! Started logfile: J2236-1433_S_1997_05_07_yyk_uvs.log on Sun Jan 7 20:12:29 2007 obs J2236-1433_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J2236-1433_S_1997_05_07_yyk_uva.fits ! AN table 1: 140 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.95873 visibilities/baseline/integration-bin. ! Found source: J2236-1433 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 24160 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2236-1433_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.449035 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.754 mas, bmaj=7.005 mas, bpa=-4.449 degrees ! Estimated noise=2194.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.255723 Jy ! Component: 100 - total flux cleaned = 0.319391 Jy ! Total flux subtracted in 100 components = 0.319391 Jy ! Clean residual min=-0.023733 max=0.035564 Jy/beam ! Clean residual mean=0.000715 rms=0.007089 Jy/beam ! Combined flux in latest and established models = 0.319391 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.319391 Jy ! ! Correcting IF 1. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.315213Jy sigma=0.001257 ! Fit after self-cal, rms=0.313755Jy sigma=0.001252 ! Inverting map and beam ! Estimated beam: bmin=2.754 mas, bmaj=7.005 mas, bpa=-4.449 degrees ! Estimated noise=2194.89 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.481 mas, bmaj=8.827 mas, bpa=-5.428 degrees ! Estimated noise=1059.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, -1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0640201 Jy ! Component: 100 - total flux cleaned = 0.0932778 Jy ! Component: 150 - total flux cleaned = 0.109351 Jy ! Component: 200 - total flux cleaned = 0.116559 Jy ! Total flux subtracted in 200 components = 0.116559 Jy ! Clean residual min=-0.010314 max=0.019767 Jy/beam ! Clean residual mean=0.000599 rms=0.004096 Jy/beam ! Combined flux in latest and established models = 0.43595 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 73 model components to the UV plane model. ! The established model now contains 82 components and 0.43595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.304603Jy sigma=0.001207 ! Fit after self-cal, rms=0.303968Jy sigma=0.001204 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.481 x 8.827 at -5.428 degrees (North through East) ! Clean map min=-0.0094895 max=0.28946 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03461 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.04 HN 1.02 KP 0.89 ! LA 0.96 MK 0.98 NL 1.00* OV 1.10 ! PT 0.92 SC 0.82 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.980202 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.14 HN 1.11 KP 0.99 ! LA 1.06 MK 1.03 NL 1.00 OV 1.05 ! PT 0.90 SC 0.92 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.04094 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.05 HN 1.01 KP 0.91 ! LA 0.79 MK 0.89 NL 0.94 OV 0.97 ! PT 1.03 SC 1.09 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.99434 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.13 HN 1.07 KP 0.96 ! LA 0.86 MK 0.99 NL 1.06 OV 1.08 ! PT 0.90 SC 1.03 ! ! ! Fit before self-cal, rms=0.303968Jy sigma=0.001204 ! Fit after self-cal, rms=0.296954Jy sigma=0.001194 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296954Jy sigma=0.001194 ! Fit after self-cal, rms=0.296955Jy sigma=0.001194 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.478 mas, bmaj=8.667 mas, bpa=-4.908 degrees ! Estimated noise=1062.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104595 Jy ! Component: 100 - total flux cleaned = 0.0109334 Jy ! Component: 150 - total flux cleaned = 0.0109269 Jy ! Component: 200 - total flux cleaned = 0.0112734 Jy ! Total flux subtracted in 200 components = 0.0112734 Jy ! Clean residual min=-0.006510 max=0.006639 Jy/beam ! Clean residual mean=0.000223 rms=0.002003 Jy/beam ! Combined flux in latest and established models = 0.447224 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 106 components and 0.447224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296539Jy sigma=0.001192 ! Fit after self-cal, rms=0.296496Jy sigma=0.001192 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296496Jy sigma=0.001192 ! Fit after self-cal, rms=0.295595Jy sigma=0.001188 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255435 Jy ! Component: 100 - total flux cleaned = 0.00255558 Jy ! Component: 150 - total flux cleaned = 0.0024224 Jy ! Component: 200 - total flux cleaned = 0.0024172 Jy ! Total flux subtracted in 200 components = 0.0024172 Jy ! Clean residual min=-0.006090 max=0.006505 Jy/beam ! Clean residual mean=0.000210 rms=0.001920 Jy/beam ! Combined flux in latest and established models = 0.449641 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 116 components and 0.449641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295448Jy