! Started logfile: J2258-2758_S_1995_04_19_yyk_uvs.log on Sun Jan 7 20:18:48 2007 obs J2258-2758_S_1995_04_19_yyk_uva.fits ! Reading UV FITS file: J2258-2758_S_1995_04_19_yyk_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.782937 visibilities/baseline/integration-bin. ! Found source: J2258-2758 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 4e+06 1 4e+06 ! 02 2 2.23236e+09 4e+06 1 4e+06 ! 03 3 2.29236e+09 4e+06 1 4e+06 ! 04 4 2.32236e+09 4e+06 1 4e+06 ! ! Polarization(s): RR ! ! Read 976 lines of history. ! ! Reading 7892 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2258-2758_S_1995_04_19_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.14657 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.658 mas, bmaj=8.051 mas, bpa=1.672 degrees ! Estimated noise=2341.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.892923 Jy ! Component: 100 - total flux cleaned = 1.13903 Jy ! Total flux subtracted in 100 components = 1.13903 Jy ! Clean residual min=-0.050413 max=0.094954 Jy/beam ! Clean residual mean=0.000249 rms=0.016581 Jy/beam ! Combined flux in latest and established models = 1.13903 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.13903 Jy ! ! Correcting IF 1. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.414009Jy sigma=0.002178 ! Fit after self-cal, rms=0.410441Jy sigma=0.002145 ! Inverting map and beam ! Estimated beam: bmin=2.658 mas, bmaj=8.052 mas, bpa=1.671 degrees ! Estimated noise=2343.03 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.361 mas, bmaj=10.42 mas, bpa=-4.282 degrees ! Estimated noise=1347.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -3.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0829696 Jy ! Component: 100 - total flux cleaned = 0.0933316 Jy ! Component: 150 - total flux cleaned = 0.0931999 Jy ! Component: 200 - total flux cleaned = 0.0919706 Jy ! Total flux subtracted in 200 components = 0.0919706 Jy ! Clean residual min=-0.037032 max=0.039889 Jy/beam ! Clean residual mean=0.000741 rms=0.009665 Jy/beam ! Combined flux in latest and established models = 1.231 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 33 components and 1.231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.392910Jy sigma=0.002052 ! Fit after self-cal, rms=0.392176Jy sigma=0.002048 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.361 x 10.42 at -4.282 degrees (North through East) ! Clean map min=-0.036101 max=0.90872 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.05131 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.02 HN 1.09 KP 1.06 ! LA 0.93 MK 0.70 NL 0.88 OV 1.03 ! PT 0.99 SC 0.85 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.925095 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.11 HN 1.18 KP 1.28 ! LA 1.01 MK 1.51 NL 0.86 OV 1.00 ! PT 0.99 SC 0.89 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00941 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.04 HN 1.02 KP 1.06 ! LA 0.77 MK 1.14 NL 0.97 OV 0.92 ! PT 1.10 SC 0.97 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03652 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.08 HN 1.18 KP 1.17 ! LA 0.84 MK 0.64 NL 0.92 OV 0.99 ! PT 0.95 SC 0.93 ! ! ! Fit before self-cal, rms=0.392176Jy sigma=0.002048 ! Fit after self-cal, rms=0.377263Jy sigma=0.001968 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.377263Jy sigma=0.001968 ! Fit after self-cal, rms=0.377293Jy sigma=0.001968 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=9.636 mas, bpa=-4.832 degrees ! Estimated noise=1292.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133088 Jy ! Component: 100 - total flux cleaned = 0.0115437 Jy ! Component: 150 - total flux cleaned = 0.0121581 Jy ! Component: 200 - total flux cleaned = 0.0121702 Jy ! Total flux subtracted in 200 components = 0.0121702 Jy ! Clean residual min=-0.015581 max=0.020803 Jy/beam ! Clean residual mean=-0.000120 rms=0.004938 Jy/beam ! Combined flux in latest and established models = 1.24317 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 55 components and 1.24317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.373499Jy sigma=0.001946 ! Fit after self-cal, rms=0.373329Jy sigma=0.001944 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.373329Jy sigma=0.001944 ! Fit after self-cal, rms=0.363711Jy sigma=0.001882 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021716 Jy ! Component: 100 - total flux cleaned = 0.0046505 Jy ! Component: 150 - total flux cleaned = 0.0056951 Jy ! Component: 200 - total flux cleaned = 0.00665133 Jy ! Total flux subtracted in 200 components = 0.00665133 Jy ! Clean residual min=-0.015652 max=0.018157 Jy/beam ! Clean residual mean=-0.000114 rms=0.004754 Jy/beam ! Combined flux in latest and established models = 1.24983 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 72 components and 1.24983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.362005Jy sigma=0.001873 ! Fit after self-cal, rms=0.361393Jy sigma=0.001868 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.15 x 9.636 at -4.832 degrees (North through East) ! Clean map min=-0.020452 max=0.87711 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.361393Jy sigma=0.001868 ! Fit after self-cal, rms=0.335401Jy sigma=0.001729 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.335401Jy sigma=0.001729 ! Fit after self-cal, rms=0.335353Jy sigma=0.001729 ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=9.479 mas, bpa=-5.664 degrees ! Estimated noise=1258.55 mJy/beam. ! Added new window around map position (-10, -3.