! Started logfile: J2138-1810_S_1997_07_02_yyk_uvs.log on Sun Jan 7 20:00:37 2007 obs J2138-1810_S_1997_07_02_yyk_uva.fits ! Reading UV FITS file: J2138-1810_S_1997_07_02_yyk_uva.fits ! AN table 1: 149 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.889933 visibilities/baseline/integration-bin. ! Found source: J2138-1810 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22447e+09 8e+06 1 8e+06 ! 02 2 2.23447e+09 8e+06 1 8e+06 ! 03 3 2.29447e+09 8e+06 1 8e+06 ! 04 4 2.32447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 755 lines of history. ! ! Reading 23868 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2138-1810_S_1997_07_02_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.630172 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.83 mas, bmaj=18.32 mas, bpa=-10.32 degrees ! Estimated noise=1776 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.212685 Jy ! Component: 100 - total flux cleaned = 0.337557 Jy ! Total flux subtracted in 100 components = 0.337557 Jy ! Clean residual min=-0.045500 max=0.052194 Jy/beam ! Clean residual mean=0.000607 rms=0.021187 Jy/beam ! Combined flux in latest and established models = 0.337557 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 60 model components to the UV plane model. ! The established model now contains 60 components and 0.337557 Jy ! ! Correcting IF 1. ! A total of 483 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 339 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 339 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 339 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.540100Jy sigma=0.002518 ! Fit after self-cal, rms=0.538980Jy sigma=0.002513 ! Inverting map and beam ! Estimated beam: bmin=4.83 mas, bmaj=18.32 mas, bpa=-10.32 degrees ! Estimated noise=1776 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.957 mas, bmaj=19.79 mas, bpa=-7.206 degrees ! Estimated noise=1075.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.145958 Jy ! Component: 100 - total flux cleaned = 0.228618 Jy ! Component: 150 - total flux cleaned = 0.299296 Jy ! Component: 200 - total flux cleaned = 0.348648 Jy ! Total flux subtracted in 200 components = 0.348648 Jy ! Clean residual min=-0.029254 max=0.029434 Jy/beam ! Clean residual mean=0.000984 rms=0.016583 Jy/beam ! Combined flux in latest and established models = 0.686205 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 177 model components to the UV plane model. ! The established model now contains 234 components and 0.686205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.494653Jy sigma=0.002227 ! Fit after self-cal, rms=0.494290Jy sigma=0.002225 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.957 x 19.79 at -7.206 degrees (North through East) ! Clean map min=-0.04692 max=0.21403 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.995889 ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 1.09 HN 1.06 KP 0.94 ! LA 0.91 MK 1.00* NL 1.00* OV 0.96 ! PT 0.76 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.877737 ! Telescope amplitude corrections in sub-array 1: ! BR 1.46 FD 1.14 HN 2.18 KP 1.03 ! LA 0.99 MK 1.00* NL 0.94 OV 0.90 ! PT 0.74 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.0766 ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.03 HN 0.48 KP 0.98 ! LA 0.72 MK 1.00* NL 1.14 OV 0.81 ! PT 0.90 SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.813841 ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 1.06 HN 3.46 KP 1.04 ! LA 0.80 MK 1.00* NL 1.11 OV 0.80 ! PT 0.78 SC 1.00* ! ! ! Fit before self-cal, rms=0.494290Jy sigma=0.002225 ! Fit after self-cal, rms=0.516565Jy sigma=0.002259 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.516565Jy sigma=0.002259 ! Fit after self-cal, rms=0.516689Jy sigma=0.002259 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.695 mas, bmaj=23.35 mas, bpa=-8.08 degrees ! Estimated noise=836.434 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0527025 Jy ! Component: 100 - total flux cleaned = -0.0546618 Jy ! Component: 150 - total flux cleaned = -0.0519562 Jy ! Component: 200 - total flux cleaned = -0.0554867 Jy ! Total flux subtracted in 200 components = -0.0554867 Jy ! Clean residual min=-0.008117 max=0.008065 Jy/beam ! Clean residual mean=0.000013 rms=0.004047 Jy/beam ! Combined flux in latest and established models = 0.630718 