! Started logfile: J2202-2335_S_1997_08_27_yyk_uvs.log on Sun Jan 7 20:05:17 2007 obs J2202-2335_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J2202-2335_S_1997_08_27_yyk_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.566514 visibilities/baseline/integration-bin. ! Found source: J2202-2335 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 14888 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2202-2335_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.656674 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.89 mas, bmaj=5.915 mas, bpa=-19.03 degrees ! Estimated noise=3271.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.35647 Jy ! Component: 100 - total flux cleaned = 0.407107 Jy ! Total flux subtracted in 100 components = 0.407107 Jy ! Clean residual min=-0.057047 max=0.051718 Jy/beam ! Clean residual mean=-0.003552 rms=0.013704 Jy/beam ! Combined flux in latest and established models = 0.407107 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.407107 Jy ! ! Correcting IF 1. ! A total of 514 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 368 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 368 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 368 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.451882Jy sigma=0.001360 ! Fit after self-cal, rms=0.448401Jy sigma=0.001346 ! Inverting map and beam ! Estimated beam: bmin=2.89 mas, bmaj=5.915 mas, bpa=-19.03 degrees ! Estimated noise=3271.23 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.295 mas, bmaj=7.576 mas, bpa=-14.85 degrees ! Estimated noise=1781.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.081041 Jy ! Component: 100 - total flux cleaned = 0.106973 Jy ! Component: 150 - total flux cleaned = 0.111763 Jy ! Component: 200 - total flux cleaned = 0.114352 Jy ! Total flux subtracted in 200 components = 0.114352 Jy ! Clean residual min=-0.025600 max=0.026018 Jy/beam ! Clean residual mean=-0.001580 rms=0.006682 Jy/beam ! Combined flux in latest and established models = 0.521458 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 23 components and 0.521458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.435347Jy sigma=0.001307 ! Fit after self-cal, rms=0.435341Jy sigma=0.001307 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.295 x 7.576 at -14.85 degrees (North through East) ! Clean map min=-0.025209 max=0.45744 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02089 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.09 HN 0.89 KP 0.90 ! LA 0.95 MK 1.01 NL 1.00* OV 1.16 ! PT 1.00* SC 0.83 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.990883 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.13 HN 0.96 KP 0.91 ! LA 1.04 MK 1.06 NL 0.93 OV 1.12 ! PT 1.00* SC 0.88 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.05813 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 HN 0.95 KP 0.90 ! LA 0.80 MK 0.88 NL 0.92 OV 1.00 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.990219 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.10 HN 1.06 KP 0.94 ! LA 0.89 MK 1.02 NL 1.05 OV 1.02 ! PT 1.00* SC 1.01 ! ! ! Fit before self-cal, rms=0.435341Jy sigma=0.001307 ! Fit after self-cal, rms=0.412073Jy sigma=0.001294 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.412073Jy sigma=0.001294 ! Fit after self-cal, rms=0.412033Jy sigma=0.001294 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.254 mas, bmaj=7.445 mas, bpa=-13.85 degrees ! Estimated noise=1778.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185665 Jy ! Component: 100 - total flux cleaned = 0.0199782 Jy ! Component: 150 - total flux cleaned = 0.0204212 Jy ! Component: 200 - total flux cleaned = 0.021194 Jy ! Total flux subtracted in 200 components = 0.021194 Jy ! Clean residual min=-0.025064 max=0.019597 Jy/beam ! Clean residual mean=-0.001149 rms=0.005574 Jy/beam ! Combined flux in latest and established models = 0.542652 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 34 components and 0.542653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.411114Jy sigma=0.001291 ! Fit after self-cal, rms=0.411082Jy sigma=0.001291 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.411082Jy sigma=0.001291 ! Fit after self-cal, rms=0.409096Jy sigma=0.001284 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -8.34251e-05 Jy ! Component: 100 - total flux cleaned = 0.000609825 Jy ! Component: 150 - total flux cleaned = 0.000609603 Jy ! Component: 200 - total flux cleaned = 0.00117348 Jy ! Total flux subtracted in 200 components = 0.00117348 Jy ! Clean residual min=-0.022568 max=0.019619 Jy/beam ! Clean residual mean=-0.001125 rms=0.005276 Jy/beam ! Combined flux in latest and established models = 0.543826 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 43 components and 0.543826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.408667Jy