! Started logfile: J2138-2439_S_1997_08_27_yyk_uvs.log on Sun Jan 7 20:01:02 2007 obs J2138-2439_S_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J2138-2439_S_1997_08_27_yyk_uva.fits ! AN table 1: 140 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J2138-2439 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 14700 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2138-2439_S_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.691274 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=6.434 mas, bpa=-20.36 degrees ! Estimated noise=3256.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.390123 Jy ! Component: 100 - total flux cleaned = 0.410417 Jy ! Total flux subtracted in 100 components = 0.410417 Jy ! Clean residual min=-0.068473 max=0.075227 Jy/beam ! Clean residual mean=-0.000144 rms=0.016480 Jy/beam ! Combined flux in latest and established models = 0.410417 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.410417 Jy ! ! Correcting IF 1. ! A total of 525 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 351 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 351 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 350 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.473970Jy sigma=0.001385 ! Fit after self-cal, rms=0.449036Jy sigma=0.001324 ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=6.434 mas, bpa=-20.36 degrees ! Estimated noise=3256.37 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.362 mas, bmaj=7.921 mas, bpa=-16.67 degrees ! Estimated noise=1837.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.109007 Jy ! Component: 100 - total flux cleaned = 0.132333 Jy ! Component: 150 - total flux cleaned = 0.133158 Jy ! Component: 200 - total flux cleaned = 0.134487 Jy ! Total flux subtracted in 200 components = 0.134487 Jy ! Clean residual min=-0.023680 max=0.028119 Jy/beam ! Clean residual mean=-0.000337 rms=0.006409 Jy/beam ! Combined flux in latest and established models = 0.544905 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 24 components and 0.544905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.428870Jy sigma=0.001256 ! Fit after self-cal, rms=0.428853Jy sigma=0.001256 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.362 x 7.921 at -16.67 degrees (North through East) ! Clean map min=-0.022671 max=0.52328 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 96 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02188 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.07 HN 0.90 KP 0.95 ! LA 1.01 MK 0.98 NL 1.00* OV 1.06 ! PT 1.00* SC 0.86 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.986644 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.13 HN 0.99 KP 0.99 ! LA 1.08 MK 1.10 NL 0.93 OV 1.00 ! PT 0.99 SC 0.89 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.05853 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.06 HN 0.93 KP 0.92 ! LA 0.80 MK 0.86 NL 0.90 OV 0.91 ! PT 1.07 SC 1.02 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.990678 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.08 HN 1.13 KP 0.96 ! LA 0.89 MK 1.02 NL 1.04 OV 0.93 ! PT 0.97 SC 1.02 ! ! ! Fit before self-cal, rms=0.428853Jy sigma=0.001256 ! Fit after self-cal, rms=0.412737Jy sigma=0.001241 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.412737Jy sigma=0.001241 ! Fit after self-cal, rms=0.412561Jy sigma=0.001240 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=7.773 mas, bpa=-15.73 degrees ! Estimated noise=1852.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178824 Jy ! Component: 100 - total flux cleaned = 0.0189283 Jy ! Component: 150 - total flux cleaned = 0.0194224 Jy ! Component: 200 - total flux cleaned = 0.0198697 Jy ! Total flux subtracted in 200 components = 0.0198697 Jy ! Clean residual min=-0.020355 max=0.021398 Jy/beam ! Clean residual mean=-0.000339 rms=0.005301 Jy/beam ! Combined flux in latest and established models = 0.564774 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 36 components and 0.564774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.411611Jy sigma=0.001237 ! Fit after self-cal, rms=0.411607Jy sigma=0.001237 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.411607Jy sigma=0.001237 ! Fit after self-cal, rms=0.409638Jy sigma=0.001231 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146684 Jy ! Component: 100 - total flux cleaned = 0.00149053 Jy ! Component: 150 - total flux cleaned = 0.00189319 Jy ! Component: 200 - total flux cleaned = 0.00190838 Jy ! Total flux subtracted in 200 components = 0.00190838 Jy ! Clean residual min=-0.019169 max=0.020455 Jy/beam ! Clean residual mean=-0.000338 rms=0.005119 Jy/beam ! Combined flux in latest and established models = 0.566683 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 43 components and 