! Started logfile: J2131-1207_S_1996_08_10_yyk_uvs.log on Sun Jan 7 19:59:45 2007 obs J2131-1207_S_1996_08_10_yyk_uva.fits ! Reading UV FITS file: J2131-1207_S_1996_08_10_yyk_uva.fits ! AN table 1: 53 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.696017 visibilities/baseline/integration-bin. ! Found source: J2131-1207 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22049e+09 8e+06 1 8e+06 ! 02 2 2.23424e+09 8e+06 1 8e+06 ! 03 3 2.29424e+09 8e+06 1 8e+06 ! 04 4 2.32424e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 629 lines of history. ! ! Reading 6640 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2131-1207_S_1996_08_10_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.72879 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.511 mas, bmaj=6.873 mas, bpa=-1.22 degrees ! Estimated noise=2301.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.37329 Jy ! Component: 100 - total flux cleaned = 1.71852 Jy ! Total flux subtracted in 100 components = 1.71852 Jy ! Clean residual min=-0.097596 max=0.168493 Jy/beam ! Clean residual mean=0.004163 rms=0.034966 Jy/beam ! Combined flux in latest and established models = 1.71852 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.71852 Jy ! ! Correcting IF 1. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.542287Jy sigma=0.002111 ! Fit after self-cal, rms=0.455463Jy sigma=0.001821 ! Inverting map and beam ! Estimated beam: bmin=2.511 mas, bmaj=6.873 mas, bpa=-1.22 degrees ! Estimated noise=2301.23 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.862 mas, bmaj=7.713 mas, bpa=-3.774 degrees ! Estimated noise=1950.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.150765 Jy ! Component: 100 - total flux cleaned = 0.185415 Jy ! Component: 150 - total flux cleaned = 0.187028 Jy ! Component: 200 - total flux cleaned = 0.191671 Jy ! Total flux subtracted in 200 components = 0.191671 Jy ! Clean residual min=-0.088760 max=0.113197 Jy/beam ! Clean residual mean=0.002656 rms=0.023362 Jy/beam ! Combined flux in latest and established models = 1.91019 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 1.91019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.403273Jy sigma=0.001650 ! Fit after self-cal, rms=0.403305Jy sigma=0.001650 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.862 x 7.713 at -3.774 degrees (North through East) ! Clean map min=-0.085853 max=1.4432 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02611 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.08 HN 1.09 KP 1.00* ! LA 0.85 MK 0.93 NL 0.97 OV 1.08 ! PT 0.93 SC 0.85 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.979942 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.15 HN 1.22 KP 1.00* ! LA 0.95 MK 0.95 NL 1.05 OV 1.05 ! PT 0.91 SC 0.93 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.02963 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.05 HN 1.05 KP 1.00* ! LA 0.73 MK 0.84 NL 1.01 OV 0.98 ! PT 1.06 SC 1.07 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.981567 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.11 HN 1.16 KP 1.00* ! LA 0.85 MK 0.99 NL 1.15 OV 0.92 ! PT 0.99 SC 1.04 ! ! ! Fit before self-cal, rms=0.403305Jy sigma=0.001650 ! Fit after self-cal, rms=0.320827Jy sigma=0.001355 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.320827Jy sigma=0.001355 ! Fit after self-cal, rms=0.320909Jy sigma=0.001355 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.814 mas, bmaj=7.536 mas, bpa=-4.189 degrees ! Estimated noise=1914.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.5, -6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0696956 Jy ! Component: 100 - total flux cleaned = 0.0773484 Jy ! Component: 150 - total flux cleaned = 0.0749972 Jy ! Component: 200 - total flux cleaned = 0.0756843 Jy ! Total flux subtracted in 200 components = 0.0756843 Jy ! Clean residual min=-0.028284 max=0.034518 Jy/beam ! Clean residual mean=-0.000081 rms=0.007836 Jy/beam ! Combined flux in latest and established models = 1.98588 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 52 components and 1.98588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308274Jy sigma=0.001302 ! Fit after self-cal, rms=0.307295Jy sigma=0.001300 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307295Jy sigma=0.001300 ! Fit after self-cal, rms=0.304516Jy sigma=0.001287 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00956706 Jy ! Component: 100 - total flux cleaned = 0.00906358 Jy ! Component: 150 - total flux cleaned = 0.0090829 Jy ! Component: 200 - total flux cleaned = 0.00909501 Jy ! Total flux subtracted in 200 components = 0.00909501 Jy ! Clean residual min=-0.028313 max=0.031276 Jy/beam ! Clean residual mean=-0.000163 rms=0.007209 Jy/beam ! Combined flux in latest and established models = 1.99497 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 64 components and 1.99497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302854Jy sigma=0.001280 ! Fit after self-cal, rms=0.302052Jy sigma=0.001277 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.814 x 7.536 at -4.189 degrees (North through East) ! Clean map min=-0.028617 max=1.4285 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302052Jy sigma=0.001277 ! Fit after self-cal, rms=0.281905Jy sigma=0.001221 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281905Jy sigma=0.001221 ! Fit after self-cal, rms=0.281594Jy sigma=0.001220 ! Inverting map and beam ! Estimated beam: bmin=2.803 mas, bmaj=7.523 mas, bpa=-4.267 degrees ! Estimated noise=1901.31 mJy/beam. ! Added new window around map position (-38.5, 13.