! Started logfile: J2218-0335_S_1997_05_07_yyk_uvs.log on Sun Jan 7 20:10:04 2007 obs J2218-0335_S_1997_05_07_yyk_uva.fits ! Reading UV FITS file: J2218-0335_S_1997_05_07_yyk_uva.fits ! AN table 1: 136 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.954085 visibilities/baseline/integration-bin. ! Found source: J2218-0335 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 614 lines of history. ! ! Reading 23356 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2218-0335_S_1997_05_07_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.85422 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=7.253 mas, bpa=-2.494 degrees ! Estimated noise=1557.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.4118 Jy ! Component: 100 - total flux cleaned = 2.69866 Jy ! Total flux subtracted in 100 components = 2.69866 Jy ! Clean residual min=-0.094525 max=0.093015 Jy/beam ! Clean residual mean=0.000254 rms=0.021188 Jy/beam ! Combined flux in latest and established models = 2.69866 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 2.69866 Jy ! ! Correcting IF 1. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.499619Jy sigma=0.002104 ! Fit after self-cal, rms=0.498957Jy sigma=0.002100 ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=7.253 mas, bpa=-2.494 degrees ! Estimated noise=1558.06 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.503 mas, bmaj=8.684 mas, bpa=-5.514 degrees ! Estimated noise=988.137 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00744414 Jy ! Component: 100 - total flux cleaned = -0.00722778 Jy ! Component: 150 - total flux cleaned = -0.00576173 Jy ! Component: 200 - total flux cleaned = -0.00133214 Jy ! Total flux subtracted in 200 components = -0.00133214 Jy ! Clean residual min=-0.045530 max=0.069436 Jy/beam ! Clean residual mean=0.000983 rms=0.015785 Jy/beam ! Combined flux in latest and established models = 2.69733 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 21 components and 2.69733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.477007Jy sigma=0.002033 ! Fit after self-cal, rms=0.476994Jy sigma=0.002033 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.503 x 8.684 at -5.514 degrees (North through East) ! Clean map min=-0.045428 max=2.7181 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.0276 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.06 HN 1.00 KP 0.90 ! LA 0.99 MK 0.99 NL 1.00* OV 1.09 ! PT 0.94 SC 0.81 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.979969 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.13 HN 1.09 KP 1.01 ! LA 1.08 MK 1.04 NL 0.96 OV 1.02 ! PT 0.94 SC 0.91 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.05175 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.06 HN 0.96 KP 0.91 ! LA 0.80 MK 0.87 NL 0.93 OV 0.94 ! PT 1.07 SC 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.992754 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.11 HN 1.07 KP 0.95 ! LA 0.88 MK 1.03 NL 1.04 OV 1.09 ! PT 0.91 SC 1.00 ! ! ! Fit before self-cal, rms=0.476994Jy sigma=0.002033 ! Fit after self-cal, rms=0.362057Jy sigma=0.001602 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.362057Jy sigma=0.001602 ! Fit after self-cal, rms=0.362056Jy sigma=0.001602 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.467 mas, bmaj=8.478 mas, bpa=-4.422 degrees ! Estimated noise=996.525 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0448343 Jy ! Component: 100 - total flux cleaned = 0.0489477 Jy ! Component: 150 - total flux cleaned = 0.0489465 Jy ! Component: 200 - total flux cleaned = 0.0489649 Jy ! Total flux subtracted in 200 components = 0.0489649 Jy ! Clean residual min=-0.012714 max=0.016712 Jy/beam ! Clean residual mean=0.000012 rms=0.003581 Jy/beam ! Combined flux in latest and established models = 2.74629 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 43 components and 2.74629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.355898Jy sigma=0.001582 ! Fit after self-cal, rms=0.355893Jy sigma=0.001582 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.355893Jy sigma=0.001582 ! Fit after self-cal, rms=0.335059Jy sigma=0.001496 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -11.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178222 Jy ! Component: 100 - total flux cleaned = 0.0209359 Jy ! Component: 150 - total flux cleaned = 0.0209495 Jy ! Component: 200 - total flux cleaned = 0.0209583 Jy ! Total flux subtracted in 200 components = 0.0209583 Jy ! Clean residual min=-0.011721 max=0.012335 Jy/beam ! Clean residual mean=-0.000076 rms=0.003074 Jy/beam ! Combined flux in latest and established models = 2.76725 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 63 components and 2.76725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.334204Jy sigma=0.001492 ! Fit after self-cal, rms=0.330702Jy sigma=0.001478 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.467 x 8.478 at -4.422 degrees (North through East) ! Clean map min=-0.011905 max=2.7588 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330702Jy sigma=0.001478 ! Fit after self-cal, rms=0.285174Jy sigma=0.001275 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285174Jy sigma=0.001275 ! Fit after self-cal, rms=0.284433Jy sigma=0.001272 ! Inverting map and beam ! Estimated beam: bmin=3.462 mas, bmaj=8.458 mas, bpa=-4.313 degrees ! Estimated noise=994.367 mJy/beam. ! Added new window around map position (-3.5, -33.