! Started logfile: J2247-1237_S_1997_05_07_yyk_uvs.log on Sun Jan 7 20:15:58 2007 obs J2247-1237_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J2247-1237_S_1997_05_07_yyk_uva.fits ! AN table 1: 130 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.960684 visibilities/baseline/integration-bin. ! Found source: J2247-1237 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 22480 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2247-1237_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.359188 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.786 mas, bmaj=6.978 mas, bpa=-2.447 degrees ! Estimated noise=1545.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0895337 Jy ! Component: 100 - total flux cleaned = 0.0970867 Jy ! Total flux subtracted in 100 components = 0.0970867 Jy ! Clean residual min=-0.010379 max=0.012679 Jy/beam ! Clean residual mean=0.000225 rms=0.002864 Jy/beam ! Combined flux in latest and established models = 0.0970868 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0970868 Jy ! ! Correcting IF 1. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.344081Jy sigma=0.001366 ! Fit after self-cal, rms=0.343908Jy sigma=0.001365 ! Inverting map and beam ! Estimated beam: bmin=2.786 mas, bmaj=6.978 mas, bpa=-2.447 degrees ! Estimated noise=1545.94 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.494 mas, bmaj=8.833 mas, bpa=-5.45 degrees ! Estimated noise=1077.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00601386 Jy ! Component: 100 - total flux cleaned = 0.00660357 Jy ! Component: 150 - total flux cleaned = 0.00699085 Jy ! Component: 200 - total flux cleaned = 0.00721684 Jy ! Total flux subtracted in 200 components = 0.00721684 Jy ! Clean residual min=-0.008287 max=0.016056 Jy/beam ! Clean residual mean=0.000330 rms=0.002924 Jy/beam ! Combined flux in latest and established models = 0.104304 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 20 components and 0.104304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343748Jy sigma=0.001365 ! Fit after self-cal, rms=0.343748Jy sigma=0.001365 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.494 x 8.833 at -5.45 degrees (North through East) ! Clean map min=-0.0081253 max=0.098512 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.343748Jy sigma=0.001365 ! Fit after self-cal, rms=0.343633Jy sigma=0.001365 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343633Jy sigma=0.001365 ! Fit after self-cal, rms=0.343634Jy sigma=0.001365 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=8.838 mas, bpa=-5.459 degrees ! Estimated noise=1077.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-17.5, 8.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170677 Jy ! Component: 100 - total flux cleaned = 0.0249779 Jy ! Component: 150 - total flux cleaned = 0.0299743 Jy ! Component: 200 - total flux cleaned = 0.0324708 Jy ! Total flux subtracted in 200 components = 0.0324708 Jy ! Clean residual min=-0.006091 max=0.008595 Jy/beam ! Clean residual mean=0.000204 rms=0.001965 Jy/beam ! Combined flux in latest and established models = 0.136774 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 50 components and 0.136774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343000Jy sigma=0.001361 ! Fit after self-cal, rms=0.342950Jy sigma=0.001361 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342950Jy sigma=0.001361 ! Fit after self-cal, rms=0.341986Jy sigma=0.001357 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, -1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0083593 Jy ! Component: 100 - total flux cleaned = 0.0117616 Jy ! Component: 150 - total flux cleaned = 0.0135587 Jy ! Component: 200 - total flux cleaned = 0.0142422 Jy ! Total flux subtracted in 200 components = 0.0142422 Jy ! Clean residual min=-0.005366 max=0.006275 Jy/beam ! Clean residual mean=0.000157 rms=0.001632 Jy/beam ! Combined flux in latest and established models = 0.151017 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 78 components and 0.151017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341737Jy sigma=0.001356 ! Fit after self-cal, rms=0.341508Jy sigma=0.001355 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.5 x 8.838 at -5.459 degrees (North through East) ! Clean map min=-0.0053495 max=0.10009 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341508Jy sigma=0.001355 ! Fit after self-cal, rms=0.341508Jy sigma=0.001355 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341508Jy sigma=0.001355 ! Fit after self-cal, rms=0.341505Jy