! Started logfile: J2256-2735_S_1997_08_27_yyk_uvs.log on Sun Jan 7 20:18:28 2007 obs J2256-2735_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J2256-2735_S_1997_08_27_yyk_uva.fits ! AN table 1: 106 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.64717 visibilities/baseline/integration-bin. ! Found source: J2256-2735 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 12348 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2256-2735_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.9424 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=6.089 mas, bpa=-24.22 degrees ! Estimated noise=4983.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.13923 Jy ! Component: 100 - total flux cleaned = 0.194923 Jy ! Total flux subtracted in 100 components = 0.194923 Jy ! Clean residual min=-0.039573 max=0.048617 Jy/beam ! Clean residual mean=-0.000021 rms=0.011736 Jy/beam ! Combined flux in latest and established models = 0.194923 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.194923 Jy ! ! Correcting IF 1. ! A total of 326 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 250 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.934144Jy sigma=0.004539 ! Fit after self-cal, rms=1.933907Jy sigma=0.004538 ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=6.089 mas, bpa=-24.22 degrees ! Estimated noise=4984.01 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.431 mas, bmaj=7.716 mas, bpa=-16.97 degrees ! Estimated noise=2053.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0449301 Jy ! Component: 100 - total flux cleaned = 0.0502652 Jy ! Component: 150 - total flux cleaned = 0.0514742 Jy ! Component: 200 - total flux cleaned = 0.0525161 Jy ! Total flux subtracted in 200 components = 0.0525161 Jy ! Clean residual min=-0.023145 max=0.025040 Jy/beam ! Clean residual mean=-0.000116 rms=0.007313 Jy/beam ! Combined flux in latest and established models = 0.247439 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 27 components and 0.247439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.932882Jy sigma=0.004535 ! Fit after self-cal, rms=1.932807Jy sigma=0.004534 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.431 x 7.716 at -16.97 degrees (North through East) ! Clean map min=-0.023433 max=0.15829 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=1.932807Jy sigma=0.004534 ! Fit after self-cal, rms=1.932807Jy sigma=0.004534 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.932807Jy sigma=0.004534 ! Fit after self-cal, rms=1.932806Jy sigma=0.004534 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.431 mas, bmaj=7.716 mas, bpa=-16.97 degrees ! Estimated noise=2053.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015443 Jy ! Component: 100 - total flux cleaned = 0.00199405 Jy ! Component: 150 - total flux cleaned = 0.0023781 Jy ! Component: 200 - total flux cleaned = 0.00302951 Jy ! Total flux subtracted in 200 components = 0.00302951 Jy ! Clean residual min=-0.023865 max=0.024522 Jy/beam ! Clean residual mean=-0.000116 rms=0.007028 Jy/beam ! Combined flux in latest and established models = 0.250468 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.250468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.932583Jy sigma=0.004534 ! Fit after self-cal, rms=1.932582Jy sigma=0.004534 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.932582Jy sigma=0.004534 ! Fit after self-cal, rms=1.931828Jy sigma=0.004531 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00819841 Jy ! Component: 100 - total flux cleaned = 0.0087106 Jy ! Component: 150 - total flux cleaned = 0.00923646 Jy ! Component: 200 - total flux cleaned = 0.00922688 Jy ! Total flux subtracted in 200 components = 0.00922688 Jy ! Clean residual min=-0.026115 max=0.026512 Jy/beam ! Clean residual mean=-0.000112 rms=0.008251 Jy/beam ! Combined flux in latest and established models = 0.259695 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 46 components and 0.259695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.931334Jy sigma=0.004530 ! Fit after self-cal, rms=1.930542Jy sigma=0.004528 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.431 x 7.716 at -16.97 degrees (North through East) ! Clean map min=-0.02772 max=0.17219 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.930542Jy sigma=0.004528 ! Fit after self-cal, rms=1.930542Jy sigma=0.004528 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.930542Jy sigma=0.004528 ! Fit after self-cal, rms=1.930423Jy sigma=0.004528 ! Inverting map and beam ! Estimated