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 100 model components to the UV plane model. ! The established model now contains 332 components and 0.630718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513593Jy sigma=0.002187 ! Fit after self-cal, rms=0.513498Jy sigma=0.002187 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513498Jy sigma=0.002187 ! Fit after self-cal, rms=0.512335Jy sigma=0.002180 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221271 Jy ! Component: 100 - total flux cleaned = 0.00237073 Jy ! Component: 150 - total flux cleaned = 0.00332232 Jy ! Component: 200 - total flux cleaned = 0.00374507 Jy ! Total flux subtracted in 200 components = 0.00374507 Jy ! Clean residual min=-0.005179 max=0.005167 Jy/beam ! Clean residual mean=0.000038 rms=0.002672 Jy/beam ! Combined flux in latest and established models = 0.634463 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 79 model components to the UV plane model. ! The established model now contains 409 components and 0.634463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.511566Jy sigma=0.002172 ! Fit after self-cal, rms=0.510909Jy sigma=0.002171 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.695 x 23.35 at -8.08 degrees (North through East) ! Clean map min=-0.015925 max=0.1634 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.510909Jy sigma=0.002171 ! Fit after self-cal, rms=0.660947Jy sigma=0.002106 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.660947Jy sigma=0.002106 ! Fit after self-cal, rms=0.660779Jy sigma=0.002106 ! Inverting map and beam ! Estimated beam: bmin=5.911 mas, bmaj=22.6 mas, bpa=-10.17 degrees ! Estimated noise=794.249 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247721 Jy ! Component: 100 - total flux cleaned = 0.00399185 Jy ! Component: 150 - total flux cleaned = 0.00493939 Jy ! Component: 200 - total flux cleaned = 0.00492742 Jy ! Total flux subtracted in 200 components = 0.00492742 Jy ! Clean residual min=-0.003570 max=0.003603 Jy/beam ! Clean residual mean=-0.000066 rms=0.001831 Jy/beam ! Combined flux in latest and established models = 0.639391 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 79 model components to the UV plane model. ! The established model now contains 488 components and 0.639391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.660535Jy sigma=0.002102 ! Fit after self-cal, rms=0.660364Jy sigma=0.002101 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.660364Jy sigma=0.002101 ! Fit after self-cal, rms=0.801482Jy sigma=0.002099 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.801482Jy sigma=0.002099 ! Fit after self-cal, rms=0.801554Jy sigma=0.002099 ! Inverting map and beam ! Estimated beam: bmin=5.792 mas, bmaj=22.36 mas, bpa=-11.27 degrees ! Estimated noise=792.39 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210307 Jy ! Component: 100 - total flux cleaned = 0.00446556 Jy ! Component: 150 - total flux cleaned = 0.00497951 Jy ! Component: 200 - total flux cleaned = 0.00496026 Jy ! Total flux subtracted in 200 components = 0.00496026 Jy ! Clean residual min=-0.002901 max=0.002895 Jy/beam ! Clean residual mean=-0.000069 rms=0.001454 Jy/beam ! Combined flux in latest and established models = 0.644351 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 80 model components to the UV plane model. ! The established model now contains 559 components and 0.644351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.801429Jy sigma=0.002096 ! Fit after self-cal, rms=0.801422Jy sigma=0.002096 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.029 mas, bmaj=24.55 mas, bpa=-8.232 degrees ! Estimated noise=860.223 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00449779 Jy ! Component: 100 - total flux cleaned = 0.00680314 Jy ! Component: 150 - total flux cleaned = 0.00775939 Jy ! Component: 200 - total flux cleaned = 0.00821918 Jy ! Total flux subtracted in 200 components = 0.00821918 Jy ! Clean residual min=-0.002767 max=0.002778 Jy/beam ! Clean residual mean=-0.000054 rms=0.001490 Jy/beam ! Combined flux in latest and established models = 0.65257 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 62 model components to the UV plane model. ! The established model now contains 618 components and 0.65257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.801307Jy sigma=0.002095 ! Fit after self-cal, rms=0.801136Jy sigma=0.002094 