! Started logfile: J2213-2529_S_1997_08_27_yyk_uvs.log on Sun Jan 7 20:09:08 2007 obs J2213-2529_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J2213-2529_S_1997_08_27_yyk_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.625594 visibilities/baseline/integration-bin. ! Found source: J2213-2529 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 16328 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2213-2529_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.843844 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.771 mas, bmaj=6.151 mas, bpa=-21.08 degrees ! Estimated noise=3960.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.500019 Jy ! Component: 100 - total flux cleaned = 0.602983 Jy ! Total flux subtracted in 100 components = 0.602983 Jy ! Clean residual min=-0.091917 max=0.103472 Jy/beam ! Clean residual mean=-0.003635 rms=0.022194 Jy/beam ! Combined flux in latest and established models = 0.602983 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.602983 Jy ! ! Correcting IF 1. ! A total of 464 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 320 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 320 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 320 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.511704Jy sigma=0.001529 ! Fit after self-cal, rms=0.507888Jy sigma=0.001517 ! Inverting map and beam ! Estimated beam: bmin=2.771 mas, bmaj=6.151 mas, bpa=-21.08 degrees ! Estimated noise=3960.49 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=7.69 mas, bpa=-15.08 degrees ! Estimated noise=1745.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.155139 Jy ! Component: 100 - total flux cleaned = 0.218682 Jy ! Component: 150 - total flux cleaned = 0.228999 Jy ! Component: 200 - total flux cleaned = 0.23369 Jy ! Total flux subtracted in 200 components = 0.23369 Jy ! Clean residual min=-0.048918 max=0.080450 Jy/beam ! Clean residual mean=-0.002129 rms=0.013576 Jy/beam ! Combined flux in latest and established models = 0.836673 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 33 components and 0.836673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.474518Jy sigma=0.001399 ! Fit after self-cal, rms=0.474048Jy sigma=0.001397 ! Inverting map ! Added new window around map position (6, 3.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0547083 Jy ! Component: 100 - total flux cleaned = 0.059525 Jy ! Component: 150 - total flux cleaned = 0.0595007 Jy ! Component: 200 - total flux cleaned = 0.0584117 Jy ! Total flux subtracted in 200 components = 0.0584117 Jy ! Clean residual min=-0.039204 max=0.038304 Jy/beam ! Clean residual mean=-0.002546 rms=0.010661 Jy/beam ! Combined flux in latest and established models = 0.895085 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 54 components and 0.895085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.462071Jy sigma=0.001361 ! Fit after self-cal, rms=0.460995Jy sigma=0.001357 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.347 x 7.69 at -15.08 degrees (North through East) ! Clean map min=-0.040189 max=0.63 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02501 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.05 HN 0.81 KP 0.92 ! LA 0.97 MK 1.01 NL 1.00* OV 1.18 ! PT 1.03 SC 0.85 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.985385 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.10 HN 0.93 KP 0.93 ! LA 1.06 MK 1.07 NL 0.99 OV 1.08 ! PT 1.03 SC 0.92 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.03836 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 0.87 KP 0.90 ! LA 0.80 MK 0.90 NL 0.98 OV 1.00 ! PT 1.22 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.987975 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.07 HN 1.04 KP 0.94 ! LA 0.88 MK 1.10 NL 1.08 OV 0.99 ! PT 1.04 SC 1.00 ! ! ! Fit before self-cal, rms=0.460995Jy sigma=0.001357 ! Fit after self-cal, rms=0.439270Jy sigma=0.001330 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.439270Jy sigma=0.001330 ! Fit after self-cal, rms=0.439211Jy sigma=0.001330 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=7.642 mas, bpa=-13.75 degrees ! Estimated noise=1729.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0308268 Jy ! Component: 100 - total flux cleaned = 0.0315355 Jy ! Component: 150 - total flux cleaned = 0.0302419 Jy ! Component: 200 - total flux cleaned = 0.0296387 Jy ! Total flux subtracted in 200 components = 0.0296387 Jy ! Clean residual min=-0.034356 max=0.022695 Jy/beam ! Clean residual mean=-0.001042 rms=0.007937 Jy/beam ! Combined flux in latest and established models = 0.924723 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 71 components and 0.924723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.436825Jy sigma=0.001321 ! Fit after self-cal, rms=0.436623Jy sigma=0.001320 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.436623Jy sigma=0.001320 ! Fit after self-cal, rms=0.430669Jy sigma=0.001303 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00969078 Jy ! Component: 100 - total flux cleaned = 0.00913574 Jy ! Component: 150 - total flux cleaned = 0.00813305 Jy ! Component: 200 - total flux cleaned = 0.00722073 Jy ! Total flux subtracted in 200 components = 0.00722073 Jy ! Clean residual