! Started logfile: J2202-2335_S_1997_07_02_yyk_uvs.log on Sun Jan 7 20:05:10 2007 obs J2202-2335_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J2202-2335_S_1997_07_02_yyk_uva.fits ! AN table 1: 136 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1.26765 visibilities/baseline/integration-bin. ! Found source: J2202-2335 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 754 lines of history. ! ! Reading 31032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2202-2335_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.663552 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.687 mas, bmaj=7.389 mas, bpa=-5.692 degrees ! Estimated noise=1444.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.476494 Jy ! Component: 100 - total flux cleaned = 0.552394 Jy ! Total flux subtracted in 100 components = 0.552394 Jy ! Clean residual min=-0.023381 max=0.022321 Jy/beam ! Clean residual mean=0.000190 rms=0.005490 Jy/beam ! Combined flux in latest and established models = 0.552394 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.552394 Jy ! ! Correcting IF 1. ! A total of 298 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.345089Jy sigma=0.001569 ! Fit after self-cal, rms=0.344947Jy sigma=0.001569 ! Inverting map and beam ! Estimated beam: bmin=2.687 mas, bmaj=7.389 mas, bpa=-5.692 degrees ! Estimated noise=1444.71 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.445 mas, bmaj=9.513 mas, bpa=-7.05 degrees ! Estimated noise=1041.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0246327 Jy ! Component: 100 - total flux cleaned = 0.030675 Jy ! Component: 150 - total flux cleaned = 0.0313347 Jy ! Component: 200 - total flux cleaned = 0.031895 Jy ! Total flux subtracted in 200 components = 0.031895 Jy ! Clean residual min=-0.015932 max=0.018984 Jy/beam ! Clean residual mean=0.000052 rms=0.005468 Jy/beam ! Combined flux in latest and established models = 0.584289 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.584289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343158Jy sigma=0.001562 ! Fit after self-cal, rms=0.343113Jy sigma=0.001562 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.445 x 9.513 at -7.05 degrees (North through East) ! Clean map min=-0.015707 max=0.55171 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02026 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.08 HN 0.94 KP 0.90 ! LA 0.99 MK 1.03 NL 1.00* OV 1.10 ! PT 0.95 SC 0.83 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.978049 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.18 HN 1.04 KP 0.93 ! LA 1.10 MK 1.04 NL 0.96 OV 1.04 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03651 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.08 HN 0.96 KP 0.92 ! LA 0.81 MK 0.88 NL 0.96 OV 0.96 ! PT 1.07 SC 1.05 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.980514 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.13 HN 1.16 KP 0.92 ! LA 0.88 MK 1.06 NL 1.08 OV 0.98 ! PT 0.90 SC 1.05 ! ! ! Fit before self-cal, rms=0.343113Jy sigma=0.001562 ! Fit after self-cal, rms=0.331118Jy sigma=0.001532 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.331118Jy sigma=0.001532 ! Fit after self-cal, rms=0.331117Jy sigma=0.001532 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=9.465 mas, bpa=-6.483 degrees ! Estimated noise=1038.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, -6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111445 Jy ! Component: 100 - total flux cleaned = 0.0108658 Jy ! Component: 150 - total flux cleaned = 0.0106532 Jy ! Component: 200 - total flux cleaned = 0.0106557 Jy ! Total flux subtracted in 200 components = 0.0106557 Jy ! Clean residual min=-0.006315 max=0.008492 Jy/beam ! Clean residual mean=-0.000041 rms=0.001979 Jy/beam ! Combined flux in latest and established models = 0.594944 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 47 components and 0.594944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330654Jy sigma=0.001529 ! Fit after self-cal, rms=0.330587Jy sigma=0.001529 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330587Jy sigma=0.001529 ! Fit after self-cal, rms=0.327744Jy sigma=0.001517 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267151 Jy ! Component: 100 - total flux cleaned = 0.00232446 Jy ! Component: 150 - total flux cleaned = 0.00216985 Jy ! Component: 200 - total flux cleaned = 0.00203284 Jy ! Total flux subtracted in 200 components = 0.00203284 Jy ! Clean residual min=-0.006305 max=0.007545 Jy/beam ! Clean residual mean=-0.000043 rms=0.001889 Jy/beam ! Combined flux in latest and established models = 0.596977 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 58 components and 0.596977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.327568Jy sigma=0.001517 ! Fit after self-cal, rms=0.327213Jy sigma=0.001515 