sigma=0.001283 ! Fit after self-cal, rms=0.408349Jy sigma=0.001282 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.254 x 7.445 at -13.85 degrees (North through East) ! Clean map min=-0.021634 max=0.45775 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.408349Jy sigma=0.001282 ! Fit after self-cal, rms=2.630346Jy sigma=0.001244 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.630346Jy sigma=0.001244 ! Fit after self-cal, rms=2.630399Jy sigma=0.001244 ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=8.269 mas, bpa=-11.55 degrees ! Estimated noise=1769.69 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00645649 Jy ! Component: 100 - total flux cleaned = 0.00697477 Jy ! Component: 150 - total flux cleaned = 0.00782022 Jy ! Component: 200 - total flux cleaned = 0.00783828 Jy ! Total flux subtracted in 200 components = 0.00783828 Jy ! Clean residual min=-0.011037 max=0.013533 Jy/beam ! Clean residual mean=-0.000129 rms=0.003352 Jy/beam ! Combined flux in latest and established models = 0.551664 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.551664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.629846Jy sigma=0.001241 ! Fit after self-cal, rms=2.629750Jy sigma=0.001241 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.629750Jy sigma=0.001241 ! Fit after self-cal, rms=5.229412Jy sigma=0.001238 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.229412Jy sigma=0.001238 ! Fit after self-cal, rms=5.229463Jy sigma=0.001239 ! Inverting map and beam ! Estimated beam: bmin=3.134 mas, bmaj=8.258 mas, bpa=-11.37 degrees ! Estimated noise=1767.8 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00595889 Jy ! Component: 100 - total flux cleaned = 0.00596883 Jy ! Component: 150 - total flux cleaned = 0.00569558 Jy ! Component: 200 - total flux cleaned = 0.00519183 Jy ! Total flux subtracted in 200 components = 0.00519183 Jy ! Clean residual min=-0.009224 max=0.012486 Jy/beam ! Clean residual mean=-0.000108 rms=0.002940 Jy/beam ! Combined flux in latest and established models = 0.556856 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.556856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.229086Jy sigma=0.001237 ! Fit after self-cal, rms=5.229093Jy sigma=0.001237 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.842 mas, bmaj=13.96 mas, bpa=-8.003 degrees ! Estimated noise=2303.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000551258 Jy ! Component: 100 - total flux cleaned = -0.00136443 Jy ! Component: 150 - total flux cleaned = -0.00170975 Jy ! Component: 200 - total flux cleaned = -0.00202578 Jy ! Total flux subtracted in 200 components = -0.00202578 Jy ! Clean residual min=-0.009864 max=0.011656 Jy/beam ! Clean residual mean=-0.000217 rms=0.002916 Jy/beam ! Combined flux in latest and established models = 0.55483 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 0.55483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.228949Jy sigma=0.001237 ! Fit after self-cal, rms=5.228946Jy sigma=0.001237 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.707 mas, bmaj=6.882 mas, bpa=-12.21 degrees ! Estimated noise=3829.96 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.408896 Jy ! Component: 100 - total flux cleaned = 0.476515 Jy ! Component: 150 - total flux cleaned = 0.507548 Jy ! Component: 200 - total flux cleaned = 0.524308 Jy ! Total flux subtracted in 200 components = 0.524308 Jy ! Clean residual min=-0.022791 max=0.019713 Jy/beam ! Clean residual mean=-0.000551 rms=0.005767 Jy/beam ! Combined flux in latest and established models = 0.524308 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.524308 Jy ! Inverting map and beam ! Estimated beam: bmin=3.134 mas, bmaj=8.258 mas, bpa=-11.37 degrees ! Estimated noise=1767.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, -5.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0217025 Jy ! Component: 100 - total flux cleaned = 0.031223 Jy ! Component: 150 - total flux cleaned = 0.0337257 Jy ! Component: 200 - total flux cleaned = 0.0346124 Jy ! Total flux subtracted in 200 components = 0.0346124 Jy ! Clean residual min=-0.007967 max=0.009853 Jy/beam ! Clean residual mean=-0.000103 rms=0.002350 Jy/beam ! Combined flux in latest and established models = 0.55892 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 51 components and 0.55892 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.842 mas, bmaj=13.96 mas, bpa=-8.003 degrees ! Estimated noise=2303.