! Started logfile: J2258-2758_S_1995_07_15_yyk_uvs.log on Sun Jan 7 20:18:54 2007 obs J2258-2758_S_1995_07_15_yyk_uva.fits ! Reading UV FITS file: J2258-2758_S_1995_07_15_yyk_uva.fits ! AN table 1: 188 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.667376 visibilities/baseline/integration-bin. ! Found source: J2258-2758 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 4e+06 1 4e+06 ! 02 2 2.23236e+09 4e+06 1 4e+06 ! 03 3 2.29236e+09 4e+06 1 4e+06 ! 04 4 2.32236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 793 lines of history. ! ! Reading 22584 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2258-2758_S_1995_07_15_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.31378 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.77 mas, bmaj=7.288 mas, bpa=-6.354 degrees ! Estimated noise=2575.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.900808 Jy ! Component: 100 - total flux cleaned = 1.18423 Jy ! Total flux subtracted in 100 components = 1.18423 Jy ! Clean residual min=-0.065703 max=0.102812 Jy/beam ! Clean residual mean=0.000579 rms=0.019324 Jy/beam ! Combined flux in latest and established models = 1.18423 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.18423 Jy ! ! Correcting IF 1. ! A total of 392 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 421 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 392 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 392 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.591502Jy sigma=0.001981 ! Fit after self-cal, rms=0.589897Jy sigma=0.001975 ! Inverting map and beam ! Estimated beam: bmin=2.77 mas, bmaj=7.288 mas, bpa=-6.355 degrees ! Estimated noise=2592.41 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=10.18 mas, bpa=-6.558 degrees ! Estimated noise=1235.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.158323 Jy ! Component: 100 - total flux cleaned = 0.20202 Jy ! Component: 150 - total flux cleaned = 0.203939 Jy ! Component: 200 - total flux cleaned = 0.203159 Jy ! Total flux subtracted in 200 components = 0.203159 Jy ! Clean residual min=-0.034400 max=0.039355 Jy/beam ! Clean residual mean=0.000130 rms=0.010628 Jy/beam ! Combined flux in latest and established models = 1.38739 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 1.38739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.557596Jy sigma=0.001854 ! Fit after self-cal, rms=0.557278Jy sigma=0.001853 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.633 x 10.18 at -6.558 degrees (North through East) ! Clean map min=-0.033923 max=1.0416 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00532 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.06 HN 1.14 KP 0.89 ! LA 0.97 MK 0.98 NL 0.92 OV 1.16 ! PT 1.02 SC 0.82 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.989625 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.14 HN 1.21 KP 0.87 ! LA 1.04 MK 0.97 NL 0.94 OV 1.08 ! PT 1.01 SC 0.88 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.0411 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.08 HN 1.05 KP 0.91 ! LA 0.87 MK 0.85 NL 0.99 OV 0.96 ! PT 1.06 SC 0.94 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01394 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.13 HN 1.16 KP 0.93 ! LA 0.93 MK 0.96 NL 1.02 OV 0.98 ! PT 0.92 SC 0.88 ! ! ! Fit before self-cal, rms=0.557278Jy sigma=0.001853 ! Fit after self-cal, rms=0.533687Jy sigma=0.001783 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.533687Jy sigma=0.001783 ! Fit after self-cal, rms=0.533670Jy sigma=0.001783 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=9.47 mas, bpa=-4.909 degrees ! Estimated noise=1242.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, -5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0471228 Jy ! Component: 100 - total flux cleaned = 0.0597427 Jy ! Component: 150 - total flux cleaned = 0.0603642 Jy ! Component: 200 - total flux cleaned = 0.0609307 Jy ! Total flux subtracted in 200 components = 0.0609307 Jy ! Clean residual min=-0.018299 max=0.024078 Jy/beam ! Clean residual mean=0.000064 rms=0.005100 Jy/beam ! Combined flux in latest and established models = 1.44832 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 39 components and 1.44832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.530260Jy sigma=0.001769 ! Fit after self-cal, rms=0.529999Jy sigma=0.001768 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.529999Jy sigma=0.001768 ! Fit after self-cal, rms=0.523846Jy sigma=0.001749 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00623273 Jy ! Component: 100 - total flux cleaned = 0.0072969 Jy ! Component: 150 - total flux cleaned = 0.00777578 Jy ! Component: 200 - total flux cleaned = 0.00779 Jy ! Total flux subtracted in 200 components = 0.00779 Jy ! Clean residual min=-0.017921 max=0.021166 Jy/beam ! Clean residual mean=0.000017 rms=0.004822 Jy/beam ! Combined flux in latest and established models = 1.45611 