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0336598 Jy ! Component: 100 - total flux cleaned = 0.051613 Jy ! Component: 150 - total flux cleaned = 0.0631622 Jy ! Component: 200 - total flux cleaned = 0.0694036 Jy ! Total flux subtracted in 200 components = 0.0694036 Jy ! Clean residual min=-0.016217 max=0.014372 Jy/beam ! Clean residual mean=-0.000431 rms=0.004163 Jy/beam ! Combined flux in latest and established models = 2.06437 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 46 model components to the UV plane model. ! The established model now contains 106 components and 2.06438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278414Jy sigma=0.001205 ! Fit after self-cal, rms=0.278038Jy sigma=0.001204 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278038Jy sigma=0.001204 ! Fit after self-cal, rms=0.277161Jy sigma=0.001201 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277161Jy sigma=0.001201 ! Fit after self-cal, rms=0.277077Jy sigma=0.001201 ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=7.53 mas, bpa=-4.263 degrees ! Estimated noise=1903.19 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137278 Jy ! Component: 100 - total flux cleaned = 0.0192504 Jy ! Component: 150 - total flux cleaned = 0.0217735 Jy ! Component: 200 - total flux cleaned = 0.0232748 Jy ! Total flux subtracted in 200 components = 0.0232748 Jy ! Clean residual min=-0.013884 max=0.013210 Jy/beam ! Clean residual mean=-0.000411 rms=0.003493 Jy/beam ! Combined flux in latest and established models = 2.08765 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 132 components and 2.08765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276290Jy sigma=0.001198 ! Fit after self-cal, rms=0.276167Jy sigma=0.001197 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.921 mas, bmaj=14.89 mas, bpa=5.592 degrees ! Estimated noise=2568.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255114 Jy ! Component: 100 - total flux cleaned = 0.00254212 Jy ! Component: 150 - total flux cleaned = 0.00321505 Jy ! Component: 200 - total flux cleaned = 0.00360789 Jy ! Total flux subtracted in 200 components = 0.00360789 Jy ! Clean residual min=-0.013852 max=0.017580 Jy/beam ! Clean residual mean=-0.000984 rms=0.005486 Jy/beam ! Combined flux in latest and established models = 2.09126 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 147 components and 2.09126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276019Jy sigma=0.001197 ! Fit after self-cal, rms=0.275952Jy sigma=0.001197 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.47 mas, bmaj=6.796 mas, bpa=-1.486 degrees ! Estimated noise=2261.57 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.3899 Jy ! Component: 100 - total flux cleaned = 1.74779 Jy ! Component: 150 - total flux cleaned = 1.88489 Jy ! Component: 200 - total flux cleaned = 1.95669 Jy ! Total flux subtracted in 200 components = 1.95669 Jy ! Clean residual min=-0.025628 max=0.026666 Jy/beam ! Clean residual mean=0.000445 rms=0.007812 Jy/beam ! Combined flux in latest and established models = 1.95669 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 1.95669 Jy ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=7.53 mas, bpa=-4.263 degrees ! Estimated noise=1903.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0455201 Jy ! Component: 100 - total flux cleaned = 0.0740292 Jy ! Component: 150 - total flux cleaned = 0.0921438 Jy ! Component: 200 - total flux cleaned = 0.100014 Jy ! Total flux subtracted in 200 components = 0.100014 Jy ! Clean residual min=-0.014717 max=0.015355 Jy/beam ! Clean residual mean=-0.000229 rms=0.004081 Jy/beam ! Combined flux in latest and established models = 2.05671 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 68 components and 2.05671 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.921 mas, bmaj=14.89 mas, bpa=5.592 degrees ! Estimated noise=2568.