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126936 Jy ! Component: 100 - total flux cleaned = 0.0145762 Jy ! Component: 150 - total flux cleaned = 0.015327 Jy ! Component: 200 - total flux cleaned = 0.0157727 Jy ! Total flux subtracted in 200 components = 0.0157727 Jy ! Clean residual min=-0.008038 max=0.007445 Jy/beam ! Clean residual mean=-0.000058 rms=0.001941 Jy/beam ! Combined flux in latest and established models = 2.78302 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 91 components and 2.78302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283880Jy sigma=0.001269 ! Fit after self-cal, rms=0.283697Jy sigma=0.001268 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283697Jy sigma=0.001268 ! Fit after self-cal, rms=0.283194Jy sigma=0.001266 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283194Jy sigma=0.001266 ! Fit after self-cal, rms=0.283115Jy sigma=0.001266 ! Inverting map and beam ! Estimated beam: bmin=3.46 mas, bmaj=8.454 mas, bpa=-4.291 degrees ! Estimated noise=994.205 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181095 Jy ! Component: 100 - total flux cleaned = 0.00220989 Jy ! Component: 150 - total flux cleaned = 0.00238512 Jy ! Component: 200 - total flux cleaned = 0.00270759 Jy ! Total flux subtracted in 200 components = 0.00270759 Jy ! Clean residual min=-0.007176 max=0.007067 Jy/beam ! Clean residual mean=-0.000047 rms=0.001798 Jy/beam ! Combined flux in latest and established models = 2.78573 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 114 components and 2.78573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282916Jy sigma=0.001265 ! Fit after self-cal, rms=0.282858Jy sigma=0.001265 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.994 mas, bmaj=13.32 mas, bpa=0.5558 degrees ! Estimated noise=1239.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236268 Jy ! Component: 100 - total flux cleaned = 0.00217505 Jy ! Component: 150 - total flux cleaned = 0.00225217 Jy ! Component: 200 - total flux cleaned = 0.00260215 Jy ! Total flux subtracted in 200 components = 0.00260215 Jy ! Clean residual min=-0.006514 max=0.007285 Jy/beam ! Clean residual mean=-0.000096 rms=0.002166 Jy/beam ! Combined flux in latest and established models = 2.78833 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 141 components and 2.78833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282830Jy sigma=0.001264 ! Fit after self-cal, rms=0.282777Jy sigma=0.001264 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.777 mas, bmaj=7.175 mas, bpa=-1.761 degrees ! Estimated noise=1548.05 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.39837 Jy ! Component: 100 - total flux cleaned = 2.72904 Jy ! Component: 150 - total flux cleaned = 2.75897 Jy ! Component: 200 - total flux cleaned = 2.75871 Jy ! Total flux subtracted in 200 components = 2.75871 Jy ! Clean residual min=-0.021576 max=0.021860 Jy/beam ! Clean residual mean=-0.000033 rms=0.004550 Jy/beam ! Combined flux in latest and established models = 2.75871 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 2.75871 Jy ! Inverting map and beam ! Estimated beam: bmin=3.46 mas, bmaj=8.454 mas, bpa=-4.291 degrees ! Estimated noise=994.205 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00894705 Jy ! Component: 100 - total flux cleaned = 0.0126402 Jy ! Component: 150 - total flux cleaned = 0.0162612 Jy ! Component: 200 - total flux cleaned = 0.0188131 Jy ! Total flux subtracted in 200 components = 0.0188131 Jy ! Clean residual min=-0.009490 max=0.008107 Jy/beam ! Clean residual mean=-0.000037 rms=0.002449 Jy/beam ! Combined flux in latest and established models = 2.77752 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 37 components and 2.77752 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.994 mas, bmaj=13.32 mas, bpa=0.5558 degrees ! Estimated noise=1239.