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 55 components and 1.45611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.522810Jy sigma=0.001746 ! Fit after self-cal, rms=0.522011Jy sigma=0.001743 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.517 x 9.47 at -4.909 degrees (North through East) ! Clean map min=-0.018749 max=1.0537 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.522011Jy sigma=0.001743 ! Fit after self-cal, rms=0.688879Jy sigma=0.001706 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.688879Jy sigma=0.001706 ! Fit after self-cal, rms=0.688823Jy sigma=0.001705 ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=9.333 mas, bpa=-5.594 degrees ! Estimated noise=1224.55 mJy/beam. ! Added new window around map position (-19.5, -10). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0237358 Jy ! Component: 100 - total flux cleaned = 0.029641 Jy ! Component: 150 - total flux cleaned = 0.0308857 Jy ! Component: 200 - total flux cleaned = 0.0312495 Jy ! Total flux subtracted in 200 components = 0.0312495 Jy ! Clean residual min=-0.011515 max=0.011119 Jy/beam ! Clean residual mean=-0.000060 rms=0.002911 Jy/beam ! Combined flux in latest and established models = 1.48736 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 80 components and 1.48736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.688205Jy sigma=0.001701 ! Fit after self-cal, rms=0.688186Jy sigma=0.001701 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.688186Jy sigma=0.001701 ! Fit after self-cal, rms=0.690811Jy sigma=0.001698 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.690811Jy sigma=0.001698 ! Fit after self-cal, rms=0.690815Jy sigma=0.001698 ! Inverting map and beam ! Estimated beam: bmin=3.449 mas, bmaj=9.299 mas, bpa=-5.666 degrees ! Estimated noise=1221.82 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00561273 Jy ! Component: 100 - total flux cleaned = 0.00655519 Jy ! Component: 150 - total flux cleaned = 0.00711576 Jy ! Component: 200 - total flux cleaned = 0.00686053 Jy ! Total flux subtracted in 200 components = 0.00686053 Jy ! Clean residual min=-0.011161 max=0.009772 Jy/beam ! Clean residual mean=-0.000064 rms=0.002690 Jy/beam ! Combined flux in latest and established models = 1.49422 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 92 components and 1.49422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.690601Jy sigma=0.001697 ! Fit after self-cal, rms=0.690609Jy sigma=0.001697 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.213 mas, bmaj=19.44 mas, bpa=-1.61 degrees ! Estimated noise=1525.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00165166 Jy ! Component: 100 - total flux cleaned = -0.00109206 Jy ! Component: 150 - total flux cleaned = -0.00136162 Jy ! Component: 200 - total flux cleaned = -0.00160138 Jy ! Total flux subtracted in 200 components = -0.00160138 Jy ! Clean residual min=-0.007237 max=0.008131 Jy/beam ! Clean residual mean=-0.000076 rms=0.002300 Jy/beam ! Combined flux in latest and established models = 1.49262 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 104 components and 1.49262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.690470Jy sigma=0.001697 ! Fit after self-cal, rms=0.690483Jy sigma=0.001697 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.707 mas, bmaj=6.966 mas, bpa=-6.376 degrees ! Estimated noise=2577.96 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.911408 Jy ! Component: 100 - total flux cleaned = 1.20387 Jy ! Component: 150 - total flux cleaned = 1.32993 Jy ! Component: 200 - total flux cleaned = 1.39536 Jy ! Total flux subtracted in 200 components = 1.39536 Jy ! Clean residual min=-0.026702 max=0.035693 Jy/beam ! Clean residual mean=0.000163 rms=0.007121 Jy/beam ! Combined flux in latest and established models = 1.39536 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 1.39536 Jy ! Inverting map and beam ! Estimated beam: bmin=3.449 mas, bmaj=9.299 mas, bpa=-5.666 degrees ! Estimated noise=1221.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0496704 Jy ! Component: 100 - total flux cleaned = 0.0770327 Jy ! Component: 150 - total flux cleaned = 0.0901728 Jy ! Component: 200 - total flux cleaned = 0.0935611 Jy ! Total flux subtracted in 200 components = 0.0935611 Jy ! Clean residual min=-0.013361 max=0.011837 Jy/beam ! Clean residual mean=-0.000014 rms=0.003181 Jy/beam ! Combined flux in latest and established models = 1.48892 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 51 components and 1.48892 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.213 mas, bmaj=19.44 mas, bpa=-1.61 degrees ! Estimated noise=1525.