min=-0.031873 max=0.022481 Jy/beam ! Clean residual mean=-0.000798 rms=0.007461 Jy/beam ! Combined flux in latest and established models = 0.931944 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 82 components and 0.931944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.429619Jy sigma=0.001300 ! Fit after self-cal, rms=0.428246Jy sigma=0.001297 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.308 x 7.642 at -13.75 degrees (North through East) ! Clean map min=-0.031251 max=0.63401 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.428246Jy sigma=0.001297 ! Fit after self-cal, rms=6.115020Jy sigma=0.001224 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.115020Jy sigma=0.001224 ! Fit after self-cal, rms=6.115475Jy sigma=0.001223 ! Inverting map and beam ! Estimated beam: bmin=3.251 mas, bmaj=8.665 mas, bpa=-11.19 degrees ! Estimated noise=1722.53 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116059 Jy ! Component: 100 - total flux cleaned = 0.0132486 Jy ! Component: 150 - total flux cleaned = 0.0139405 Jy ! Component: 200 - total flux cleaned = 0.0142318 Jy ! Total flux subtracted in 200 components = 0.0142318 Jy ! Clean residual min=-0.013013 max=0.016038 Jy/beam ! Clean residual mean=-0.000061 rms=0.004184 Jy/beam ! Combined flux in latest and established models = 0.946176 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 118 components and 0.946176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.115368Jy sigma=0.001221 ! Fit after self-cal, rms=6.115700Jy sigma=0.001220 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.115700Jy sigma=0.001220 ! Fit after self-cal, rms=6.161825Jy sigma=0.001218 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.161825Jy sigma=0.001218 ! Fit after self-cal, rms=6.162041Jy sigma=0.001218 ! Inverting map and beam ! Estimated beam: bmin=3.242 mas, bmaj=8.62 mas, bpa=-10.93 degrees ! Estimated noise=1720.83 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00612544 Jy ! Component: 100 - total flux cleaned = 0.00766172 Jy ! Component: 150 - total flux cleaned = 0.00817906 Jy ! Component: 200 - total flux cleaned = 0.00819083 Jy ! Total flux subtracted in 200 components = 0.00819083 Jy ! Clean residual min=-0.011724 max=0.014528 Jy/beam ! Clean residual mean=-0.000021 rms=0.003842 Jy/beam ! Combined flux in latest and established models = 0.954367 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 131 components and 0.954367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.162020Jy sigma=0.001217 ! Fit after self-cal, rms=6.162273Jy sigma=0.001217 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.071 mas, bmaj=15.56 mas, bpa=-8.281 degrees ! Estimated noise=2217.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0050705 Jy ! Component: 100 - total flux cleaned = 0.00481012 Jy ! Component: 150 - total flux cleaned = 0.00482283 Jy ! Component: 200 - total flux cleaned = 0.00499943 Jy ! Total flux subtracted in 200 components = 0.00499943 Jy ! Clean residual min=-0.015771 max=0.021152 Jy/beam ! Clean residual mean=-0.000104 rms=0.005787 Jy/beam ! Combined flux in latest and established models = 0.959366 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 144 components and 0.959366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.162274Jy sigma=0.001217 ! Fit after self-cal, rms=6.162417Jy sigma=0.001217 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.604 mas, bmaj=7.22 mas, bpa=-14.73 degrees ! Estimated noise=4649.05 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.571643 Jy ! Component: 100 - total flux cleaned = 0.733112 Jy ! Component: 150 - total flux cleaned = 0.818916 Jy ! Component: 200 - total flux cleaned = 0.872383 Jy ! Total flux subtracted in 200 components = 0.872383 Jy ! Clean residual min=-0.026986 max=0.028437 Jy/beam ! Clean residual mean=0.000585 rms=0.007828 Jy/beam ! Combined flux in latest and established models = 0.872383 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.872383 Jy ! Inverting map and beam ! Estimated beam: bmin=3.242 mas, bmaj=8.62 mas, bpa=-10.93 degrees ! Estimated noise=1720.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0490063 Jy ! Component: 100 - total flux cleaned = 0.0687504 Jy ! Component: 150 - total flux cleaned = 0.076265 Jy ! Component: 200 - total flux cleaned = 0.080284 Jy ! Total flux subtracted in 200 components = 0.080284 Jy ! Clean residual min=-0.016350 max=0.019781 Jy/beam ! Clean residual mean=-0.000049 rms=0.004472 Jy/beam ! Combined flux in latest and established models = 0.952667 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 59 components and 0.952667 Jy ! Inverting map ! Added new window around map position (18, 11.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0242444 Jy ! Component: 100 - total flux cleaned = 0.0332734 Jy ! Component: 150 - total flux cleaned = 0.0359996 Jy ! Component: 200 - total flux cleaned = 0.0383805 Jy ! Total flux subtracted in 200 components = 0.0383805 Jy ! Clean residual min=-0.012516 max=0.009853 Jy/beam ! Clean residual mean=-0.000268 rms=0.003031 Jy/beam ! Combined flux in latest and established models = 0.991047 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 89 components and 0.991047 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.071 mas, bmaj=15.56 mas, bpa=-8.281 degrees ! Estimated noise=2217.