! Started logfile: J2131-1207_X_1997_08_27_yyk_uvs.log on Mon Jan 8 10:26:59 2007 obs J2131-1207_X_1997_08_27_yyk_uva.fits ! Reading UV FITS file: J2131-1207_X_1997_08_27_yyk_uva.fits ! AN table 1: 54 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.765021 visibilities/baseline/integration-bin. ! Found source: J2131-1207 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.15447e+09 8e+06 1 8e+06 ! 02 2 8.23447e+09 8e+06 1 8e+06 ! 03 3 8.41447e+09 8e+06 1 8e+06 ! 04 4 8.55447e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 701 lines of history. ! ! Reading 7436 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2131-1207_X_1997_08_27_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.07157 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8947 mas, bmaj=4.181 mas, bpa=28.91 degrees ! Estimated noise=1857.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.7578 Jy ! Component: 100 - total flux cleaned = 2.09575 Jy ! Total flux subtracted in 100 components = 2.09575 Jy ! Clean residual min=-0.075979 max=0.106295 Jy/beam ! Clean residual mean=0.000719 rms=0.025147 Jy/beam ! Combined flux in latest and established models = 2.09575 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 2.09575 Jy ! ! Correcting IF 1. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.439692Jy sigma=0.002357 ! Fit after self-cal, rms=0.428274Jy sigma=0.002320 ! Inverting map and beam ! Estimated beam: bmin=0.8947 mas, bmaj=4.181 mas, bpa=28.91 degrees ! Estimated noise=1857.21 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.241 mas, bmaj=4.52 mas, bpa=27.13 degrees ! Estimated noise=1412.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.214051 Jy ! Component: 100 - total flux cleaned = 0.302398 Jy ! Component: 150 - total flux cleaned = 0.344039 Jy ! Component: 200 - total flux cleaned = 0.364464 Jy ! Total flux subtracted in 200 components = 0.364464 Jy ! Clean residual min=-0.031746 max=0.047639 Jy/beam ! Clean residual mean=0.000269 rms=0.011527 Jy/beam ! Combined flux in latest and established models = 2.46022 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 57 components and 2.46022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.371447Jy sigma=0.001842 ! Fit after self-cal, rms=0.368409Jy sigma=0.001828 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.241 x 4.52 at 27.13 degrees (North through East) ! Clean map min=-0.028387 max=2.0755 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.9994 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.09 KP 1.01 ! LA 1.02 MK 1.00* NL 1.00 OV 0.98 ! PT 0.97 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00025 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 1.06 KP 1.01 ! LA 0.99 MK 1.00* NL 1.00 OV 1.03 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.987195 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.11 KP 1.00 ! LA 1.01 MK 1.00* NL 0.99 OV 0.98 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.981409 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.10 KP 1.00 ! LA 1.01 MK 1.00* NL 0.99 OV 1.01 ! PT 1.01 SC 1.04 ! ! ! Fit before self-cal, rms=0.368409Jy sigma=0.001828 ! Fit after self-cal, rms=0.370675Jy sigma=0.001789 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.370675Jy sigma=0.001789 ! Fit after self-cal, rms=0.370684Jy sigma=0.001789 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.258 mas, bmaj=4.618 mas, bpa=27.31 degrees ! Estimated noise=1393.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0417316 Jy ! Component: 100 - total flux cleaned = -0.0501661 Jy ! Component: 150 - total flux cleaned = -0.0545218 Jy ! Component: 200 - total flux cleaned = -0.056581 Jy ! Total flux subtracted in 200 components = -0.0565809 Jy ! Clean residual min=-0.017440 max=0.041600 Jy/beam ! Clean residual mean=0.000202 rms=0.008343 Jy/beam ! Combined flux in latest and established models = 2.40364 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 74 components and 2.40364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.366421Jy sigma=0.001763 ! Fit after self-cal, rms=0.366138Jy sigma=0.001761 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.366138Jy sigma=0.001761 ! Fit after self-cal, rms=0.294733Jy sigma=0.001474 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.4, -9.