sigma=0.001355 ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=8.838 mas, bpa=-5.459 degrees ! Estimated noise=1077.89 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00303167 Jy ! Component: 100 - total flux cleaned = 0.00366474 Jy ! Component: 150 - total flux cleaned = 0.00376898 Jy ! Component: 200 - total flux cleaned = 0.00348989 Jy ! Total flux subtracted in 200 components = 0.00348989 Jy ! Clean residual min=-0.005272 max=0.005935 Jy/beam ! Clean residual mean=0.000149 rms=0.001548 Jy/beam ! Combined flux in latest and established models = 0.154506 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 105 components and 0.154506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341433Jy sigma=0.001355 ! Fit after self-cal, rms=0.341436Jy sigma=0.001355 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341436Jy sigma=0.001355 ! Fit after self-cal, rms=0.341436Jy sigma=0.001355 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341436Jy sigma=0.001355 ! Fit after self-cal, rms=0.341438Jy sigma=0.001355 ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=8.838 mas, bpa=-5.459 degrees ! Estimated noise=1077.89 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107206 Jy ! Component: 100 - total flux cleaned = 0.000987475 Jy ! Component: 150 - total flux cleaned = 0.000904628 Jy ! Component: 200 - total flux cleaned = 0.000827532 Jy ! Total flux subtracted in 200 components = 0.000827532 Jy ! Clean residual min=-0.005797 max=0.005740 Jy/beam ! Clean residual mean=0.000146 rms=0.001535 Jy/beam ! Combined flux in latest and established models = 0.155334 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 121 components and 0.155334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341396Jy sigma=0.001355 ! Fit after self-cal, rms=0.341323Jy sigma=0.001355 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.978 mas, bmaj=15.12 mas, bpa=0.948 degrees ! Estimated noise=1334.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118422 Jy ! Component: 100 - total flux cleaned = 0.00146228 Jy ! Component: 150 - total flux cleaned = 0.00160331 Jy ! Component: 200 - total flux cleaned = 0.00164289 Jy ! Total flux subtracted in 200 components = 0.00164289 Jy ! Clean residual min=-0.005993 max=0.006292 Jy/beam ! Clean residual mean=0.000250 rms=0.001874 Jy/beam ! Combined flux in latest and established models = 0.156977 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 136 components and 0.156977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341319Jy sigma=0.001355 ! Fit after self-cal, rms=0.341260Jy sigma=0.001355 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.786 mas, bmaj=6.978 mas, bpa=-2.447 degrees ! Estimated noise=1547.49 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0928654 Jy ! Component: 100 - total flux cleaned = 0.115282 Jy ! Component: 150 - total flux cleaned = 0.126688 Jy ! Component: 200 - total flux cleaned = 0.134847 Jy ! Total flux subtracted in 200 components = 0.134847 Jy ! Clean residual min=-0.011281 max=0.009619 Jy/beam ! Clean residual mean=0.000143 rms=0.002481 Jy/beam ! Combined flux in latest and established models = 0.134847 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.134847 Jy ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=8.838 mas, bpa=-5.459 degrees ! Estimated noise=1077.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00948359 Jy ! Component: 100 - total flux cleaned = 0.0133737 Jy ! Component: 150 - total flux cleaned = 0.0156901 Jy ! Component: 200 - total flux cleaned = 0.0169824 Jy ! Total flux subtracted in 200 components = 0.0169824 Jy ! Clean residual min=-0.006313 max=0.005618 Jy/beam ! Clean residual mean=0.000158 rms=0.001629 Jy/beam ! Combined flux in latest and established models = 0.151829 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 50 components and 0.151829 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.978 mas, bmaj=15.12 mas, bpa=0.948 degrees ! Estimated noise=1334.