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.456 x 9.465 at -6.483 degrees (North through East) ! Clean map min=-0.0062649 max=0.55359 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.327213Jy sigma=0.001515 ! Fit after self-cal, rms=0.321808Jy sigma=0.001507 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321808Jy sigma=0.001507 ! Fit after self-cal, rms=0.321734Jy sigma=0.001507 ! Inverting map and beam ! Estimated beam: bmin=3.445 mas, bmaj=9.468 mas, bpa=-6.726 degrees ! Estimated noise=1034.48 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00409551 Jy ! Component: 100 - total flux cleaned = 0.00410092 Jy ! Component: 150 - total flux cleaned = 0.00398411 Jy ! Component: 200 - total flux cleaned = 0.00376732 Jy ! Total flux subtracted in 200 components = 0.00376732 Jy ! Clean residual min=-0.005582 max=0.005845 Jy/beam ! Clean residual mean=-0.000009 rms=0.001660 Jy/beam ! Combined flux in latest and established models = 0.600745 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 77 components and 0.600745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321589Jy sigma=0.001506 ! Fit after self-cal, rms=0.321547Jy sigma=0.001506 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321547Jy sigma=0.001506 ! Fit after self-cal, rms=0.321496Jy sigma=0.001503 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321496Jy sigma=0.001503 ! Fit after self-cal, rms=0.321482Jy sigma=0.001503 ! Inverting map and beam ! Estimated beam: bmin=3.439 mas, bmaj=9.467 mas, bpa=-6.776 degrees ! Estimated noise=1034.91 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308643 Jy ! Component: 100 - total flux cleaned = 0.0030908 Jy ! Component: 150 - total flux cleaned = 0.00309266 Jy ! Component: 200 - total flux cleaned = 0.00301229 Jy ! Total flux subtracted in 200 components = 0.00301229 Jy ! Clean residual min=-0.005332 max=0.005700 Jy/beam ! Clean residual mean=-0.000019 rms=0.001600 Jy/beam ! Combined flux in latest and established models = 0.603757 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 86 components and 0.603757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321413Jy sigma=0.001503 ! Fit after self-cal, rms=0.321399Jy sigma=0.001503 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.248 mas, bmaj=19.33 mas, bpa=-3.278 degrees ! Estimated noise=1285.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319497 Jy ! Component: 100 - total flux cleaned = 9.46111e-05 Jy ! Component: 150 - total flux cleaned = -0.000163911 Jy ! Component: 200 - total flux cleaned = -0.000334723 Jy ! Total flux subtracted in 200 components = -0.000334723 Jy ! Clean residual min=-0.005043 max=0.006323 Jy/beam ! Clean residual mean=-0.000032 rms=0.002032 Jy/beam ! Combined flux in latest and established models = 0.603422 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 108 components and 0.603422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321390Jy sigma=0.001503 ! Fit after self-cal, rms=0.321378Jy sigma=0.001503 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.692 mas, bmaj=7.407 mas, bpa=-5.55 degrees ! Estimated noise=1420.83 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.469521 Jy ! Component: 100 - total flux cleaned = 0.545292 Jy ! Component: 150 - total flux cleaned = 0.577006 Jy ! Component: 200 - total flux cleaned = 0.593283 Jy ! Total flux subtracted in 200 components = 0.593283 Jy ! Clean residual min=-0.008812 max=0.010227 Jy/beam ! Clean residual mean=0.000023 rms=0.002540 Jy/beam ! Combined flux in latest and established models = 0.593284 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.593284 Jy ! Inverting map and beam ! Estimated beam: bmin=3.439 mas, bmaj=9.467 mas, bpa=-6.776 degrees ! Estimated noise=1034.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101083 Jy ! Component: 100 - total flux cleaned = 0.0109594 Jy ! Component: 150 - total flux cleaned = 0.0113144 Jy ! Component: 200 - total flux cleaned = 0.0113195 Jy ! Total flux subtracted in 200 components = 0.0113195 Jy ! Clean residual min=-0.006012 max=0.005721 Jy/beam ! Clean residual mean=-0.000016 rms=0.001674 Jy/beam ! Combined flux in latest and established models = 0.604603 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 50 components and 0.604603 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.248 mas, bmaj=19.33 mas, bpa=-3.278 degrees ! Estimated noise=1285.