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0239053 Jy ! Component: 100 - total flux cleaned = 0.0292772 Jy ! Component: 150 - total flux cleaned = 0.0305028 Jy ! Component: 200 - total flux cleaned = 0.0308706 Jy ! Total flux subtracted in 200 components = 0.0308706 Jy ! Clean residual min=-0.012426 max=0.013930 Jy/beam ! Clean residual mean=-0.000046 rms=0.003121 Jy/beam ! Combined flux in latest and established models = 1.2807 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 101 components and 1.2807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333553Jy sigma=0.001718 ! Fit after self-cal, rms=0.333524Jy sigma=0.001718 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333524Jy sigma=0.001718 ! Fit after self-cal, rms=0.334283Jy sigma=0.001704 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.334283Jy sigma=0.001704 ! Fit after self-cal, rms=0.334308Jy sigma=0.001704 ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=9.433 mas, bpa=-5.963 degrees ! Estimated noise=1250.29 mJy/beam. ! Added new window around map position (4, 2.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00499056 Jy ! Component: 100 - total flux cleaned = 0.00963816 Jy ! Component: 150 - total flux cleaned = 0.0115043 Jy ! Component: 200 - total flux cleaned = 0.0128237 Jy ! Total flux subtracted in 200 components = 0.0128237 Jy ! Clean residual min=-0.008647 max=0.010598 Jy/beam ! Clean residual mean=-0.000031 rms=0.002464 Jy/beam ! Combined flux in latest and established models = 1.29352 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 127 components and 1.29352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333025Jy sigma=0.001697 ! Fit after self-cal, rms=0.332953Jy sigma=0.001697 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.86 mas, bmaj=20.4 mas, bpa=0.5435 degrees ! Estimated noise=1639.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000955787 Jy ! Component: 100 - total flux cleaned = 0.000814578 Jy ! Component: 150 - total flux cleaned = 0.000555001 Jy ! Component: 200 - total flux cleaned = 0.000310928 Jy ! Total flux subtracted in 200 components = 0.000310929 Jy ! Clean residual min=-0.008330 max=0.010680 Jy/beam ! Clean residual mean=-0.000099 rms=0.003101 Jy/beam ! Combined flux in latest and established models = 1.29383 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 146 components and 1.29383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.332715Jy sigma=0.001696 ! Fit after self-cal, rms=0.332706Jy sigma=0.001696 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.558 mas, bmaj=7.743 mas, bpa=1.099 degrees ! Estimated noise=2134.62 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.833476 Jy ! Component: 100 - total flux cleaned = 1.06873 Jy ! Component: 150 - total flux cleaned = 1.17446 Jy ! Component: 200 - total flux cleaned = 1.2183 Jy ! Total flux subtracted in 200 components = 1.2183 Jy ! Clean residual min=-0.022553 max=0.026435 Jy/beam ! Clean residual mean=0.000008 rms=0.006690 Jy/beam ! Combined flux in latest and established models = 1.2183 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 1.2183 Jy ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=9.433 mas, bpa=-5.963 degrees ! Estimated noise=1250.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.042162 Jy ! Component: 100 - total flux cleaned = 0.0558919 Jy ! Component: 150 - total flux cleaned = 0.0637741 Jy ! Component: 200 - total flux cleaned = 0.0678041 Jy ! Total flux subtracted in 200 components = 0.0678041 Jy ! Clean residual min=-0.010428 max=0.012635 Jy/beam ! Clean residual mean=-0.000030 rms=0.003119 Jy/beam ! Combined flux in latest and established models = 1.2861 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 66 components and 1.2861 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.86 mas, bmaj=20.4 mas, bpa=0.5435 degrees ! Estimated noise=1639.