilities/baseline/integration-bin. ! Found source: J2258-2758 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 4e+06 1 4e+06 ! 02 2 2.23236e+09 4e+06 1 4e+06 ! 03 3 2.29236e+09 4e+06 1 4e+06 ! 04 4 2.32236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 623 lines of history. ! ! Reading 10912 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2258-2758_S_1996_01_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.22654 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.706 mas, bmaj=7.282 mas, bpa=-0.8355 degrees ! Estimated noise=2612.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.930111 Jy ! Component: 100 - total flux cleaned = 1.16503 Jy ! Total flux subtracted in 100 components = 1.16503 Jy ! Clean residual min=-0.082518 max=0.142315 Jy/beam ! Clean residual mean=-0.001135 rms=0.026914 Jy/beam ! Combined flux in latest and established models = 1.16503 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.16503 Jy ! ! Correcting IF 1. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.573114Jy sigma=0.001921 ! Fit after self-cal, rms=0.571228Jy sigma=0.001913 ! Inverting map and beam ! Estimated beam: bmin=2.706 mas, bmaj=7.282 mas, bpa=-0.8355 degrees ! Estimated noise=2612.57 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=9.528 mas, bpa=-6.326 degrees ! Estimated noise=1769.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0841955 Jy ! Component: 100 - total flux cleaned = 0.0958655 Jy ! Component: 150 - total flux cleaned = 0.101415 Jy ! Component: 200 - total flux cleaned = 0.105164 Jy ! Total flux subtracted in 200 components = 0.105164 Jy ! Clean residual min=-0.065557 max=0.067105 Jy/beam ! Clean residual mean=-0.001528 rms=0.018662 Jy/beam ! Combined flux in latest and established models = 1.2702 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 17 components and 1.2702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.559539Jy sigma=0.001869 ! Fit after self-cal, rms=0.559137Jy sigma=0.001868 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.185 x 9.528 at -6.326 degrees (North through East) ! Clean map min=-0.063724 max=0.91461 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00442 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.07 HN 1.35 KP 0.84 ! LA 1.10 MK 0.99 NL 0.80 OV 1.03 ! PT 0.94 SC 0.83 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.953399 ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.16 HN 1.40 KP 0.87 ! LA 1.23 MK 1.04 NL 0.83 OV 1.03 ! PT 0.92 SC 0.89 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.01558 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.11 HN 1.23 KP 0.84 ! LA 0.91 MK 0.84 NL 0.88 OV 0.95 ! PT 1.07 SC 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.974706 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.14 HN 1.42 KP 0.91 ! LA 0.99 MK 0.89 NL 0.96 OV 0.91 ! PT 1.05 SC 0.90 ! ! ! Fit before self-cal, rms=0.559137Jy sigma=0.001868 ! Fit after self-cal, rms=0.537352Jy sigma=0.001750 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.537352Jy sigma=0.001750 ! Fit after self-cal, rms=0.537362Jy sigma=0.001750 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=8.998 mas, bpa=-6.097 degrees ! Estimated noise=1666.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, -7.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0294527 Jy ! Component: 100 - total flux cleaned = 0.0201289 Jy ! Component: 150 - total flux cleaned = 0.015695 Jy ! Component: 200 - total flux cleaned = 0.0149471 Jy ! Total flux subtracted in 200 components = 0.0149471 Jy ! Clean residual min=-0.014111 max=0.020539 Jy/beam ! Clean residual mean=0.000159 rms=0.004846 Jy/beam ! Combined flux in latest and established models = 1.28514 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 48 components and 1.28514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.531275Jy sigma=0.001718 ! Fit after self-cal, rms=0.531140Jy sigma=0.001717 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.531140Jy sigma=0.001717 ! Fit after self-cal, rms=0.527655Jy sigma=0.001703 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105505 Jy ! Component: 100 - total flux cleaned = 0.00162845 Jy ! Component: 150 - total flux cleaned = 0.0010982 Jy ! Component: 200 - total flux cleaned = 0.000618914 Jy ! Total flux subtracted in 200 components = 0.000618914 Jy ! Clean residual min=-0.012979 max=0.019527 Jy/beam ! Clean residual mean=0.000156 rms=0.004406 Jy/beam ! Combined flux in latest and established models = 1.28576 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 68 components and 1.28576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.526512Jy sigma=0.001699 ! Fit after self-cal, rms=0.526124Jy sigma=0.001698 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.082 x 8.998 at -6.097 degrees (North through East) ! Clean map min=-0.012576 max=0.8868 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.526124Jy sigma=0.001698 ! Fit after self-cal, rms=0.515466Jy sigma=0.001683 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.515466Jy sigma=0.001683 ! Fit after self-cal, rms=0.515434Jy sigma=0.001683 ! Inverting map and beam ! Estimated beam: bmin=2.989 mas, bmaj=8.865 mas, bpa=-6.652 degrees ! Estimated noise=1639.15 mJy/beam. ! Added new window around map position (-13, -10.