beam: bmin=3.431 mas, bmaj=7.716 mas, bpa=-16.97 degrees ! Estimated noise=2053.07 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000710669 Jy ! Component: 100 - total flux cleaned = -0.00196155 Jy ! Component: 150 - total flux cleaned = -0.0025379 Jy ! Component: 200 - total flux cleaned = -0.00304515 Jy ! Total flux subtracted in 200 components = -0.00304515 Jy ! Clean residual min=-0.027812 max=0.026749 Jy/beam ! Clean residual mean=-0.000130 rms=0.008971 Jy/beam ! Combined flux in latest and established models = 0.25665 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.25665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.929943Jy sigma=0.004527 ! Fit after self-cal, rms=1.929702Jy sigma=0.004526 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.929702Jy sigma=0.004526 ! Fit after self-cal, rms=1.929702Jy sigma=0.004526 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.929702Jy sigma=0.004526 ! Fit after self-cal, rms=1.929613Jy sigma=0.004526 ! Inverting map and beam ! Estimated beam: bmin=3.431 mas, bmaj=7.716 mas, bpa=-16.97 degrees ! Estimated noise=2053.07 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118394 Jy ! Component: 100 - total flux cleaned = 0.00010265 Jy ! Component: 150 - total flux cleaned = 0.000108474 Jy ! Component: 200 - total flux cleaned = 7.59058e-05 Jy ! Total flux subtracted in 200 components = 7.59058e-05 Jy ! Clean residual min=-0.028646 max=0.027654 Jy/beam ! Clean residual mean=-0.000139 rms=0.009009 Jy/beam ! Combined flux in latest and established models = 0.256726 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.256726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.929205Jy sigma=0.004525 ! Fit after self-cal, rms=1.929140Jy sigma=0.004525 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.587 mas, bmaj=15.43 mas, bpa=-12.87 degrees ! Estimated noise=2634.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0020785 Jy ! Component: 100 - total flux cleaned = -0.00249043 Jy ! Component: 150 - total flux cleaned = -0.00272816 Jy ! Component: 200 - total flux cleaned = -0.00294431 Jy ! Total flux subtracted in 200 components = -0.00294431 Jy ! Clean residual min=-0.025554 max=0.022069 Jy/beam ! Clean residual mean=-0.000273 rms=0.008036 Jy/beam ! Combined flux in latest and established models = 0.253782 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 65 components and 0.253782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.929091Jy sigma=0.004525 ! Fit after self-cal, rms=1.929053Jy sigma=0.004525 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=6.089 mas, bpa=-24.22 degrees ! Estimated noise=4984.01 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.163247 Jy ! Component: 100 - total flux cleaned = 0.21728 Jy ! Component: 150 - total flux cleaned = 0.227256 Jy ! Component: 200 - total flux cleaned = 0.232719 Jy ! Total flux subtracted in 200 components = 0.232719 Jy ! Clean residual min=-0.039670 max=0.046242 Jy/beam ! Clean residual mean=-0.000113 rms=0.013723 Jy/beam ! Combined flux in latest and established models = 0.232719 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.232719 Jy ! Inverting map and beam ! Estimated beam: bmin=3.431 mas, bmaj=7.716 mas, bpa=-16.97 degrees ! Estimated noise=2053.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175445 Jy ! Component: 100 - total flux cleaned = 0.018425 Jy ! Component: 150 - total flux cleaned = 0.0200344 Jy ! Component: 200 - total flux cleaned = 0.0214699 Jy ! Total flux subtracted in 200 components = 0.0214699 Jy ! Clean residual min=-0.029000 max=0.028513 Jy/beam ! Clean residual mean=-0.000145 rms=0.009285 Jy/beam ! Combined flux in latest and established models = 0.254189 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.254189 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.587 mas, bmaj=15.43 mas, bpa=-12.87 degrees ! Estimated noise=2634.