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00559421 Jy ! Component: 100 - total flux cleaned = 0.00526175 Jy ! Component: 150 - total flux cleaned = 0.00496978 Jy ! Component: 200 - total flux cleaned = 0.00470102 Jy ! Total flux subtracted in 200 components = 0.00470102 Jy ! Clean residual min=-0.009889 max=0.010568 Jy/beam ! Clean residual mean=-0.000086 rms=0.003330 Jy/beam ! Combined flux in latest and established models = 1.2908 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 92 components and 1.2908 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=9.433 mas, bpa=-5.963 degrees ! Estimated noise=1250.29 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000163008 Jy ! Component: 100 - total flux cleaned = 0.000649353 Jy ! Component: 150 - total flux cleaned = 0.00133835 Jy ! Component: 200 - total flux cleaned = 0.0010244 Jy ! Total flux subtracted in 200 components = 0.0010244 Jy ! Clean residual min=-0.009013 max=0.011809 Jy/beam ! Clean residual mean=-0.000031 rms=0.002588 Jy/beam ! Combined flux in latest and established models = 1.29183 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 116 components and 1.29183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333163Jy sigma=0.001698 ! Fit after self-cal, rms=0.333093Jy sigma=0.001698 wmodel J2258-2758_S_1995_04_19_yyk\_map.mod ! Writing 116 model components to file: J2258-2758_S_1995_04_19_yyk_map.mod wobs J2258-2758_S_1995_04_19_yyk\_uvs.fits ! Writing UV FITS file: J2258-2758_S_1995_04_19_yyk_uvs.fits wwins J2258-2758_S_1995_04_19_yyk\_map.win ! wwins: Wrote 4 windows to J2258-2758_S_1995_04_19_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00397747 Jy ! Component: 100 - total flux cleaned = 0.00640705 Jy ! Component: 150 - total flux cleaned = 0.00739072 Jy ! Component: 200 - total flux cleaned = 0.00791493 Jy ! Component: 250 - total flux cleaned = 0.00816294 Jy ! Component: 300 - total flux cleaned = 0.00852622 Jy ! Component: 350 - total flux cleaned = 0.00875793 Jy ! Component: 400 - total flux cleaned = 0.00909299 Jy ! Component: 450 - total flux cleaned = 0.00920411 Jy ! Component: 500 - total flux cleaned = 0.00983796 Jy ! Component: 550 - total flux cleaned = 0.0101475 Jy ! Component: 600 - total flux cleaned = 0.0107496 Jy ! Component: 650 - total flux cleaned = 0.010847 Jy ! Component: 700 - total flux cleaned = 0.0107512 Jy ! Component: 750 - total flux cleaned = 0.0107499 Jy ! Component: 800 - total flux cleaned = 0.0105665 Jy ! Component: 850 - total flux cleaned = 0.0105672 Jy ! Component: 900 - total flux cleaned = 0.0103916 Jy ! Component: 950 - total flux cleaned = 0.0102192 Jy ! Component: 1000 - total flux cleaned = 0.010304 Jy ! Component: 1050 - total flux cleaned = 0.0102198 Jy ! Component: 1100 - total flux cleaned = 0.00997453 Jy ! Component: 1150 - total flux cleaned = 0.00973378 Jy ! Component: 1200 - total flux cleaned = 0.00973377 Jy ! Component: 1250 - total flux cleaned = 0.00981028 Jy ! Component: 1300 - total flux cleaned = 0.00965612 Jy ! Component: 1350 - total flux cleaned = 0.0098079 Jy ! Component: 1400 - total flux cleaned = 0.00958393 Jy ! Component: 1450 - total flux cleaned = 0.00965825 Jy ! Component: 1500 - total flux cleaned = 0.00980183 Jy ! Component: 1550 - total flux cleaned = 0.00972938 Jy ! Component: 1600 - total flux cleaned = 0.0095898 Jy ! Component: 1650 - total flux cleaned = 0.00959022 Jy ! Component: 1700 - total flux cleaned = 0.00972518 Jy ! Component: 1750 - total flux cleaned = 0.00952324 Jy ! Component: 1800 - total flux cleaned = 0.00945734 Jy ! Component: 1850 - total flux cleaned = 0.00978485 Jy ! Component: 1900 - total flux cleaned = 0.00978454 Jy ! Component: 1950 - total flux cleaned = 0.0100384 Jy ! Component: 2000 - total flux cleaned = 0.00991114 Jy ! Total flux subtracted in 2048 components = 0.00997233 Jy ! Clean residual min=-0.003634 max=0.003355 Jy/beam ! Clean residual mean=-0.000032 rms=0.001267 Jy/beam ! Combined flux in latest and established models = 1.3018 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 257 components and 1.3018 Jy ![Exited script file: muppet] wmap "J2258-2758_S_1995_04_19_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.005 x 9.433 at -5.963 degrees (North through East) ! Clean map min=-0.018944 max=0.82611 Jy/beam ! Writing clean map to FITS file: J2258-2758_S_1995_04_19_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.826106 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0012798 device "J2258-2758_S_1995_04_19_yyk\_map.eps/VPS" ! Attempting to open device: 'J2258-2758_S_1995_04_19_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.464757 0.464757 0.929515 1.85903 3.71806 7.43612 14.8722 29.7445 59.489 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0038 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.826 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.005 x 9.433 at -5.963 degrees (North through East) ! Clean map min=-0.018944 max=0.82611 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2258-2758_S_1995_04_19_yyk\_map.gif/gif" ! Attempting to open device: 'J2258-2758_S_1995_04_19_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2258-2758_S_1995_04_19_yyk_uvs.log closed on Sun Jan 7 20:18:54 2007