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0061158 Jy ! Component: 100 - total flux cleaned = 0.00827278 Jy ! Component: 150 - total flux cleaned = 0.00851678 Jy ! Component: 200 - total flux cleaned = 0.00873683 Jy ! Total flux subtracted in 200 components = 0.00873683 Jy ! Clean residual min=-0.011339 max=0.010532 Jy/beam ! Clean residual mean=-0.000714 rms=0.003600 Jy/beam ! Combined flux in latest and established models = 0.999784 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 113 components and 0.999784 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.242 mas, bmaj=8.62 mas, bpa=-10.93 degrees ! Estimated noise=1720.83 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000335768 Jy ! Component: 100 - total flux cleaned = -0.000337462 Jy ! Component: 150 - total flux cleaned = -9.6787e-05 Jy ! Component: 200 - total flux cleaned = -8.34096e-05 Jy ! Total flux subtracted in 200 components = -8.34096e-05 Jy ! Clean residual min=-0.010428 max=0.008915 Jy/beam ! Clean residual mean=-0.000320 rms=0.002534 Jy/beam ! Combined flux in latest and established models = 0.9997 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 133 components and 0.9997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.161723Jy sigma=0.001214 ! Fit after self-cal, rms=6.161775Jy sigma=0.001214 wmodel J2213-2529_S_1997_08_27_yyk\_map.mod ! Writing 133 model components to file: J2213-2529_S_1997_08_27_yyk_map.mod wobs J2213-2529_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J2213-2529_S_1997_08_27_yyk_uvs.fits wwins J2213-2529_S_1997_08_27_yyk\_map.win ! wwins: Wrote 3 windows to J2213-2529_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00322336 Jy ! Component: 100 - total flux cleaned = -0.00532444 Jy ! Component: 150 - total flux cleaned = -0.00753363 Jy ! Component: 200 - total flux cleaned = -0.00882842 Jy ! Component: 250 - total flux cleaned = -0.0100611 Jy ! Component: 300 - total flux cleaned = -0.0117124 Jy ! Component: 350 - total flux cleaned = -0.0133024 Jy ! Component: 400 - total flux cleaned = -0.0148318 Jy ! Component: 450 - total flux cleaned = -0.0160934 Jy ! Component: 500 - total flux cleaned = -0.0170083 Jy ! Component: 550 - total flux cleaned = -0.0177941 Jy ! Component: 600 - total flux cleaned = -0.0185556 Jy ! Component: 650 - total flux cleaned = -0.0191106 Jy ! Component: 700 - total flux cleaned = -0.0198324 Jy ! Component: 750 - total flux cleaned = -0.0206219 Jy ! Component: 800 - total flux cleaned = -0.0213049 Jy ! Component: 850 - total flux cleaned = -0.021971 Jy ! Component: 900 - total flux cleaned = -0.0225396 Jy ! Component: 950 - total flux cleaned = -0.0230948 Jy ! Component: 1000 - total flux cleaned = -0.0234798 Jy ! Component: 1050 - total flux cleaned = -0.0240057 Jy ! Component: 1100 - total flux cleaned = -0.0243699 Jy ! Component: 1150 - total flux cleaned = -0.0243689 Jy ! Component: 1200 - total flux cleaned = -0.0245801 Jy ! Component: 1250 - total flux cleaned = -0.0247189 Jy ! Component: 1300 - total flux cleaned = -0.0250554 Jy ! Component: 1350 - total flux cleaned = -0.0250564 Jy ! Component: 1400 - total flux cleaned = -0.0253807 Jy ! Component: 1450 - total flux cleaned = -0.0255069 Jy ! Component: 1500 - total flux cleaned = -0.0255701 Jy ! Component: 1550 - total flux cleaned = -0.0258162 Jy ! Component: 1600 - total flux cleaned = -0.0259365 Jy ! Component: 1650 - total flux cleaned = -0.0261127 Jy ! Component: 1700 - total flux cleaned = -0.0262271 Jy ! Component: 1750 - total flux cleaned = -0.026453 Jy ! Component: 1800 - total flux cleaned = -0.0266724 Jy ! Component: 1850 - total flux cleaned = -0.0267799 Jy ! Component: 1900 - total flux cleaned = -0.0270971 Jy ! Component: 1950 - total flux cleaned = -0.0271999 Jy ! Component: 2000 - total flux cleaned = -0.0274028 Jy ! Total flux subtracted in 2048 components = -0.0276032 Jy ! Clean residual min=-0.002948 max=0.002732 Jy/beam ! Clean residual mean=-0.000095 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.972097 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 263 components and 0.972097 Jy ![Exited script file: muppet] wmap "J2213-2529_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.242 x 8.62 at -10.93 degrees (North through East) ! Clean map min=-0.0076146 max=0.64896 Jy/beam ! Writing clean map to FITS file: J2213-2529_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.64896 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000975183 device "J2213-2529_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2213-2529_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.450806 0.450806 0.901612 1.80322 3.60645 7.21289 14.4258 28.8516 57.7032 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.648 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.242 x 8.62 at -10.93 degrees (North through East) ! Clean map min=-0.0076146 max=0.64896 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2213-2529_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2213-2529_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2213-2529_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 20:09:15 2007