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0469816 Jy ! Component: 100 - total flux cleaned = 0.0646344 Jy ! Component: 150 - total flux cleaned = 0.0713755 Jy ! Component: 200 - total flux cleaned = 0.0742008 Jy ! Total flux subtracted in 200 components = 0.0742008 Jy ! Clean residual min=-0.012115 max=0.015168 Jy/beam ! Clean residual mean=0.000090 rms=0.004084 Jy/beam ! Combined flux in latest and established models = 2.47784 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 47 model components to the UV plane model. ! The established model now contains 119 components and 2.47784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289483Jy sigma=0.001437 ! Fit after self-cal, rms=0.272741Jy sigma=0.001363 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.258 x 4.618 at 27.31 degrees (North through East) ! Clean map min=-0.011938 max=2.0633 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272741Jy sigma=0.001363 ! Fit after self-cal, rms=0.268992Jy sigma=0.001348 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.268992Jy sigma=0.001348 ! Fit after self-cal, rms=0.263849Jy sigma=0.001324 ! Inverting map and beam ! Estimated beam: bmin=1.26 mas, bmaj=4.608 mas, bpa=27.26 degrees ! Estimated noise=1388.96 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203266 Jy ! Component: 100 - total flux cleaned = 0.00447827 Jy ! Component: 150 - total flux cleaned = 0.00536165 Jy ! Component: 200 - total flux cleaned = 0.00535901 Jy ! Total flux subtracted in 200 components = 0.00535901 Jy ! Clean residual min=-0.010911 max=0.010954 Jy/beam ! Clean residual mean=0.000085 rms=0.003022 Jy/beam ! Combined flux in latest and established models = 2.4832 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 151 components and 2.4832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262675Jy sigma=0.001319 ! Fit after self-cal, rms=0.260301Jy sigma=0.001307 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260301Jy sigma=0.001307 ! Fit after self-cal, rms=0.259849Jy sigma=0.001303 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.259849Jy sigma=0.001303 ! Fit after self-cal, rms=0.258726Jy sigma=0.001298 ! Inverting map and beam ! Estimated beam: bmin=1.26 mas, bmaj=4.613 mas, bpa=27.26 degrees ! Estimated noise=1387.5 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000872404 Jy ! Component: 100 - total flux cleaned = -0.000883955 Jy ! Component: 150 - total flux cleaned = -0.000660384 Jy ! Component: 200 - total flux cleaned = -0.000664164 Jy ! Total flux subtracted in 200 components = -0.000664164 Jy ! Clean residual min=-0.010137 max=0.009381 Jy/beam ! Clean residual mean=0.000076 rms=0.002646 Jy/beam ! Combined flux in latest and established models = 2.48253 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 168 components and 2.48253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.258078Jy sigma=0.001296 ! Fit after self-cal, rms=0.257373Jy sigma=0.001292 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.387 mas, bmaj=5.293 mas, bpa=17.46 degrees ! Estimated noise=1554.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322111 Jy ! Component: 100 - total flux cleaned = 0.00386589 Jy ! Component: 150 - total flux cleaned = 0.00386833 Jy ! Component: 200 - total flux cleaned = 0.00410646 Jy ! Total flux subtracted in 200 components = 0.00410646 Jy ! Clean residual min=-0.010088 max=0.009291 Jy/beam ! Clean residual mean=0.000096 rms=0.002617 Jy/beam ! Combined flux in latest and established models = 2.48664 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 183 components and 2.48664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.257166Jy sigma=0.001292 ! Fit after self-cal, rms=0.256753Jy sigma=0.001290 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9011 mas, bmaj=4.233 mas, bpa=28.97 degrees ! Estimated noise=1849.46 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.75995 Jy ! Component: 100 - total flux cleaned = 2.09081 Jy ! Component: 150 - total flux cleaned = 2.2338 Jy ! Component: 200 - total flux cleaned = 2.31228 Jy ! Total flux subtracted in 200 components = 2.31228 Jy ! Clean residual min=-0.023350 max=0.033056 Jy/beam ! Clean residual mean=0.000244 rms=0.007644 Jy/beam ! Combined flux in latest and established models = 2.31228 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 2.31228 Jy ! Inverting map and beam ! Estimated beam: bmin=1.26 mas, bmaj=4.613 mas, bpa=27.26 degrees ! Estimated noise=1387.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.060716 Jy ! Component: 100 - total flux cleaned = 0.0962187 Jy ! Component: 150 - total flux cleaned = 0.119655 Jy ! Component: 200 - total flux cleaned = 0.136414 Jy ! Total flux subtracted in 200 components = 0.136414 Jy ! Clean residual min=-0.011517 max=0.013113 Jy/beam ! Clean residual mean=0.000140 rms=0.003512 Jy/beam ! Combined flux in latest and established models = 2.4487 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 77 components and 2.4487 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.387 mas, bmaj=5.293 mas, bpa=17.46 degrees ! Estimated noise=1554.