0.566683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.409063Jy sigma=0.001229 ! Fit after self-cal, rms=0.408573Jy sigma=0.001228 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.324 x 7.773 at -15.73 degrees (North through East) ! Clean map min=-0.018361 max=0.53004 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.408573Jy sigma=0.001228 ! Fit after self-cal, rms=5.284961Jy sigma=0.001186 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.284961Jy sigma=0.001186 ! Fit after self-cal, rms=5.288589Jy sigma=0.001186 ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=8.481 mas, bpa=-13.57 degrees ! Estimated noise=1843.86 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00490383 Jy ! Component: 100 - total flux cleaned = 0.00577276 Jy ! Component: 150 - total flux cleaned = 0.00648309 Jy ! Component: 200 - total flux cleaned = 0.00649526 Jy ! Total flux subtracted in 200 components = 0.00649526 Jy ! Clean residual min=-0.010522 max=0.010014 Jy/beam ! Clean residual mean=-0.000170 rms=0.002632 Jy/beam ! Combined flux in latest and established models = 0.573178 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.573178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.288494Jy sigma=0.001184 ! Fit after self-cal, rms=5.288287Jy sigma=0.001184 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.288287Jy sigma=0.001184 ! Fit after self-cal, rms=7.392192Jy sigma=0.001182 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=7.392192Jy sigma=0.001182 ! Fit after self-cal, rms=7.391955Jy sigma=0.001182 ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=8.465 mas, bpa=-13.26 degrees ! Estimated noise=1847.91 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00525403 Jy ! Component: 100 - total flux cleaned = 0.00550765 Jy ! Component: 150 - total flux cleaned = 0.0053083 Jy ! Component: 200 - total flux cleaned = 0.00512122 Jy ! Total flux subtracted in 200 components = 0.00512122 Jy ! Clean residual min=-0.009007 max=0.008273 Jy/beam ! Clean residual mean=-0.000203 rms=0.002288 Jy/beam ! Combined flux in latest and established models = 0.578299 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 59 components and 0.578299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=7.391952Jy sigma=0.001181 ! Fit after self-cal, rms=7.392554Jy sigma=0.001181 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.969 mas, bmaj=15.04 mas, bpa=-9.317 degrees ! Estimated noise=2407.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00290058 Jy ! Component: 100 - total flux cleaned = -0.00328167 Jy ! Component: 150 - total flux cleaned = -0.00351334 Jy ! Component: 200 - total flux cleaned = -0.0037334 Jy ! Total flux subtracted in 200 components = -0.0037334 Jy ! Clean residual min=-0.009060 max=0.007793 Jy/beam ! Clean residual mean=-0.000472 rms=0.002467 Jy/beam ! Combined flux in latest and established models = 0.574566 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 0.574566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=7.392539Jy sigma=0.001181 ! Fit after self-cal, rms=7.392428Jy sigma=0.001181 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.691 mas, bmaj=7.257 mas, bpa=-14.47 degrees ! Estimated noise=3804.53 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.470538 Jy ! Component: 100 - total flux cleaned = 0.551315 Jy ! Component: 150 - total flux cleaned = 0.569779 Jy ! Component: 200 - total flux cleaned = 0.573167 Jy ! Total flux subtracted in 200 components = 0.573166 Jy ! Clean residual min=-0.017165 max=0.019833 Jy/beam ! Clean residual mean=-0.000116 rms=0.004593 Jy/beam ! Combined flux in latest and established models = 0.573166 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.573166 Jy ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=8.465 mas, bpa=-13.26 degrees ! Estimated noise=1847.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00160543 Jy ! Component: 100 - total flux cleaned = -0.00164633 Jy ! Component: 150 - total flux cleaned = -0.000821583 Jy ! Component: 200 - total flux cleaned = -0.000179129 Jy ! Total flux subtracted in 200 components = -0.000179129 Jy ! Clean residual min=-0.008710 max=0.006863 Jy/beam ! Clean residual mean=-0.000221 rms=0.002119 Jy/beam ! Combined flux in latest and established models = 0.572987 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 41 components and 0.572987 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.969 mas, bmaj=15.04 mas, bpa=-9.317 degrees ! Estimated noise=2407.