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197173 Jy ! Component: 100 - total flux cleaned = 0.00176729 Jy ! Component: 150 - total flux cleaned = 0.00127873 Jy ! Component: 200 - total flux cleaned = 0.00112915 Jy ! Total flux subtracted in 200 components = 0.00112915 Jy ! Clean residual min=-0.026051 max=0.021515 Jy/beam ! Clean residual mean=-0.000250 rms=0.008089 Jy/beam ! Combined flux in latest and established models = 0.255318 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.255318 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.431 mas, bmaj=7.716 mas, bpa=-16.97 degrees ! Estimated noise=2053.07 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101563 Jy ! Component: 100 - total flux cleaned = 0.00106497 Jy ! Component: 150 - total flux cleaned = 0.00114458 Jy ! Component: 200 - total flux cleaned = 0.00168439 Jy ! Total flux subtracted in 200 components = 0.00168439 Jy ! Clean residual min=-0.028812 max=0.027457 Jy/beam ! Clean residual mean=-0.000137 rms=0.009145 Jy/beam ! Combined flux in latest and established models = 0.257002 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.257002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.929131Jy sigma=0.004525 ! Fit after self-cal, rms=1.929082Jy sigma=0.004525 wmodel J2256-2735_S_1997_08_27_yyk\_map.mod ! Writing 35 model components to file: J2256-2735_S_1997_08_27_yyk_map.mod wobs J2256-2735_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J2256-2735_S_1997_08_27_yyk_uvs.fits wwins J2256-2735_S_1997_08_27_yyk\_map.win ! wwins: Wrote 1 windows to J2256-2735_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00620717 Jy ! Component: 100 - total flux cleaned = -0.0132403 Jy ! Component: 150 - total flux cleaned = -0.0168275 Jy ! Component: 200 - total flux cleaned = -0.0159981 Jy ! Component: 250 - total flux cleaned = -0.0147925 Jy ! Component: 300 - total flux cleaned = -0.0140189 Jy ! Component: 350 - total flux cleaned = -0.0128827 Jy ! Component: 400 - total flux cleaned = -0.0114051 Jy ! Component: 450 - total flux cleaned = -0.00961671 Jy ! Component: 500 - total flux cleaned = -0.00752792 Jy ! Component: 550 - total flux cleaned = -0.00616921 Jy ! Component: 600 - total flux cleaned = -0.00383684 Jy ! Component: 650 - total flux cleaned = -0.00253208 Jy ! Component: 700 - total flux cleaned = -0.00124562 Jy ! Component: 750 - total flux cleaned = 0.000971978 Jy ! Component: 800 - total flux cleaned = 0.0028423 Jy ! Component: 850 - total flux cleaned = 0.00468372 Jy ! Component: 900 - total flux cleaned = 0.00620099 Jy ! Component: 950 - total flux cleaned = 0.00829744 Jy ! Component: 1000 - total flux cleaned = 0.00947956 Jy ! Component: 1050 - total flux cleaned = 0.0118146 Jy ! Component: 1100 - total flux cleaned = 0.0135473 Jy ! Component: 1150 - total flux cleaned = 0.0152621 Jy ! Component: 1200 - total flux cleaned = 0.0186562 Jy ! Component: 1250 - total flux cleaned = 0.0206147 Jy ! Component: 1300 - total flux cleaned = 0.0233875 Jy ! Component: 1350 - total flux cleaned = 0.026138 Jy ! Component: 1400 - total flux cleaned = 0.0285949 Jy ! Component: 1450 - total flux cleaned = 0.0310356 Jy ! Component: 1500 - total flux cleaned = 0.0331906 Jy ! Component: 1550 - total flux cleaned = 0.0353331 Jy ! Component: 1600 - total flux cleaned = 0.0382588 Jy ! Component: 1650 - total flux cleaned = 0.0401078 Jy ! Component: 1700 - total flux cleaned = 0.0427382 Jy ! Component: 1750 - total flux cleaned = 0.0448303 Jy ! Component: 1800 - total flux cleaned = 0.0471713 Jy ! Component: 1850 - total flux cleaned = 0.0489823 Jy ! Component: 1900 - total flux cleaned = 0.051299 Jy ! Component: 1950 - total flux cleaned = 0.0528363 Jy ! Component: 2000 - total flux cleaned = 0.0541125 Jy ! Total flux subtracted in 2048 components = 0.0548775 Jy ! Clean residual min=-0.016294 max=0.013313 Jy/beam ! Clean residual mean=0.000128 rms=0.006645 Jy/beam ! Combined flux in latest and established models = 0.31188 Jy keep ! Adding 163 model components to the UV plane model. ! The established model now contains 198 components and 0.31188 Jy ![Exited script file: muppet] wmap "J2256-2735_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.431 x 7.716 at -16.97 degrees (North through East) ! Clean map min=-0.034144 max=0.17963 Jy/beam ! Writing clean map to FITS file: J2256-2735_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.179626 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00669187 device "J2256-2735_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2256-2735_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -11.1764 11.1764 22.3527 44.7054 89.4109 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.02 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.179 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.431 x 7.716 at -16.97 degrees (North through East) ! Clean map min=-0.034144 max=0.17963 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2256-2735_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2256-2735_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2256-2735_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 20:18:34 2007