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00941654 Jy ! Component: 100 - total flux cleaned = 0.00967497 Jy ! Component: 150 - total flux cleaned = 0.00924936 Jy ! Component: 200 - total flux cleaned = 0.00904772 Jy ! Total flux subtracted in 200 components = 0.00904772 Jy ! Clean residual min=-0.008333 max=0.007817 Jy/beam ! Clean residual mean=-0.000184 rms=0.002642 Jy/beam ! Combined flux in latest and established models = 1.49797 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 71 components and 1.49797 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.449 mas, bmaj=9.299 mas, bpa=-5.666 degrees ! Estimated noise=1221.82 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0022044 Jy ! Component: 100 - total flux cleaned = -0.00188382 Jy ! Component: 150 - total flux cleaned = -0.0018767 Jy ! Component: 200 - total flux cleaned = -0.00159234 Jy ! Total flux subtracted in 200 components = -0.00159234 Jy ! Clean residual min=-0.010886 max=0.010987 Jy/beam ! Clean residual mean=-0.000086 rms=0.002775 Jy/beam ! Combined flux in latest and established models = 1.49637 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 78 components and 1.49637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.690780Jy sigma=0.001698 ! Fit after self-cal, rms=0.690696Jy sigma=0.001697 wmodel J2258-2758_S_1995_07_15_yyk\_map.mod ! Writing 78 model components to file: J2258-2758_S_1995_07_15_yyk_map.mod wobs J2258-2758_S_1995_07_15_yyk\_uvs.fits ! Writing UV FITS file: J2258-2758_S_1995_07_15_yyk_uvs.fits wwins J2258-2758_S_1995_07_15_yyk\_map.win ! wwins: Wrote 3 windows to J2258-2758_S_1995_07_15_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0048661 Jy ! Component: 100 - total flux cleaned = -0.00693119 Jy ! Component: 150 - total flux cleaned = -0.00883172 Jy ! Component: 200 - total flux cleaned = -0.0101768 Jy ! Component: 250 - total flux cleaned = -0.0114556 Jy ! Component: 300 - total flux cleaned = -0.0128149 Jy ! Component: 350 - total flux cleaned = -0.0141189 Jy ! Component: 400 - total flux cleaned = -0.0153773 Jy ! Component: 450 - total flux cleaned = -0.0161104 Jy ! Component: 500 - total flux cleaned = -0.0167054 Jy ! Component: 550 - total flux cleaned = -0.0170539 Jy ! Component: 600 - total flux cleaned = -0.0173942 Jy ! Component: 650 - total flux cleaned = -0.0176157 Jy ! Component: 700 - total flux cleaned = -0.018049 Jy ! Component: 750 - total flux cleaned = -0.0183645 Jy ! Component: 800 - total flux cleaned = -0.0185699 Jy ! Component: 850 - total flux cleaned = -0.0189711 Jy ! Component: 900 - total flux cleaned = -0.0190693 Jy ! Component: 950 - total flux cleaned = -0.0193581 Jy ! Component: 1000 - total flux cleaned = -0.0194513 Jy ! Component: 1050 - total flux cleaned = -0.019268 Jy ! Component: 1100 - total flux cleaned = -0.0192692 Jy ! Component: 1150 - total flux cleaned = -0.019003 Jy ! Component: 1200 - total flux cleaned = -0.0189164 Jy ! Component: 1250 - total flux cleaned = -0.0188326 Jy ! Component: 1300 - total flux cleaned = -0.0189183 Jy ! Component: 1350 - total flux cleaned = -0.0188353 Jy ! Component: 1400 - total flux cleaned = -0.0189178 Jy ! Component: 1450 - total flux cleaned = -0.0189991 Jy ! Component: 1500 - total flux cleaned = -0.0189194 Jy ! Component: 1550 - total flux cleaned = -0.0189195 Jy ! Component: 1600 - total flux cleaned = -0.0186884 Jy ! Component: 1650 - total flux cleaned = -0.0187631 Jy ! Component: 1700 - total flux cleaned = -0.0185374 Jy ! Component: 1750 - total flux cleaned = -0.0183166 Jy ! Component: 1800 - total flux cleaned = -0.0183174 Jy ! Component: 1850 - total flux cleaned = -0.0180306 Jy ! Component: 1900 - total flux cleaned = -0.0180314 Jy ! Component: 1950 - total flux cleaned = -0.0179614 Jy ! Component: 2000 - total flux cleaned = -0.0180301 Jy ! Total flux subtracted in 2048 components = -0.0179609 Jy ! Clean residual min=-0.004087 max=0.003947 Jy/beam ! Clean residual mean=0.000094 rms=0.001387 Jy/beam ! Combined flux in latest and established models = 1.47841 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 203 components and 1.47841 Jy ![Exited script file: muppet] wmap "J2258-2758_S_1995_07_15_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.449 x 9.299 at -5.666 degrees (North through East) ! Clean map min=-0.0069285 max=1.0326 Jy/beam ! Writing clean map to FITS file: J2258-2758_S_1995_07_15_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.03256 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00138193 device "J2258-2758_S_1995_07_15_yyk\_map.eps/VPS" ! Attempting to open device: 'J2258-2758_S_1995_07_15_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.401505 0.401505 0.80301 1.60602 3.21204 6.42408 12.8482 25.6963 51.3926 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0041 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.032 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.449 x 9.299 at -5.666 degrees (North through East) ! Clean map min=-0.0069285 max=1.0326 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2258-2758_S_1995_07_15_yyk\_map.gif/gif" ! Attempting to open device: 'J2258-2758_S_1995_07_15_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2258-2758_S_1995_07_15_yyk_uvs.log closed on Sun Jan 7 20:19:02 2007