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214918 Jy ! Component: 100 - total flux cleaned = 0.0257403 Jy ! Component: 150 - total flux cleaned = 0.0261461 Jy ! Component: 200 - total flux cleaned = 0.0261418 Jy ! Total flux subtracted in 200 components = 0.0261418 Jy ! Clean residual min=-0.010274 max=0.011777 Jy/beam ! Clean residual mean=0.000090 rms=0.003036 Jy/beam ! Combined flux in latest and established models = 1.3119 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 87 components and 1.3119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.514144Jy sigma=0.001678 ! Fit after self-cal, rms=0.514049Jy sigma=0.001678 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.514049Jy sigma=0.001678 ! Fit after self-cal, rms=0.513186Jy sigma=0.001675 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513186Jy sigma=0.001675 ! Fit after self-cal, rms=0.513190Jy sigma=0.001675 ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=8.831 mas, bpa=-6.86 degrees ! Estimated noise=1629.94 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00543683 Jy ! Component: 100 - total flux cleaned = 0.00605105 Jy ! Component: 150 - total flux cleaned = 0.0062907 Jy ! Component: 200 - total flux cleaned = 0.0060659 Jy ! Total flux subtracted in 200 components = 0.0060659 Jy ! Clean residual min=-0.009124 max=0.009705 Jy/beam ! Clean residual mean=0.000099 rms=0.002662 Jy/beam ! Combined flux in latest and established models = 1.31797 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 107 components and 1.31797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.512743Jy sigma=0.001674 ! Fit after self-cal, rms=0.512707Jy sigma=0.001674 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.141 mas, bmaj=23.06 mas, bpa=1.038 degrees ! Estimated noise=2128.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012598 Jy ! Component: 100 - total flux cleaned = 0.00187411 Jy ! Component: 150 - total flux cleaned = 0.0018694 Jy ! Component: 200 - total flux cleaned = 0.00176211 Jy ! Total flux subtracted in 200 components = 0.00176211 Jy ! Clean residual min=-0.008631 max=0.009712 Jy/beam ! Clean residual mean=0.000203 rms=0.002756 Jy/beam ! Combined flux in latest and established models = 1.31973 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 118 components and 1.31973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.512589Jy sigma=0.001674 ! Fit after self-cal, rms=0.512564Jy sigma=0.001674 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.624 mas, bmaj=7.036 mas, bpa=-1.211 degrees ! Estimated noise=2409.84 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.880628 Jy ! Component: 100 - total flux cleaned = 1.10849 Jy ! Component: 150 - total flux cleaned = 1.19958 Jy ! Component: 200 - total flux cleaned = 1.25162 Jy ! Total flux subtracted in 200 components = 1.25162 Jy ! Clean residual min=-0.024841 max=0.038742 Jy/beam ! Clean residual mean=0.000045 rms=0.007862 Jy/beam ! Combined flux in latest and established models = 1.25162 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 1.25162 Jy ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=8.831 mas, bpa=-6.86 degrees ! Estimated noise=1629.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0383599 Jy ! Component: 100 - total flux cleaned = 0.0547227 Jy ! Component: 150 - total flux cleaned = 0.0594504 Jy ! Component: 200 - total flux cleaned = 0.0617467 Jy ! Total flux subtracted in 200 components = 0.0617467 Jy ! Clean residual min=-0.009278 max=0.010067 Jy/beam ! Clean residual mean=0.000104 rms=0.002856 Jy/beam ! Combined flux in latest and established models = 1.31337 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 47 components and 1.31337 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.141 mas, bmaj=23.06 mas, bpa=1.038 degrees ! Estimated noise=2128.