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00785963 Jy ! Component: 100 - total flux cleaned = 0.00784076 Jy ! Component: 150 - total flux cleaned = 0.00823106 Jy ! Component: 200 - total flux cleaned = 0.00873736 Jy ! Total flux subtracted in 200 components = 0.00873736 Jy ! Clean residual min=-0.006760 max=0.007115 Jy/beam ! Clean residual mean=-0.000086 rms=0.002233 Jy/beam ! Combined flux in latest and established models = 2.78626 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 87 components and 2.78626 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.46 mas, bmaj=8.454 mas, bpa=-4.291 degrees ! Estimated noise=994.205 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00178172 Jy ! Component: 100 - total flux cleaned = -0.00213318 Jy ! Component: 150 - total flux cleaned = -0.00212431 Jy ! Component: 200 - total flux cleaned = -0.0018374 Jy ! Total flux subtracted in 200 components = -0.0018374 Jy ! Clean residual min=-0.007223 max=0.007174 Jy/beam ! Clean residual mean=-0.000044 rms=0.001995 Jy/beam ! Combined flux in latest and established models = 2.78442 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 97 components and 2.78442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283347Jy sigma=0.001266 ! Fit after self-cal, rms=0.283287Jy sigma=0.001266 wmodel J2218-0335_S_1997_05_07_yyk\_map.mod ! Writing 97 model components to file: J2218-0335_S_1997_05_07_yyk_map.mod wobs J2218-0335_S_1997_05_07_yyk\_uvs.fits ! Writing UV FITS file: J2218-0335_S_1997_05_07_yyk_uvs.fits wwins J2218-0335_S_1997_05_07_yyk\_map.win ! wwins: Wrote 3 windows to J2218-0335_S_1997_05_07_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000765398 Jy ! Component: 100 - total flux cleaned = -0.00173871 Jy ! Component: 150 - total flux cleaned = -0.00150951 Jy ! Component: 200 - total flux cleaned = -0.00150747 Jy ! Component: 250 - total flux cleaned = -0.00078153 Jy ! Component: 300 - total flux cleaned = -0.000182056 Jy ! Component: 350 - total flux cleaned = 0.000399197 Jy ! Component: 400 - total flux cleaned = 0.000962393 Jy ! Component: 450 - total flux cleaned = 0.00123785 Jy ! Component: 500 - total flux cleaned = 0.0018643 Jy ! Component: 550 - total flux cleaned = 0.00212582 Jy ! Component: 600 - total flux cleaned = 0.00263672 Jy ! Component: 650 - total flux cleaned = 0.00288391 Jy ! Component: 700 - total flux cleaned = 0.0032897 Jy ! Component: 750 - total flux cleaned = 0.00336617 Jy ! Component: 800 - total flux cleaned = 0.00297814 Jy ! Component: 850 - total flux cleaned = 0.0032816 Jy ! Component: 900 - total flux cleaned = 0.00320369 Jy ! Component: 950 - total flux cleaned = 0.00334911 Jy ! Component: 1000 - total flux cleaned = 0.00313131 Jy ! Component: 1050 - total flux cleaned = 0.00292028 Jy ! Component: 1100 - total flux cleaned = 0.00292205 Jy ! Component: 1150 - total flux cleaned = 0.00305972 Jy ! Component: 1200 - total flux cleaned = 0.00326053 Jy ! Component: 1250 - total flux cleaned = 0.0027292 Jy ! Component: 1300 - total flux cleaned = 0.0028617 Jy ! Component: 1350 - total flux cleaned = 0.00286149 Jy ! Component: 1400 - total flux cleaned = 0.00286073 Jy ! Component: 1450 - total flux cleaned = 0.0024863 Jy ! Component: 1500 - total flux cleaned = 0.00261059 Jy ! Component: 1550 - total flux cleaned = 0.00267011 Jy ! Component: 1600 - total flux cleaned = 0.00219287 Jy ! Component: 1650 - total flux cleaned = 0.00230954 Jy ! Component: 1700 - total flux cleaned = 0.00196301 Jy ! Component: 1750 - total flux cleaned = 0.00184929 Jy ! Component: 1800 - total flux cleaned = 0.00179281 Jy ! Component: 1850 - total flux cleaned = 0.00173724 Jy ! Component: 1900 - total flux cleaned = 0.00162699 Jy ! Component: 1950 - total flux cleaned = 0.00157199 Jy ! Component: 2000 - total flux cleaned = 0.00130532 Jy ! Total flux subtracted in 2048 components = 0.00119985 Jy ! Clean residual min=-0.002709 max=0.003267 Jy/beam ! Clean residual mean=-0.000011 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 2.78562 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 233 components and 2.78563 Jy ![Exited script file: muppet] wmap "J2218-0335_S_1997_05_07_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.46 x 8.454 at -4.291 degrees (North through East) ! Clean map min=-0.005263 max=2.7557 Jy/beam ! Writing clean map to FITS file: J2218-0335_S_1997_05_07_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.7557 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00108327 device "J2218-0335_S_1997_05_07_yyk\_map.eps/VPS" ! Attempting to open device: 'J2218-0335_S_1997_05_07_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.11793 0.11793 0.235861 0.471722 0.943444 1.88689 3.77378 7.54755 15.0951 30.1902 60.3804 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0032 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.755 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.46 x 8.454 at -4.291 degrees (North through East) ! Clean map min=-0.005263 max=2.7557 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2218-0335_S_1997_05_07_yyk\_map.gif/gif" ! Attempting to open device: 'J2218-0335_S_1997_05_07_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2218-0335_S_1997_05_07_yyk_uvs.log closed on Sun Jan 7 20:10:11 2007