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161511 Jy ! Component: 100 - total flux cleaned = 0.0220239 Jy ! Component: 150 - total flux cleaned = 0.0261419 Jy ! Component: 200 - total flux cleaned = 0.0286643 Jy ! Total flux subtracted in 200 components = 0.0286643 Jy ! Clean residual min=-0.014104 max=0.015825 Jy/beam ! Clean residual mean=-0.000902 rms=0.005164 Jy/beam ! Combined flux in latest and established models = 2.08537 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 94 components and 2.08537 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=7.53 mas, bpa=-4.263 degrees ! Estimated noise=1903.19 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00221337 Jy ! Component: 100 - total flux cleaned = -0.00268653 Jy ! Component: 150 - total flux cleaned = -0.00231898 Jy ! Component: 200 - total flux cleaned = -0.00137426 Jy ! Total flux subtracted in 200 components = -0.00137426 Jy ! Clean residual min=-0.012457 max=0.013074 Jy/beam ! Clean residual mean=-0.000362 rms=0.003346 Jy/beam ! Combined flux in latest and established models = 2.084 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 116 components and 2.084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276031Jy sigma=0.001197 ! Fit after self-cal, rms=0.275841Jy sigma=0.001197 wmodel J2131-1207_S_1996_08_10_yyk\_map.mod ! Writing 116 model components to file: J2131-1207_S_1996_08_10_yyk_map.mod wobs J2131-1207_S_1996_08_10_yyk\_uvs.fits ! Writing UV FITS file: J2131-1207_S_1996_08_10_yyk_uvs.fits wwins J2131-1207_S_1996_08_10_yyk\_map.win ! wwins: Wrote 3 windows to J2131-1207_S_1996_08_10_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00183327 Jy ! Component: 100 - total flux cleaned = -0.00241376 Jy ! Component: 150 - total flux cleaned = -0.00327894 Jy ! Component: 200 - total flux cleaned = -0.0039277 Jy ! Component: 250 - total flux cleaned = -0.00453474 Jy ! Component: 300 - total flux cleaned = -0.00510278 Jy ! Component: 350 - total flux cleaned = -0.00591176 Jy ! Component: 400 - total flux cleaned = -0.00680639 Jy ! Component: 450 - total flux cleaned = -0.00729456 Jy ! Component: 500 - total flux cleaned = -0.00776336 Jy ! Component: 550 - total flux cleaned = -0.00799184 Jy ! Component: 600 - total flux cleaned = -0.00853937 Jy ! Component: 650 - total flux cleaned = -0.00885578 Jy ! Component: 700 - total flux cleaned = -0.00905983 Jy ! Component: 750 - total flux cleaned = -0.00935512 Jy ! Component: 800 - total flux cleaned = -0.00945089 Jy ! Component: 850 - total flux cleaned = -0.00945191 Jy ! Component: 900 - total flux cleaned = -0.00945198 Jy ! Component: 950 - total flux cleaned = -0.00945058 Jy ! Component: 1000 - total flux cleaned = -0.00936642 Jy ! Component: 1050 - total flux cleaned = -0.009532 Jy ! Component: 1100 - total flux cleaned = -0.00945255 Jy ! Component: 1150 - total flux cleaned = -0.00921744 Jy ! Component: 1200 - total flux cleaned = -0.0091411 Jy ! Component: 1250 - total flux cleaned = -0.00899169 Jy ! Component: 1300 - total flux cleaned = -0.00906775 Jy ! Component: 1350 - total flux cleaned = -0.00921204 Jy ! Component: 1400 - total flux cleaned = -0.00956196 Jy ! Component: 1450 - total flux cleaned = -0.00949289 Jy ! Component: 1500 - total flux cleaned = -0.00962842 Jy ! Component: 1550 - total flux cleaned = -0.00989322 Jy ! Component: 1600 - total flux cleaned = -0.00989393 Jy ! Component: 1650 - total flux cleaned = -0.0101487 Jy ! Component: 1700 - total flux cleaned = -0.0101492 Jy ! Component: 1750 - total flux cleaned = -0.0103947 Jy ! Component: 1800 - total flux cleaned = -0.010394 Jy ! Component: 1850 - total flux cleaned = -0.0106323 Jy ! Component: 1900 - total flux cleaned = -0.0106897 Jy ! Component: 1950 - total flux cleaned = -0.0108047 Jy ! Component: 2000 - total flux cleaned = -0.0109734 Jy ! Total flux subtracted in 2048 components = -0.0109724 Jy ! Clean residual min=-0.002759 max=0.003810 Jy/beam ! Clean residual mean=-0.000007 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 2.07303 Jy keep ! Adding 124 model components to the UV plane model. ! The established model now contains 238 components and 2.07303 Jy ![Exited script file: muppet] wmap "J2131-1207_S_1996_08_10_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.804 x 7.53 at -4.263 degrees (North through East) ! Clean map min=-0.0066837 max=1.44 Jy/beam ! Writing clean map to FITS file: J2131-1207_S_1996_08_10_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.44002 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00112159 device "J2131-1207_S_1996_08_10_yyk\_map.eps/VPS" ! Attempting to open device: 'J2131-1207_S_1996_08_10_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.233661 0.233661 0.467323 0.934645 1.86929 3.73858 7.47716 14.9543 29.9087 59.8173 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.44 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.804 x 7.53 at -4.263 degrees (North through East) ! Clean map min=-0.0066837 max=1.44 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2131-1207_S_1996_08_10_yyk\_map.gif/gif" ! Attempting to open device: 'J2131-1207_S_1996_08_10_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2131-1207_S_1996_08_10_yyk_uvs.log closed on Sun Jan 7 19:59:50 2007