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138718 Jy ! Component: 100 - total flux cleaned = 0.00160715 Jy ! Component: 150 - total flux cleaned = 0.00177963 Jy ! Component: 200 - total flux cleaned = 0.0022017 Jy ! Total flux subtracted in 200 components = 0.0022017 Jy ! Clean residual min=-0.007527 max=0.009189 Jy/beam ! Clean residual mean=0.000197 rms=0.002662 Jy/beam ! Combined flux in latest and established models = 1.31557 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 70 components and 1.31557 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=8.831 mas, bpa=-6.86 degrees ! Estimated noise=1629.94 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116928 Jy ! Component: 100 - total flux cleaned = 0.000281782 Jy ! Component: 150 - total flux cleaned = -1.00939e-05 Jy ! Component: 200 - total flux cleaned = -0.000272488 Jy ! Total flux subtracted in 200 components = -0.000272488 Jy ! Clean residual min=-0.008146 max=0.009340 Jy/beam ! Clean residual mean=0.000106 rms=0.002431 Jy/beam ! Combined flux in latest and established models = 1.3153 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 1.3153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.511974Jy sigma=0.001672 ! Fit after self-cal, rms=0.511927Jy sigma=0.001672 wmodel J2258-2758_S_1996_01_02_yyk\_map.mod ! Writing 90 model components to file: J2258-2758_S_1996_01_02_yyk_map.mod wobs J2258-2758_S_1996_01_02_yyk\_uvs.fits ! Writing UV FITS file: J2258-2758_S_1996_01_02_yyk_uvs.fits wwins J2258-2758_S_1996_01_02_yyk\_map.win ! wwins: Wrote 4 windows to J2258-2758_S_1996_01_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312174 Jy ! Component: 100 - total flux cleaned = 0.00448027 Jy ! Component: 150 - total flux cleaned = 0.00460352 Jy ! Component: 200 - total flux cleaned = 0.00436354 Jy ! Component: 250 - total flux cleaned = 0.00447545 Jy ! Component: 300 - total flux cleaned = 0.00436584 Jy ! Component: 350 - total flux cleaned = 0.00436686 Jy ! Component: 400 - total flux cleaned = 0.00446669 Jy ! Component: 450 - total flux cleaned = 0.00456277 Jy ! Component: 500 - total flux cleaned = 0.0047519 Jy ! Component: 550 - total flux cleaned = 0.00475091 Jy ! Component: 600 - total flux cleaned = 0.00520385 Jy ! Component: 650 - total flux cleaned = 0.00538045 Jy ! Component: 700 - total flux cleaned = 0.0057251 Jy ! Component: 750 - total flux cleaned = 0.00622799 Jy ! Component: 800 - total flux cleaned = 0.00647498 Jy ! Component: 850 - total flux cleaned = 0.00703517 Jy ! Component: 900 - total flux cleaned = 0.00765996 Jy ! Component: 950 - total flux cleaned = 0.00803903 Jy ! Component: 1000 - total flux cleaned = 0.00841314 Jy ! Component: 1050 - total flux cleaned = 0.00900049 Jy ! Component: 1100 - total flux cleaned = 0.0094312 Jy ! Component: 1150 - total flux cleaned = 0.00957165 Jy ! Component: 1200 - total flux cleaned = 0.00991874 Jy ! Component: 1250 - total flux cleaned = 0.0102584 Jy ! Component: 1300 - total flux cleaned = 0.0105909 Jy ! Component: 1350 - total flux cleaned = 0.0109175 Jy ! Component: 1400 - total flux cleaned = 0.0111096 Jy ! Component: 1450 - total flux cleaned = 0.0113637 Jy ! Component: 1500 - total flux cleaned = 0.0116127 Jy ! Component: 1550 - total flux cleaned = 0.0120417 Jy ! Component: 1600 - total flux cleaned = 0.0121617 Jy ! Component: 1650 - total flux cleaned = 0.0123396 Jy ! Component: 1700 - total flux cleaned = 0.0126913 Jy ! Component: 1750 - total flux cleaned = 0.0129213 Jy ! Component: 1800 - total flux cleaned = 0.0130924 Jy ! Component: 1850 - total flux cleaned = 0.0135414 Jy ! Component: 1900 - total flux cleaned = 0.0136514 Jy ! Component: 1950 - total flux cleaned = 0.0138693 Jy ! Component: 2000 - total flux cleaned = 0.0140859 Jy ! Total flux subtracted in 2048 components = 0.0145146 Jy ! Clean residual min=-0.003126 max=0.003475 Jy/beam ! Clean residual mean=0.000098 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 1.32981 Jy keep ! Adding 118 model components to the UV plane model. ! The established model now contains 208 components and 1.32981 Jy ![Exited script file: muppet] wmap "J2258-2758_S_1996_01_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.962 x 8.831 at -6.86 degrees (North through East) ! Clean map min=-0.0065014 max=0.86911 Jy/beam ! Writing clean map to FITS file: J2258-2758_S_1996_01_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.869114 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00103687 device "J2258-2758_S_1996_01_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J2258-2758_S_1996_01_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.357907 0.357907 0.715814 1.43163 2.86326 5.72651 11.453 22.9061 45.8121 91.6242 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0031 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.869 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.962 x 8.831 at -6.86 degrees (North through East) ! Clean map min=-0.0065014 max=0.86911 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2258-2758_S_1996_01_02_yyk\_map.gif/gif" ! Attempting to open device: 'J2258-2758_S_1996_01_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2258-2758_S_1996_01_02_yyk_uvs.log closed on Sun Jan 7 20:19:08 2007