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000766283 Jy ! Component: 100 - total flux cleaned = 0.000546841 Jy ! Component: 150 - total flux cleaned = 0.000354317 Jy ! Component: 200 - total flux cleaned = 0.000273758 Jy ! Total flux subtracted in 200 components = 0.000273758 Jy ! Clean residual min=-0.008766 max=0.006839 Jy/beam ! Clean residual mean=-0.000471 rms=0.002415 Jy/beam ! Combined flux in latest and established models = 0.573261 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.573261 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=8.465 mas, bpa=-13.26 degrees ! Estimated noise=1847.91 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000661344 Jy ! Component: 100 - total flux cleaned = 0.000878785 Jy ! Component: 150 - total flux cleaned = 0.000781647 Jy ! Component: 200 - total flux cleaned = 0.000700635 Jy ! Total flux subtracted in 200 components = 0.000700635 Jy ! Clean residual min=-0.008065 max=0.006311 Jy/beam ! Clean residual mean=-0.000210 rms=0.001980 Jy/beam ! Combined flux in latest and established models = 0.573962 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 0.573962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=7.392898Jy sigma=0.001180 ! Fit after self-cal, rms=7.393784Jy sigma=0.001180 wmodel J2138-2439_S_1997_08_27_yyk\_map.mod ! Writing 63 model components to file: J2138-2439_S_1997_08_27_yyk_map.mod wobs J2138-2439_S_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J2138-2439_S_1997_08_27_yyk_uvs.fits wwins J2138-2439_S_1997_08_27_yyk\_map.win ! wwins: Wrote 1 windows to J2138-2439_S_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00332466 Jy ! Component: 100 - total flux cleaned = -0.00535376 Jy ! Component: 150 - total flux cleaned = -0.0067975 Jy ! Component: 200 - total flux cleaned = -0.00783123 Jy ! Component: 250 - total flux cleaned = -0.00841553 Jy ! Component: 300 - total flux cleaned = -0.00878475 Jy ! Component: 350 - total flux cleaned = -0.00878624 Jy ! Component: 400 - total flux cleaned = -0.00887152 Jy ! Component: 450 - total flux cleaned = -0.00927004 Jy ! Component: 500 - total flux cleaned = -0.00972838 Jy ! Component: 550 - total flux cleaned = -0.0100244 Jy ! Component: 600 - total flux cleaned = -0.0103122 Jy ! Component: 650 - total flux cleaned = -0.0104512 Jy ! Component: 700 - total flux cleaned = -0.0107215 Jy ! Component: 750 - total flux cleaned = -0.0109823 Jy ! Component: 800 - total flux cleaned = -0.011108 Jy ! Component: 850 - total flux cleaned = -0.0112317 Jy ! Component: 900 - total flux cleaned = -0.0112946 Jy ! Component: 950 - total flux cleaned = -0.0115901 Jy ! Component: 1000 - total flux cleaned = -0.0118752 Jy ! Component: 1050 - total flux cleaned = -0.0120422 Jy ! Component: 1100 - total flux cleaned = -0.0123157 Jy ! Component: 1150 - total flux cleaned = -0.0125293 Jy ! Component: 1200 - total flux cleaned = -0.0128422 Jy ! Component: 1250 - total flux cleaned = -0.0131975 Jy ! Component: 1300 - total flux cleaned = -0.0134463 Jy ! Component: 1350 - total flux cleaned = -0.0139329 Jy ! Component: 1400 - total flux cleaned = -0.0143143 Jy ! Component: 1450 - total flux cleaned = -0.0147803 Jy ! Component: 1500 - total flux cleaned = -0.0150989 Jy ! Component: 1550 - total flux cleaned = -0.0155481 Jy ! Component: 1600 - total flux cleaned = -0.0160777 Jy ! Component: 1650 - total flux cleaned = -0.0165996 Jy ! Component: 1700 - total flux cleaned = -0.0172406 Jy ! Component: 1750 - total flux cleaned = -0.0177453 Jy ! Component: 1800 - total flux cleaned = -0.0181185 Jy ! Component: 1850 - total flux cleaned = -0.0186909 Jy ! Component: 1900 - total flux cleaned = -0.0192137 Jy ! Component: 1950 - total flux cleaned = -0.0197685 Jy ! Component: 2000 - total flux cleaned = -0.0201206 Jy ! Total flux subtracted in 2048 components = -0.0206225 Jy ! Clean residual min=-0.002590 max=0.002426 Jy/beam ! Clean residual mean=-0.000131 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.553339 Jy keep ! Adding 143 model components to the UV plane model. ! The established model now contains 206 components and 0.553339 Jy ![Exited script file: muppet] wmap "J2138-2439_S_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.22 x 8.465 at -13.26 degrees (North through East) ! Clean map min=-0.0055657 max=0.54902 Jy/beam ! Writing clean map to FITS file: J2138-2439_S_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.549024 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000773332 device "J2138-2439_S_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2138-2439_S_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.422567 0.422567 0.845134 1.69027 3.38054 6.76107 13.5221 27.0443 54.0886 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.549 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.22 x 8.465 at -13.26 degrees (North through East) ! Clean map min=-0.0055657 max=0.54902 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2138-2439_S_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2138-2439_S_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2138-2439_S_1997_08_27_yyk_uvs.log closed on Sun Jan 7 20:01:08 2007