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 9.29717e-05 Jy ! Component: 100 - total flux cleaned = -0.000497444 Jy ! Component: 150 - total flux cleaned = -0.000831222 Jy ! Component: 200 - total flux cleaned = -0.00127749 Jy ! Total flux subtracted in 200 components = -0.00127749 Jy ! Clean residual min=-0.007141 max=0.009325 Jy/beam ! Clean residual mean=-0.000169 rms=0.002392 Jy/beam ! Combined flux in latest and established models = 0.557643 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 73 components and 0.557643 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.134 mas, bmaj=8.258 mas, bpa=-11.37 degrees ! Estimated noise=1767.8 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000629457 Jy ! Component: 100 - total flux cleaned = 0.000419526 Jy ! Component: 150 - total flux cleaned = 0.000219328 Jy ! Component: 200 - total flux cleaned = 0.000215614 Jy ! Total flux subtracted in 200 components = 0.000215614 Jy ! Clean residual min=-0.006331 max=0.008945 Jy/beam ! Clean residual mean=-0.000069 rms=0.002031 Jy/beam ! Combined flux in latest and established models = 0.557859 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 87 components and 0.557859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.227386Jy sigma=0.001235 ! Fit after self-cal, rms=5.227491Jy sigma=0.001235 wmodel J2202-2335_S_1997_08_27_yyk\_map.mod ! Writing 87 model components to file: J2202-2335_S_1997_08_27_yyk_map.mod wobs J2202-2335_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J2202-2335_S_1997_08_27_yyk_uvs.fits wwins J2202-2335_S_1997_08_27_yyk\_map.win ! wwins: Wrote 2 windows to J2202-2335_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277058 Jy ! Component: 100 - total flux cleaned = 0.00348268 Jy ! Component: 150 - total flux cleaned = 0.00369752 Jy ! Component: 200 - total flux cleaned = 0.00430957 Jy ! Component: 250 - total flux cleaned = 0.00479205 Jy ! Component: 300 - total flux cleaned = 0.00506717 Jy ! Component: 350 - total flux cleaned = 0.00515831 Jy ! Component: 400 - total flux cleaned = 0.00541739 Jy ! Component: 450 - total flux cleaned = 0.00566418 Jy ! Component: 500 - total flux cleaned = 0.00558406 Jy ! Component: 550 - total flux cleaned = 0.00597495 Jy ! Component: 600 - total flux cleaned = 0.00627744 Jy ! Component: 650 - total flux cleaned = 0.00627481 Jy ! Component: 700 - total flux cleaned = 0.00627371 Jy ! Component: 750 - total flux cleaned = 0.00641263 Jy ! Component: 800 - total flux cleaned = 0.00641059 Jy ! Component: 850 - total flux cleaned = 0.0066104 Jy ! Component: 900 - total flux cleaned = 0.00648008 Jy ! Component: 950 - total flux cleaned = 0.00654481 Jy ! Component: 1000 - total flux cleaned = 0.006482 Jy ! Component: 1050 - total flux cleaned = 0.00660641 Jy ! Component: 1100 - total flux cleaned = 0.00672565 Jy ! Component: 1150 - total flux cleaned = 0.00654864 Jy ! Component: 1200 - total flux cleaned = 0.00649126 Jy ! Component: 1250 - total flux cleaned = 0.00654791 Jy ! Component: 1300 - total flux cleaned = 0.00643677 Jy ! Component: 1350 - total flux cleaned = 0.00649273 Jy ! Component: 1400 - total flux cleaned = 0.00643952 Jy ! Component: 1450 - total flux cleaned = 0.0064936 Jy ! Component: 1500 - total flux cleaned = 0.00654605 Jy ! Component: 1550 - total flux cleaned = 0.00644411 Jy ! Component: 1600 - total flux cleaned = 0.00644485 Jy ! Component: 1650 - total flux cleaned = 0.00639449 Jy ! Component: 1700 - total flux cleaned = 0.00620007 Jy ! Component: 1750 - total flux cleaned = 0.00600908 Jy ! Component: 1800 - total flux cleaned = 0.00582103 Jy ! Component: 1850 - total flux cleaned = 0.00563467 Jy ! Component: 1900 - total flux cleaned = 0.00535889 Jy ! Component: 1950 - total flux cleaned = 0.00517828 Jy ! Component: 2000 - total flux cleaned = 0.00495511 Jy ! Total flux subtracted in 2048 components = 0.00469006 Jy ! Clean residual min=-0.002426 max=0.002566 Jy/beam ! Clean residual mean=-0.000053 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.562549 Jy keep ! Adding 128 model components to the UV plane model. ! The established model now contains 215 components and 0.562549 Jy ![Exited script file: muppet] wmap "J2202-2335_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.134 x 8.258 at -11.37 degrees (North through East) ! Clean map min=-0.0058216 max=0.47855 Jy/beam ! Writing clean map to FITS file: J2202-2335_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.478548 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000882982 device "J2202-2335_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2202-2335_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.553538 0.553538 1.10708 2.21415 4.4283 8.85661 17.7132 35.4264 70.8528 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.478 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.134 x 8.258 at -11.37 degrees (North through East) ! Clean map min=-0.0058216 max=0.47855 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2202-2335_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2202-2335_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2202-2335_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 20:05:23 2007