sigma=0.001187 ! Fit after self-cal, rms=0.295322Jy sigma=0.001187 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.478 x 8.667 at -4.908 degrees (North through East) ! Clean map min=-0.0057241 max=0.28843 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295322Jy sigma=0.001187 ! Fit after self-cal, rms=0.289989Jy sigma=0.001184 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289989Jy sigma=0.001184 ! Fit after self-cal, rms=0.289967Jy sigma=0.001184 ! Inverting map and beam ! Estimated beam: bmin=3.446 mas, bmaj=8.69 mas, bpa=-4.899 degrees ! Estimated noise=1051.62 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108378 Jy ! Component: 100 - total flux cleaned = 0.00109307 Jy ! Component: 150 - total flux cleaned = 0.000871838 Jy ! Component: 200 - total flux cleaned = 0.000674228 Jy ! Total flux subtracted in 200 components = 0.000674228 Jy ! Clean residual min=-0.005556 max=0.006232 Jy/beam ! Clean residual mean=0.000199 rms=0.001715 Jy/beam ! Combined flux in latest and established models = 0.450315 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 133 components and 0.450315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289873Jy sigma=0.001183 ! Fit after self-cal, rms=0.289856Jy sigma=0.001183 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289856Jy sigma=0.001183 ! Fit after self-cal, rms=0.289759Jy sigma=0.001182 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289759Jy sigma=0.001182 ! Fit after self-cal, rms=0.289758Jy sigma=0.001182 ! Inverting map and beam ! Estimated beam: bmin=3.444 mas, bmaj=8.675 mas, bpa=-4.71 degrees ! Estimated noise=1051.46 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104534 Jy ! Component: 100 - total flux cleaned = 0.000954171 Jy ! Component: 150 - total flux cleaned = 0.000958628 Jy ! Component: 200 - total flux cleaned = 0.000961005 Jy ! Total flux subtracted in 200 components = 0.000961005 Jy ! Clean residual min=-0.005516 max=0.006083 Jy/beam ! Clean residual mean=0.000202 rms=0.001683 Jy/beam ! Combined flux in latest and established models = 0.451276 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 142 components and 0.451276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289706Jy sigma=0.001181 ! Fit after self-cal, rms=0.289699Jy sigma=0.001181 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.113 mas, bmaj=15.52 mas, bpa=2.18 degrees ! Estimated noise=1314.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000555166 Jy ! Component: 100 - total flux cleaned = 0.0004565 Jy ! Component: 150 - total flux cleaned = 0.000458069 Jy ! Component: 200 - total flux cleaned = 0.000457239 Jy ! Total flux subtracted in 200 components = 0.000457239 Jy ! Clean residual min=-0.005799 max=0.009703 Jy/beam ! Clean residual mean=0.000374 rms=0.002542 Jy/beam ! Combined flux in latest and established models = 0.451733 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 153 components and 0.451733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289692Jy sigma=0.001181 ! Fit after self-cal, rms=0.289687Jy sigma=0.001181 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.736 mas, bmaj=6.952 mas, bpa=-4.266 degrees ! Estimated noise=2181.95 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.258927 Jy ! Component: 100 - total flux cleaned = 0.33235 Jy ! Component: 150 - total flux cleaned = 0.373125 Jy ! Component: 200 - total flux cleaned = 0.399472 Jy ! Total flux subtracted in 200 components = 0.399472 Jy ! Clean residual min=-0.013569 max=0.012705 Jy/beam ! Clean residual mean=0.000260 rms=0.003766 Jy/beam ! Combined flux in latest and established models = 0.399472 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.399472 Jy ! Inverting map and beam ! Estimated beam: bmin=3.444 mas, bmaj=8.675 mas, bpa=-4.71 degrees ! Estimated noise=1051.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0255439 Jy ! Component: 100 - total flux cleaned = 0.0378089 Jy ! Component: 150 - total flux cleaned = 0.0429325 Jy ! Component: 200 - total flux cleaned = 0.0440646 Jy ! Total flux subtracted in 200 components = 0.0440646 Jy ! Clean residual min=-0.006154 max=0.006670 Jy/beam ! Clean residual mean=0.000245 rms=0.001879 Jy/beam ! Combined flux in latest and established models = 0.443536 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 85 components and 0.443536 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.113 mas, bmaj=15.52 mas, bpa=2.18 degrees ! Estimated noise=1314.