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.768 mas, bmaj=19.54 mas, bpa=-12.97 degrees ! Estimated noise=1439.5 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.175034 Jy ! Component: 100 - total flux cleaned = 0.277534 Jy ! Component: 150 - total flux cleaned = 0.349327 Jy ! Component: 200 - total flux cleaned = 0.403858 Jy ! Total flux subtracted in 200 components = 0.403858 Jy ! Clean residual min=-0.023293 max=0.024049 Jy/beam ! Clean residual mean=0.000234 rms=0.010734 Jy/beam ! Combined flux in latest and established models = 0.403858 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 118 model components to the UV plane model. ! The established model now contains 118 components and 0.403858 Jy ! Inverting map and beam ! Estimated beam: bmin=5.792 mas, bmaj=22.36 mas, bpa=-11.27 degrees ! Estimated noise=792.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0535607 Jy ! Component: 100 - total flux cleaned = 0.0943749 Jy ! Component: 150 - total flux cleaned = 0.115324 Jy ! Component: 200 - total flux cleaned = 0.131149 Jy ! Total flux subtracted in 200 components = 0.131149 Jy ! Clean residual min=-0.013590 max=0.013665 Jy/beam ! Clean residual mean=0.000220 rms=0.007509 Jy/beam ! Combined flux in latest and established models = 0.535007 Jy ! Adding 144 model components to the UV plane model. ! The established model now contains 255 components and 0.535007 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.029 mas, bmaj=24.55 mas, bpa=-8.232 degrees ! Estimated noise=860.223 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121507 Jy ! Component: 100 - total flux cleaned = 0.0162511 Jy ! Component: 150 - total flux cleaned = 0.0188402 Jy ! Component: 200 - total flux cleaned = 0.0166531 Jy ! Total flux subtracted in 200 components = 0.0166531 Jy ! Clean residual min=-0.008158 max=0.008162 Jy/beam ! Clean residual mean=0.000055 rms=0.004799 Jy/beam ! Combined flux in latest and established models = 0.551661 Jy ! Adding 138 model components to the UV plane model. ! The established model now contains 384 components and 0.551661 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.792 mas, bmaj=22.36 mas, bpa=-11.27 degrees ! Estimated noise=792.39 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00257958 Jy ! Component: 100 - total flux cleaned = -0.0063706 Jy ! Component: 150 - total flux cleaned = -0.00642125 Jy ! Component: 200 - total flux cleaned = -0.00798457 Jy ! Total flux subtracted in 200 components = -0.00798457 Jy ! Clean residual min=-0.004578 max=0.004554 Jy/beam ! Clean residual mean=0.000001 rms=0.002553 Jy/beam ! Combined flux in latest and established models = 0.543676 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 100 model components to the UV plane model. ! The established model now contains 482 components and 0.543676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.802023Jy sigma=0.002099 ! Fit after self-cal, rms=0.801964Jy sigma=0.002099 wmodel J2138-1810_S_1997_07_02_yyk\_map.mod ! Writing 482 model components to file: J2138-1810_S_1997_07_02_yyk_map.mod wobs J2138-1810_S_1997_07_02_yyk\_uvs.fits ! Writing UV FITS file: J2138-1810_S_1997_07_02_yyk_uvs.fits wwins J2138-1810_S_1997_07_02_yyk\_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2138-1810_S_1997_07_02_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.792 x 22.36 at -11.27 degrees (North through East) ! Clean map min=-0.018589 max=0.15407 Jy/beam ! Writing clean map to FITS file: J2138-1810_S_1997_07_02_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.154067 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00256896 device "J2138-1810_S_1997_07_02_yyk\_map.eps/VPS" ! Attempting to open device: 'J2138-1810_S_1997_07_02_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.00229 5.00229 10.0046 20.0091 40.0183 80.0366 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0077 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.154 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.792 x 22.36 at -11.27 degrees (North through East) ! Clean map min=-0.018589 max=0.15407 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2138-1810_S_1997_07_02_yyk\_map.gif/gif" ! Attempting to open device: 'J2138-1810_S_1997_07_02_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2138-1810_S_1997_07_02_yyk_uvs.log closed on Sun Jan 7 20:00:46 2007