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142098 Jy ! Component: 100 - total flux cleaned = 0.0235311 Jy ! Component: 150 - total flux cleaned = 0.0305469 Jy ! Component: 200 - total flux cleaned = 0.0349831 Jy ! Total flux subtracted in 200 components = 0.0349831 Jy ! Clean residual min=-0.009046 max=0.010702 Jy/beam ! Clean residual mean=0.000124 rms=0.002777 Jy/beam ! Combined flux in latest and established models = 2.48368 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 118 components and 2.48368 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.26 mas, bmaj=4.613 mas, bpa=27.26 degrees ! Estimated noise=1387.5 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275683 Jy ! Component: 100 - total flux cleaned = 0.00353065 Jy ! Component: 150 - total flux cleaned = 0.00375675 Jy ! Component: 200 - total flux cleaned = 0.00455998 Jy ! Total flux subtracted in 200 components = 0.00455998 Jy ! Clean residual min=-0.008309 max=0.009626 Jy/beam ! Clean residual mean=0.000076 rms=0.002383 Jy/beam ! Combined flux in latest and established models = 2.48824 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 141 components and 2.48824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256649Jy sigma=0.001289 ! Fit after self-cal, rms=0.256295Jy sigma=0.001288 wmodel J2131-1207_X_1997_08_27_yyk\_map.mod ! Writing 141 model components to file: J2131-1207_X_1997_08_27_yyk_map.mod wobs J2131-1207_X_1997_08_27_yyk\_uvs.fits ! Writing UV FITS file: J2131-1207_X_1997_08_27_yyk_uvs.fits wwins J2131-1207_X_1997_08_27_yyk\_map.win ! wwins: Wrote 2 windows to J2131-1207_X_1997_08_27_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019954 Jy ! Component: 100 - total flux cleaned = 0.00279064 Jy ! Component: 150 - total flux cleaned = 0.00326347 Jy ! Component: 200 - total flux cleaned = 0.00369006 Jy ! Component: 250 - total flux cleaned = 0.003983 Jy ! Component: 300 - total flux cleaned = 0.00416642 Jy ! Component: 350 - total flux cleaned = 0.00442702 Jy ! Component: 400 - total flux cleaned = 0.00442552 Jy ! Component: 450 - total flux cleaned = 0.00427052 Jy ! Component: 500 - total flux cleaned = 0.0040475 Jy ! Component: 550 - total flux cleaned = 0.00369018 Jy ! Component: 600 - total flux cleaned = 0.00355335 Jy ! Component: 650 - total flux cleaned = 0.00348759 Jy ! Component: 700 - total flux cleaned = 0.00323221 Jy ! Component: 750 - total flux cleaned = 0.00329398 Jy ! Component: 800 - total flux cleaned = 0.00317428 Jy ! Component: 850 - total flux cleaned = 0.00323364 Jy ! Component: 900 - total flux cleaned = 0.00334572 Jy ! Component: 950 - total flux cleaned = 0.00323491 Jy ! Component: 1000 - total flux cleaned = 0.00334369 Jy ! Component: 1050 - total flux cleaned = 0.00350165 Jy ! Component: 1100 - total flux cleaned = 0.00339912 Jy ! Component: 1150 - total flux cleaned = 0.00339977 Jy ! Component: 1200 - total flux cleaned = 0.00330215 Jy ! Component: 1250 - total flux cleaned = 0.0032548 Jy ! Component: 1300 - total flux cleaned = 0.00320766 Jy ! Component: 1350 - total flux cleaned = 0.00320674 Jy ! Component: 1400 - total flux cleaned = 0.0031602 Jy ! Component: 1450 - total flux cleaned = 0.0030698 Jy ! Component: 1500 - total flux cleaned = 0.00324798 Jy ! Component: 1550 - total flux cleaned = 0.00333573 Jy ! Component: 1600 - total flux cleaned = 0.0034223 Jy ! Component: 1650 - total flux cleaned = 0.00359196 Jy ! Component: 1700 - total flux cleaned = 0.00359154 Jy ! Component: 1750 - total flux cleaned = 0.00371617 Jy ! Component: 1800 - total flux cleaned = 0.00379826 Jy ! Component: 1850 - total flux cleaned = 0.00387884 Jy ! Component: 1900 - total flux cleaned = 0.0039187 Jy ! Component: 1950 - total flux cleaned = 0.00395801 Jy ! Component: 2000 - total flux cleaned = 0.00407499 Jy ! Total flux subtracted in 2048 components = 0.00419053 Jy ! Clean residual min=-0.002477 max=0.002358 Jy/beam ! Clean residual mean=0.000019 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 2.49243 Jy keep ! Adding 114 model components to the UV plane model. ! The established model now contains 255 components and 2.49243 Jy ![Exited script file: muppet] wmap "J2131-1207_X_1997_08_27_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.26 x 4.613 at 27.26 degrees (North through East) ! Clean map min=-0.0049884 max=2.0634 Jy/beam ! Writing clean map to FITS file: J2131-1207_X_1997_08_27_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.06342 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000734378 device "J2131-1207_X_1997_08_27_yyk\_map.eps/VPS" ! Attempting to open device: 'J2131-1207_X_1997_08_27_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.106771 0.106771 0.213542 0.427083 0.854166 1.70833 3.41666 6.83333 13.6667 27.3333 54.6666 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.063 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.26 x 4.613 at 27.26 degrees (North through East) ! Clean map min=-0.0049884 max=2.0634 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2131-1207_X_1997_08_27_yyk\_map.gif/gif" ! Attempting to open device: 'J2131-1207_X_1997_08_27_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2131-1207_X_1997_08_27_yyk_uvs.log closed on Mon Jan 8 10:27:05 2007