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00575303 Jy ! Component: 100 - total flux cleaned = 0.00628329 Jy ! Component: 150 - total flux cleaned = 0.00638605 Jy ! Component: 200 - total flux cleaned = 0.00657618 Jy ! Total flux subtracted in 200 components = 0.00657618 Jy ! Clean residual min=-0.005999 max=0.009961 Jy/beam ! Clean residual mean=0.000398 rms=0.002688 Jy/beam ! Combined flux in latest and established models = 0.450113 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 100 components and 0.450113 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.444 mas, bmaj=8.675 mas, bpa=-4.71 degrees ! Estimated noise=1051.46 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000801208 Jy ! Component: 100 - total flux cleaned = -0.000791946 Jy ! Component: 150 - total flux cleaned = -0.000573299 Jy ! Component: 200 - total flux cleaned = -0.000570988 Jy ! Total flux subtracted in 200 components = -0.000570988 Jy ! Clean residual min=-0.005893 max=0.006271 Jy/beam ! Clean residual mean=0.000210 rms=0.001726 Jy/beam ! Combined flux in latest and established models = 0.449542 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 120 components and 0.449542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289742Jy sigma=0.001181 ! Fit after self-cal, rms=0.289716Jy sigma=0.001181 wmodel J2236-1433_S_1997_05_07_yyk\_map.mod ! Writing 120 model components to file: J2236-1433_S_1997_05_07_yyk_map.mod wobs J2236-1433_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J2236-1433_S_1997_05_07_yyk_uvs.fits wwins J2236-1433_S_1997_05_07_yyk\_map.win ! wwins: Wrote 2 windows to J2236-1433_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000897625 Jy ! Component: 100 - total flux cleaned = 0.00146544 Jy ! Component: 150 - total flux cleaned = 0.0021591 Jy ! Component: 200 - total flux cleaned = 0.00281322 Jy ! Component: 250 - total flux cleaned = 0.0036624 Jy ! Component: 300 - total flux cleaned = 0.004467 Jy ! Component: 350 - total flux cleaned = 0.00517102 Jy ! Component: 400 - total flux cleaned = 0.00571386 Jy ! Component: 450 - total flux cleaned = 0.00610566 Jy ! Component: 500 - total flux cleaned = 0.00654539 Jy ! Component: 550 - total flux cleaned = 0.00715615 Jy ! Component: 600 - total flux cleaned = 0.0076914 Jy ! Component: 650 - total flux cleaned = 0.00838495 Jy ! Component: 700 - total flux cleaned = 0.00900433 Jy ! Component: 750 - total flux cleaned = 0.00966487 Jy ! Component: 800 - total flux cleaned = 0.0104156 Jy ! Component: 850 - total flux cleaned = 0.010939 Jy ! Component: 900 - total flux cleaned = 0.0115528 Jy ! Component: 950 - total flux cleaned = 0.0118537 Jy ! Component: 1000 - total flux cleaned = 0.0122472 Jy ! Component: 1050 - total flux cleaned = 0.0125843 Jy ! Component: 1100 - total flux cleaned = 0.0130085 Jy ! Component: 1150 - total flux cleaned = 0.0132851 Jy ! Component: 1200 - total flux cleaned = 0.0137387 Jy ! Component: 1250 - total flux cleaned = 0.0142269 Jy ! Component: 1300 - total flux cleaned = 0.014489 Jy ! Component: 1350 - total flux cleaned = 0.0148325 Jy ! Component: 1400 - total flux cleaned = 0.0151279 Jy ! Component: 1450 - total flux cleaned = 0.0155435 Jy ! Component: 1500 - total flux cleaned = 0.015912 Jy ! Component: 1550 - total flux cleaned = 0.0162342 Jy ! Component: 1600 - total flux cleaned = 0.0165907 Jy ! Component: 1650 - total flux cleaned = 0.0169418 Jy ! Component: 1700 - total flux cleaned = 0.0170953 Jy ! Component: 1750 - total flux cleaned = 0.0173227 Jy ! Component: 1800 - total flux cleaned = 0.0175465 Jy ! Component: 1850 - total flux cleaned = 0.0178034 Jy ! Component: 1900 - total flux cleaned = 0.0179122 Jy ! Component: 1950 - total flux cleaned = 0.018127 Jy ! Component: 2000 - total flux cleaned = 0.0182333 Jy ! Total flux subtracted in 2048 components = 0.0184772 Jy ! Clean residual min=-0.002897 max=0.002611 Jy/beam ! Clean residual mean=0.000070 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.468019 Jy keep ! Adding 136 model components to the UV plane model. ! The established model now contains 256 components and 0.468019 Jy ![Exited script file: muppet] wmap "J2236-1433_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.444 x 8.675 at -4.71 degrees (North through East) ! Clean map min=-0.0036775 max=0.29132 Jy/beam ! Writing clean map to FITS file: J2236-1433_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.29132 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000707128 device "J2236-1433_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J2236-1433_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.728196 0.728196 1.45639 2.91279 5.82557 11.6511 23.3023 46.6046 93.2091 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.291 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.444 x 8.675 at -4.71 degrees (North through East) ! Clean map min=-0.0036775 max=0.29132 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2236-1433_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J2236-1433_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2236-1433_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 20:12:37 2007