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163953 Jy ! Component: 100 - total flux cleaned = 5.5426e-05 Jy ! Component: 150 - total flux cleaned = -0.00014345 Jy ! Component: 200 - total flux cleaned = -0.000399173 Jy ! Total flux subtracted in 200 components = -0.000399173 Jy ! Clean residual min=-0.005138 max=0.006177 Jy/beam ! Clean residual mean=-0.000031 rms=0.002043 Jy/beam ! Combined flux in latest and established models = 0.604204 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 68 components and 0.604204 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.439 mas, bmaj=9.467 mas, bpa=-6.776 degrees ! Estimated noise=1034.91 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162134 Jy ! Component: 100 - total flux cleaned = -0.000159509 Jy ! Component: 150 - total flux cleaned = -0.000265373 Jy ! Component: 200 - total flux cleaned = -0.000268206 Jy ! Total flux subtracted in 200 components = -0.000268206 Jy ! Clean residual min=-0.005484 max=0.005447 Jy/beam ! Clean residual mean=-0.000018 rms=0.001600 Jy/beam ! Combined flux in latest and established models = 0.603936 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 79 components and 0.603936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321460Jy sigma=0.001503 ! Fit after self-cal, rms=0.321450Jy sigma=0.001503 wmodel J2202-2335_S_1997_07_02_yyk\_map.mod ! Writing 79 model components to file: J2202-2335_S_1997_07_02_yyk_map.mod wobs J2202-2335_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J2202-2335_S_1997_07_02_yyk_uvs.fits wwins J2202-2335_S_1997_07_02_yyk\_map.win ! wwins: Wrote 2 windows to J2202-2335_S_1997_07_02_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116146 Jy ! Component: 100 - total flux cleaned = -0.00107664 Jy ! Component: 150 - total flux cleaned = -0.000642964 Jy ! Component: 200 - total flux cleaned = -0.000481149 Jy ! Component: 250 - total flux cleaned = -0.000711108 Jy ! Component: 300 - total flux cleaned = -0.000710442 Jy ! Component: 350 - total flux cleaned = -0.000710768 Jy ! Component: 400 - total flux cleaned = -0.000984901 Jy ! Component: 450 - total flux cleaned = -0.00118351 Jy ! Component: 500 - total flux cleaned = -0.00112046 Jy ! Component: 550 - total flux cleaned = -0.00112094 Jy ! Component: 600 - total flux cleaned = -0.00100083 Jy ! Component: 650 - total flux cleaned = -0.00105901 Jy ! Component: 700 - total flux cleaned = -0.000886927 Jy ! Component: 750 - total flux cleaned = -0.000777172 Jy ! Component: 800 - total flux cleaned = -0.000724126 Jy ! Component: 850 - total flux cleaned = -0.000620596 Jy ! Component: 900 - total flux cleaned = -0.000724478 Jy ! Component: 950 - total flux cleaned = -0.000673581 Jy ! Component: 1000 - total flux cleaned = -0.000672899 Jy ! Component: 1050 - total flux cleaned = -0.00057734 Jy ! Component: 1100 - total flux cleaned = -0.000530755 Jy ! Component: 1150 - total flux cleaned = -0.000484552 Jy ! Component: 1200 - total flux cleaned = -0.000574566 Jy ! Component: 1250 - total flux cleaned = -0.000618235 Jy ! Component: 1300 - total flux cleaned = -0.000661666 Jy ! Component: 1350 - total flux cleaned = -0.000704236 Jy ! Component: 1400 - total flux cleaned = -0.000829042 Jy ! Component: 1450 - total flux cleaned = -0.000869213 Jy ! Component: 1500 - total flux cleaned = -0.000829242 Jy ! Component: 1550 - total flux cleaned = -0.00098918 Jy ! Component: 1600 - total flux cleaned = -0.00114602 Jy ! Component: 1650 - total flux cleaned = -0.00106871 Jy ! Component: 1700 - total flux cleaned = -0.00114551 Jy ! Component: 1750 - total flux cleaned = -0.00118363 Jy ! Component: 1800 - total flux cleaned = -0.00125761 Jy ! Component: 1850 - total flux cleaned = -0.00133024 Jy ! Component: 1900 - total flux cleaned = -0.00143843 Jy ! Component: 1950 - total flux cleaned = -0.00147345 Jy ! Component: 2000 - total flux cleaned = -0.00150823 Jy ! Total flux subtracted in 2048 components = -0.00147346 Jy ! Clean residual min=-0.002202 max=0.001940 Jy/beam ! Clean residual mean=0.000014 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.602462 Jy keep ! Adding 142 model components to the UV plane model. ! The established model now contains 221 components and 0.602463 Jy ![Exited script file: muppet] wmap "J2202-2335_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.439 x 9.467 at -6.776 degrees (North through East) ! Clean map min=-0.0040747 max=0.55091 Jy/beam ! Writing clean map to FITS file: J2202-2335_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.550907 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000705761 device "J2202-2335_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J2202-2335_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.384327 0.384327 0.768653 1.53731 3.07461 6.14923 12.2985 24.5969 49.1938 98.3876 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.55 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.439 x 9.467 at -6.776 degrees (North through East) ! Clean map min=-0.0040747 max=0.55091 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2202-2335_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J2202-2335_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2202-2335_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 20:05:17 2007