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295578 Jy ! Component: 100 - total flux cleaned = 0.0038935 Jy ! Component: 150 - total flux cleaned = 0.00444082 Jy ! Component: 200 - total flux cleaned = 0.00496293 Jy ! Total flux subtracted in 200 components = 0.00496293 Jy ! Clean residual min=-0.006107 max=0.006543 Jy/beam ! Clean residual mean=0.000249 rms=0.001899 Jy/beam ! Combined flux in latest and established models = 0.156792 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 78 components and 0.156792 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=8.838 mas, bpa=-5.459 degrees ! Estimated noise=1077.89 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00014595 Jy ! Component: 100 - total flux cleaned = -0.00014005 Jy ! Component: 150 - total flux cleaned = -0.00032465 Jy ! Component: 200 - total flux cleaned = -0.000408571 Jy ! Total flux subtracted in 200 components = -0.000408571 Jy ! Clean residual min=-0.005836 max=0.006061 Jy/beam ! Clean residual mean=0.000138 rms=0.001546 Jy/beam ! Combined flux in latest and established models = 0.156384 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 96 components and 0.156384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.341292Jy sigma=0.001355 ! Fit after self-cal, rms=0.341261Jy sigma=0.001355 wmodel J2247-1237_S_1997_05_07_yyk\_map.mod ! Writing 96 model components to file: J2247-1237_S_1997_05_07_yyk_map.mod wobs J2247-1237_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J2247-1237_S_1997_05_07_yyk_uvs.fits wwins J2247-1237_S_1997_05_07_yyk\_map.win ! wwins: Wrote 3 windows to J2247-1237_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.13272e-06 Jy ! Component: 100 - total flux cleaned = 0.00105482 Jy ! Component: 150 - total flux cleaned = 0.00184982 Jy ! Component: 200 - total flux cleaned = 0.00252179 Jy ! Component: 250 - total flux cleaned = 0.00324351 Jy ! Component: 300 - total flux cleaned = 0.00393323 Jy ! Component: 350 - total flux cleaned = 0.00474937 Jy ! Component: 400 - total flux cleaned = 0.00525219 Jy ! Component: 450 - total flux cleaned = 0.00595272 Jy ! Component: 500 - total flux cleaned = 0.0066376 Jy ! Component: 550 - total flux cleaned = 0.00737508 Jy ! Component: 600 - total flux cleaned = 0.00816234 Jy ! Component: 650 - total flux cleaned = 0.00886814 Jy ! Component: 700 - total flux cleaned = 0.00937186 Jy ! Component: 750 - total flux cleaned = 0.00999065 Jy ! Component: 800 - total flux cleaned = 0.0105363 Jy ! Component: 850 - total flux cleaned = 0.0109533 Jy ! Component: 900 - total flux cleaned = 0.0115375 Jy ! Component: 950 - total flux cleaned = 0.0119965 Jy ! Component: 1000 - total flux cleaned = 0.01256 Jy ! Component: 1050 - total flux cleaned = 0.0128372 Jy ! Component: 1100 - total flux cleaned = 0.0132199 Jy ! Component: 1150 - total flux cleaned = 0.0136492 Jy ! Component: 1200 - total flux cleaned = 0.0139659 Jy ! Component: 1250 - total flux cleaned = 0.0143306 Jy ! Component: 1300 - total flux cleaned = 0.0147919 Jy ! Component: 1350 - total flux cleaned = 0.0151955 Jy ! Component: 1400 - total flux cleaned = 0.0155438 Jy ! Component: 1450 - total flux cleaned = 0.0160335 Jy ! Component: 1500 - total flux cleaned = 0.0167083 Jy ! Component: 1550 - total flux cleaned = 0.0170413 Jy ! Component: 1600 - total flux cleaned = 0.0176521 Jy ! Component: 1650 - total flux cleaned = 0.0182987 Jy ! Component: 1700 - total flux cleaned = 0.0186642 Jy ! Component: 1750 - total flux cleaned = 0.0192057 Jy ! Component: 1800 - total flux cleaned = 0.0197837 Jy ! Component: 1850 - total flux cleaned = 0.0202663 Jy ! Component: 1900 - total flux cleaned = 0.0206565 Jy ! Component: 1950 - total flux cleaned = 0.0210429 Jy ! Component: 2000 - total flux cleaned = 0.0215089 Jy ! Total flux subtracted in 2048 components = 0.0219704 Jy ! Clean residual min=-0.002882 max=0.002555 Jy/beam ! Clean residual mean=0.000081 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.178354 Jy keep ! Adding 119 model components to the UV plane model. ! The established model now contains 215 components and 0.178354 Jy ![Exited script file: muppet] wmap "J2247-1237_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.5 x 8.838 at -5.459 degrees (North through East) ! Clean map min=-0.005014 max=0.10065 Jy/beam ! Writing clean map to FITS file: J2247-1237_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.100646 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000872767 device "J2247-1237_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J2247-1237_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.60149 2.60149 5.20298 10.406 20.8119 41.6239 83.2477 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.1 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.5 x 8.838 at -5.459 degrees (North through East) ! Clean map min=-0.005014 max=0.10065 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2247-1237_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J2247-1237_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2247-1237_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 20:16:05 2007